Journal of Manufacturing Science and Engineering 2000: Vol 122 Index

5 Pages·2000·1.2 MB·English

Journal of
Manufacturing
Science and
Engineering
{l/l authors of papers published in this volume are listed alphabeticaily Full titles are included in each first
author's entry Letters in parentheses follow some of the page numbers TB indicates Technical Brief, ft
indicates Errata, and D indicates Discussion
Abbasi, W. A., Ridgeway, S. C., Adsit, P. D., Crane, C. D., and Cheng, Shaowei — (see Zhang, Hongyan) 122, 501-510
Duffy, J. Investigation of a Special 6-6 Parallel Platform Cheung, Venus P. Y. (see Lee, Neville K. S.) 122, 350-359
for Contour Milling. 122, 132-139 Choi, Hoo-Gon R., Park, Man-Hee, and Salisbury, Erik Optimal
Adsit, P. D. (see Abbasi, W. A.) 122, 132-139 Tolerance Allocation With Loss Functions. 122, 529-535
Advani, S. G. (see Hsiao, K-T.) 122, 463-475 Clark, L. D., Davey, K., Rosindale, L, and Hinduja, S.
Akiyama, Masayoshi — (see Neishi, Yutaka) 122, 109-116 Determination of Heat Transfer Coefficients Using a 1-D Flow
Akiyama, Tetsuya (see Chen, Jun) 122, 304-309 Model Applied to Irregular Shaped Cooling Channels in
Altan, T. (see Shulkin, L. B.) 122, 781-789 Pressure Diecasting. 122, 678-690
Altintas, Y. — (see Ren, H.) 122, 650-659 Cohen, P. H. — (see Kamarthi, S. V.) 122, 12-19
Angspatt, V. Don — (see Skerlos, Steven J.) 122, 739-745 Cooper, William L., and Lavine, Adrienne S. Grinding Process
(see Skerlos, Steven J.) 122, 746-752 Size Effect and Kinematics Numerical Analysis. 122, 59-69
Aoshima, S. (see Shiraishi, M.) 122, 166—173 Crane, C. D. — (see Abbasi, W. A.) 122, 132-139
Baaijens, F. P. T. (see Goijaerts, A. M.) 122, 476-483 Danckert, J. {see Zhang, S. H.) 122, 235-243
Balakrishna, H. K. (see Subhas, B. K.) 122, 586-—590(TB) Davey, K. (see Bounds, S.) 122, 90-99
Barcenas, C. Carolina, and Griffin, Paul M. Parametric-Based (see Clark, L. D.) 122, 678-690
Determination of Cylindrical Variations in Geometric Demeri, M. Y. (see Hsu, C.-W.) 122, 717-724
Tolerancing 122, 549-555 Demetriou, Marios D., and Lavine, Adrienne S. - Thermal Aspects
Bates, Charles E. (see Sprague, Jeffrey A.) 122, 691-697 of Grinding: The Case of Upgrinding. 122, 605-611
Bergman, T. L. (see Kandis, M.) 122, 439-444 DeVor, R. E. (see Jacobus, Kurt) 122, 20-31
Bhat, Ramaraja — (see Subhas, B. K.) 122, 586 590( TB) (see Jayaram, S.) 122, 391-397
Bounds, S., Davey, K., and Hinduja, S. An Experimental and DeVor, Richard E. — (see Reddy, Rohit G.) 122, 398-405
Numerical Investigation into the Thermal Behavior of the (see Skerlos, Steven J.) 122, 739-74:
Pressure Die Casting Process. 122, 90-99 (see Skerlos, Steven J.) 122, 746-752
Bradley, C. — (see Chan, V. H.) 122, 725-733 Dixit, P. M. — (see Dixit, U. S.) 122, 494-500
(see Weir, D. J.) 122, 323-330 Dixit, U. S., and Dixit, P. M. Application of Fuzzy Set Theory in
Bruneel, Herman C. J. Intrinsic Errors on Sheet Strain the Scheduling of a Tandem Cold-Rolling Mill. 122, 494-500
Measurements Based on a Printed Square Grid. 122, 760-765 Dornfeld, D. A. — (see Chang, Y. P.) 122, 413-419
Bukkapatnam, S. T. S. — (see Kamarthi, S. V.) 122, 182-190 (see Guo, Y. B.) 122, 612-619
Busch-Vishniac, Ilene J. (see Tumer, Irem Y.) 122, 273-279 Duffy, J. (see Abbasi, W. A.) 122, 132-139
Dutta, Debasish — (see Kulkarni, Prashant) 122, 100-108
(see Yip-Hoi, Derek) 122, 543-548
Cardew-Hall, M. J. — (see Huang, A.) 122, 117-123
Ceglarek, D. (see Khan, A.) 122, 215-226
(see Rong, Q.) 122, 773-780 Elbestawi, M. A. (see El-Wardany, T. I.) 122, 632-641
Chan, V. H., Bradley, C., and Vickers, G. W. A Multi-Sensor (see Kishawy, H A.) 122, 620-631
Approach for Rapid Digitization and Daia Segmentation in Eleftheriou, Evangelos C. — (see Sprague, Jeffrey A.) 122, 691-697
Reverse Engineering. 122, 725-733 El-Wardany, T. L., Kishawy, H. A., and Elbestawi, M. A.
Chandra, A., Wang, K., Huang, Y., Subhash, G., Miller, M. H., and Surface Integrity of Die Material in High Speed Hard Machining,
Qu, W. Role of Unloading in Machining of Brittle Materials Part 2: Microhardness Variations and Residual Stresses
122, 452-462 122, 632-641
Chang, Y. P., Hashimura, M., and Dornfeld, D. A. An Endres, William J. (see Manjunathaiah, Jairam) 122, 384-390
Investigation of Material Removal Mechanisms in Lapping with Grain (see Ozdoganlar, O. Burak) 122, 660-665
Size Transition 122, 413-419 (see Schimmel, Roy J.) 122, 590-593(TB)
Chen, Cha’o-Kuang — (see Hsu, Pao-Tung) 122, 76-82 Evans, C. J. — (see Hwang, T. W.) 122, 32-41
Chen, J. R. — (see Hwang, Yeong-Maw) 122, 227-234 (see Hwang, T. W.) 122, 42-50
Chen, Jun, Terasaki, Toshio, Akiyama, Tetsuya, and Kishitake,
Katsuhiko New Concept of Equivalent Inherent Strain for
Measuring Axisymmetric Residual Stresses. 122, 304-309 Felix, Alejandro, Melkote, Shreyes N., and Matsumoto, Yoichi
Chen, Kai, Yao, Y. Lawrence, and Modi, Vijay — Gas Jet—Workpiece - Modeling of the Holding Force in an Electromagnetic
Interactions in Laser Machining. 122, 429-438 Chuck. 122, 569-575
Chen, Li (see Rao, S. S.) 122, 206-214 Feng, Chang-Xue (Jack), and Kusiak, Andrew - Robust Tolerance
Chen, Lin-Lin — (see Wang, Ming-En) 122, 536-542 Synthesis With the Design of Experiments Approach
Chen, Yubao — (see Orady, Elsayed) 122, 795-797(TB) 122, 520-528
798 / Vol. 122, NOVEMBER 2000 Transactions of the ASME
Journal of
Manufacturing
Science and
Engineering
{l/l authors of papers published in this volume are listed alphabeticaily Full titles are included in each first
author's entry Letters in parentheses follow some of the page numbers TB indicates Technical Brief, ft
indicates Errata, and D indicates Discussion
Abbasi, W. A., Ridgeway, S. C., Adsit, P. D., Crane, C. D., and Cheng, Shaowei — (see Zhang, Hongyan) 122, 501-510
Duffy, J. Investigation of a Special 6-6 Parallel Platform Cheung, Venus P. Y. (see Lee, Neville K. S.) 122, 350-359
for Contour Milling. 122, 132-139 Choi, Hoo-Gon R., Park, Man-Hee, and Salisbury, Erik Optimal
Adsit, P. D. (see Abbasi, W. A.) 122, 132-139 Tolerance Allocation With Loss Functions. 122, 529-535
Advani, S. G. (see Hsiao, K-T.) 122, 463-475 Clark, L. D., Davey, K., Rosindale, L, and Hinduja, S.
Akiyama, Masayoshi — (see Neishi, Yutaka) 122, 109-116 Determination of Heat Transfer Coefficients Using a 1-D Flow
Akiyama, Tetsuya (see Chen, Jun) 122, 304-309 Model Applied to Irregular Shaped Cooling Channels in
Altan, T. (see Shulkin, L. B.) 122, 781-789 Pressure Diecasting. 122, 678-690
Altintas, Y. — (see Ren, H.) 122, 650-659 Cohen, P. H. — (see Kamarthi, S. V.) 122, 12-19
Angspatt, V. Don — (see Skerlos, Steven J.) 122, 739-745 Cooper, William L., and Lavine, Adrienne S. Grinding Process
(see Skerlos, Steven J.) 122, 746-752 Size Effect and Kinematics Numerical Analysis. 122, 59-69
Aoshima, S. (see Shiraishi, M.) 122, 166—173 Crane, C. D. — (see Abbasi, W. A.) 122, 132-139
Baaijens, F. P. T. (see Goijaerts, A. M.) 122, 476-483 Danckert, J. {see Zhang, S. H.) 122, 235-243
Balakrishna, H. K. (see Subhas, B. K.) 122, 586-—590(TB) Davey, K. (see Bounds, S.) 122, 90-99
Barcenas, C. Carolina, and Griffin, Paul M. Parametric-Based (see Clark, L. D.) 122, 678-690
Determination of Cylindrical Variations in Geometric Demeri, M. Y. (see Hsu, C.-W.) 122, 717-724
Tolerancing 122, 549-555 Demetriou, Marios D., and Lavine, Adrienne S. - Thermal Aspects
Bates, Charles E. (see Sprague, Jeffrey A.) 122, 691-697 of Grinding: The Case of Upgrinding. 122, 605-611
Bergman, T. L. (see Kandis, M.) 122, 439-444 DeVor, R. E. (see Jacobus, Kurt) 122, 20-31
Bhat, Ramaraja — (see Subhas, B. K.) 122, 586 590( TB) (see Jayaram, S.) 122, 391-397
Bounds, S., Davey, K., and Hinduja, S. An Experimental and DeVor, Richard E. — (see Reddy, Rohit G.) 122, 398-405
Numerical Investigation into the Thermal Behavior of the (see Skerlos, Steven J.) 122, 739-74:
Pressure Die Casting Process. 122, 90-99 (see Skerlos, Steven J.) 122, 746-752
Bradley, C. — (see Chan, V. H.) 122, 725-733 Dixit, P. M. — (see Dixit, U. S.) 122, 494-500
(see Weir, D. J.) 122, 323-330 Dixit, U. S., and Dixit, P. M. Application of Fuzzy Set Theory in
Bruneel, Herman C. J. Intrinsic Errors on Sheet Strain the Scheduling of a Tandem Cold-Rolling Mill. 122, 494-500
Measurements Based on a Printed Square Grid. 122, 760-765 Dornfeld, D. A. — (see Chang, Y. P.) 122, 413-419
Bukkapatnam, S. T. S. — (see Kamarthi, S. V.) 122, 182-190 (see Guo, Y. B.) 122, 612-619
Busch-Vishniac, Ilene J. (see Tumer, Irem Y.) 122, 273-279 Duffy, J. (see Abbasi, W. A.) 122, 132-139
Dutta, Debasish — (see Kulkarni, Prashant) 122, 100-108
(see Yip-Hoi, Derek) 122, 543-548
Cardew-Hall, M. J. — (see Huang, A.) 122, 117-123
Ceglarek, D. (see Khan, A.) 122, 215-226
(see Rong, Q.) 122, 773-780 Elbestawi, M. A. (see El-Wardany, T. I.) 122, 632-641
Chan, V. H., Bradley, C., and Vickers, G. W. A Multi-Sensor (see Kishawy, H A.) 122, 620-631
Approach for Rapid Digitization and Daia Segmentation in Eleftheriou, Evangelos C. — (see Sprague, Jeffrey A.) 122, 691-697
Reverse Engineering. 122, 725-733 El-Wardany, T. L., Kishawy, H. A., and Elbestawi, M. A.
Chandra, A., Wang, K., Huang, Y., Subhash, G., Miller, M. H., and Surface Integrity of Die Material in High Speed Hard Machining,
Qu, W. Role of Unloading in Machining of Brittle Materials Part 2: Microhardness Variations and Residual Stresses
122, 452-462 122, 632-641
Chang, Y. P., Hashimura, M., and Dornfeld, D. A. An Endres, William J. (see Manjunathaiah, Jairam) 122, 384-390
Investigation of Material Removal Mechanisms in Lapping with Grain (see Ozdoganlar, O. Burak) 122, 660-665
Size Transition 122, 413-419 (see Schimmel, Roy J.) 122, 590-593(TB)
Chen, Cha’o-Kuang — (see Hsu, Pao-Tung) 122, 76-82 Evans, C. J. — (see Hwang, T. W.) 122, 32-41
Chen, J. R. — (see Hwang, Yeong-Maw) 122, 227-234 (see Hwang, T. W.) 122, 42-50
Chen, Jun, Terasaki, Toshio, Akiyama, Tetsuya, and Kishitake,
Katsuhiko New Concept of Equivalent Inherent Strain for
Measuring Axisymmetric Residual Stresses. 122, 304-309 Felix, Alejandro, Melkote, Shreyes N., and Matsumoto, Yoichi
Chen, Kai, Yao, Y. Lawrence, and Modi, Vijay — Gas Jet—Workpiece - Modeling of the Holding Force in an Electromagnetic
Interactions in Laser Machining. 122, 429-438 Chuck. 122, 569-575
Chen, Li (see Rao, S. S.) 122, 206-214 Feng, Chang-Xue (Jack), and Kusiak, Andrew - Robust Tolerance
Chen, Lin-Lin — (see Wang, Ming-En) 122, 536-542 Synthesis With the Design of Experiments Approach
Chen, Yubao — (see Orady, Elsayed) 122, 795-797(TB) 122, 520-528
798 / Vol. 122, NOVEMBER 2000 Transactions of the ASME
Fink, B. K. — (see Hsiao, K-T.) 122, 463-475 Jacobus, Kurt, DeVor, R. E., and Kapoor, S. G. — Machining-Induced
Frey, Daniel D., Otto, Kevin N., and Wysocki, Joseph A. Residual Stress: Experimentation and Modeling. 122, 20-31
- Evaluating Process Capability During the Design of Manufacturing Jayaram, S., Kapoor, S. G., and DeVor, R. E. — Analytical Stability
Systems. 122, 513-519 Analysis of Variable Spindle Speed Machining. 122, 391-397
Fujii, Hiroshi — (see Kato, T.) 122, 297-303 Jin, Jionghua, and Shi, Jianjun — Diagnostic Feature Extraction From
Fujimoto, H., and Sebaaly, M. F. — A New Sequence Evolution Stamping Tonnage Signals Based on Design of Experiments
Approach to Assembly Planning. 122, 198-205 122, 360-369
Joneja, Ajay — (see Lee, Neville K. S.) 122, 350-359
Gargiulo, Edward P. — (see Li, Yun) 122, 316-322
Gillespie, J. W., Jr. — (see Hsiao, K-T.) 122, 463-475 Kamarthi, S. V., Bukkapatnam, S. T. S., and Hsieh, S. — An
Goijaerts, A. M., Govaert, L. E., and Baaijens, F. P. T. — Prediction Algorithm for a Near Optimal NC Path Generation in
of Ductile Fracture in Metal Blanking. 122, 476-483 Staircase (Lase) Traversal of Convex Polygonal Surfaces
Gong, Chunhe, Yuan, Jingxia, and Ni, Jun — A Self-Calibration 122, 182-190
Method for Robotic Measurement System. 122, 174-181 , Kumara, S. R. T., and Cohen, P. H. Flank Wear
Govaert, L. E. — (see Goijaerts, A. M.) 122, 476-483 Estimation in Turning Through Wavelet Representation of Acoustic
Graham, G. M., Ume, Il. Charles, and Hopko, S. N. — Laser Array/ Emission Signals. 122, 12-19
EMAT Ultrasonic Measurement of the Penetration Depth in a Kandis, M., and Bergman, T. L. A Simulation-Based Correlation of
Liquid Weld Pool. 122, 70-75 the Density and Thermal Conductivity of Objects Produced by
Griffin, Paul M. (see Barcenas, C Carolina) 122, 549-555 Laser Sintering of Polymer Powders. 122, 439-444
Groombridge, P., Oloyede, A., and Siores, E. A Control System Kannatey-Asibu, Elijah, Jr. — (see Tsai, Fuu-Ren) 122, 420-428
for Microwave Processing of Materials. 122, 253-261 Kapoor, S. G. — (see Jacobus, Kurt) 122, 20-31
Guo, Y. B., and Dornfeld, D. A. — Finite Element Modeling of Burr (see Jayaram, S.) 122, 391-397
Formation Process in Drilling 304 Stainless Steel. 122, 612-619 Kapoor, Shiv G. — (see Reddy, Rohit G.) 122, 398-405
(see Skerlos, Steven J.) 122, 739-745
(see Skerlos, Steven J.) 122, 746-752
Hashimura, M. — (see Chang, Y. P.) 122, 413-419 Kato, T., and Fujii, Hiroshi Temperature Measurement of
Hayhurst, D. R. — (see Khan, W. A.) 122, 244-252 Workpieces in Conventional Surface Grinding. 122, 297-303
Hinduja, S. — (see Bounds, S.) 122, 90-99 Keefe, Michael — (see Li, Yun) 122, 316-322
(see Clark, L. D.) 122, 678-690 Khan, A., and Ceglarek, D. Sensor Optimization for Fault
Hirao, M. — (see Yan, X.) 122, 556-561 Diagnosis in Multi-Fixture Assembly Systems With Distributed
Hon, Keith K. C. (see Lee, Neville K. S.) 122, 350-359 Sensing. 122, 215-226
Hopko, S. N. — (see Graham, G. M.) 122, 70-75 Khan, W. A., and Hayhurst, D. R. ~ Two- and Three-Dimensional
Hsiao, K-T., Mathur, R., Advani, S. G., Gillespie, J. W., Jr., and Path Optimization for Production Machinery. 122, 244-252
Fink, B. K. \ Closed Form Solution for Flow During the Kim, Jinwook, Park, Changbeom, Kim, Jongwon, and Park, F. C.
Vacuum Assisted Resin Transfer Molding Process. 122, 463-475 Performance Analysis of Parallel Mechanism Architectures
Hsieh, Jung-Fa — (see Lin, Psang Dain) 122, 149-157 for CNC Machining Applications. 122, 753-759
Hsieh, S. — (see Kamarthi, S. V.) 122, 182-190 Kim, Jongwon — (see Kim, Jinwook) 122, 753-759
Hsu, C.-W., Ulsoy, A. G., and Demeri, M. Y. — An Approach for Kinzel, G. L. — (see Shulkin, L. B.) 122, 781-789
Modeling Sheet Metal Forming for Process Controller Design. Kishawy, H. A., and Elbestawi, M. A. — Surface Integrity of Die
122, 717-724 Material in High Speed Hard Machining, Part 1: Micrographical
Hsu, Pao-Tung, Yang, Yue-Tzu, and Chen, Cha’o-Kuang — A Three- Analysis. 122, 620-631
Dimensional Inverse Problem of Estimating the Surface Thermal (see El-Wardany, T. 1.) 122, 632-641
Behavior ef the Working Roll in Rolling Process. Kishitake, Katsuhiko — (see Chen, Jun) 122, 304-309
122, 76-82 Komanduri, Ranga — /N MEMORIAM. 122, |-2
Hu, S. Jack (see Li, Wei) 122, 511-512 Kulkarni, Prashant, and Dutta, Debasish — On the Integration of
(see Zhang, Hongyan) 122, 501-510 Layered Manufacturing and Material Removal Processes.
Huang, A., Cardew-Hall, M. J., and Lowe, A. — Sheet Thickness 122, 100-108
Optimization for Superplastic Forming of Engineering Kumara, S. R. T. — (see Kamarthi, S. V.) 122, 12-19
Structures. 122, 117-123 Kuroda, Kouichi — (see Neishi, Yutaka) 122, 109-116
Huang, Y. (see Chandra, A.) 122, 452—462 Kusiak, Andrew — (see Feng, Chang-Xue (Jack)) 122, 520-528
Hwang, T. W., Evans, C. J., and Malkin, S. — High Speed Grinding
of Silicon Nitride With Electroplated Diamond Wheels, Part 2:
Wheel Topography and Grinding Mechanisms. 122, 42-50
Lavine, Adrienne S. — (see Cooper, William L.) 122, 59-69
, Evans, C. J., Whitenton, E. P., and Malkin, S. — High Speed
(see Demetriou, Marios D.) 122, 605-611
Grinding of Silicon Nitride With Electroplated Diamond Wheels,
Lazoglu, Ismail, and Liang, Steven Y. — Modeling of Ball-End
Part 1: Wear and Wheel Life. 122, 32-41
Milling Forces With Cutter Axis Inclination. 122, 3-11
Hwang, Yeong-Maw, Lin, Hung-Jiun, and Chen, J. R. — A General
Velocity Field for Shape Rolling of a V-Sectioned Sheet. Lee, G., Mou, J., and Shen, Y. — Decoupling the Confounded Effect
122, 227-234 of Machine Error and Geometric Characteristics of Artifacts in
Precision Measurement and Machine Calibration. 122, 331-337
Lee, James D., Manzari, Majid T., Shen, Yin-Lin, and Zeng, Wenjun
— A Finite Element Approach to Transient Thermal Analysis of
Im, Yong-Tai — (see Walczyk, Daniel F.) 122, 562-568 Work Rolls in Rolling Process. 122, 706-716
Incropera, Frank P. — (see Rozzi, Jay C.) 122, 666-670
Lee, Neville K. S., Hon, Keith K. C., Cheung, Venus P. Y., and
Indacochea, J. E. — (see Wojnowski, D.) 122, 310-315 Joneja, Ajay — Effect of Datum Securing Method on
Precision of Mechanical Alignment System. 122, 350-359
Li, H. — (see Zheng, Y.) 122, 377-383
Jackman, John — (see Yang, Tai-Hung) 122, 262—272 Li, Songnian — (see Orady, Elsayed) 122, 795—797(TB)
Journal of Manufacturing Science and Engineering NOVEMBER 2000, Vol. 122 / 799
Li, Wei, Hu, S. Jack, and Ni, ot On-line Quality Estimation in Park, F. C. (see Kim, Jinwook) 122, 753-759
Resistance Spot Welding. 122, 5 512 Park, J. D. — (see Soyama, H.) 122, 83-89
Li, Wenchuan, and Yao, Y. Lawrence Numerical and Experimental Park, Man-Hee — (see Choi, Hoo-Gon R.) 122, 529-535
Study of Strain Rate Effects in Laser Forming. 122, 445-451 Peascoe, Roberta A. (see Thiele, Jeffrey D.) 122, 642-649
Li, Yun, Gargiulo, Edward P., and Keefe, Michael Studies in Peng, Xianghe — (see Zhang, Bi) 122, 51-58
Direct Tooling Using Stereolithography 122, 316-322 Pfefferkorn, Frank E. — (see Rozzi, Jay C.) 122, 666-670
Liang, Steven Y. (see Lazoglu, Ismail) 122, 3-11 Pitchumani, R. (see Ramakrishnan, B.) 122, 124-131
Liao, Te-tan (see Lin, Psang Dain) 122, 338-349 Poulachon, Gerard, and Moisan, Alphonse L. Hard Turning: Chip
Lin, Hung-Jiun (see Hwang, Yeong-Maw) 122 » 227-234 Formation Mechanisms and Metallurgical Aspects. 122, 406-412
Lin, Psang Dain, and Hsieh, Jung-Fa Dimension Inspection of
Spatial Cams by CNC Coordinate Measuring Machines
122, 149-157 Qu, W. — (see Chandra, A.) 122, 452-462
, and Liao, Te-tan Skew Ray Tracing and Sensitivity
Analysis of Geometrical Optics. 122, 338-349
Liu, Lixin (see Zhuang, Hangi) 122, 140-148
Longtin, Randy S. (see W ca Daniel F.) 122, 766-772 Rajagopalan, N (see Skerlos, Steven J.) 122, 739-745
Lowe, A. (see Huang A.) 122, 117-123 (see Skerlos, Steven J.) 122, 746-752
Raju, Vinay (see Walczyk . Daniel F.) 122, 370-—373(TB)
Ramachandra, K. — (see Subhas, B. K.) 122, 586-590(TB)
Ramakrishnan, B., Zhu, L., and Pitchumani, R. Curing of
Ma, Liqun (see Zhang, Guangjun) a 73> 4-77328
Composites Using Internal Resistive Heating. 122, 124-131
Malkin, S. — (see Hwang, T. W.) 122, 32-41
Ramasubramanian, M. K., and Shmagin, Dmitry L. An
(see Hwang, T. W.) 122, 42-50
Experimental Investigation of the Creping Process in Low-
Manjunathaiah, Jairam, and Endres, William J. A New Model
Density Paper Manufacturing. 122, 576-581
and Analysis of Orthogonal Machining With an Edge-Radiused
Rao, Aarthi — (see Sarma, Radha) 122, 191-197
Tool. 122, 384-390
Rao, S. S., and Chen, Li Determination of Optimal Machining
(see Schimmel, Roy J.) 122, 590-—593(TB)
Conditions: A Coupled Uncertainty Model. 122, 206-214
Manzari, Majid T. {see I ALC, James D.) 122, 706-716 Reddy, Rohit G., Kapoor, Shiv G., and DeVor, Richard E.
Masory, Oren — (see Zhuang, Hangi) 122, 140-148
Mechanistic Force Model for Contour Turning. 122, 398-405
Mathur, R. (see Hsiao, K-T.) 122, 463-475
Ren, H., and Altintas, Y. Mechanics of Machining With Chamfered
Matsumoto, Yoichi (see Felix, Alejandro) 122, 569-575
Tools. 122, 650—659
Melkote, Shreyes N. {see Felix, Alejandro) 122, 569-575 Ridgeway, S. C. — (see Abbasi, W. A.) 122, 132-139
(see Thiele, Jeffrey D.) 122, 642-649
Rong, Q., Ceglarek, D., and Shi, J. Dimensional Fault Diagnosis
Mendelsohn, D. A. (see Shulkin, I he ) 23, 781-789
for Compliant Beam Structure Assemblies. 122, 773-780
Miller, Vi. H. (see Chandra, A.) = . 452-462
Rosindale, I. — (see Clark, L. D.) 122, 678-690
Milroy, M. J. — (see Weir, D. J.) 12 3233-- 330
Roth, John T., and Pandit, Sudhakar M. Development of a
Modi, V ijay (see Chen, Kai) 122, 429 438
Cutting Direction and Sensor Orientation Independent
Moisan, Alphonse L. — (see Poulachon, Gerard) 122, 406-412
Monitoring Technique for End-Milling. 122, 671-677
Mou, J. (see Lee, G.) 122, 331-337
Rozzi, Jay C., Pfefferkorn, Frank E., Shin, Yung C., and Incropera,
Frank P. Experimental Evaluation of the Laser Assisted
Machining of Silicon Nitride Ceramics. 122, 666-670
Narh, K. A. (see Sridhar, L.) 122, 698-705
Neishi, Yutaka, Akiyama, Masayoshi, and Kuroda, Kouichi
Experimentally Based Study on the Effect of Initial Grain Size for
Saka, M. — (see Soyama, H.) 122, 83-89
Characterization of the Grain Coarsening Phenomenon During
Salisbury, Erik — (see Choi, Hoo-Gon R.) 122, 529-535
Hot Rolling of a Medium Carbon Steel. 122, 109-116
Sarma, R. Flat-Ended Tool Swept Sections for Five-Axis NC
Ni, Jun — (see Gong, Chunhe) 122, 174-181
Machining of Sculptured Surfaces. 122, 158-165
(see Li, Wei) 122, 511-512
Sarma, Radha, and Rao, Aarthi Discretizors and Interpolators for
Nielsen, K. B. — (see Zhang, S. H.) 122, 235-243
Five-Axis CNC Machines. 122, 191-197
Niemi, Esko — Machining Cost Optimization Involving Shift and
Schimmel, Roy J., Manjunathaiah, Jairam, and Endres, William J.
Overtime Work. 122, 790-794
— Edge Radius Variability and Force Measurement
Considerations. 122, 590—593(TB)
Sebaaly, M. F. — (see Fujimoto, H.) 122, 198-205
Oh, Y. K. (see Wojnowski, D.) 122, 310-315 Sedlak, B. M. — (see Sridhar, L.) 122, 698-705
Oloyede, A (see Groombridge, P.) 122, 253-261 Senkara, Jacek — (see Zhang, Hongyan) 122, 501-510
Olson, W. W. (see Zheng, Y.) 122, 377-383
Shen, Y. — (see Lee, G.) 122, 331-337
Orady, Elsayed, Li, Songnian, and Chen, Yubao — Evaluation of Shen, Yin-Lin (see Lee, a D.) 122, 706-716
Minimum Zone Straightness by a Nonlinear Optimization
Shi, J. (see Rong, Q.) 122, 773-780
Method. 122, 795—797(TB) Shi, Jianjun (see Jin, Psa 122, 360-369
Orme, Melissa, and Smith, Robert F. Enhanced Aluminum Shin, Yung C. (see Rozzi, Jay C.) 122, 666-670
Properties by Means of Precise Droplet Deposition 122, 484-493 Shiraishi, M., Sugano, S., and Aoshima, S. High Accuracy
Otto, Kevin N. (see Frey, Daniel D.) 122, 513-519 Positioning in SCARA-Type Robot by Sensor-based Decoupling
Ozdoganlar, O. Burak, and Endres, William J. — An Analytical
Control. 122, 166-173
Representation of Chip Area for Corner-Radiused Tools
Shirase, K. — (see Yan, X.) 122, 556-561
Under Both Depth-of-Cut and Feed Variations. 122, 660-665
Shmagin, Dmitry L. — (see Ramasubramanian, M. K.) 122, 576-581
Shulkin, L. B., Mendelsohn, D. A., Kinzel, G. L., and Altan,
T. — A Useful Solution for oo Contact Pressure Between a
Pandit, Sudhakar M. (see Roth, John T.) 122, 671-677 Plate and Foundation. 122, 781-
Park, Changbeom (see Kim, Jinwook) 122, 753 os Siores, E. — (see Groombridge, P.) - 253-261
800 / Vol. 122, NOVEMBER 2000 Transactions of the ASME
Skerlos, Steven J., Rajagopalan, N., DeVor, Richard E., Kapoor, , and Longtin, Randy S. Fixturing of Compliant Parts Using
Shiv G., and Angspatt, V. Don Ingredient-Wise Study of a Matrix of Reconfigurable Pins. 122, 766-772
Flux Characteristics in the Ceramic Membrane Filtration , and Raju, Vinay Simplifying the Development and Usage
of Uncontaminated Synthetic Metalworking Fluids, Part | of Fixtures for Sheet Metal and Composite Aircraft Parts
Experimental Investigation of Flux Decline. 122, 739-745 122, 370—373(TB)
, Rajagopalan, N., DeVor, Richard E., Kapoor, Shiv G., and Wang, K (see Chandra. A.) 122. 452-462
Angspatt, V. Don Ingredient-Wise Study of Flux Wang, Ming-En, Chen, Lin-Lin, and Woo, Tony C. — Swept Surface
Characteristics in the Ceramic Membrane Filtration of
Synthesis With Visibility. 122, 536-542
Uncontaminated Synthetic Metalworking Fluids, Part 2: Analysis of
Wang, Z. R. — (see Zhang, S. H.) 122, 235-243
Underlying Mechanisms. 122, 746-752
Watkins, Thomas R. — (see Thiele, Jeffrey D.) 122, 642-649
Smith, Kevin B., and Zheng, Yuan F. Point Laser Triangulation
Weir, D. J., Milroy, M. J., Bradley, C., and Vickers, G. W.
Probe Calibration for Coordinate Metrology. 122, 582—586(TB)
Smith, Robert F. see Orme, Melissa) 122, 484-493 Wrap-around B-spline Surface Fitting to Digitized Data
Soyama, H., Park, J. D., and Saka, M. Use of Cavitating Jet for With Applications to Reverse Engineering. 122, 323-330
Introducing Compressive Residual Stress. 122, 83-89 Whitenton, E. P. — (see Hwang, T. W.) 122, 32, -41
Sprague, Jeffrey A., Eleftheriou, Evangelos C., and Bates, Charles Wojnowski, D., Oh, Y. K., and Indacochea, J. E. Metallurgical
E. Non-Destructive Machinability Characterization of Assessment of the Softened HAZ Region During Multipass
Materials Through a Correlation With Rate of Strain Sensitivity Welding. 122, 310-315
122, 691-697 Woo, Tony C. — (see Wang, Ming-En) 122, 536-542
Sridhar, L., Sedlak, B. M., and Narh, K. A. Parametric Study of Wood, Kristin L. (see Tumer, Irem Y.) 122, 273-279
Heat Transfer in Injection Molding—Effect of Thermal Contact Wright, Paul K. — (see Sundararajan, V.) 122, 280-290
Resistance. 122, 698-705 Wysocki, Joseph A. — (see Frey, Daniel D.) 122, 513-519
Subhas, B. K., Bhat, Ramaraja, Ramachandra, K., and Balakrishna,
H. K. Simultaneous Optimization of Machining Parameters for
Dimensional Instability Control in Aero Gas Turbine
Components Made of Inconel 718 Alloy. 122, 586-590(TB) Yan, X., Shirase, K., Hirao, M., and Yasui, T. — Evaluation and
Subhash, G. — (see Chandra, A.) 122, 452-462 Improvement of Productivity in High-Speed NC Machining
Sugano, S. — (see Shiraishi, M.) 122, 166-173 122, 556-56!
Sundararajan, V., and Wright, Paul K. Identification of Multiple Yang, Tai-Hung, and Jackman, John Form Error Estimation Using
Feature Representations by Volume Decomposition for 2.5- Spatial Statistics. 122, 262 979
Dimensional Components. 122, 280-290 Yang, Yue-Tzu — (see Hsu, Pao-Tung) 122, 6—82
Sutherland, J. W. — (see Zheng, Y.) 122, 377-383 Yao, Y. Lawrence — (see Chen, Kai) 122, 429-438
(see Li, Wenchuan) 122, 445-451
Yasui, T. — (see Yan, X.) 122, 556-561
Terasaki, Toshio (see Chen, Jun) 122, 304-309 Yip-Hoi, Derek, and Dutta, Debasish Finding Minimum Cost Tool
Thiele, Jeffrey D., Melkote, Shreyes N., Peascoe, Roberta A., and Grouping Schemes on Machining Systems. 122, 543-548
Watkins, Thomas R. Effect of Cutting-Edge Geometry and Yuan, Jingxia — (see Gong, Chunhe) 122, 174-181
Workpiece Hardness on Surface Residual Stresses in Finish Hard
Turning of AISI 52100 Steel. 122, 642-649
Tsai, Fuu-Ren, and Kannatey-Asibu, Elijah, Jr. Modeling of Zeng, Wenjun — (see Lee, James D.) 122, 706-716
Conduction Mode Laser Welding Process For Feedback Zhang, Bi, and Peng, Xianghe — Grinding Damage Prediction for
Cantal, BES, 400-428 Ceramics via CDM Model. 122, 51-58
Tumer, Irem Y., Wood, Kristin L., and Busch-Vishniac, Ilene J.
. Zhang, Guangjun, and Ma, Liqun Modeling and Calibration of
\ Mathematical Transform to Analyze Part Surface Quality
in Manufacturing. 122, 273-279 Grid Structured Light Based 3-D Vision Inspection
122, 734-738
Zhang, Hongyan, Hu, S. Jack, Senkara, Jacek, and Cheng, Shaowei
4 Statistical Analysis of Expulsion Limits in Resistance Spot
Ulsoy, A. G. — (see Hsu, C.-W.) 122, 717-724 Welding. 122, 501-510
Ume, I. Charles — (see Graham, G. M.) 122, 70-75 Zhang, S. H., Danckert, J., Wang, Z. R., and Nielsen, K. B.
Numerical Simulation of Plastic Deformation of Pressurized Oblate
Spheroid-Inscribed Single-Curvature Shells. 122, 235-243
Vickers, G. W. — (see Chan, V. H.) 122, 725-733 Zheng, Y., Li, H., Olson, W. W., and Sutherland, J. W. — Evaluating
(see Weir, D. J.) 122, 323-330 Cutting Fluid Effects on Cylinder Boring Surface Errors by Inverse
Heat Transfer and Finite Element Methods. 122, 377-383
Zheng, Yuan F. — (see Smith, Kevin B.) 122, 582—586(TB)
Walezyk, Daniel F., and Im, Yong-Tai — A Hydraulically-Actuated Zhu, L. — (see Ramakrishnan, B.) 122, 124-131
Reconfigurable Tool for Flexible Fabrication: Implementation Zhuang, Hangi, Liu, Lixin, and Masory, Oren Autonomous
and Control. 122, 562-568 Calibration of Hexapod Machine Tools. 122, 140-148
Journal of Manufacturing Science and Engineering NOVEMBER 2000, Vol. 122 / 801