Table Of Content

"Jemma of Materials Processing aN Technology ELSEVIER Journal of Materials Processing Technology 97 (2000) 211 www.elsevier.com/locate/jmatprotec Author Index of Volume 97 Al-Habdan, S., 1 Kim, Y., 88 Shang, H.M., 82, 95 Al-Tamimi, A., 1 Kim, Y.H., 153 Shi, Q., 30 Kurita, T., 168 Shirizly, A., 61 Balendra, R., 194 Son, Y., 88 Lai, H.-Y., 174 Song, Y.H., 35 Cadirli, E., 74 Lai, W.-L., 200 Ceylan, M., 148 Lavrynenko, S.N., 126 Tagavi, K.A., 44 Chang, S.-H., 186 Lenard, J.G., 61 Teodosiu, C., 100 Cho, J.R., 153 Lim, T.C., 82, 95 Tian, X., 30 Chodnikiewicz, K., 194 Lin, H.Y., 200 Tsai, M.-H., 174 Lin, Z.-C., 200 Darwish, S.M., 1, 10 Liu, C.R., 200 Utsunomiya, H., 54 Diao, F.X., 35 Lo, Y.-L., 174 Dong, Y., 44 Lovell, M.R., 44 Verezub, N.V., 126 Doong, J.-L., 186 Mamalis, A.G., 120, 126 Wang, D., 69 Giindiiz, M., 74 Menezes, L.F., 100 Wang, Z.R., 35 Gadala, M.S., 132 Morita, N., 168 Wang, J., 114 Grabchenko, A.I., 120, 126 Wang, J., 132 Narayanasamy, R., 107, 110 Wang, Z., 69 Horvath, M., 120, 126 Nishimura, H., 54 Wu, C.W., 180 Hsu, R.Q., 180 Hwang, J.-R., 186 Oh, H.-K., 19 Yao, Y.L., 158 Ono, T., 168 Yoon, S.S., 153 Jeong, H.S., 153 Jeromin, A., 158 Pietro, P. Di, 158 Zengin, R., 148 Ponalagusamy, R., 107, 110 Zhang, K.F., 35 Kim, K.S., 153 Ramakrishna, S., 82, 95 Elsevier Science S.A. PII: S0924-0136(99)00400-8 Journal of Materials Processing Technology Journal of Materials Processing Technology 97 (2000) 213-215 www.elsevier.com/locate/jmatprotec Subject Index of Volume 97 Anisotropy Deformation-strain Strain field of deep drawn knitted fabric reinforced thermoplastic A mathematical theory of plasticity for compressible powder composite sheets, 95 metallurgy materials — Part II, 110 Study on wrinkling limit diagram of anisotropic sheet metals, 88 Design Arbitrary Lagrangian—Eulerian (ALE) method Effect of base profile of a DI beverage can and material properties Elasto-plastic finite element simulation of rolling and compression on the dome reversal pressure, 54 between wedge-shaped dies, 132 DI can base profile Automatic line Effect of base profile of a DI beverage can and material properties Deflection of a metal strip between elements of an automatic line, on the dome reversal pressure, 54 194 Diamond wheel Diamond grinding of super-hard materials, 120 m-bondings Directional solidification Physics of plasticity, 19 The dependence of lamellar spacing on growth rate and temperature Bottom growth gradient in the lead—tin eutectic alloy, 74 Effect of base profile of a DI beverage can and material properties Dome reversal pressure on the dome reversal pressure, 54 Effect of base profile of a DI beverage can and material properties on the dome reversal pressure, 54 CAE Drag force Optimization of the injection molding process of short glass fiber Mathematical modeling of the wall effect on drag forces in molding reinforced polycarbonate composites using grey relational ana- flow using optical fiber sensing data, 174 lysis, 186 Carbide inserts Electronics The effect of the multi-layer surface coating of carbide inserts on A knowledge-base for electronics soldering, | the cutting forces in turning operations, 114 Eutectic theory Ceramic material The dependence of lamellar spacing on growth rate and temperature Study on the relationship between laser processing sound and gradient in the lead-tin eutectic alloy, 74 material removal characteristics, 168 Composite sheets Fabric reinforcement Strain field of deep drawn knitted fabric reinforced thermoplastic Strain field of deep drawn knitted fabric reinforced thermoplastic composite sheets, 95 composite sheets, 95 Composites 3-D FEM Optimization of the injection molding process of short glass fiber 3-D FEM analysis of the temperature field and the thermal stress for reinforced polycarbonate composites using grey relational ana- plastics thermalforming, 35 lysis, 186 Finite element (FE) formulation methods Continuous extrusion forming Elasto-plastic finite element simulation of rolling and compression A study of the application of upper bound method to the CON- between wedge-shaped dies, 132 FORM process, 153 Finite elements Crystallization Three-dimensional numerical simulation of the deep-drawing pro- Physics of plasticity, 19 cess using solid finite elements, 100 Cutting forces Formability The effect of the multi-layer surface coating of carbide inserts on Simultaneous stretch forming and deep drawing in axisymmetrical the cutting forces in turning operations, 114 sheet forming, 82 Deep drawing Grey relational analysis Simultaneous stretch forming and deep drawing in axisymmetrical Optimization of the injection molding process of short glass fiber sheet forming, 82 reinforced polycarbonate composites using grey relational ana- Three-dimensional numerical simulation of the deep-drawing pro- lysis, 186 cess using solid finite elements, 100 Grinding Deflection Diamond grinding of super-hard materials, 120 Deflection of a metal strip between elements of an automatic line, 194 Hot cracking Deformation Preventing welding hot cracking by welding with an intensive Physics of plasticity, 19 trailing cooler, 30 Elsevier Science S.A. PII: S0924-0136(99)00401-X 214 Subject Index of Volume 97 Hot rolling Optimization The effect of lubrication on mill loads during hot rolling of low Optimization of the injection molding process of short glass fiber carbon steel strips, 61 reinforced polycarbonate composites using grey relational ana- Hydrostatic stress lysis, 186 A mathematical theory of plasticity for the upsetting of compres- Simultaneous stretch forming and deep drawing in axisymmetrical sible P/M materials, 107 sheet forming, 82 Orthogonal cutting condition The study of ultra-precision machining and residual stress for NIP Injection molding Optimization of the injection molding process of short glass fiber alloy with different cutting speeds and depth of cut, 200 reinforced polycarbonate composites using grey relational analysis, 186 Pb-Sn eutectic alloys Intensive trailing coojer The dependence of lamellar spacing on growth rate and temperature gradient in the lead-tin eutectic alloy, 74 Preventing welding hot cracking by welding with an intensive Plastics thermalforming trailing cooler, 30 3-D FEM analysis of the temperature field and the thermal stress for plastics thermalforming, 35 Knowledge base Poisson’s ratio A knowledge-base for electronics soldering, | A mathematical theory of plasticity for the upsetting of compressible P/M materials, 107 Lamellar spacings Polycarbonate The dependence of lamellar spacing on growth rate and temperature Optimization of the injection molding process of short glass fiber gradient in the lead-tin eutectic alloy, 74 reinforced polycarbonate composites using grey relational ana- Laser machining lysis, 186 Quality optimisation for laser machining under transient conditions, 158 Relative density Low and high frequency Q-switched YAG laser A mathematical theery of plasticity for compressible powder Study on the relationship between laser processing sound and metallurgy materials — Part II, 110 material removal characteristics, 168 A mathematical theory of plasticity for the upsetting of compres- Lubrication sible P/M materials, 107 The effect of lubrication on mill loads during hot rolling of low Relief control carbon steel strips, 61 Diamond grinding of super-hard materials, 120 Required power Machining A study of the application of upper bound method to the CON- The effect of the multi-layer surface coating of carbide inserts on FORM process, 153 the cutting forces in turning operations, 114 Main driving system Self-excited vibration Dynamic characteristics of a rolling mill drive system with backlash Dynamic characteristics of a rolling mill drive system with backlash in rolling slippage, 69 in rolling slippage, 69 Material removal volume Sheet forming Study on the relationship between laser processing sound and Strain field of deep drawn knitted fabric reinforced thermoplastic material removal characteristics, 168 composite sheets, 95 Metal strip Sheet metal forming Deflection of a metal strip between elements of an automatic line, Effect of base profile of a DI beverage can and material properties 194 on the dome reversal pressure, 54 Model-based optimisation Study on wrinkling limit diagram of anisotropic sheet metals, 88 Quality optimisation for laser machining under transient conditions, Side extrusion 158 A study of the application of upper bound method to the CON- Molding flow FORM process, 153 Mathematical modeling of the wall effect on drag forces in molding Simplified model flow using optical fiber sensing data, 174 A study of the application of upper bound method to the CON- FORM process, 153 NiP alloy Soldering The study of ultra-precision machining and residual stress for A knowledge-base for electronics soldering, 1 NIP alloy with different cutting speeds and depth of cut, Sound pressure level 200 Study on the relationship between laser processing sound and Numerical simulation material removal characteristics, 168 Preventing welding hot cracking by welding with an intensive Steel strips trailing cooler, 30 The effect of lubrication on mill loads during hot rolling of low Three-dimensional numerical simulation of the deep-drawing pro- carbon steel strips, 61 cess using solid finite elements, 100 Strain field Numerical solution Strain field of deep drawn knitted fabric reinforced thermoplastic Deflection of a metal strip between elements of an automatic line, composite sheets, 95 194 Strain-hardening Study on wrinkling limit diagram of anisotropic sheet metals, 88 Optical fiber sensors Stretch forming Mathematical modeling oft he wall effect on drag forces in molding Simultaneous stretch forming and deep drawing in axisymmetrical flow using optical fiber sensing data, 174 sheet forming, 82 Subject Index of Volume 97 Strip loop Turning Deflection of a metal strip between elements of an automatic line, The effect of the multi-layer surface coating of carbide inserts on 194 the cutting forces in turning operations, 114 Strip rolling Elasto-plastic finite element simulation of rolling and compression Ultra-precision cutting between wedge-shaped dies, 132 The study of ultra-precision machining and residual stress for Super-hard materials NIP alloy with different cutting speeds and depth of cut, Diamond grinding of super-hard materials, 120 200 Surface coatings Upper bound method The effect of the multi-layer surface coating of carbide inserts on A study of the application of upper bound method to the CON- the cutting forces in turning operations, 114 FORM process, 153 Temperature distribution Variable restraint fixture Preventing welding hot cracking by welding with an intensive Preventing welding hot cracking by welding with an intensive trailing cooler, 30 trailing cooler, 30 Temperature field 3-D FEM analysis of the temperature field and the thermal stress for Wall effect plastics thermalforming, 35 Mathematical modeling of the wall effect on drag forces in molding Thermal stress flow using optical fiber sensing data, 174 3-D FEM analysis of the temperature field and the thermal stress for Warpage plastics thermalforming, 35 3-D FEM analysis of the temperature field and the thermal stress for Thermo-elastic—plastic plastics thermalforming, 35 The study of ultra-precision machining and residual stress for NIP Wedge-shaped dies alloy with different cutting speeds and depth of cut, 200 Elasto-plastic finite element simulation of rolling and compression Torque amplification factor between wedge-shaped dies, 132 Dynamic characteristics of a rolling mill drive system with backlash Wringling limit diagram in rolling slippage, 69 Study on wrinkling limit diagram of anisotropic sheet metals, 88 Transient heat-transfer Quality optimisation for laser machining under transient conditions, Yield stress 158 A mathematical theory of plasticity for compressible powder Transient strain metallurgy materials — Part II, 110 Preventing welding hot cracking by welding with an intensive trailing cooler, 30