Journal of Engineering for Gas Turbines and Power 2004: Vol 126 Index

2004·1.6 MB·English

Journal of
Engineering
for Gas Turbines
and Power
All authors of papers published in this volume are listed alphabetically. Full titles are included in each first
author's entry. Letters in parentheses follow some of the page numbers: TB indicates Technical Brief, E indicates
Errata, and D indicates Discussion
Aceves, Salvador M. — (see Martinez-Frias, Joel) 126, 2-8 (see Korakianitis, T.) 126, 482—488
Agarwal, A. K., Bijwe, J., and Das, L. M. — Erratum Redux: “Effect Bozza, Fabio, Cameretti, Maria Cristina, and Tuccillo, Raffaele
of Biodiesel Utilization of Wear of Vital Parts in Compression The Employment of Hydrogenerated Fuels From Natural
Ignition Engine” [ASME J. Eng. Gas Turbines Power, 125, pp Gas Reforming: Gas Turbine and Combustion Analysis. 126, 489
604-611]. 126, 199(E) Bozzo, Riccardo — (see Magistri, Loredana) 126, 516-523
Aidanpaa, Jan Olov — (see Angantyr, Anders) 126, 619-625 Brandt, Harry — (see Martinez-Frias, Joel) 126, 2-8
Akagi, K. — (see Nakane, H.) 126, 342-350 Brandvoll, O., and Bolland, O. Inherent CO, Capture Using
Akita, E. — (see Nakane, H.) 126, 342-350 Chemical Looping Combustion in a Natural Gas Fired Power
Al-Dawood, A. M. — (see Al-Farayedhi, A. A.) 126, 178-191 Cycle. 126, 316-321
Al-Farayedhi, A. A., Al-Dawood, A. M., and Gandhidasan, P. Brennan, Michael J. — (see Bonello, Philip) 126, 855-866
— Experimental Investigation of SI Engine Performance Brewer, D. — (see Verrilli, M. J.) 126, 45—49
Using Oxygenated Fuel. 126, 178-191 Burrows, C. R. (see Keogh, P. S.) 126, 366-372
Andreini, A., and Facchini, B. — Gas Turbines Design and Off-Design
Performance Analysis With Emissions Evaluation. 126, 83-91
Angantyr, Anders, and Aidanpaa, Jan Oloy — A Pareto-Based Genetic
Cameretti, Maria Cristina — (see Bozza, Fabio) 126, 489-497
Algorithm Search Approach to Handle Damped Natural Frequency
Campanari, S., Boncompagni, L., and Macchi, E. Microturbines
Constraints in Turbo Generator Rotor System Design
and Trigeneration: Optimization Strategies and Multiple Engine
126, 619-625
Configuration Effects. 126, 92-101
Annaswamy, A. M. — (see Riley, A. J.) 126, 708-716
Campanari, Stefano, and Macchi, Ennio Technical and Tariff
Arakere, N. K. — High-Temperature Fatigue Properties of Single
Scenarios Effect on Microturbine Trigenerative Applications
Crystal Superalloys in Air and Hydrogen. 126, 590-603
126, 581-589
Aretakis, N., Mathioudakis, K., Kefalakis, M., and Papailiou, K.
Canakci, M., and Reitz, R. D. Effect of Optimization Criteria on
Turbocharger Unstable Operation Diagnosis Using
Direct-Injection Homegeneous Charge Compression Ignition
Vibroacoustic Measurements. 126, 840-847
Gasoline Engine Performance and Emissions Using Fully Automated
Arima, Toshiyuki — (see Kang, Sangkyun) 126, 358-365
Experiments and Microgenetic Algorithms. 126, 167-177
Cao, C., Chew, J. W., Millington, P. R., and Hogg, S. L. Interaction
of Rim Seal and Annulus Flows in an Axial Flow Turbine
Bai, Ou, Nakamura, Masatoshi, Ikegami, Yasuyuki, and Uehara, 126, 786-793
Haruo — A Simulation Model for Hot Spring Thermal Energy Cao, Y. — (see Ling, J.) 126, 680-—683(TB)
Conversion Plant With Working Fluid of Binary Mixtures Capiez-Lernout, E., and Soize, C. Nonparametric Modeling of
126, 445-454 Random Uncertainties for Dynamic Response of Mistuned
Ballal, Dilip R. — /N MEMORIAM: Professor Arthur H. Lefebvre Bladed Disks. 126, 610-618
(1923-2003). 126, 442 Caton, Jerald A., and Xia, Zhiyong The Selective Non-Catalytic
Beer, J. M., Toqan, M. A., Haynes, J. M., and Borio, R. W. Removal (SNCR) of Nitric Oxides From Engine Exhaust
— Development of the Radially Stratified Flame Core Low NO, Streams: Comparison of Three Processes. 126, 234-240
Burner: From Fundamentals to Industrial Applications Cen, K. C. (see Fan, J R.) 126, 672-679
126, 248-253 Chaker, Mustapha, Meher-Homji, Cyrus B., and Mee, Thomas, III
Bell, S. R. — (see Krishnan, S. R.) 126, 665-671 Inlet Fogging of Gas Turbine Engines Part Il: Fog Behavior
Bellucci, V., Flohr, P., Paschereit, C. O., and Magni, F. — On the Use in Inlet Ducts, Computational Fluid Dynamics Analysis, and
of Helmholtz Resonators for Damping Acoustic Pulsations in Wind Tunnel Experiments. 126, 571-580
Industrial Gas Turbines. 126, 271-275 , Meher-Homji, Cyrus B., and Mee, Thomas, III Inlet
Benjamin, Michael A. — (see Mansour, Adel) 126, 465-471 Fogging of Gas Turbine Engines Part I: Fog Droplet
Bhargava, R., Bianchi, M., Peretto, A., and Spina, P. R. Thermodynamics, Heat Transfer, and Practical Considerations
Feasibility Study of Existing Gas Turbines for Recuperated, 126, 545-558
Intercooled, and Reheat Cycle. 126, 531-544 , Meher-Homji, Cyrus B., and Mee, Thomas, Il Inlet
Bianchi, M. — (see Bhargava, R.) 126, 531-544 Fogging of Gas Turbine Engines Part Il: Fog Droplet
Bijwe, J. — (see Agarwal, A. K.) 126, 199(E) Sizing Analysis, Nozzle Types, Measurement, and Testing
Bolland, O. — (see Brandvoll, ©.) 126, 316-321 126, 559-570
Bollard, Olav — (see Jordal, Kristin) 126, 507-515 Chang, J. R. (see Shiau, T. N.) 126, 401-407
Boncompagni, L. — (see Campanari, S.) 126, 92-101 Chen, A. G., Maloney, Daniel J., and Day, William H. Humid Air
Bonello, Philip, Brennan, Michael J., and Holmes, Roy A Study of NO, Reduction Effect on Liquid Fuel Combustion. 126, 69-74
the Nonlinear Interaction Between an Eccentric Squeeze Film Chew, J. W. — (see Cao, C.) 126, 786-793
Damper and an Unbalanced Flexible Rotor. 126, 855-866 (see Guardino, C.) 126, 75-82
Borio, R. W. — (see Beér, J. M.) 126, 248-253 Chiesa, Paolo, and Macchi, Ennio — A Thermodynamic Analysis of
Boruta, M. — (see Korakianitis, T.) 126, 294-299 Different Options to Break 60% Electric Efficiency in Combined
(see Korakianitis, T.) 126, 475-481 Cycle Power Plants. 126, 770-785
Journal of Engineering for Gas Turbines and Power OCTOBER 2004, Vol. 126 / 925
Ching, C. Y. — (see Pawloski, J. L.) 126, 107-118 Escalante, A., Guzman, V., Parada, M., Medina, L., and Diaz, S. E.
Chmielniak, Tadeusz, Kosman, Gerard, and Kosman, Wojciech — Neural Network Emulation of a Magnetically Suspended
— Analysis of Cycle Configurations for the Modernization of Rotor. 126, 373-384
Combined Heat and Power Plant by Fitting a Gas Turbine System. Etheridge, C. — (see Elliott, F. G.) 126, 119-126
126, 816-822 Evesque, S. — (see Riley, A. J.) 126, 708-716
Choi, Dong-Chun, and Rhode, David L. — Development of a Two-
Dimensional Computational Fluid Dynamics Approach for
Computing Three-Dimensional Honeycomb Labyrinth Leakage.
Facchini, B. — (see Andreini, A.) 126, 83-91
126, 794-802 Fan, J. R., Luo, K., Zhang, X. Y., and Cen, K. C. — Large Eddy
Cole, M. O. T. — (see Keogh, P. S.) 126, 366-372
Simulation of the Anti-Erosion Characteristics of the Ribbed-
Coppo, Marco, Dongiovanni, Claudio, and Negri, Claudio
Bend in Gas-Solid Flows. 126, 672-679
— Numerical Analysis and Experimental Investigation of a Common
Farris, T. N. — (see Rajeev, P. T.) 126, 385-390
Rail-Type Diesel Injector. 126, 874-885
Feitz, Rolf D. — (see Ra, Youngchul) 126, 422-428
Costamagna, Paola — (see Magistri, Loredana) 126, 516-523
Fett, T., Munz, D., and Thun, G. — Fracture Toughness Testing on
Crommelin, G. A. K. — Small-Scale Well-Proven Inherently Safe
Bars Under Opposite Cylinder Loading. 126, 50-54
Nuclear Power Conversion. 126, 329-333
Fiaschi, D., Lombardi, L., and Tapinassi, L. — The Recuperative
Auto Thermal Reforming and Recuperative Reforming Gas
Turbine Power Cycles With CO, Removal—Part II: The Recuperative
Dan, Budhadipta — (see Ganguli, Ranjan) 126, 55-61 Reforming Cycle. 126, 62-68
Danov, Stan N., and Gupta, Ashwani K. — Modeling the Performance Fiveland, S. B. — (see Krishnan, S. R.) 126, 665-671
Characteristics of Diesel Engine Based Combined-Cycle Power Flohr, P. — (see Bellucci, V.) 126, 271-275
Plants—Part II: Results and Applications. 126, 35-39 Friswell, M. I. — (see Lees, A. W.) 126, 416-421
, and Gupta, Ashwanti K. — Modeling the Performance Fritz, J., Kroner, M., and Sattelmayer, T. — Flashback in a Swirl
Characteristics of Diesel Engine Based Combined-Cycle Burner With Cylindrical Premixing Zone. 126, 276-283
Power Plants—Part I: Mathematical Model. 126, 28-34 Fujii, T., and Takahashi, T. — Development of Operating Temperature
Das, L. M. — (see Agarwal, A. K.) 126, 199(E) Prediction Method Using Thermophysical Properties Change of
Day, William H. — (see Chen, A. G.) 126, 69-74 Thermal Barrier Coatings. 126, 102-106
DeLuca, Daniel P. — (see Naik, Rajiv A.) 126, 391-400
Denman, Paul A. — (see Walker, A. Duncan) 126, 717—725
De Santiago, Oscar C. — (see San Andres, Luis) 126, 408-415 Gandhidasan, P. — (see Al-Farayedhi, A. A.) 126, 178-191
Diakunchak, thor S., Gaul, Greg R., McQuiggan, Gerry, and Ganguli, Ranjan, and Dan, Budhadipta — Trend Shift Detection in
Southall, Leslie R. — Siemens Westinghouse Advanced Jet Engine Gas Path Measurements Using Cascaded Recursive
Turbine Systems Program Final Summary. 126, 524-530 Median Filter With Gradient and Laplacian Edge Detector.
Diaz, S. E. — (see Escalante, A.) 126, 373-384 126, 55-61
DiCristoforo, P. E., and Elledge, M. — Stress Redistribution for Gaul, Greg R. — (see Diakunchak, Thor S.) 126, 524-530
Increased Creep Life in the GE MS6001 B Second-Stage Geis, T., Dittmann, M., and Dullenkopf, K. — Cooling Air Temperature
Blade. 126, 127-130 Reduction in a Direct Transfer Preswirl System. 126, 809-815
Dittmann, M., Dullenkopf, K., and Wittig, S. — Discharge Ghosn, Louis J. — (see Tong, Michael T.) 126, 265-270
Coefficients of Rotating Short Orifices With Radiused and Chamfered Gong, W. — (see Krishnan, S. R.) 126, 665-671
Inlets. 126, 803-808 Gottlich, Emil — (see Jericha, Herbert) 126, 733-740
(see Geis, T.) 126, 809-815 Graham, M. D. — (see Roth, B. A.) 126, 40-44
Dongiovanni, Claudio — (see Coppo, Marco) 126, 874—885 Guardino, C., Chew, J. W., and Hills, N. J. — Calculation of Surface
Dowling, A. P. — (see Riley, A. J.) 126, 708-716 Roughness Effects on Air-Riding Seals. 126, 75-82
Dullenkopf, K. — (see Dittmann, M.) 126, 803-808 Gupta, A. K. — Thermal Characteristics of Gaseous Fuel Flames Using
(see Geis, T.) 126, 809-815 High Temperature Air. 126, 9-19
Dummel, Lutz — (see Leusden, Christoph Pels) 126, 763—769 (see Hino, Y.) 126, 20-27
Dyer, R. — (see Korakianitis, T ) 126, 300—305 Gupta, Ashwani K. — (see Danov, Stan N.) 126, 35—39
(see Jinno, D.) 126, 685-692
Gupta, Ashwanti K. — (see Danov, Stan N.) 126, 28-34
Ebina, Kosuke — (see Kurosaki, Masahiro) 126, 726-732 Guzman, V. — (see Escalante, A.) 126, 373-384
El-Kabbany, A. S. — (see El-Shafei, A.) 126, 604—609
Elledge, M. — (see DiCristoforo, P. E.) 126, 127-130
Elliott, F. G., Kurz, R., Etheridge, C., and O’Connell, J. P. — Fuel Halliwell, lan — (see Tong, Michael T.) 126, 265-270
System Suitability Considerations for Industrial Gas Turbines Hashimoto, S. — (see Nakane, H.) 126, 342-350
126, 119-126 Hayden, M. — (see Stephens, L. S.) 126, 147-154
Elliott, L., Ingham, D. B., Kyne, A. G., Mera, N. S., Pourkashanian, Haynes, J. M. — (see Beér, J. M.) 126, 248-253
M., and Wilson, C. W. — A Novel Approach to the Optimization Heitmeir, Franz — (see Jericha, Herbert) 126, 733-740
of Reaction Rate Parameters for Methane Combustion Using Hills, N. J. — (see Guardino, C.) 126, 75-82
Multi-Objective Genetic Algorithms. 126, 455-464 Hino, Y., Sugiyama, S., Suzukawa, Y., Mori, 1., Konishi, N., Ishiguro,
El-Shafei, A., El-Kabbany, A. S., and Younan, A. A. — Rotor T., Kitawawa, K., and Gupta, A. K. — Two-Dimensional
Balancing Without Trial Weights. 126, 604—609 Spectroscopic Observation of Nonluminous Flames in a Regenerative
Endoh, Makoto — (see Kurosaki, Masahiro) 126, 726-732 Industrial Furnace Using Coal Gas. 126, 20-27
Engdar, Ulf, Nilsson, Per, and Klingmann, Jens — Investigation of Hogg, S. I. — (see Cao, C.) 126, 786-793
Turbulence Models Applied to Premixed Combustion Using a Holmes, Roy — (see Bonello, Philip) 126, 855-866
Level-Set Flamelet Library Approach. 126, 701-707 Honnet, S. — (see Riesmeier, E.) 126, 899-905
Enright, M. P. — (see Leverant, G. R.) 126, 155-159 Horlock, Elsevier Science Ltd, Kidlington, Oxford, 2003.
Epstein, Alan H. — Millimeter-Scale, Micro-Electro-Mechanical REVIEWED BY WILLIAM W. BATHIE1, J. H. — Advanced
Systems Gas Turbine Engines. 126, 205-226 Gas Turbine Cycles. 126, 924
926 / Vol. 126, OCTOBER 2004 Transactions of the ASME
Hountalas, D. T., Kouremenos, D. A., and Sideris, M. — A , Meyer, L., Boruta, M., and McCormick, H. E. One-Disk
Diagnostic Method for Heavy-Duty Diesel Engines Used in Stationary Nutating-Engine Performance for Unmanned Aerial Vehicles
Applications. 126, 886-898 126, 475-481
Hsu, W. C. — (see Shiau, T. N.) 126, 401-407 , Meyer, L., Boruta, M., and McCormick, H. E. Alternative
Huang, He, Spadaccini, Louis J., and Sobel, David R. — Fuel-Cooled Multinutating Disk Engine Configurations for Diverse Applications
Thermal Management for Advanced Aeroengines. 126, 284-293 126, 482-488
Kosman, Gerard (see Chmielniak, Tadeusz) 126, 816-822
Kosman, Wojciech — (see Chmielniak, Tadeusz) 126, 816—822
Kouremenos, D. A. (see Hountalas, D Lr.) 126, 886-898
Ikegami, Yasuyuki — (see Bai, Ou) 126, 445-454
Krishnan, S. R., Srinivasan, K. K., Singh, S., Bell, S. R., Midkiff, K.
Ingham, D. B. — (see Elliott, L.) 126, 455-464
C., Gong, W., Fiveland, S. B., and Willi, M. Strategies for
Ishiguro, T. — (see Hino, Y.) 126, 20—27
Reduced NO, Emissions in Pilot-lgnited Natural Gas
Ito, Koichi — (see Yokoyama, Ryohei) 126, 351-357 Engines. 126, 665-671
(see Yokoyama, Ryohei) 126, 823-830 Kroner, M. — (see Fritz, J.) 126, 276-283
(see Yokoyama, Ryohei) 126, 831-839 Kurosaki, Masahiro, Morioka, Tadashi, Ebina, Kosuke, Maruyama,
Masatoshi, Yasuda, Tomoshige, and Endoh, Makoto Fault
Detection and Identification in an IM270 Gas Turbine
Jericha, Herbert, Gottlich, Emil, Sanz, Wolfgang, and Heitmeir, Using Measurements for Engine Control. 126, 726-732
Franz — Design Optimization of the Graz Cycle Prototype Kurz, R. (see Elliott, f G.) 126, 119-126
Plant. 126, 733-740 Kurzke, J. (see Jeschke, P.) 126, 258-264
Jeschke, P., Kurzke, J., Schaber, R., and Riegler, C. — Preliminary Kyne, A. G. (see Elliott, I ) 126, 455-464
Gas Turbine Design Using the Multidisciplinary Design System
MOPEDS. 126, 258-264
Jinno, D., Gupta, Ashwani K., and Yoshikawa, K. Determination Langston, Lee S. Editorial. 126, 1(ED)
of Chemical Kinetic Parameters of Surrogate Solid Wastes Larkin, Louis J., and Philpott, James Implementation of a
126, 685-692 Multivariable Control. 126, 472—474
Johnston, James P. — (see Kang, Sangkyun) 126, 358-365 Lee, C. F. — (see Zeng, Yangbing) 126, 635-644
Jordal, Kristin, Bollard, Olav, and Klang, Ake Aspects of Cooled Lees, A. W., Sinha, J. K., and Friswell, M. L. The Identification of
Gas Turbine Modeling for the Semi-Closed O,/CO, Cycle With the Unbalance of a Flexible Rotating Machine From a Single
CO, Capture. 126, 507-515 Rundown. 126, 416-421
Leusden, Christoph Pels, Sorgenfrey, Christoph, and Dummel, Lutz
Performance Benefits Using Siemens Advanced Compressor
Cleaning System. 126, 763-769
Kang, Myoungcheol — (see Kong, Changduk) 126, 741-747 Leverant, G. R., Millwater, H. R., McClung, R. C., and Enright, M.
Kang, Sangkyun, Johnston, James P., Arima, Toshiyuki, Matsunaga, P. A New Tool for Design and Certification of Aircraft Turbine
Minoru, Tsuru, Hideaki, and Printz, Friedrich B. — Microscale Rotors. 126, 155-159
Radial-Flow Compressor Impeller Made of Silicon Nitride Li, Y., Kirkpatrick, A., Mitchell, C., and Willson, B. — Characteristic
Manufacturing and Performance. 126, 358-365 and Computational Fluid Dynamics Modeling of High-Pressure
Kasagi, Nobuhide — (see Uechi, Hideyuki) 126, 755-762 Gas Jet Injection 126, 192-197
Kascak, A. F. — (see Kenny, A.) 126, 142-146 Ling, J., Cao, Y., Rivir, R., and MacArthur, C. Analytical
Kefalakis, M. — (see Aretakis, N.) 126, 840-847 Investigations of Rotating Disks With and Without Incorporating
Kenny, A., Palazzolo, A., Montague, G. T., and Kascak, A. F. Rotating Heat Pipes. 126, 680—683(TB)
Theory and Test Correlation for Laminate Stacking Factor Effect Lombardi, L. — (see Fiaschi, D.) 126, 62-68
on Homopolar Bearing Stiffness. 126, 142-146 Luo, K. — (see Fan, J. R.) 126, 672-679
Keogh, P. S., Coie, M. O. T., Sahinkaya, M. N., and Burrows, C. R. Lyons, Kevin M. — (see Marley, Stephen K.) 126, 254-257
— On the Control of Synchronous Vibration in Rotor/Magnetic
Bearing Systems Involving Auxiliary Bearing Contact. 126, 366-372
Ki, Jayoung — (see Kong, Changduk) 126, 741-747 MacArthur, C. — (see Ling, J.) 126, 680—683(TB)
Kim, Gi-Heon, Kirkpatrick, Allan, and Mitchell, Charies Macchi, E. — (see Campanari, S$.) 126, 92-101
— Computational Modeling of Natural Gas Injection in a Large Bore Macchi, Ennio — (see Campanari, Stefano) 126, 581-589
Engine. 126, 656-664 (see Chiesa, Paolo) 126, 770-785
Kimijima, Shinji — (see Uechi, Hideyuki) 126, 755-762 Macsotai, N. I. — (see Roth, B. A.) 126, 40-44
Kirkpatrick, A. — (see Li, Y.) 126, 192-197 Maekawa, A. — (see Nakane, H.) 126, 342-350
Magistri, Loredana, Bozzo, Riccardo, “‘ostamagna, Paola, and
Kirkpatrick, Allan — (see Kim, Gi-Heon) 126, 656-664
Massardo, Aristide F. — Simplified Versus Detailed Solid
Kitawawa, K. — (see Hino, Y.) 126, 20-27
Oxide Fuel Cell Reactor Models and Influence on the Simulation of
Klang, Ake — (see Jordal, Kristin) 126, 507-515
the Design Point Performance of Hybrid Systems
Klingmann, Jens — (see Engdar, Ulf) 126, 701-707
126, 516-523
Kong, Changduk, Ki, Jayoung, and Kang, Myoungcheol — Fuzzy
Magni, F. — (see Bellucci, V.) 126, 271-27:
Approaches for Searching Optimal Component Matching Point
Maloney, Daniel J. — (see Chen, A. G.) 126, 69-74
in Gas Turbine Performance Simulation. 126, 741-747
Mansour, Adel, and Benjamin, Michael A. Emissions Performance
Konishi, N. — (see Hino, Y.) 126, 20-27 of the Parker Macrolaminate Premixer Tested Under Simulated
Konstantas, G. S. — (see Pontikakis, G. N.) 126, 906-923 Engine Conditions. 126, 465-471
Korakianitis, T., Dyer, R., and Subramanian, N. — Pre-integrated Marley, Stephen K., Welle, Eric J., and Lyons, Kevin M.
Nonequilibrium Combustion-Response Mapping for Gas Combustion Structures in Lifted Ethanol Spray
Turbine Emissions. 126, 300-305 Flames. 126, 254-257
, Meyer, L., Boruta, M., and McCormick, H. E. - Martinez-Frias, Joel, Aceves, Salvador M., Smith, J. Ray, and
Introduction and Performance Prediction of a Nutating-Disk Engine. Brandt, Harry Thermodynamic Analysis of Zero-
126, 294-299 Atmospheric Emissions Power Plant. 126, 2-8
Journal of Engineering for Gas Turbines and Power OCTOBER 2004, Vol. 126 / 927
Maruyama, Masatoshi — (see Kurosaki, Masahiro) 126, 726-732 Parsinejad, Farzan, Matio, Matyas, and Metghalchi, Mohamad — A
Massardo, Aristide F. — (see Magistri, Loredana) 126, 516-523 Mathematical Model for Schlieren and Shadowgraph Images of
(see Torbidoni, Leonardo) 126, 498-506 Transient Expanding Spherical Thin Flames. 126, 241-247
Mathioudakis, K. — Gas Turbine Test Parameters Corrections Paschereit, C. O. — (see Bellucci, V.) 126, 271-275
Including Operation With Water Injection. 126, 334-341 Patel, Chirag — (see Roth, Bryce) 126, 693-700
(see Aretakis, N.) 126, 840-847 Pawloski, J. L., Ching, C. Y., and Shoukri, M. — Measurement of
Matio, Matyas — (see Parsinejad, Farzan) 126, 241-247 Void Fraction and Pressure Drop of Air-Oil Two-Phase Flow in
Matsunaga, Minoru — (see Kang, Sangkyun) 126, 358-365 Horizontal Pipes. 126, 107-118
Mavris, D. N. — (see Roth, B. A.) 126, 40-44 Peretto, A. — (see Bhargava, R.) 126, 531-544
McCartt, B. — (see Stephens, L. S.) 126, 147-154 Peters, N. — (see Riesmeier, E.) 126, 899-905
Philpott, James — (see Larkin, Louis J.) 126, 472-474
McClung, R. C. — (see Leverant, G. R.) 126, 155-159
Pilidis, P. — (see Zwebek, A. I.) 126, 306-315
McCormick, H. E. — (see Korakianitis, T.) 126, 294-299
Pontikakis, G. N., Konstantas, G. S., and Stamatelos, A. M.
(see Korakianitis, T.) 126, 475-481
— Three-Way Catalytic Converter Modeling as a Modern Engineering
(see Korakianitis, T.) 126, 482-488
Design Tool. 126, 906-923
McGuirk, James J. — (see Walker, A.D uncan) 126, 717-725
Pourkashanian, M. — (see Elliott, L.) 126, 455-464
McQuiggan, Gerry — (see Diakunchak, Thor S.) 126, 524-530
Printz, Friedrich B. — (see Kang, Sangkyun) 126, 358-365
Meacock, A. J. — (see White, A. J.) 126, 748-754
Pulkrabek, Willard W. — Engineering Fundamentals of the Internal
Medina, L. — (see Escalante, A.) 126, 373-384
Combustion Engine, 2nd Ed. 126, 198(BR)
Mee, Thomas, III — (see Chaker, Mustapha) 126, 571-580
Puzinauskas, Paulius V., Olsen, Daniel B., and Willson, Bryan D.
Mee, Thomas, III — (see Chaker, Mustapha) 126, 545-558 — Cycle-Resolved NO Measurements ip a Two-Stroke Large-
(see Chaker, Mustapha) 126, 559-570 Bore Natural Gas Engine. 126, 429-441
Meher-Homji, Cyrus B. — (see Chaker, Mustapha) 126, 545-558
(see Chaker, Mustapha) 126, 559-570
(see Chaker, Mustapha) 126, 571-580
Ra, Youngchul, and Feitz, Rolf D. — A Model for Droplet
Mera, N. S. — (see Elliott, L.) 126, 455-464
Vaporization for Use in Gasoline and HCCI Engine Applications.
Metghalchi, Mohamad — (see Parsinejad, Farzan) 126, 241-247
126, 422-428
Meyer, L. — (see Korakianitis, T.) 126, 294-299 Rajeev, P. T., Murthy, H., and Farris, T: N. — Load History Effects
(see Korakianitis, T.) 126, 475-481 on Fretting Contacts of Isotropic Materials. 126, 385-390
(see Korakianitis, T.) 126, 482-488 Rakowski, James M. — The Oxidation of Metal Alloy Foils in the
Midkiff, K. C. — (see Krishnan, S. R.) 126, 665-671 Presence of Water Vapor. 126, 867-873
Mignolet, M. P. — (see Rivas-Guerra, A. J.) 126, 131-141 Reitz, R. D. — (see Canakci, M.) 126, 167-177
Millington, P. R. — (see Cao, C.) 126, 786-793 Rhode, David L. — (see Choi, Dong-Chun) 126, 794-802
Millwater, H. R. — (see Leverant, G. R.) 126, 155-159 Riegler, C. — (see Jeschke, P.) 126, 258-264
Mitchell, C. — (see Li, Y.) 126, 192-197 Riesmeier, E., Honnet, S., and Peters, N. — Flamelet Modeling of
Mitchell, Charles — (see Kim, Gi-Heon) 126, 656-664 Pollutant Formation in a Gas Turbine Combustion Chamber
Montague, G. T. — (see Kenny, A.) 126, 142-146 Using Detailed Chemistry for a Kerosene Model Fuel. 126, 899-905
Mori, I. — (see Hino, Y.) 126, 20-27 Riley, A. J., Park, S., Dowling, A. P., Evesque, S., and
Morioka, Tadashi — (see Kurosaki, Masahiro) 126, 726-732 Annaswamy, A. M. — Advanced Closed-Loop Control on an
Munz, D. — (see Fett, T.) 126, 50-54 Atmospheric Gaseous Lean-Premixed Combustor. 126, 708-716
Murata, Tatsuhiro — (see Yokoyama, Ryohei) 126, 823-830 Rivas-Guerra, A. J., and Mignolet, M. P. — Local/Global Effects of
Murthy, H. — (see Rajeev, P. T.) 126, 385-390 Mistuning on the Forced Response of Bladed Disks. 126, 131-141
Rivir, R. — (see Ling, J.) 126, 680-—683(TB)
Roth, B. A., Graham, M. D., Mavris, D. N., and Macsotai, N. I.
— Adaptive Selection of Aircraft Engine Technologies in the
Naik, Rajiv A., DeLuca, Daniel P., and Shah, Dilip M. — Critical Presence of Risk. 126, 40-44
Plane Fatigue Modeling and Characterization of Single Crystal Roth, Bryce, and Patel, Chirag — Application of Genetic Algorithms
Nickel Superalloys. 126, 391-400 in the Engine Technology Selection Process. 126, 693-700
Nakamura, Masatoshi — (see Bai, Ou) 126, 445-454 Rutland, Christopher J. — (see Schmidt, David P.) 126, 227—233
Nakane, H., Maekawa, A., Akita, E., Akagi, K., Nakano, T.,
Nishimoto, S., Hashimoto, S., Shinohara, T., and Uehara, H.
— The Development of High-Performance Leaf Seals. Sahinkaya, M. N. — (see Keogh, P. S.) 126, 366-372
126, 342-350
Sakano, K. — (see Yamashita, Y.) 126, 160-166
Nakano, T. — (see Nakane, H.) 126, 342-350 San Andres, Luis, and De Santiago, Oscar C. — Dynamic Response
Negri, Claudio — (see Coppo, Marco) 126, 874-885 of Squeeze Film Dampers Operating With Bubbly Mixtures.
Nicoletti, Rodrigo — (see Santos, Ilmar F.) 126, 848-854 126, 408-415
Nilsson, Per — (see Engdar, Ulf) 126, 701-707 Santos, Ilmar F., Nicoletti, Rodrigo, and Scalabrin, Alexandre
Nishimoto, S. — (see Nakane, H.) 126, 342-350 — Feasibility of Applying Active Lubrication to Reduce
Vibration in Industrial Compressors. 126, 848-854
Sanz, Wolfgang — (see Jericha, Herbert) 126, 733-740
Sattelmayer, T. — (see Fritz, J.) 126, 276-283
O'Connell, J. P. — (see Elliott, F. G.) 126, 119-126
Scalabrin, Alexandre — (see Santos, Ilmar F.) 126, 848-854
Olsen, Daniel B. — (see Puzinauskas, Paulius V.) 126, 429-441
Schaber, R. — (see Jeschke, P.) 126, 258-264
Schmidt, David P., and Rutland, Christopher J. — Reducing Grid
Dependency in Droplet Collision Modeling. 126, 227-233
Palazzolo, A. — (see Kenny, A.) 126, 142-146 Shah, Dilip M. — (see Naik, Rajiv A.) 126, 391-400
Papailiou, K. — (see Aretakis, N.) 126, 840-847 Shiau, T. N., Hsu, W. C., and Chang, J. R. — Dynamic Response of a
Parada, M. — (see Escalante, A.) 126, 373-384 Hydrodynamic Thrust Bearing-Mounted Rotor. 126, 401-407
Park, S. — (see Riley, A. J.) 126, 708-716 Shinohara, T. — (see Nakane, H.) 126, 342-350
928 / Vol. 126, OCTOBER 2004 Transactions of the ASME
Shinozaki, M. — (see Yamashita, Y.) 126, 160—166 Uehara, Haruo — (see Bai, Ou) 126, 445-454
Shoukri, M. — (see Pawloski, J. L.) 126, 107-118 Utamura, Motoaki — Carbon Dioxide Emission Analysis With Energy
Sideris, M. — (see Hountalas, D. T.) 126, 886—898 Payback Effect. 126, 322-328
Singh, S. — (see Krishnan, S. R.) 126, 665-671
Sinha, J. K. — (see Lees, A. W.) 126, 416-421
Siripuram, R. — (see Stephens, L. S.) 126, 147-154 Verrilli, M. J., and Brewer, D. — Characterization of Ceramic Matrix
Smith, J. Ray — (see Martinez-Frias, Joel) 126, 2-8 Composite Fasteners Exposed in a Combustor Linear Rig Test
Sobel, David R. — (see Huang, He) 126, 284—293 126, 45-49
Soize, C. — (see Capiez-Lernout, E.) 126, 610-618
Song, Bum Ho, and Song, Seung Jin — Lateral Forces From Single
Gland Rotor Labyrinth Seals in Turbines. 126, 626-634 Walker, A. Duncan, Denman, Paul A., and McGuirk, James J.
Song, Seung Jin — (see Song, Bum Ho) 126, 626-634 Experimental and Computational Study of Hybrid
Sorgenfrey, Christoph — (see Leusden, Christoph Pels) 126, 763-769 Diffusers for Gas Turbine Combustors. 126, 717-725
Southall, Leslie R. — (see Diakunchak, thor S.) 126, 524-530 Welle, Eric 4 (see Marley, Stephen K.) 126, 254-257
Spadaccini, Louis J. — (see Huang, He) 126, 284-293 White, A. J., and Meacock. A. J. An Evaluation of the Effects of
Spina, P. R. — (see Bhargava, R.) 126, 531-544 Water Injection on Compressor Performance. 126, 748-754
Srinivasan, K. K. — (see Krishnan, S. R.) 126, 665-671 Willi, M. (see Krishnan, S. R.) 126, 665-671
Stamatelos, A. M. — (see Pontikakis, G. N.) 126, 906-923 Willson, B. (see Li, Y.) 126, 192-197
Stanley, R., and Taraza, D. A Characteristic Parameter to Estimate Willson, Bryan D. — (see Puzinauskas, Paulius V.) 126, 429-44]
the Optimum Counterweight Mass of Symmetric In-Line Engines Wilson, C. W. (see Elliot, L.) 126, 455-464
Wittig, S. (see Dittmann, M.) 126, 803-808
126, 645-655
Stephens, L. S., Siripuram, R., Hayden, M., and McCartt, B.
Deterministic Micro Asperities on Bearings and Seals Using a
Modified LIGA Process. 126, 147-154 Xia, Zhiyong (see Caton, Jerald A.) 126, 234-240
Subramanian, N. — (see Korakianitis, T.) 126, 300-305
Sugiyama, S. — (see Hino, Y.) 126, 20-27
Suzukawa, Y. — (see Hino, Y.) 126, 20-27 Yamashita, Y., Shinozaki, M., Ueda, Y., and Sakano, K. — Fatigue
Crack Growth Life Prediction for Surface Crack Located in
Stress Concentration Part Based on the Three-Dimensional Finite
Takahashi, T. ~(see Fujii, T.) 126, 102-106 Element Method. 126, 160-166
Tapinassi, L. (see Fiaschi, D.) 126, 62-68 Yasuda, Tomoshige — (see Kurosaki, Masahiro) 126, 726-732
Taraza, D. — (see Stanley, R.) 126, 645-655 Yokoyama, Ryohei, and Ito, Koichi — Effect of Inlet Air Cooling by
Thun, G. — (see Fett, T.) 126, 50-54 Ice Storage on Unit Sizing of a Gas Turbine Cogeneration Plant
126, 351-357
Tong, Michael T., Halliwell, lan, and Ghosn, Louis J. A Computer
, and Ito, Koichi Evaluation of Operational Performance of
Code for Gas Turbine Engine Weight and Disk Life Estimation
Gas Turbine Cogeneration Plants Using an Optimization Tool
126, 265-270
OPS-Operation. 126, 831-839
Toqan, M. A. — (see Beer, J. M.) 126, 248-253
, Ito, Koichi, and Murata, Tatsuhiro Robust Optimal Design
Torbidoni, Leonardo, and Massardo, Aristide F. Analytical Blade
in Multistage Expansion of a Gas Turbine Cogeneration Plant
Row Cooling Model for Innovative Gas Turbine Cycle Evaluations
Under Uncertain Energy Demands. 126, 823-830
Supported by Semi-Empirical Air-Cooled Blade Data. Yoshikawa, K. — (see Jinno, D.) 126, 685-692
126, 498-506 Younan, A. A. — (see El-Shafei, A.) 126, 604—609
Tsuru, Hideaki — (see Kang, Sangkyun) 126, 358-365
Tuccillo, Raffaele — (see Bozza, Fabio) 126, 489-497
4: Zeng, Yangbing, and Lee, C. F. Computations of Air/Fuel
Preparation Process in a Port-Injected Spark-Ignition Engine During
Uechi, Hideyuki, Kimijima, Shinji, and Kasagi, Nobuhide Cycle Cold-Starting Phase. 126, 635-644
Analysis of Gas Turbine—Fuel Cell Cycle Hybrid Micro Zhang, X. Y. (see Fan, J. R.) 126, 672—679
Generation System. 126, 755-762 Zwebek, A. L, and Pilidis, P. Degradation Effects on Combined
Ueda, Y. — (see Yamashita, Y.) 126, 160-166 Cycle Power Plant Performance Part III: Gas and Steam
Uehara, H. — (see Nakane, H.) 126, 342-350 Turbine Component Degradation Effects. 126, 306-315
Journal of Engineering for Gas Turbines and Power OCTOBER 2004, Vol. 126 / 929