ebook img

Journal of Materials Processing Technology 2000: Vol 98 Index PDF

7 Pages·2000·1.5 MB·English
by  
Save to my drive
Quick download
Download
Most books are stored in the elastic cloud where traffic is expensive. For this reason, we have a limit on daily download.

Preview Journal of Materials Processing Technology 2000: Vol 98 Index

iO NS Journal of Materials Processing Technology a 1 ELSEVIER Journal of Materials Processing Technology 98 (2000) 343 www.elsevier.com/locate/jmatprotec Author Index of Volume 98 Ahmetoglu, M.A., 1, 7, 17, 25, 34, 41, 53, Hannan, D., 90 Paul, S., 299 224 Hauk, S., 65, 70 Petrossian, G.L., 335 Akgerman, N., 41 Higginson, R.L., 267 Posteraro, R.A., 7 Alrefai, J., 328 Hirschvogel, M., 171 Altan, T., 1, 7, 17, 25, 34, 41, 53, 70, 81, 90, Rieger, R., 252 99, 104, 116, 125, 212, 224. 232 Jianxin, D., 292 Rodriguez, C.A., 104, 116 Arvind, A., 205 Jirathearanat, S., 116 Schmoeckel, D., 65 Bandyopadhyay, B.P., 322 Kim, H., 143 Shatla, M., 125 Barnett, K.J., 162 Kinzel, G.L., 7, 17, 41 Shen, G., 189 Birker, T., 155 Kuhlmann, D., 182 Shulkin, L.B., 7 Bohnsack, R., 165 Siegert, K., 252, 260 Lambert, D., 205 Sokolowski, T., 34 Ceretti, E., 99 Lazzaroni, C., 99 Sutter, K., 224 Chattopadhyay, A.B., 299 Li, G., 205 Li, W., 322 Tanaka, K., 196 Davenport, S.B., 267 Li, X.J., 224 Tang, J., 205 Doege, E., 165 Liu, J., 1 Thomas, W., 232 Douglas, R., 182 Livatyali, H., 41, 53 Duggal, N., 53 Loésch, B., 252 Dutta, R.K., 299 Vazquez, V., 70, 81, 90, 116, 212 Miiderrisoglu, A., 41 Esche, S.K., 17 Makinouchi, A., 322 Wagner, S., 260 Mamalis, A.G., 335 Walters, J., 205 Fallbohmer, P., 104 Manolakos, D.E., 335 Worner, H., 171 Fujikawa, S., 176 Meidert, M., 150 Wu, W.-T., 205 Furrer, D., 189 Menegardo, L., 99 Yagi, T., 143 Gerke, K., 34 Nagele, H., 171 Yamanaka, M., 143 Goss, D.C., 135 Nakagawa, T., 245 Yeo, S.H., 317 Groenbaek, J., 155 Yoshimura, H., 196 Ozel, T., 104 Hansel, M., 150 Oenoki, T., 232 Zhan Qiang, L., 310 Haussermann, M., 252, 260 Ohmori, H., 322 Haller, D., 260 Ong, S.H., 317 Ziegler, M., 260 Elsevier Science S.A. PII: S0924-0136(99)00452-5 Journal of Materials Processing Technology Journal of Materials Processing Technology 98 (2000) 345-348 www.elsevier.com/locate/jmatprotec Subject Index of Volume 98 Accuracy Closed-loop control circuits Finite difference calculations of the deformations of multi-diameter Tendencies in presses and dies for sheet metal forming processes, workpieces during turning, 310 260 Guidelines for precision hot forging with applications, 182 Closing device Acetic acid Closed die technologies for hot forging, 165 Separation of scrap polyethylene pellets by density, 328 CNC programs Aerospace forging High-speed machining of cast iron and alloy steels for die and mold Manufacturing of aerospace forgings, 189 manufacturing, 104 Air compressor scrolls Cold forging Precision forging of aluminum and steel, 196 Net shape cold forging to close tolerances under qs 9000 aspects, Alliance strategy 150 Research initiatives for the forging industry, 162 New concepts in die design — physical and computer modeling Analytical modeling applications, 212 Analytical modeling of drilling and ball end milling, 125 Tool life in cold forging — an example of design improvement to Automotive assembly increase service life, 90 Improvement of hem quality by optimizing flanging and pre- Cold/warm forging hemming operations using computer aided die design, 41 Fe simulation as a must tool in cold/warm forging process and tool design, 143 Back-propagation algorithm Competition Applicability of the modified back-propagation algorithm in tool Research initiatives for the forging industry, 162 condition monitoring for faster convergence, 299 Composites Ball end milling Effect of thermal residual stress on the high temperature toughening Analytical modeling of drilling and ball end milling, 125 behaviour of tib2/sic,, composites, 292 Bauschinger effects Computer modeling Strain path effects under hot working: an introduction, 267 Manufacturing of aerospace forgings, 189 Blank holder force Cost reduction Blank holder force (bhf) control in viscous pressure forming (vpf) Automotive parts produced by optimizing the process flow forming of sheet metal, 7 — machining, 171 Cushion systems of presses CAD Tendencies in presses and dies for sheet metal forming processes, Improvement of hem quality by optimizing flanging and pre- 260 hemming operations using computer aided die design, 41 Cutting temperature Investigation of crack formation on the galvalume coating of roll Assessment of the thermal effects on chip surfaces, 317 formed roof panels, 53 CAE Deep drawing process Application of cae for hot-forging of automotive components, 176 Tendencies in presses and dies for sheet metal forming processes, Cast iron 260 High-speed machining of cast iron and alloy steels for die and mold Deep drawing with hydraulic counter pressure manufacturing, 104 Recent developments in hydroforming technology, 252 Centerless grinding DEFORM simulations Efficient and precision grinding of small hard and brittle cylindrical Evaluation of sheet metal formability, viscous pressure forming parts by the centerless grinding process combined with electro- (vpf) dome test, | discharge truing and electrolytic in-process dressing, 322 Deformation Ceramics Finite difference calculations of the deformations of multi-diameter Efficient and precision grinding of small hard and brittle cylindrical workpieces during turning, 310 parts by the centerless grinding process combined with electro- Die discharge truing and electrolytic in-process dressing, 322 Advances in prototype and low volume sheet forming and tooling, Cermet 245 Assessment of the thermal effects on chip surfaces, 317 Die design Chip colour Die design for flashless forging of complex parts, 81 Assessment of the thermal effects on chip surfaces, 317 Die life Closed die Application of cae for hot-forging of automotive components, Closed die technologies for hot forging, 165 176 Elsevier Science S.A. PII: S0924-0136(99)00453-7 346 Subject Index of Volume 98 Disk blanks Hemming Tooling and process control for splitting of disk blanks, 65 Improvement of hem quality by optimizing flanging and pre- Dome test hemming operations using computer aided die design, 41 Evaluation of sheet metal formability, viscous pressure forming High temperature (vpf) dome test, 1 Effect of thermal residual stress on the high temperature toughening Draw die design behaviour of tib2/sic,, composites, 292 Tendencies in presses and dies for sheet metal forming processes, Hot forging 260 Guidelines for precision hot forging with applications, 182 Drilling Hot working condition Analytical modeling of drilling and ball end milling, 125 Strain path effects under hot working: an introduction, 267 HSC technology Electro-discharge truing High-speed machining of cast iron and alloy steels for die and mold Efficient and precision grinding of small hard and brittle cylindrical manufacturing, 104 parts by the centerless grinding process combined with electro- Hydroforming discharge truing and electrolytic in-process dressing, 322 Evaluation of tube formability and material characteristics: hydrau- Electrolytic in-process dressing lic bulge testing of tubes, 34 Efficient and precision grinding of small hard and brittle cylindrical Hydroforming of double blanks parts by the centerless grinding process combined with electro- Recent developments in hydroforming technology, 252 discharge truing and electrolytic in-process dressing, 322 Hydroforming process Enclosed die forging Recent developments in hydroforming technology, 252 Precision forging of aluminum and steel, 196 Hydroforming technology Tube hydroforming: current research, applications and need for Fastener training, 224 High strength fasteners cold forged out of work hardening steel, 135 FE simulation Insert Fe simulation as a must tool in cold/warm forging process and tool Tool life in cold forging — an example of design improvement to design, 143 increase service life, 90 FE-model Finite element simulation of the flow-splitting-process, 70 Limit design FEM Limit design of porous sintered metal powder machine elements, Application of cae for hot-forging of automotive components, 176 335 Evaluation of tube formability and material characteristics: hydrau- Liquefied gas lic bulge testing of tubes, 34 Separation of scrap polyethylene pellets by density, 328 Improvement of hem quality by optimizing flanging and pre- hemming operations using computer aided die design, 41 Investigation of crack formation on the galvalume coating of roll Machining formed roof panels, 53 Automotive parts produced by optimizing the process flow forming Ferrules — machining, 171 Efficient and precision grinding of small hard and brittle cylindrical Material testing parts by the centerless grinding process combined with electro- Evaluation of tube formability and material characteristics: hydrau- discharge truing and electrolytic in-process dressing, 322 lic bulge testing of tubes, 34 Finite difference Metal behaviour Finite difference calculations of the deformations of multi-diameter Strain path effects under hot working: an introduction, 267 workpieces during turning, 310 Metal bonded superabrasive wheels Flashless forging Efficient and precision grinding of small hard and brittle Die design for flashless forging of complex parts, 81 cylindrical parts by the centerless grinding process combined Flow-Spitting-Process with electro-discharge truing and electrolytic in-process dres- Finite element simulation of the flow-splitting-process, 70 sing, 322 Tooling and process control for splitting of disk blanks, 65 Modified back-propagation algorithm for faster convergence Forging Applicability of the modified back-propagation algorithm in tool Application of cae for hot-forging of automotive components, 176 condition monitoring for faster convergence, 299 Automotive parts produced by optimizing the process flow forming Molding — machining, 171 Advances in prototype and low volume sheet forming and tooling, Forging industry 245 Research initiatives for the forging industry, 162 Forging process n-pentane Virtual processing — application of rapid prototyping for visualiza- Separation of scrap polyethylene pellets by density, 328 tion of metal forming processes, 116 Net shape forging Fracture toughness Precision forging of aluminum and steel, 196 Effect of thermal residual stress on the high temperature toughening Neural network behaviour of tib2/sic,, composites, 292 Applicability of the modified back-propagation algorithm in tool condition monitoring for faster convergence, 299 Gear forging Nitrogen cylinders Guidelines for precision hot forging with applications, 182 Tendencies in presses and dies for sheet metal forming processes, 260 Hardening steel Normal-shear strain path effects High strength fasteners cold forged out of work hardening steel, 135 Strain path effects under hot working: an introduction, 267 Subject Index of Volume 98 Oblique cutting Quality tools Turning simulations using a three-dimensional fem code, 99 Net shape cold forging to close tolerances under qs 9000 aspects, Orthogonal cutting 150 Turning simulations using a three-dimensional fem code, 99 Quench and temper heat treatment High strength fasteners cold forged out of work hardening steel, PAM-STAMP 135 Numerical and experimental investigation of redrawing of sheet metals, 17 Roll design Physical Modeling Investigation of crack formation on the galvalume coating of roll New concepts in die design — physical and computer modeling formed roof panels, 53 applications, 212 Roll forming Plasticine Investigation of crack formation on the galvalume coating of roll Application of cae for hot-forging of automotive components, 176 formed roof panels, 53 Plasticity Strain path effects under hot working: an introduction, 267 Section analysis in sheet metals Plasticity/porosity Numerical and experimental investigation of redrawing of sheet Limit design of porous sintered metal powder machine elements, metals, 17 335 SECTIONFORM Polyethylene pellets scrap Numerical and experimental investigation of redrawing of sheet Separation of scrap polyethylene pellets by density, 328 metals, 17 Porous filters Separation by density Limit design of porous sintered metal powder machine elements, Separation of scrap polyethylene pellets by density, 328 335 Sheet bending Porous materials Improvement of hem quality by optimizing flanging and pre- Limit design of porous sintered metal powder machine elements, hemming operations using computer aided die design, 41 335 Sheet metal Practical use Blank holder force (bhf) control in viscous pressure forming (vpf) Fe simulation as a must tool in cold/warm forging process and tool of sheet metal, 7 design, 143 Sheet metal forming Pre-form design Improvement of hem quality by optimizing flanging and pre- Tube hydroforming: current research, applications and need for hemming operations using computer aided die design, 41 training, 224 Sheet metal forming processes Pre-form geometry Virtual processing — application of rapid prototyping for visualiza- Tube hydroforming: state-of-the-art and future trends, 25 tion of metal forming processes, 116 Precision forging Simulation Guidelines for precision hot forging with applications, 182 Application of cae for hot-forging of automotive components, 176 Precision hot forging Splines Closed die technologies for hot forging, 165 Automotive parts produced by optimizing the process flow forming Press systems for hydroforming — machining, 171 Recent developments in hydroforming technology, 252 Splitting roll Process design Tooling and process control for splitting of disk blanks, 65 Fe simulation as a must tool in cold/warm forging process and tool Stamping design, 143 Process simulation in stamping — recent applications for product Process simulation in stamping — recent applications for product and process design, 232 and process design, 232 Strain path effects Process modeling Strain path effects under hot working: an introduction, 267 New concepts in die design — physical and computer modeling Strain space applications, 212 Strain path effects under hot working: an introduction, 267 Process stimulation Supporting roll Process simulation in stamping — recent applications for product Tooling and process control for splitting of disk blanks, 65 and process design, 232 Product design Tetralin Tube hydroforming: state-of-the-art and future trends, 25 Separation of scrap polyethylene pellets by density, 328 Prototype Three dimensional simulations Advances in prototype and low volume sheet forming and tooling, 245 Turning simulations using a three-dimensional fem code, 99 Prototyping Three-dimensional simulation Virtual processing — application of rapid prototyping for visualiza- Finite element simulation of the flow-splitting-process, 70 tion of metal forming processes, 116 Tool condition monitoring PVD coatings Applicability of the modified back-propagation algorithm in tool Assessment of the thermal effects on chip surfaces, 317 condition monitoring for faster convergence, 299 Tool design QS 9000 Die design for flashless forging of complex parts, 81 Net shape cold forging to close tolerances under qs 9000 aspects, Fe simulation as a must tool in cold/warm forging process and tool 150 design, 143 Quality planning Tube hydroforming Net shape cold forging to close tolerances under qs 9000 aspects, Tube hydroforming: current research, applications and need for 150 training, 224 348 Subject Index of Volume 98 Tube hydroforming technology Virtual processing Tube hydroforming: state-of-the-art and future trends, 25 Virtual processing — application of rapid prototyping for visualiza- Tubular products tion of metal forming processes, 116 Evaluation of tube formability and material characteristics: hydrau- Viscous pressure forming lic bulge testing of tubes, 34 Blank holder force (bhf) control in viscous pressure forming (vpf) Tungsten carbide of sheet metal, 7 Tool life in cold forging — an example of design improvement to Evaluation of sheet metal formability, viscous pressure forming increase service life, 90 (vpf) dome test, 1 Turning Finite difference calculations of the deformations of multi-diameter Whiskers workpieces during turning, 310 Effect of thermal residual stress on the high temperature toughening Turning simulations using a three-dimensional fem code, 99 behaviour of tib>/sic,, composites, 292 Work hardening rates Variables Strain path effects under hot working: an introduction, 267 Guidelines for precision hot forging with applications, 182

See more

The list of books you might like

Most books are stored in the elastic cloud where traffic is expensive. For this reason, we have a limit on daily download.