Journal of Engineering Materials and Technology 2001: Vol 123 Index

5 Pages·2001·1.3 MB·English

Journal of
Engineering Materials
and Technology
A/l authors of papers published in this volume are listed alphabetically. Full titles are ine uded in each first
author’s entry. Letters in parentheses follow some of the page numbers TB indicates Tee nj ical ipB rie f D indicates
Discussion, E indicates Errata and BR indicates Book Revies
Agrawal, Hari N. (see Khanna, Sanjeev K.) 123, 132-138 Chow, C. L., Yang, X. J., and Chu, Edmund Viscoplastic
Argon, A. S. Mechanics and Physics of Brittle to Ductile Transitions Constitutive Modeling of Anisotropic Damage Under Nonproportional
in Fracture 123, 1-11 Loading. 123, 403 408
Arnold, S. M., Saleeb, A. F., and Castelli, M. G. 4 General Time Chu, Edmund — (see Chow, C. | ) 123, 403 408
Dependent Constitutive Model: Part I Application to a Chung, S. H., Park, H., Jeon, K. D., Kim, K. T., and Hwang, S. M.
Titanium Alloy. 123, 65—73 An Optimal Container Design for Metal Powder Under Hot
(see Saleeb, A. F.) 123, 51—64 Isostatic Pressing 123, 234 239
Atkins, A. G. (see Ganser, H P.) 123, 94-99 Cocks, A. C. F. (see Sinka, I. ¢ ) 123, 176-183
Barlow, Chris, Kumar, Vipin, Flinn, Brian, Bordia, Rajendra K., Demoulin, G. (see Le Guen J.) 123, 36-44
and Weller, John Impact Strength of High Density Solid Dougal, Roger A. (see Liu Shengyi) 123, 210 215
State Microcellular Polycarbonate Foams 123, 229-233 Duan, Z. P. (see Zhou, Y. ¢ ) 123, 251 260
Berveiller, M. (see Krummeich, R.) 123, 216 220
Bohn, M. L., Xu, S. G., Weinmann, K. J., Chen, C. C., and
Chandra, A. Improving Formability in Sheet Metal Stamping With
Elbadan, A. M.
Active Drawbead Technology 123, 504 510
Bone, G. M. (see Nye, T. J.) 123, 511 516
Bordia, Rajendra K. see Barlow, Chris) 123, 229-233
Borjesson, Lars, and Lindgren, Lars-Erik Simulation of Multipass Fellers, C. (see Stenberg, N 123, 184 190
Welding With Simultaneous Computation of Material Properties Fischer, F. D. (see Ganser, H.-P.) 123, 94—99
123, 106-111 Flinn, Brian (see Barlow Chris) 123, 229-233
Boyce, Mary C. (see Socrate Simona) 123, 489-495 Frazier, W. G. (see Prasad Y. V. R. K.) 123, 355 360
Brunet, M., Morestin, F., and Godereaux, S. Nonlinear Kinematic
Hardening Identification for Anisotropic Sheet Metals With
Bending-Unbending Tests 123, 378 383
Ganser, H.-P., Atkins, A. G., Kolednik, O., Fischer, F. D., and
Richard, O. Upsetting of Cylinders A Comparison of
Two Different Damage Indicators 123, 94 99
Cabrera, E. S. Puchi \ Constitutive Description of Aluminum-| Garcia-Granada, A. A., Lacarac, V. D., Holdway, P., Smith, D. J.,
Magnesium Alloy Deformed Under Hot-Working Conditions and Pavier, M. J. Creep Relaxation of Residual Stresses
123, 30! 308 Around Cold Expanded Holes. 123, 125-131
Cao, Jian, and Xia, Z. Cedric Foreword. 121323,, 377 Gedikli, Hasan (see Sofuoglu, Hasan) 123, 338 348
(see Song Nan) 123, 456 161 Giacomin, A. Jeffrey (see Hade, Aaron J.) 123, 100 105
(see Wang Xi) 123, 430-435 Gibson, Ronald F., Chen, Yu, and Zhao, Hui Improvement of
Castelli, M. G. (see Arnold, S. M.) 123, 65-73 Vibration Damping Capacity and Fracture Toughness in
Castro-Farinas, Gonzalo (see Puchi-Cabrera, Eli S.) 123, 155 161 Composite Laminates by the Use of Polymeric Interleaves
Chan, Kwai S. Constitutive Relations for Inelastic Deformation 123, 309-314
and Damage Accumulation in Hard Alpha Titanium Godereaux, S. (see Brunet, M.) 123, 378-383
123, 281 286 Guduru, P. R. (see Venkert, A.) 123, 261-267
Chandra, A. (see Bohn, M. L.) 123, 504 510
Chandra, Abhijit — (see Zhu, Xinhai) 123, 329-333
Chen, C. C. (see Bohn, M. L.) 123, 504—510
Chen, Jiun-Shyan — (see Yoon, Sangpil) 123, 462-467 Hade, Aaron J., and Giacomin, A. Jeffrey Wire Coating Under
Chen, Kuo-Kuang, and Sa, Chung-Yeh Effects of Some Modeling Vacuum. 123, 100-105
Parameters of Finite Element Models of Binder Forming Hardt, D. E., Norfleet, W. A., Valentin, V. M., and Parris, A. In
123, 447 455 Process Control of Strain in a Stretch Forming Process
Chen, Wei, and Lynch, Christopher S. Multiaxial Constitutive 123, 496 503
Behavior of Ferroelectric Materials. 123, 169-175 Hashida, T. (see Zhou, Y. C.) 123, 251 260
Chen, Yu (see Gibson Ronald F.) 123, 309 314 He, Canlong (see Khanna, Sanjeev K.) 123, 132 138
Chen, Zhongchun (see Takeda Takenobu) 123, 268-273 He, Jianmei, Chiang, Martin Y. M., and Hunston, Donald L.
Cheng, X., Sastry, A. M., and Layton, B. E. Transport in Stochastic Assessment of Sandwich Beam in Three-Point Bending
Fibrous Networks 123, 12-19 for Measuring Adhesive Shear Modulus. 123, 322-328
Chiang, Martin Y. M. (see He, Jianmei) 123, 322-328 Hematian, J., and Wild. P. M. The Effects of Tooling Imperfections
Chien, W. Y., Pan, J., and Tang, S. C. Modified Anisotropic Gurson on the Initiation of Wrinkling in Finite Element Modeling of a
Yield Criterion for Porous Ductile Sheet Metals 123, 409-416 Deep Drawing Process. 123, 442-446
530 / Vol. 123, OCTOBER 2001 Transactions of the ASME
Journal of
Engineering Materials
and Technology
A/l authors of papers published in this volume are listed alphabetically. Full titles are ine uded in each first
author’s entry. Letters in parentheses follow some of the page numbers TB indicates Tee nj ical ipB rie f D indicates
Discussion, E indicates Errata and BR indicates Book Revies
Agrawal, Hari N. (see Khanna, Sanjeev K.) 123, 132-138 Chow, C. L., Yang, X. J., and Chu, Edmund Viscoplastic
Argon, A. S. Mechanics and Physics of Brittle to Ductile Transitions Constitutive Modeling of Anisotropic Damage Under Nonproportional
in Fracture 123, 1-11 Loading. 123, 403 408
Arnold, S. M., Saleeb, A. F., and Castelli, M. G. 4 General Time Chu, Edmund — (see Chow, C. | ) 123, 403 408
Dependent Constitutive Model: Part I Application to a Chung, S. H., Park, H., Jeon, K. D., Kim, K. T., and Hwang, S. M.
Titanium Alloy. 123, 65—73 An Optimal Container Design for Metal Powder Under Hot
(see Saleeb, A. F.) 123, 51—64 Isostatic Pressing 123, 234 239
Atkins, A. G. (see Ganser, H P.) 123, 94-99 Cocks, A. C. F. (see Sinka, I. ¢ ) 123, 176-183
Barlow, Chris, Kumar, Vipin, Flinn, Brian, Bordia, Rajendra K., Demoulin, G. (see Le Guen J.) 123, 36-44
and Weller, John Impact Strength of High Density Solid Dougal, Roger A. (see Liu Shengyi) 123, 210 215
State Microcellular Polycarbonate Foams 123, 229-233 Duan, Z. P. (see Zhou, Y. ¢ ) 123, 251 260
Berveiller, M. (see Krummeich, R.) 123, 216 220
Bohn, M. L., Xu, S. G., Weinmann, K. J., Chen, C. C., and
Chandra, A. Improving Formability in Sheet Metal Stamping With
Elbadan, A. M.
Active Drawbead Technology 123, 504 510
Bone, G. M. (see Nye, T. J.) 123, 511 516
Bordia, Rajendra K. see Barlow, Chris) 123, 229-233
Borjesson, Lars, and Lindgren, Lars-Erik Simulation of Multipass Fellers, C. (see Stenberg, N 123, 184 190
Welding With Simultaneous Computation of Material Properties Fischer, F. D. (see Ganser, H.-P.) 123, 94—99
123, 106-111 Flinn, Brian (see Barlow Chris) 123, 229-233
Boyce, Mary C. (see Socrate Simona) 123, 489-495 Frazier, W. G. (see Prasad Y. V. R. K.) 123, 355 360
Brunet, M., Morestin, F., and Godereaux, S. Nonlinear Kinematic
Hardening Identification for Anisotropic Sheet Metals With
Bending-Unbending Tests 123, 378 383
Ganser, H.-P., Atkins, A. G., Kolednik, O., Fischer, F. D., and
Richard, O. Upsetting of Cylinders A Comparison of
Two Different Damage Indicators 123, 94 99
Cabrera, E. S. Puchi \ Constitutive Description of Aluminum-| Garcia-Granada, A. A., Lacarac, V. D., Holdway, P., Smith, D. J.,
Magnesium Alloy Deformed Under Hot-Working Conditions and Pavier, M. J. Creep Relaxation of Residual Stresses
123, 30! 308 Around Cold Expanded Holes. 123, 125-131
Cao, Jian, and Xia, Z. Cedric Foreword. 121323,, 377 Gedikli, Hasan (see Sofuoglu, Hasan) 123, 338 348
(see Song Nan) 123, 456 161 Giacomin, A. Jeffrey (see Hade, Aaron J.) 123, 100 105
(see Wang Xi) 123, 430-435 Gibson, Ronald F., Chen, Yu, and Zhao, Hui Improvement of
Castelli, M. G. (see Arnold, S. M.) 123, 65-73 Vibration Damping Capacity and Fracture Toughness in
Castro-Farinas, Gonzalo (see Puchi-Cabrera, Eli S.) 123, 155 161 Composite Laminates by the Use of Polymeric Interleaves
Chan, Kwai S. Constitutive Relations for Inelastic Deformation 123, 309-314
and Damage Accumulation in Hard Alpha Titanium Godereaux, S. (see Brunet, M.) 123, 378-383
123, 281 286 Guduru, P. R. (see Venkert, A.) 123, 261-267
Chandra, A. (see Bohn, M. L.) 123, 504 510
Chandra, Abhijit — (see Zhu, Xinhai) 123, 329-333
Chen, C. C. (see Bohn, M. L.) 123, 504—510
Chen, Jiun-Shyan — (see Yoon, Sangpil) 123, 462-467 Hade, Aaron J., and Giacomin, A. Jeffrey Wire Coating Under
Chen, Kuo-Kuang, and Sa, Chung-Yeh Effects of Some Modeling Vacuum. 123, 100-105
Parameters of Finite Element Models of Binder Forming Hardt, D. E., Norfleet, W. A., Valentin, V. M., and Parris, A. In
123, 447 455 Process Control of Strain in a Stretch Forming Process
Chen, Wei, and Lynch, Christopher S. Multiaxial Constitutive 123, 496 503
Behavior of Ferroelectric Materials. 123, 169-175 Hashida, T. (see Zhou, Y. C.) 123, 251 260
Chen, Yu (see Gibson Ronald F.) 123, 309 314 He, Canlong (see Khanna, Sanjeev K.) 123, 132 138
Chen, Zhongchun (see Takeda Takenobu) 123, 268-273 He, Jianmei, Chiang, Martin Y. M., and Hunston, Donald L.
Cheng, X., Sastry, A. M., and Layton, B. E. Transport in Stochastic Assessment of Sandwich Beam in Three-Point Bending
Fibrous Networks 123, 12-19 for Measuring Adhesive Shear Modulus. 123, 322-328
Chiang, Martin Y. M. (see He, Jianmei) 123, 322-328 Hematian, J., and Wild. P. M. The Effects of Tooling Imperfections
Chien, W. Y., Pan, J., and Tang, S. C. Modified Anisotropic Gurson on the Initiation of Wrinkling in Finite Element Modeling of a
Yield Criterion for Porous Ductile Sheet Metals 123, 409-416 Deep Drawing Process. 123, 442-446
530 / Vol. 123, OCTOBER 2001 Transactions of the ASME
Ho, Kwangsoo, and Krempl, Erhard The Modeling of Unusual Li, Xu-Dong — Computer Identification of Structural Weaknesses in
Rate Sensitivities Inside and Outside the Dynamic Strain Aging Locally Anisotropic Polycrystalline Materials. 123, 361—370
Regime. 123, 28-35 Liew, K. M. — (see Li, G. Y.) 123, 119-124
Holdway, P. — (see Garcia-Granada, A. A.) 123, 125-131 Lindgren, Lars-Erik — (see Borjesson, Lars) 123, 106-111
Horiguchi, K. — (see Shindo, Y.) 123, 45—50 Lippmann, H. — (see Thalmair, M.) 123, 524-529
(see Shindo, Y.) 123, 112-118 Liu, S.-D. — (see Huang, H.-M.) 123, 384-390
(see Shindo, Y.) 123, 191-197 Liu, Shengyi, Dougal, Roger A., and Lyons, Jed S. Heat Treatment
(see Shindo, Y.) 123, 293-300 of Metal Surfaces by a Conformal Electron Beam. 123, 210-215
Hu, S. Jack — (see Zhang, Guohua) 123, 436-441 Liu, Wing Kam — (see Song, Nan) 123, 456-461
Huang, H.-M., Liu, S.-D., and Jiang, S. Stress and Strain Histories Long, S. G. — (see Zhou, Y. C.) 123, 251-260
of Multiple Bending-Unbending Springback Process. 123, 384—390 Lynch, Christopher S. — (see Chen, Wei) 123, 169-175
Huh, Hoon, and Kim, Se-Ho Optimum Process Design in Sheet- Lyons, Jed S. — (see Liu, Shengyi) 123, 210-215
Metal Forming With Finite Element Analysis. 123, 476-481
Hunston, Donald L. — (see He, Jianmei) 123, 322—328
Hwang, S. M. — (see Chung, S. H.) 123, 234-239 Mall, S. — (see Iyer, K.) 123, 85-93
Mano, Y. (see Shindo, Y.) 123, 45—50
Medeiros, S. C. (see Prasad, Y. V. R. K.) 123, 355-360
Iyer, K., and Mall, S. Analyses of Contact Pressure and Stress Morestin, F. — (see Brunet, M.) 123, 378-383
Amplitude Effects on Fretting Fatigue Life. 123, 85—93 Mroz, Z. (see Kucharski, S.) 123, 245-250
Jeon, K. D. (see Chung, S. H.) 123, 234-239 Norfleet, W. A. — (see Hardt, D. E.) 123, 496-503
Jezequel, L. (see Le Guen, J.) 123, 36-44 Nye, T. J. Stamping Blank Optimal Layout and Coil Slitting Widths
Jiang, S. (see Huang, H.-M.) 123, 384-390 for Single and Multiple Blanks. 123, 482—488
Jiang, Yanyao An Experimental Study of Inhomogeneous Cyclic , Elbadan, A. M., and Bone, G. M. Real-Time Process
Plastic Deformation 123, 274-280 Characterization of Open Die Forging for Adaptive Control
123, 511-516
Joshi, S. S., Ramakrishnan, N., and Ramakrishnan, P.
Micro-Structural Analysis of Chip Formation During Orthogonal
Machining of Al/SiCp Composites. 123, 315-321
Oka, M. (see Shindo, Y.) 123, 293-300
Ostlund, S. (see Stenberg, N.) 123, 184-190
Keiser, James R. (see Sarma, Gorti B.) 123, 349-354
Khanna, Sanjeev K., He, Canlong, and Agrawal, Hari N. Residual
Stress Measurement in Spot Welds and the Effect of Fatigue Pan, J. (see Chien, W. Y.) 123, 409-416
Loading on Redistribution of Stresses Using High Sensitivity Moire Park, H. (see Chung, S. H.) 123, 234-239
Interferometry. 123, 132-138 Parris, A. — (see Hardt, D. E.) 123, 496-503
Kim, H. G., Lee, H. M., and Kim, K. T. Near-Net-Shape Forming Patankar, S. N., and Tan, M. J. — Influence of Alpha Casing on
of Ceramic Powder Under Cold Combination Pressing and Superplastic Deformation of Ti-6Al-4V. 123, 144-—147(TB)
Pressureless Sintering. 123, 221-228 Pavier, M. J. — (see Garcia-Granada, A. A.) 123, 125-131
Kim, K. T. — (see Chung, S. H.) 123, 234-239 Pennetier, Olivier — (see Woznica, Krzysztof) 123, 203-209
(see Kim, H. G.) 123, 221-228 Prasad, Y. V. R. K., Seshacharyulu, T., Medeiros, S. C., and Frazier,
Kim, Se-Ho — (see Huh, Hoon) 123, 476-481 W. G. A Study of Beta Processing of Ti-6AI-4V Is it Trivial?
Kolednik, O. — (see Ganser, H.-P.) 123, 94—99 123, 355-360
Krempl, Erhard (see Ho, Kwangsoo) 123, 28-35 Prime, M. B. — Cross-Sectional Mapping of Residual Stresses by
Krummeich, R., Sabar, H., and Berveiller, M. — Micromechanical Measuring the Surface Contour After a Cut. 123, 162-168
Puchi-Cabrera, E. S. Modeling Cold-Rolling Processes of
Approach of Lamellar Nano-Composites: Influence of the
Commercial Twin Roll Cast Aluminum Alloys. 123, 149-154
Microstructure on the Yield Strength. 123, 216-220
Puchi-Cabrera, Eli S., Villalobos-Gutierrez, Crisanto, and Castro-
Kucharski, S., and Mroz, Z. Identification of Hardening Parameters
Farinas, Gonzalo On the Mechanical Threshold Stress of
of Metals From Spherical Indentation Tests. 123, 245-250
Aluminum: Effect of the Alloying Content. 123, 155-161
Kudo, H. — (see Shindo, Y.) 123, 191-197
Kumar, Ashok V. — (see Yang, Chulho) 123, 20-27
Kumar, Vipin — (see Barlow, Chris) 123, 229-233
Qian, Dong — (see Song, Nan) 123, 456-461
Lacarac, V. D. (see Garcia-~Granada, A. A.) 123, 125-131
Layton, B. E. (see Cheng, X.) 123, 12-19 Ramakrishnan, N. (see Joshi, S. S.) 123, 315-321
Lee. H. M. — (see Kim, H. G.) 123, 221-228 Ramakrishnan, P. (see Joshi, S. S.) 123, 315-321
Lee, J. K. — (see Zhao, K. M.) 123, 287-292 Rasty, Jahan — (see Sofuoglu, Hasan) 123, 338-348
(see Zhao, K. M.) 123, 391-397 Ravichandran, G. (see Venkert, A.) 123, 261-267
Lee, M. H. (see Tseng, A. A.) 123, 74-84 Reigl, M. — (see Thalmair, M.) 123, 524-529
Le Guen, J., Thouverez, F., Demoulin, G., and Jezequel, L. Time Ren, Feng — (see Tang, Sing C.) 123, 398-402
Model of Rubber Deformation. 123, 36—44 Renard, Jerome — (see Woznica, Krzysztof) 123, 203-209
Li, G. Y., Tan, M. J., Liew, K. M., and Zhong, Z. H. Sheet Richard, O. — (see Ganser, H.-P.) 123, 94-99
Forming Analysis Based on Improved Contact Searching Rose, Ian — (see Zarrabi, Khosrow) 123, 334-337
Algorithm and Simple Approach for Contact Force Evaluation
123, 119-124
Li, Shaofan — (see Song, Nan) 123, 456-461 Sa, Chung-Yeh — (see Chen, Kuo-Kuang) 123, 447-455
Journal of Engineering Materials and Technology OCTOBER 2001, Vol. 123 / 531
Sabar, H. — (see Krummeich, R.) 123, 216-220 Tong, Jie Three Stages of Fatigue Crack Growth in GFRP
Saleeb, A. F., and Arnold, S. M. 4 General Time Dependent Composite Laminates. 123, 139-143
Constitutive Model: Part I Theoretical Developments Tseng, A. A., Lee, M. H., and Zhao, B. Design and Operation of a
123, 51-64 Droplet Deposition System for Freeform Fabrication of Metal
(see Arnold, S. M.) 123, 65-73 Parts. 123, 74-84
Sarma, Gorti B., Keiser, James R., Wang, Xun-Li, and Swindeman, Tweed, J. H. (see Sinka, I. C.) 123, 176-183
Robert W. Modeling Studies to Predict Stresses in Composite
Floor Tubes of Black Liquor Recovery Boilers. 123, 349-354
Sastry, A. M. -—— (see Cheng, X.) 123, 12-19
Seif, M. A., and Shahjahan, M. Mixed-Mode Failure of Grar ‘tite Ulmer, Jochen — (see Siegert, Klaus) 123, 5
Epoxy Composites. 123, 371-376
Seshacharyulu, T. — (see Prasad, Y. V. R. K.) 123, 355-360
Shahjahan, M. (see Seif. M. A.) 123, 371-376 Valentin, V. M. (see Hardt, D. E.) 123, 496-503
Shim, H. B., and Son, K. C. Optimal blank design for the drawings Venkert, A., Guduru, P. R., and Ravichandran, G. Effect of
of arbitrary shapes by the sensitivity method. 123, 468-475 Loading Rate on Fracture Morphology in a High Strength
Shimura, Yasumi (see Tendo Masayuki) 123, 198-202 Ductile Steel. 123, 261-267
Shindo, Y., Horiguchi, K., Wang, R., and Kudo, H. Double Villalobos-Gutierrez, Crisanto — (see Puchi-Cabrera, Eli S.)
Cantilever Beam Measurement and Finite Element Analysis 123, 155-161
of Cryogenic Mode I Interlaminar Fracture Toughness of Glass-Cloth/
Epoxy Laminates 123, 191-197
, Mano, Y., Horiguchi, K., and Sugo, T. Cryogenic Fracture
Toughness Determination of a Structural Alloy Weldment by Wang, Hui-Ping (see Yoon, Sangpil) 123, 462—467
Notch Tensile Measurement and Finite Element Analysis. 123, 45 Wang, R. (see Shindo, Y.) 123, 112-118
, Oka, M., and Horiguchi, K. Analysis and Testing (see Shindo, Y.) 123, 191-197
of Indentation Fracture Behavior of Piezoelectric Ceramics Under an Wang, Xi, and Cao, Jian Wrinkling Limit in Tube Bending
Electric Field. 123, 293-300 123, 430—435
, Wang, R., and Horiguchi, K. Analytical and Experimental Wang, Xun-Li (see Sarma, Gorti B.) 123, 349-354
Studies of Short-Beam Interlaminar Shear Strength of G-10CR Weinmann, K. J. (see Bohn, M. L.) 123, 504-510
Glass-Cloth/Epoxy Laminates at Cryogenic Temperatures Weinmann, Klaus (see Zhu, Xinhai) 123, 329-333
123, 112-118 Weller, John (see Barlow, Chris) 123, 229-2 33
Siegert, Klaus, and Ulmer, Jochen Superimposing Ultrasonic Waves Wild, P. M. — (see Hematian, J.) 123, 442-446
on the Dies in Tube and Wire Drawing. 123, 517-523 Woznica, Krzysztof, Pennetier, Olivier, and Renard, Jerome
Sinka, I. C., Cocks, A. C. F., and Tweed, J. H. — Constitutive Data Experiments and Numerical Simulations on Thin Metallic Plates
for Powder Compaction Modeling. 123, 176-183 Subjected to an Explosion. 123, 203-209
Smith, D. J. (see Garcia~Granada, A. A.) 123, 125-131 Wu, Cheng-Tang — (see Yoon, Sangpil) 123, 462—467
Socrate, Simona, and Boyce, Mary C. \ Finite Element Based Die Wu, Xin — (see Zhang, Guohua) 123, 436-441
Design Algorithm for Sheet-Metal Forming on Reconfigurable
Toots. 123, 489-495
Sofuoglu, Hasan, Gedikli, Hasan, and Rasty, Jahan — Determination
Xia, Z. C. Failure Analysis of Tubular Hydroforming. 123, 423-429
o1f2 3,F ric3t3i8o-n— 34C8o efficient by Employing the Ring Compression Test Xia, Z. Cedric (see Cao, Jian) 123, 23 77
Son, K. C. — (see Shim, H. B.) 123, 468-475 (see Tang, Sing C.) 123, 398-402
Song, Nan, Qian, Dong, Cao, Jian, Liu, Wing Kam, and Li, Shaofan Xu, S. G. — (see Bohn, M. L.) 123, 504-510
Effective Models for Prediction of Springback In Flanging
123, 456-461
Stenberg, N., Fellers, C., and Ostlund, S. Plasticity in the Yamada, Kenji — (see Tendo, Masayuki) 123, 198-202
Thickness Direction of Paperboard Under Combined Shear and Yang, Chulho, and Kumar, Ashok V. Investigation of Strain
Normal Loading. 123, 184-190 Hardening in NiAl Single Crystals Using Three-Dimensional
Stoughton, Thomas B. Stress-Based Forming Limits in Sheet-Metal FEA Models. 123, 20-27
Forming. 123, 417-422 Yang, X. J. — (see Chow, C. L.) 123, 403-408
Sugo, T. (see Shindo, Y.) 123, 45—50
Yoon, Sangpil, Wu, Cheng-Tang, Wang, Hui-Ping, and Chen,
Swindeman, Robert W. — (see Sarma, Gorti B.) 123, 349-354
Jiun-Shyan Efficient Meshfree Formulation for Metal Forming
Simulations. 123, 462—467
Takeda, Takenobu, and Chen, Zhongchun Off-Axis Torsion Tests
on Tubular Specimens of Steel. 123, 268-273
Zarrabi, Khosrow, and Rose, lan Mid-Wall Temperature in an
Tan, M. J. (see Li, G. Y.) 123, 119-124
Eroded Section of an Austenitic Superheater/Reheater Tube
(see Patankar, S. N.) 123, 144—147(TB)
123, 334-337
Tang, S. C. (see Chien, W. Y.) 123, 409-416
Zhang, Guohua, Wu, Xin, and Hu, S. Jack A Study on
Tang, Sing C., Xia, Z. Cedric, and Ren, Feng Application of the
Radial Return Method to Compute Stress Increments From Fundamental Mechanisms of Warp and Recoil in Hemming
Mroz’s Hardening Rule. 123, 398-402 123, 436-441
Tendo, Masayuki, Yamada, Kenji, and Shimura, Yasumi Stress Zhao, B. — (see Tseng, A. A.) 123, 74-84
Relaxation Behavior at High-Tension Bolted Connections of Zhao, Hui (see Gibson, Ronald F.) 123, 309-314
Stainless-Steel Plates. 123, 198—202 Zhao, K. M., and Lee, J. K. Material Properties of Aluminum Alloy
Thalmair, M., Lippmann, H., and Reigl, M. Spatial Free Plastic for Accurate Draw-Bend Simulation 123, 287-292
Forming of Slender Parts Machine Design, Forming Limits, , and Lee, J. K. Generation of Cyclic Stress-Strain Curves for
and Application. 123, 524—529 Sheet Metals. 123, 391 —397
Thouverez, F. (see Le Guen, J.) 123, 36-44 Zhong, Z. H. (see Li, G. Y.) 123, 119-124
532 / Vol. 123, OCTOBER 2001 Transactions of the ASME
Zhou, Y. C., Long, S. G., Duan, Z. P., and Hashida, T. Thermal Zhu, Xinhai, Weinmann, Klaus, and Chandra, Abhijit \ Unified
Damage in Particulate-Reinforced Metal Matrix Composites Bifurcation Analysis of Sheet Metal Forming Limits
123, 251-260 123. 329-333
Journal of Engineering Materials and Technology OCTOBER 2001, Vol. 123 / 533