Table Of Content

Journal of Hazardous Materials Journal of Hazardous Materials 106 (2004) 179-180 www.elsevier.com/locate/jhazmat Contents Volume 106 Part A: Risk Assessment and Management Chemiluminescence detection systems for the analysis of explosives A.M. Jiménez and M.J. Navas (Seville, Spain) Hydrocode simulations of air and water shocks for facility vulnerability assessments J. Keith Clutter (San Antonio, TX, USA) and M. Stahl (Helotes, TX, USA) Part B: Environmental Technologies Preparation of polyelectrolytes for wastewater treatment M.T. Radoiu, D.I. Martin, I. Calinescu and H. Iovu (Bucharest, Romania) Prospects for cleaning ash in the acidic effluent from bioleaching of sulfidic concentrates M. Paul, A. Sandstrém and J. Paul (Lulea, Sweden) A kinetic model of aqueous-phase alkali hydrolysis of 2,4,6-trinitrotoluene R. Bajpai, D. Parekh (Columbia, MO, USA), S. Herrmann, M. Popovic (Berlin, Germany), J. Paca (Prague, Czech Republic) and M. Qasim (Vicksburg, MS, USA) Adsorption characteristics of Fe(III) and Fe(IIJ)—NTA complex on granular activated carbon D.S. Kim (Seoul, South Korea) Groundwater quality in some villages of Haryana, India: focus on fluoride and fluorosis Meenakshi, V.K. Garg, Kavita, Renuka and A. Malik (Haryana, India) Book reviews Instructions to Authors Publisher's note Part A: Risk Assessment and Management Hazardous properties of paint residues from the furniture industry K. Vaajasaari, M. Kulovaara (Tampere, Finland), A. Joutti, E. Schultz (Helsinki, Finland) and K. Soljamo (Lahti, Finland). Part B: Environmental Technologies Advanced sludge treatment affects extracellular polymeric substances to improve activated sludge dewatering E. Neyens (Aartselaar, Belgium), J. Baeyens, R. Dewil (Antwerp, Belgium) and B. De heyder (Aartselaar, Belgium) Poly(ethylene glycol dimethacrylate-n-vinyl imidazole) beads for heavy metal removal A. Kara (Bursa, Turkey), L. Uzun (Ankara, Turkey), N. Besirli (Bursa, Turkey) and A. Denizli (Ankara, Turkey) .. . . Removal of phosphate from aqueous solutions by electro-coagulation N. Bektas, H. Akbulut, H. Inan and A. Dimoglo (Gebze/Kocaeli, Turkey). . Technological parameters of the ammonolysis of waste 1,2-dichloropropane M. Bartkowiak, G. Lewandowski and E. Milchert (Szczecin, Poland) Degradation of aldrin in adsorbed system using advanced oxidation processes: comparison of the treatment methods E. Kusvuran and O. Erbatur (Adana, Turkey) Electrodialytic removal of cadmium from wastewater sludge M.R. Jakobsen, J. Fritt-Rasmussen, S. Nielsen and L.M. Ottosen (Lyngby, Denmark) Effect of metal spiking on different chemical pools and chemically extractable fractions of heavy metals in sewage sludge G. Kandpal, B. Ram, P.C. Srivastava and S.K. Singh (Pantnagar, India) Effect of experimental variables on the inertization of galvanic sludges in clay-based ceramics J.M. Magalhaes, J.E. Silva, FP. Castro (Guimaraes, Portugal) and J.A. Labrincha (Aveiro, Portugal) Examination of cadmium sorption characteristics for a boreal soil near Fairbanks, Alaska V. Autier and D. White (Fairbanks, AK, USA) Acid deposition and critical load analysis in Agra, India A. Bhattacharya, R. Mudgal and A. Taneja (Agra, India) Recovery of isopropyl alcohol from waste solvent of a semiconductor plant S.H. Lin and C.S. Wang (Chungli, Taiwan) 10.1016/S0304-3894(04)0001 1-1 180 Contents Volume 106 Role of the mixing conditions and composition of galvanic sludges on the inertization process in clay-based ceramics J.M. Magalhaes, J.E. Silva, FP. Castro (Guimaraes, Portugal) and J.A. Labrincha (Aveiro, Portugal) Book reviews