Jom 2006: Vol 58 Index

2006·3.1 MB·English

AUTHOR INDEX TO JOM, VOLUME 58
JANUARY-DECEMBER 2006
Finnigan, and D, Gao, November. pp. 36-41 ‘AO, F. “Ruthenium-Containing Bond Coats for
BACKMAN, D.G. “Integrated Computational Thermal Barrier Coating Systems.” B. Tryon, I
ABBOTT, D. “The Root Cause of Black Pad Failure Materials Engineering: A New Paradigm for the Cao, K.S. Murphy, C.G. Levi, and T.M. Pollock,
of Solder Joints with Electroless Ni/Immersion Gold Global Materials Profession,” J. Allison, D.B ackman January,p p. 53-59
Plating.” K. Zeng. R. Stierman, D. Abbott. and M ind L. Christodoulou. November. pp. 25 ‘ARLT. B“SoliEdifiRcatioGn St,udie s of Automotive
Murtuza, June, pp. 75-79. BENSON, D.J. “The Deformation Physics otf Heat Exchanger Materials.” T. Carlberg,M . Jaradeh.
AGNEW, S.R. “Mg Sheet Metal Forming: Lessons Nanocrystalline Metals: Experiments, Analysis. and and H. Kamgou Kamga, November, pp. 56-61
Leafrorm Dneepe Dradwin g LiandY Solid-Solution Computations.” M.A. Meyers, A. Mishra, and D.J HADA, S. “Lead-Free Implementation: Reliability.
Alloys.” S.R. Agnew, J.W. Senn, and J.A. Horton, Benson, April.p p. 41-48 Alloy Development, and New Technology.” S
May, pp 62-69. BILLINGE, S.J.L. “Structure Determination and Chada, June, p. 56
AKHTAR, A. “The Oxidation of Single-Crystal Phase Analysis by the Use of Neutron Diffraction.” ‘HAKKA, V.M. “The Pulse-Thermal Processing of
Nickel-Based Superalloys.” A. Akhtar, S. Hegde, S.J.L. Billinge, March, pp. 47-5 1: www.tms.ore/pubs NdFeB-Based Nanocomposite Magnets.” Z.Q. Jin,
and R.C. Reed, January, pp. 37-42 journals/JOM/0603/Billinge-0603 hit V.M. Chakka, Z.L. Wang, J.P. Liu, P. Kadolkara,n d
ALLISON, J.E. “Integrated Computational Materials BINCZEWSKI, G. “Letter to the R.D. Ott, June, pp. 46-49
Engineering: A New Paradigm for the Global Binezewski. June. pp. 4-5 ‘HANDRA, D. “Metal Hydrides for Vehiculat
Materials Profession.” J. Allison, D. Backman. and BODDE, S. “Structural Biological Composites: An \pplications: The State of the Art.” D. Chandra, J.J
L. Christodoulou, November, pp. 25—-2 Overvie M.A. Meyers. A. Y.M. Lin. Y. Seki, P.-Y Reilly, and R. Chellappa. February, pp. 26-32
ALLISON, J.E. “Virtual Aluminum Castings: An Chen. B.K. Kad, and S. Bodde. July, pp. 35—41 "HANG, Y.A. “An Investigation of Phase
Industrial Application of ICME.” J.E. Allison BRADY, M.P. “The Formation of Protective Nitride Transformation Behavior in Sputter-Deposited
M. Li, C. Wolverton, and X.-M. Su, November, Surfaces for PEM Fuel Cell Metallic Bipolar PtMn Thin Films,” C.-X. Ji, P.F. Ladwig, R.D. Ott
pp. 28-35, www.tms.org/pubs/journals/jom/061 1 Plates.” M.P. Brady, B. Yang, H. Wang. J.A. Turner. Y. Yang, J.J. Yang. Y.A. Chang, E.S. Linville, J.Gao
allison-0611 html K.L. More. M. Wilson, and F. Garzon, August. ind B.B. Pant, June. pp. 50-54
ANDERSON, C.G. “The Design-of-Experiment pp. 50-57 CHAWLA, K.K.“Metal-Matrix Compositeisn Ground
Optimization and Development of Cobaltite Ore BRAUN, R. “Recent Progreins tshe Coating Protection Transportation.” N. Chawla and K.K. Chawla,
Mineral Processing.” C.G. Anderson, October. of Gamma Titanium-Aluminides.” C. Leyens, P-Eh November, pp. 67-70
pp. 43-46 Hovsepian, R. Braun. and M. Frohlich, January. ‘HAWLA, N. “Metal-Matrix Composites in Ground
ANDERSON, I. “Neutron Sources in North America pp 17 7A wirms.ore/pubs/journ m/0601 Transportation.” N. Chawla and K.K. Chawla,
Present and Future.” T.M. Holden, A.D. Krawitz, evens-060] November, pp. 67-70
and I. Anderson, March, pp. 64-67 BRESLIN, M.C. “Co-Continuous Composite ‘HAWLA, N. “Novel Rare-Earth-Containing Lead
APELIAN, D. “Re-Engineering Engineering Materials for Friction and Braking Applications.” Free Solders with Enhanced Ductility.” M.A. Dudek,
Education forthe Challengeso f the 2! stCentury.”G G.S. Daehn and M.C. Breslin. November, pp R.S. Sidhu, and N. Chawla, June, pp. 57-62
Tryggvason and D. Apelian, October, pp. 14-17 Ss QO] ‘HELLAPPA, R. “Metal Hydrides for Vehicular
APPLEFORD, M. “The Characterization and BROOKS, G. “The Carbothermic Route to \pplications: The Stateo f the Art.”D .C handra, J.J
Developmento f Bioactive Hydroxyapatite Coatings.” Magnesium. G. Brooks, S. Trang. P. Witt, M.N.H Reilly, and R. Chellappa, February, pp. 26-32
J.L. Ong, M. Appleford, S. Oh, Y. Yang, W.-H Khan, and M. Nagle. May pp 51-55 ‘HEN, L.-Q. “Linking Length Scales via Materials
Chen, J.D. Bumgardner, and W.O. Haggard, July. BRYHAN, A. “Letter to the Editor” A. Bryhan, Informatics,” Z.-K. Liu, L.-Q. Chen, and K. Rajan,
pp. 67-69 June. p + November,pp . 42-50
APPLEFORD, M. “Enhancing Osseointegration BUCZEK, M.B. “ICME at GE: Accelerating the ‘HEN, M. “Sustainable Recycling of Automotive
Using Surface-Modified Titanium Implants.” Y Insertion of New Materials and Processes.” D.G Products in China: Technology and Regulation.”
Yang, N. Oh, Y. Liu,W . CheSn., O h. M. Appleford, Jackman. D.Y. Wei. D.D. Whitis. M.B. Buczek.P. M M. Chen, August,p p. 23-26
S. KiKm. K,im, S. Park. J. BumgardWn. eHagrga,rd . Finnigan, and D. Gao, November, pp. 36-41 CHEN, M. “The 2005 International Workshop on
and J. Ong, July. pp. 71-76 BUMGARDNER, J.D. “The Cha racterization Sustainable Manufacturing.” M. Chen, February
ARKHIPOV, G.V. “The Mathematical Modeling and Development of Bioactive Hydroxyapatite pp. 39-40
of Aluminum Reduction Cells.” G.V.Arkhipoy, Coatings.” J.L. Ong. M. Appleford, S. Oh. Y. Yang, ‘HEN, P.-Y. “Structural Biological Composites: An
February, pp. 54-56 W.-H. Chen, J.D. Bumgardnera,n d W.O. Haggard, Overview.” M.A. Meyers. A. Y.M. Lin, Y. Seki. P.-¥
ATKINSON, H.V. “Flow Visualization for Semi July pp 67-69 Chen, B.K. Kad. and S. Bodde, July, pp. 35-41
Solid Processing.” H.V. Atkinson and P.J. Ward. BUMGARDNER, J.D. “Enhancing Osseointegration ‘HEN, T.T. “The X-Ray Tomography of a Siliceous
June, pp. 21-23. Using Surface-Modified Titanium Implants.” ¥ Silver Ore.” T.T. Chen, A. Sasov,J .E. Dutrizac, P.
ATWOOD, R.C. “Microporosity Formation during Yang, N. Oh, Y. Liu. W. Chen. S. Oh. M. Appleford. Kondos, and G. Poirier, March. pp. 41-4 41
the Solidification of Aluminum-Copper Alloys” S. Kim.K . Kim,S . Park. J.B umgardner, W. Haggard, ‘HEN, W. “Enhancing Osseointegration Using
(JOM-e), P.D. Lee, J. Wang, and R.C. Atwood. and J. Ong, July, pp. 71-76 Surface-Modified Titanium Implants.” Y. Yang, N
December, www.tnis.org/pubs/journals/JOM/06 12 BY KO, M. “2006 Engineering Salaries: Finding the Oh, Y. Liu, W. Chen, S. Oh, M. Appleford. S. Kim,
Lee/Lee-0612.html. Facts on Paper and On-Line.” M. Byko, December, K. Kim, S. Park, J. Bumgardner, W. Haggard, and
AUSTIN, P.C. “The Multivariable Model-Based pp. 14-15 J. Ong, July,pp . 71-76
Controlo f the Non-Alumina Electrolyte Variables in BY KO, M. “From the Open Pit to the Open Market ‘HEN, W.-H. “The Characteraindz Daevteiloopmnen t
Aluminum Smelting Cells,” F.S tevens McFadden,B Minerals Find Added Value as Collectibles.” M. of Bioactive Hydroxyapatite Coatings.” J.L. Ong,
Welch, and P.C. Austin, February, pp. 42-47. Byko, October, pp. 1 !—13 M. Appletord, S. Oh, Y. Yang, W.-H. Chen, J.D
AYALA, E.J. “The Sulfuric Acid Leaching of Bayer BYKO, M. “The History Channel Looks at the “Modern Bumgardner, and W.O. Haggard, July, pp. 67-69
Electrofilter Fines: A Practical Kinetical Approach” Marvels” of “Heavy Metals.” M. Byko, September, ‘HO, K.C. “The Modeling of Electric-Current-
J.P. Sancho Martinez, E.J. Ayala, M.P. Garefa pp. 12-15, wiww.stms.org/pubs/journals/jom/0609 Assisted Sintering to Produce Bulk Nanocrystalline
Coque, P.B. Fernandeza,n d A.D. Costales, August, hyko-0609.htn j Tungsten.” B. McWilliams, A. Zavaliangos, K.C.
pp 58-62. BYKO, M. “Talking with the Members of the Cho, and R.J. Dowding, April, pp. 67-71
AZWELL, D.E. “Increasing the Capacity of High Globalization of Materials R&D Study.” M. Byko, ‘HRISTODOULOU, L. “Integrated Computational
Efficiency Diffusion Fiber Beds in Smelter Gas March. pp. 14-16, 18 Materials Engineering: A New Paradigm for
Plants.” S. Ziebold and D.E. Azwell. October, pp BYKO, M. “When Things Get Small” Finds the Fun the Global Materials Profession?” J. Allison, D.
59-62. in Nanoscience.” M. Byko, August, p. 72. Backman, and L. Christodoulou, November, pp.
~_
‘LARK, L.P. “Titanium Investment Casting Defects:
\ Metallographic Overview,’J .D. Cotton, L.P. Clark,
BACKMAN, D.G. “ICME at GE: Accelerating the CAMM, D.M. “Flash-Assist RTP for Ultra-Shallow and H.R. Phelps, June, pp. 13-16.
Insertion of New Materials and Processes.” D.G. Junctions.” D.M.CammJ..C . Gelpey, T. Thrum, G.C. CLEARY, P.W. “The Design Modification and
Backman, D.Y. Wei, D.D. Whitis, M.B. Buczek, P.M. Stuart, and S. McCoy, June, pp. 32-34 Optimizoaft ain Iongnot Casting Wheel Using SPH™
2006 December ¢ JOM
(JOM-e), M. Prakash, P.W. Cleary, J. Grandfield, with Microstructural Development in TBCs.” B. Insertion of New Materials and Processes,” D.G.
P. Rohan, and V. Nguyen, December, www.tms Jayaraj. S. Vishweswariah, V.H. Desai, and Y.H. Backman, D.Y. Wei, D.D. Whitis, M.B. Buczek, P.M.
org/pubs/journals/JOM/06 12/Prakash/Prakash- Sohn, January, pp. 60-63. Finnigan, and D. Gao, November, pp. 36-41.
0612.htmi. DESAI, V. “Materials for High-Temperature FITZGERALD, T. “The Material Optimization and
COLE, A. “High-Density Plasma-Are Heating Studies Protection,” V. Desai, January, pp. 15-16. Reliability Characterization of an Indium-Solder
of FePt Thin Films,” A. Cole, G.B. ThompsonJ,. W DEY, S.R. “Nondestructive Approaches for 3-D Thermal Interface Material for CPU Packaging,” C.
Harrell,J .W eston, and R. Ott, June, pp. 39-42. Materials Characterization,” E.M. Lauridsen, S.R. Deppisch, T. Fitzgerald, A. Raman, F. Hua,C. Zhang,
COPLAND, E.H. “Predicting Oxide Stability in Dey, R.W. Fonda, and D. Juul Jensen, December. P. Liu, and M. Miller, June, pp. 67-74.
High-Temperature Water Vapor.” E.J. Opila, N.S. pp. 40-44. FONDA, R.W. “Nondestructive Approaches for 3-D
Jacobson, D.L. Myers, and E.H. Copland, January, DIAZ, C.M.°JOM World Nonferrous Smelter Survey, Materials Characterization.” E.M. Lauridsen, S.R.
pp. 22-28. Part HI: Nickel: Laterite.”” A.E.M. Warner, C.M. Dey, R.W. Fonda, and D. Juul Jensen, December,
COSTALES, A.D. “The Sulfuric Acid Leaching of Diaz, A.D. Dalvi, P.J. Mackey, and A.V. Tarasov, pp. 40-44.
Bayer Electrofilter Fines: A Practical Kinetical April, pp. 11-20. FREDERICK, A. “The Use of Friction-Stir
Approach,” J.P. Sancho Martinez, E.J. Ayala, M.P. DINWIDDIE, R.B. “Numerical Simulation of High- Technology to Modity the Surfaces of AM60B
Garcia Coque, P.B. Fernandez. and A.D. Costales, Density Plasma-Arc Processingo fF ePt Nanoparticle Magnesium Die Castings,” M. Santella, A. Frederick,
August, pp. 58-62 Films.” A.S. Sabau and R.B. Dinwiddie, June, pp. C. Degen, and T.-Y. Pan, May, pp. 56-61.
COTTON, J.D. “Titanium Investment Casting Defects: 35-38 FRIEDMAN, L.B. “The Commercialization of
\ Metallographic Overview,” J.D. Cotton, L.P. Clark, DIONNE, S. “The Characterization of Continuous Nanomaterials: Today and Tomorrow,” T.M. Osman,
and H.R. Phelps, June, pp. 13-16. Hot-Dip Galvanized and Galvannealed Steels.” S. D.E. Rardon, L.B. Friedman, and L.F. Vega, April.
COYLE, T.W. “Vacuum Plasma Spraying: A New Dionne, March, pp. 32-40. pp. 21-24: www.tms.org/pubs/journals/JOM/0604/
Concept for Manufacturing Ti-6AI-4V Structures,” DIPPENAAR, R. “In-Situ Observations of Phase Osman-060h4t.ml .
H.R. Salimijazi, T.W. Coyle, and J. Mostaghimi, Transformations in Titanium.” D. Phelan, M FROLICH, M. “Recent Progress in the Coating
September, pp. 50-56 Reid, N. Stanford, and R. Dippenaar, September, Protection of Gamma Titanium-Aluminides,” C.
CROSS, C.E. “Letter to the Editor” C.E. Cross, pp. 67-69. Leyens, P.Eh. Hovsepian, R. Brauannd, M . Frohlich,
June. p. 4. DOWDING, R.J. “The Modelingo f Electric-Current- January, pp. 17-21, www.tms.org/pubs/journals/
CUESTA, R. “Numerically Modeling Oxide Assisted Sintering to Produce Bulk Nanocrystalline jom/000 IHevens-0601 mil.
Entrainment in the Filling of Castings: The Effect Tungsten.” B. McWilliams, A. Zavaliangos, K.C. FULTZ, B. “Materials Science Applicaotfi Inoelnassti c
of the Webber Number,” R. Cuesta, A. Delgado, A. Cho, and R.J. Dowding, April, pp. 67-71 Neutron Scattering.” B. Fultz, March, pp. 58--63.
Maroto, and D. Mozo, November, pp. 62-65. DOWDING, R.J. “Nanoengineering Opens a New FULTZ, B. “Neutron Scattering Applied to Materials
CZERWINSKFI. “,Th e Basoif cMosder n Semi-Solid Era for Tungsten As Well.” Q. Wei, K.T. Ramesh, Problems,J”.R . Morris, X.-L. Wang, and B.T. Fultz,
Metal Processing.” F. Czerwinski, June, pp. 17-20: B.E. Schuster, L.J. Kecskes, and R.J. Dowding. March, p. 46.
www.tms.org/pubs/journals/jom/0606/czerwinski- September, pp. 40-44.
0606.html. DU, B. “PEM Fuel Cells: Status and Challenges for
Commercial Stationary Power Applications,” B. Du,
Q. Guo, R. Pollard, D. Rodriguez, C. Smith, and J. GAO, D. “ICME at GE: Accelerating the Insertion of
Elter, August, pp. 45-59. New Materials and Processes,” D.G. Backman, D.Y.
DAEHN, G.S. “Co-Continuous Composite Materials DUBE, R.K. “The Extraction*of Lead from. Its Wei, D.D. Whitis, M.B. Buczek, P.M. Finnigana,n d
for Friction and Braking ApplicationsG,.”S . Daehn Ores by the Iron-Reduction Process: A Historical D. Gao, November, pp. 36-41.
and M.C. Breslin, November, pp. 87-91. Perspective.” R.K. Dube, October, pp. 18-23. GAO, J. “An Investigation of Phase Transformation
DAHOTRE, N.B. “A Multi-Textured Calcium DUDEK, M.A. “Novel Rare-Earth-Containing Lead- Behavior in Sputter-Deposited PtMn Thin Films,”
Phosphate Coating for Hard Tissue via Laser Surface Free Solders with Enhanced Ductility.” M.A. Dudek. C.-X. Ji, PF. Ladwig, R.D. Ott, Y. Yang, J.J. Yang.
Engineering,” A. Kurella and N.B. Dahotre, July, R.S. Sidhu, and N. Chawla, June, pp. 57-62. Y.A. Chang, E.S. Linville. J. Gao, and B.B. Pant,
pp. 64-66. DUTRIZAC, J.E. “The X-Ray Tomography of a June, pp. 50-54.
DAHOTRE, N.B. “Surface Design and Effects in Siliceous Silver Ore,” T.T. Chen, A. Sasov, J-E. GARC {A COQUE,M.P. “The Sulfuric Acid Leaching
Biological Environment,” S. Seal and N.B. Dahotre, Dutrizac, P. Kondos, and G. Poirier, March, pp. of Bayer Electrofilter Fines: A Practical Kinetical
July, p. 51. 41-44. Approach,” J.P. Sancho Martinez, E.J. Ayala, M.P.
DALVI, A.D.“ JOM World Nonferrous Smelter Survey, Garcia Coque, P.B. Fernandez, and A.D. Costales,
Part III: Nickel: Laterite?” A.E.M. Warner, C.M. August, pp. 58-62.
Diaz, A.D. Dalvi, P.J. Mackey, and A.V. Tarasov, GARCIA, R. “About the Pre-Hispanic Au-Pt
April, pp. 11-20. ELTER, J. “PEM Fuel Cells: Status and Challenges “Sintering” Technique for Making Alloys.” M.
DAS, S. “Improving Aluminum Can Recycling Rates: for Commercial Stationary Power Applications,” B. Noguez, R. Garcia, G. Salas, T. Robert, and J.
A Six Sigma Study in Kentucky.” S. Das and M. Du, Q. Guo, R. Pollard, D. Rodriguez,C .S mith, and Ramirez. May, pp. 38-43
Hughes, August. pp. 27-31, www.ims.org/pubs/ J. Elter, August, pp. 45-59. GARZON, F. “The Formation of Protective Nitride
journals/jom/0608/das-060ht8m.l . ELWAZRI, A.M. “Materials Characterization Using Surfaces for PEM Fuel Cell Metallic Bipolar
DAVARI, M. “A Correlation-Based Model for High-Resolution Scanning-Electron Microscopy and Plates.” M.P. Brady, B. Yang, H.W ang, J.A. Turner,
Predicting Gas Extraction Performance in a Copper X-Ray Microanalysis.” R. Gauvin, K. Robertson, K.L. More, M. Wilson, and F. Garzon, August,
Converting Plant.” C.B. Solnordal, P.J. Witt, A. P. Horny, A.M. Elwazri, and S$. Yue, March, pp. pp. 50-57.
Manzoori, H. Namavari, E. Niknejad, and M. Davari, 20-26. GAUVIN, R. “Materials Characterization Using
October, pp. 51-55. ESTRIN, Y. “Producing Bulk Ultrafine-Grained High-Resolution Scanning-Electron Microscopy and
DECKER, R.F. “The Evolution of Wrought Age- Materials by Severe Plastic Deformation.” R.Z. X-Ray Microanalysis.” R. Gauvin, K. Robertson,
Hardenable Superalloys.” R.F. Decker, September, Valiev, Y. Estrin, Z. Horita, T.G. Langdon, M.J. P. Horny, A.M. Elwazri, and S. Yue, March, pp.
pp. 32-36. Zehetbauer, and Y.T. Zhu, April, pp. 33-39. 20-26.
DEGEN, C. “The Use of Friction-Stir Technology to GELPEY, J.C. “Flash-Assist RTP for Ultra-Shallow
Modify the Surfaces of AM60B Magnesium Die Junctions,” D.M.Camm, J.C. Gelpey. T. Thrum, G.C.
Castings,” M. Santella, A. Frederick, C. Degen, and Stuart, and S. McCoy, June, pp. 32-34.
T.-Y. Pan, May. pp. 56-61. FELDER, A. “Lead Alloys for Permanent Anodes in GELTMACHER, A.B. “Quantitative Analysis and
DeGRAEF, M. “A Modern 3-D View of an Old the Nonferrous Metals Industry,” A. Felderand R.D. Feature Recognition in 3-D Microstructural Data
“Pearlite” Colony,” M. DeGraef, M.V. Kral, and M. Prengaman, October, pp. 28-31. Sets.” A.C. Lewis, C. Suh, M. Stukowski, A.B.
Hillert, December, pp. 25-28. FERNANDEZ, P.B. “The Sulfuric Acid Leaching Geltmacher, G. Spanos, and K. Rajan, December,
DELGADO, A. “Numerically Modeling Oxide of Bayer Electrofilter Fines: A Practical Kinetical pp. 52-56.
Entrainment in the Filling of Castings: The Effect Approach.” J.P. Sancho Martinez, E.J. Ayala, M.P. GHOMASHCHI, R. “The Microstructural
of the Webber Number.” R. Cuesta, A. Delgado, A. Garcia Coque, P.B. Fernandez, and A.D. Costales, Characterization of Semi-Solid Slurries.” S. Nafisi
Maroto, and D. Mozo, November, pp. 62-65. August, pp. 58-62. and R. Ghomashchi, June, pp. 24-30.
DEPPISCH, C. “The Material Optimization and FEUERBACH, A. “Crucible Damascus Steel: A GIBBON, D.L. “How Roebling Did It: Building the
Reliability Characterization of an Indium-Solder Fascination for Almost 2,000 Years.” A. Feuerbach, World’s First Wire-Rope Suspension Aqueduct in
Thermal Interface Material for CPU Packaging,”C . May, pp. 48-50. 1840s Pittsburgh,” D.L. Gibbon, May, pp. 20-29;
Deppisch, T. Fitzgerald, A. Raman, F. Hua, C. Zhang, FIKSEL, J. “A Framework for Sustainable Materials wwiw.tms.org/pubs/journals/JOM/0605/Gibbon-
P. Liu, and M. Miller, June, pp. 67-74. Management,” J. Fiksel, August, pp. 15-22. 0605.html.
DESAI, V. “Changes in Electrochemical Impedance FINNIGAN, P.M. “ICME at GE: Accelerating the GORDON, R. “Silver Cycles: The Stocks and Flows
58 JOM ¢ December 2006
Project, Part 32° J. Johnson, R. Gordon, and T. HOLBERY, J. “Natural-Fiber-Reinforced Polymer Project, Part 3.° J. Johnson. R. Gordon. and 7
Graedel, February, pp. 34-38 Compositesi n Automotive Applications,” J.H olbery Graedel, February, pp. 34-38
GRAEDET.L “S,ilv er Cycles: The Stocks and Flows and D. Houston, November, pp. 80-86. JUUL JENSEN, D. “Nondestructive Approaches for
Project, Part 32° J. Johnson. R. Gordon, and T. HOLDEN, T.H. “Neutron Sources in North America: 3-D Materials Characterization.” E.M. Lauridsen.
Graedel, February, pp. 34-38. Present and Future,” T.M. Holden, A.D. Krawitz. S.R. Dey, R.W. Fonda, and D. Juul Jensen, December,
GRANDE, T. “The Stability of Retractory Oxides in and I. Anderson, March, pp. 64-67. pp. 40-44
Sodium-Rich Environments,” C. Schoning and T HORITA, Z. “Producing Bulk Ultrafine-Grained
Grande, February, pp. 58-61. Materials by Severe Plastic Deformation.” R.Z.
GRANDFIELD, J. “The Design Modification and Valiev, Y. Estrin, Z. Horita, T.G. Langdon, M.J
Optimizationo f an Ingot Casting Wheel Using SPH” Zehetbauearn,d Y.T. Zhu, April,pp . 33-39. KAD, B.K. “Structural Biological Composites: An
(JOM-e), M. Prakash, P.W. Cleary, J. Grandfield. HORNY, P. “Materials Characterization Using High- Overview,” M.A. Meyers, A.Y.M. Lin, Y. Seki. P.-Y
P. Rohan, and V. Nguyen, December, www.tmy. Resolution Scanning-Electron Microscopy and Chen. B.K. Kad, and S. Bodde, July, pp. 35-41
org/pubs/journals/JOM/0612/Prakash/Prakash X-Ray Microanalysis.” R. Gauvin, K. Robertson. KADOLKAR, P. “Pulsed-Thermal Processing of
0612.html. P. Horny, A.M. Elwazri, and S. Yue, March, pp. Chemically Synthesized FePt Nanoparticles.” S. Shi,
GRANT, G. “Low-Cost Composites in Automotive 20-26. S. Kang, J. Lawson, Z. Jia, D.N ikles, J.W. Harrell,
and Heavy Vehicle Manufacture.” G. Grant, HORTON, J.A. “Mg Sheet Metal Forming: Lessons R. Ott, and P. Kadolkar, June, pp. 43-45
November, p. 66. Learned trom Deep Drawing LiandY Solid-Solution KADOLKAR, P. “The Pulse-Thermal Processing ot
GUO, Q. “PEM Fuel Cells: Status and Challenges for Alloys.” S.R. Agnew, J.W. Senn, and J.A. Horton, NdFeB-Based Nanocomposite Magnets.” Z.Q. Jin.
Commercial Stationary Power Applications,” B. Du. May, pp. 62-69. V.M. Chakka, Z.L. Wang, J.P. Liu, P. Kadolkar, and
Q. Guo, R. Pollard, D. Rodriguez. C. Smith, and J. HOSFORD, W.F. “The Anisotropy of Aluminum R.D. Ott. June, pp. 46-49
Elter, August, pp. 45-59. and Aluminum Alloys,” W.F. Hosford, May, pp. KAMGOU KAMGA, H. “Solidification Studies of
GUPTA, N. “Applicationso f Fly Ash in Synthesizing 70-74. Automotive Heat Exchanger Materials,” T. Carlberg.
Low-Cost MMCs for Automotive and Other HOUSTON, D. “Natural-Fiber-Reinforced Polymer M. Jaradeh, and H. Kamgou Kamga, November.
ApplicP.Ka. Rtohaitgio, nD. sWei,ss,” and N.G upta, Compositesi n Automotive Applications,” J. Holbery pp. 56-61. : 5
November, pp. 71-76. and D. Houston, November, pp. 80-86 KANS.G “P,uls ed-Thermal Procesofs Chiemnicagll y
GUPTA, N. “The Solidification Processing of Metal- HOVSEPIAN, P.Eh. “Recent Progress in the Coating Synthesized FePt Nanoparticles.” S. Shi, S. Kang. J
Matrix Composites: The Rohatgi Symposium.” Protection of Gamma Titanium-Aluminides,” C. Lawson, Z. Jia, D. Nikles, J.W. Harrell, R. Ott, and
N. Gupta and K.G. Satyanarayana, November. Leyens, P.Eh. Hovsepian, R. Braun, and M. Frohlich, P. Kadolkar, June, pp. 43-45
pp. 92-94. January, pp. 17-21, www.tms.org/pubs/journals KAPUSTA, J.P.T. “Cobalt Production and Markets:
jom/060 I/Aevens-0601 jimi. \ Brief Overview.” J.P.T. Kapusta, October, pp
HUA, F. “The Materia! Optimization and Reliability 33-36.
Characterization of an Indium-Solder Thermal KARAKOTI, A.S. “The Potential Toxicity of
HAGGARD, W. “The Characterization and Interface Material forCPU PackagiC.n Degpp,is”ch , Nanomaterials—The Role of Surfaces.” A.S.
Developofm Beionacttiv e Hydroxyapatite Coatings.” lr. Fitzgerald, A. Raman, F. Hua, C. Zhang, P. Liu, Karakoti, L.L. Hench, and S. Seal. July, pp
J.L. Ong. M. Appletord, S. Oh, Y. Yang, W.-H and M. Miller, June, pp. 67-74 7-82.
Chen, J.D. Bumgardner, and W.O. Haggard, July, HUGHES, M. “Improving AluminuCman Recycling KARATZANI, A. “The Use of Metal Threads
pp. 67-69. : Rates: A Six Sigma Study in Kentucky,” S. Das and and Decorations in Byzantine-Greek Orthodox
HAGGARD, W. “Enhancing Osseointegration Using M. Hughes, August, pp. 27 31, wwiw.tms.org/pubs/ Ecclesiastical Textiles,” A.Karatzanaind Th. Rehren.
Surface-Modified Titanium Implants,” Y. Yang, N. journals/jom/0608/das-060ht8m.l . May, pp. 34-37
Oh, Y. Liu, W. Chen, S. Oh, M. Appleford, S. Kim, HUGHESM,. “Understanding Recycling Behavior in KAWAGISHI, K. “The Oxidation Properties of
K. Kim, S. Park, J. Bumgardner, W. Haggard. and Kentucky: Who Recycles and Why,” F.W. Morgan Fourth Generation Single-Crystal Nickel-Based
J. Ong, July. pp. 71-76. and M.V. Hughes, August, pp. 32-35, Superalloys.” K. Kawagishi, H. Harada, A. Sato, A
HARADA, H. “The Oxidation Properties of HUNT, W.H., Jr. “Materials Informatics: Growing Sato, and T. Kobayashi, January, pp. 43-46.
Fourth Generation Single-Crystal Nickel-Based from the Bio World.” W.H. Hunt, Jr.. July, p. 88. KECSKES, L.J. “Nanoengineering Opens a New
Superalloys.” K. Kawagishi, H. Harada, A. Sato, A. Era for Tungsten As Well.” Q. Wei, K.T. Ramesh,
Sato, and T. Kobayashi, January, pp. 43-46. B.E. Schuster. L.J. Keceskes, and R.J. Dowding,
HARRELL, J.W. “High-Density Plasma-Are September, pp. 40-4.
Heating Studiofe FseP t Thin Films.” A. Cole, G.B. JACOBSON, N.S. “Predicting Oxide Stability in KHAN, M.N.H. “The Carbothermic Route to
Thompson, J.W. Harrell, J. Weston, and R. Ott. High-Temperature Water Vapor,” E.J. Opila, N.S. Magnesium.” G. Brooks, S. Trang, P. Witt. M.N.H.
June, pp. 39-42. Jacobson, D.L. Myers, and E.H. Copland, January, Khan. and M. Nagle, May, pp. 51-55.
HARRELL, J.W. “Pulsed-Thermal Processing of pp. 22-28. KIM, K. “Enhancing Osseointegration Using Surface-
Chemically SynthFeePt sNaniopazrtieclesd.” S.S hi, JARADEH,M. °S olidification Studies of Automotive Modified Titanium Implants,” Y. Yang, N. Oh. Y.
S. Kang, J. Lawson, Z. Jia, D. Nikles, J.W. Harrell, Heat Exchanger Materials.” T. Carlberg, M. Jaradeh, Liu, W. Chen, S. Oh, M. Appleford, S. Kim, K.
R. Ott, and P. Kadolkar, June, pp. 43-45. and H. Kamgou Kamga, November, pp. 56-61. Kim, S. Park, J. Bumgardner, W. Haggard, and J.
HEGDE, S. “The Oxidation of Single-Crystal Nickel- JAYARAJ, B. “Changes in Electrochemical Impedance Ong. July. pp. 71-76
Based Superalloys,” A. Akhtar. S. Hegde. and R.C. with Microstructural Development in TBCs,” B. KIM,S . “Enhancing Osseointegration Using Surface-
Reed, January, pp. 37-42. Jayaraj, S. Vishweswariah, V.H. Desai, and Y.H. Modified Titanium Implants,” Y. Yang, N. Oh, Y.
HENCH, L.L. “The Effect of Micro-Gravity and Sohn, January, pp. 60-63. Liu, W. Chen, S. Oh, M. Appleford, S. Kim, K.
Bioactive Surfacoens t he Mineralizoaft Boinoe.n” J. JEBBINK, P. “Expandthie nCogba lt Recovery Circuit Kim, S. Park, J. Bumgardner, W. Haggard, and J.
Maroothynaden and L.L. Hench, July, pp. 57-63. at the Thompson Nickel Refinery,” P. Jebbink, R. Ong. July, pp. 71-76.
HENCH, L.L. “The Potential Toxicity of Stefan, D. Neff, and M. Tomlinson, October, pp. KOBAYASHI, T. “The Oxidation Properties of
Nanomaterials—The Role of Surfaces.” A.S. 73 7-424 Fourth Generation Single-Crystal Nickel-Based
Karakoti, L.L. Hench, and S. Seal. July. pp. JI, C.-X. “An Investigation of Phase Transformation Superalloys,” K. Kawagishi, H. Harada, A. Sato, A
77-82. Behavior in Sputter-Deposited PtMn Thin Films,” Sato, and T. Kobayashi, January, pp. 43-46
HILDEMAN, G.J. “The History and Archaeology C.-X. Ji, PF. Ladwig, R.D. Ott. Y. Yang, J.J. Yang. KOHN, D.H. “UltrastChranugecs dturuinrg Faatlig ue
of Materials Symposium.” G.J. Hildeman, May, Y.A. Chang, E.S. Linville, J. Gao, and B.B. Pant. of Bone.” D.H. Kohn, July, pp. 46-50.
p. 19. June, pp. 50-54. KONDOS, P. “The X-Ray Tomography of a Siliceous
HILLERT, M. “A Modern 3-D View of an Old JIA, Z. “Pulsed-Thermail Processing of Chemically Silver Ore.” T.T. Chen, A. Sasov, J.E. Dutrizac, P.
“Pearlite” Colony,” M. DeGraef, M.V. Kral, and M. Synthesized FePt Nanoparticles,” S. Shi, S. Kang, Kondos, and G. Poirier, March, pp. 41-44.
Hillert, December, pp. 25-28. J. Lawson, Z. Jia, D. Nikles, J.W. Harrell, R. Ott, KONGOLI, F. “The Sohn International Symposium
HOBBS, L.W. “The Use of Functionally Gradient and P. Kadolkar, June, pp. 43-45. on Advanced Processing of Metals and Materials.”
Materials in Medicine,” R.J. Narayan, L.W. Hobbs, JIN, C. “The Use of Functionally Gradient Materials F. Kongoli, November, p. 95.
C. Jin, and A. Rabiei, July, pp. 52-56. in Medicine.” R.J. Narayan, L.W. Hobbs, C. Jin, and KRAL, M.V.“A Modern 3-D View of an Old “Pearlite™
HODGE, A. “Biological Materials Science in the \. Rabiei, July, pp. 52-56. Colony.” M. DeGraef. M.V. Kral. and M. Hillert,
TMS World.” A. Hodge and M. Meyers, July, pp. JIN, Z.Q. “The Pulse-Thermal Processing of NdFeB- December, pp. 25-28.
20-22. Based Nanocomposite Magnets,” Z.Q. Jin, V.M. KRAWIA.TD. Z“Neu,tro n Sources in North America:
HODGE, F.G. “The History of Solid-Solution- Chakka, Z.L. Wang, J.P. Liu, P. Kadolkar, and R.D. Present and Future,” T.M. Holden, A.D. Krawitz.
Strengthened Ni Alloys for Aqueous Corrosion Ott. June, pp. 46-49. and I. Anderson, March, pp. 64-67.
Service.” F.G. Hodge, September, pp. 28-31. JOHNSON, J. “Silver Cycles: The Stocks and Flows KURELLA, A. “A Multi-Textured Calcium
2006 December ¢ JOM 59
Phosphate Coating for Hard Tissue via Laser Surface Parks, and G.B. Olson, December, pp. 45-51. a Destination,” B. Mishra, July, pp. 14-16.
Engineering.” A. Kurella and N.B. Dahotre, July, LIU, Y. “Enhancing Osseointegration Using Surtace- MISHRA, R.S. “The Mechanics of Biological
pp. 64-66. Modified Titanium Implants,” Y. Yang, N. Oh, Y. Materials,” R. Mishra, July, p. 34.
Liu, W. Chen, S. Oh, M. Appleford, S. Kim, K. MORAN, B. “The 3-D Computational Modeling of
Kim, S. Park, J. Bumgardner, W. Haggard, and J Shear-Dominated Ductile Failure in Steel.” FJ.
Ong, July, pp. 71-76. Vernerey, C. McVeigh, W.K. Liu, B. Moran, D.
LADWIG, P.F. “An Investigation of Phase LIU, Z.-K. “Linking Length Scales via Materials Fewari, D.M. Parks, and G.B. Olson, December,
Transformation Behavior in Sputter-Deposited Informatics.” Z.-K. Liu, L.-Q. Chen, and K. Rajan. pp. 45-51.
PtMn Thin Films.” C.-X. Ji, P.F. Ladwig, R.D. Ott. November, pp. 42-50. MORE, K.L. “The Formation of Protective Nitride
Y. YanJ.J.g Ya.ng. Y.A. ChangE.,S. Linville, J.Gao, LOWE, T.C. “Metals and Alloys Nanostructured by Surfaces for PEM Fuel Cell Metallic Bipolar
and B.B. Pant, June, pp. 50-54. Severe Plastic Deformation: Commercialization Plates,” M.P. Brady, B. Yang, H. Wang, J.A. Turner,
LANGDT.GO. “PNrod,uci ng Bulk Ultrafine-Grained Pathways,” T.C. Lowe, April, pp. 28-32. K.L. More. M. Wilson, and F. Garzon, August.
Materials by Severe Plastic Deformation.” R.Z. LUDWIG, A. “Modeling Macrosegregation with a pp. 50-57.
Valiev. Y. Estrin, Z. Horita, T.G. Langdon, M.J. Multiphase Approach: Examples and Discussion” MORGAN, F.W. “Understanding Recycling Behavior
Zehetbauer, and Y.T. Zhu, April, pp. 33-39. (JOM-e), M. Wu and A. Ludwig, December, ww. in Kentucky: Who Recycles and Why,” F.W. Morgan
LAURIE.DM. S“NoEndeNstru,cti ve Approachefso r ms.org/pubs/journal1s2 //WJu/OWuM-/060 612 . 29
3-D Materials Characterization,” E.M. Lauridsen, html. MORRIS, J.R. “Neutron Scattering Applied to
S.R. Dey. R.W. Fonda, and D. Juul Jensen, December. Materials Problems,” J.R. Morris, X.-L. Wang, and
pp. 40-44 B.T. Fultz. March, p. 46.
LAVERNIA, E.J. “Multi-Scale Al 5083 for Military MOSTAJ.G VacHuum IPlaMsma ISpra,ying : AN ew
Vehiwcitlh eImpsrov ed Performance,” A.P. Newbery, MAE., “Eig ht Routes to Improve the Tensile Ductility Concept for Manufacturing Ti-6AIl-4V Structures.”
S.R. Nutt, and E.J. Lavernia, April, pp. 56-61. of Bulk Nanostructured Metals and Alloys.” E. Ma, H.R. Salimijazi, T. Coyle. and J. Mostaghimi,
LAWSON, J. “Pulsed-Thermal Processing of April, pp. 49-53. September, pp. 50-56.
Chemically SynthesizeFedP t NanoparticleSs.. S”hi , MACKEY, P.J. “JOM World Nonterrous Smelter MOZO,D.*“Numerically ModeOxilde iEntnraignme nt
S. Kang, J. Lawson, Z. Jia, D. Nikles, J.W. Harrell. Survey, Part II: Nickel: Laterite.” A.E.M. Warner. in the Filling of Castings: The Effect of the Webber
R. Ott, and P. Kadolkar, June, pp. 43-45. C.M. Diaz, A.D. Dalvi, P.J. Mackey, and A.V. Number,” R. Cuesta, A. Delgado, A. Maroto, and D.
LEE, P.D. “Microporosity Formation during the Tarasov, April. pp. 11-20. Mozo, November, pp. 62-65.
Solidificationo f Aluminum-Copper Alloys” (JOM- MACRAE, A. “S-Furnace Root Modifications at MURPHY, K.S. “Ruthenium-Containing Bond Coats
e), P.D. Lee, J. Wang, and R.C. Atwood, December. Xstrata Copper, Timmins, Canada,” A. MacRae and for Thermal Barrier Coating Systems.” B. Tryon,
www.tms.org/pubs/journals/JOM/061 2/Lee/Lee- J. Lenz, October, pp. 56-58 F. Cao, K.S. Murphy, C.G. Levi, and T.M. Pollock,
0612.htmil. MANN, V.C. “The Use of a Dynamic Aluminum Cell January, pp. 53-59.
LENZ, J. “S-Furnace Roof Modifications at Xstrata Model,” T.V. Piskazhova and V.C. Mann, February. MURR, L.E. “Biological Issues in Materials Science
Copper. Timmins, Canada.” A. MacRaaned J.L enz. pp. 48-52. and Engineering: Interdisciplinarity and the Bio-
October, pp. 56-58. MANZOORI, A. “A Correlation-Based Model for Materials Pardigm,” L.E. Murr, July, pp. 23-33: www.
LEVI, C.G. “Ruthenium-Containing Bond Coats for Predicting Gas Extraction Performance in a Copper tms.org/pubs/journals/jon/0607/murr-0h6i0m7.
Thermal Barrier Coating Systems.” B. Tryon, F. Converting Plant.” C.B. Solnordal, PJ. Witt, A. MURTUZA,M. “The Root Cause of Black Pad Failure
Cao, K.S. Murphy, C.G. Levi, and T.M. Pollock. Manzoori, H. Namavari, E. Niknejad, and M. Davari, of Solder Joints with Electroless Ni/ImmersioGonl d
January, pp. 53-59 October, pp. 51-55. Plating.” K. Zeng, R. Stierman, D. Abbott, and M.
LEWIS, A.C. “Quantitative Analysis and Feature MAROOTHYNADEN, J. “The Effect of Micro- Murtuza, June, pp. 75-79.
Recognitioni n 3-D Microstructural Data Sets.” A.C. Gravity and Bioactive Surfaces on the Mineralization MYERS, D.L. “Predicting Oxide Stability in
Lewis,C . Suh, M. Stukowski, A.B. Geltmacher,G . of Bone.” J. Maroothynaden and L.L. Hench, July, High-Temperature Water Vapor.” E.J. Opila, N.S.
Spanos, and K. Rajan, December, pp. 52 56. pp. 57-63. Jacobson, D.L. Myers, and E.H. Copland, January,
LEWIS, D. “SolidiDfetieccts aRetviisitoedn a nd Semi- MAROTO, A. “Numerically Modeling Oxide pp. 2I2I _IQ
Solid Processing.” D. Lewis, June, p. 12 Entrainment in the Filling of Castings: The Effect
LEYENS, C. “Recent Progress in the Coating of the Webber Number,” R. Cuesta, A. Delgado, A.
Protection of Gamma Titanium-Aluminides.” C. Maroto, and D. Mozo, November, pp. 62-65
Leyens, P.Eh. Hovsepian, R. Brauannd ,M. Frohlich, McCOY, S. “Flash-Assist RTP for Ultra-Shallow NAFISI, S. “The Microstructural Characterization of
January, pp. 17-21. www.tms.org/pubs/journals/ Junctions.” D.M.Camm, J.C. Gelpey. T. Thrum, G.C. Semi-Solid Slurries.” S. Nafisi and R. Ghomashchi,
jom/060I/evens-0601 tml. Stuart, and §. McCoy, June, pp. 32-34. June, pp. 24-30.
LI, J. “The Focused-lon-Beam Microscopy—More McVEIGH, C. “The 3-D Computational Modeling NAGLE, M. “The Carbothermic Routet oM agnesium,”
than a Precision lon Milling Machine.” J. Li, March. of Shear-Dominated Ductile Failure in Steel.” F.J G. Brooks, S. Trang, P. Witt. M.N.H. Khan, and M.
pp. 27-31. Vernerey, C. McVeigh, W.K. Liu, B. Moran, D. Nagle, May, pp. 51-55.
LI, J.“ The Industrial Applicationo f Advanced Electron Tewari, D.M. Parks, and G.B. Olson, December, NAMAVARI, H. “A Correlation-Based Model for
Microscopy.” J. Li, March, p. 19. pp. 45-51. Predicting Gas Extraction Performance in a Copper
LI, M. “Virtual Aluminum Castings: An Industrial McWILLIAMS, B. “The Modeling of Electric- Converting Plant.” C.B. Solnordal, P.J. Witt, A.
Application of ICME,” J.E. Allison, M. Li, C. Current-Assisted Sintering to Produce Bulk Manzoori,H .N amavari,E .N iknejada,n d M. Davari,
Wolverton, and X.-M. Su, November, pp. 28-35. Nanocrystalline Tungsten.” B. McWilliams, A October, pp. 51-55.
www.tms.org/pubs/journals/jom/061 I/allison Zavaliangos, K.C. Cho, and R.J. Dowding, April, NARAYAN, R.J. “The Use of Functionally Gradient
0611 html. pp. 67-71. Materials in Medicine.” R.J. Narayan, L.W. Hobbs,
LIN, A.Y.M. “Structural Biological Composites: An MEYERS, M. “Biological Materials Science in the C. Jin, and A. Rabiei, July, pp. 52-56.
Overview.” M.A. Meyers, A.Y.M. Lin. Y. Seki. P.-Y. TMS World.” A. Hodge and M. Meyers, July, pp NEFF, D. “Expanding the Cobalt Recovery Circuit at
Chen, B.K. Kad, and S. Bodde, July, pp. 35-41 20-22 the Thompson Nickel Refinery,” P. Jebbink, R. Stefan,
LINVILLE, E.S. “An Investigation of Phase MEYERS, M.A. “The Deformation Physics of D. Neff, and M. Tomlinson, October, pp. 37-42.
Transformation Behavior in Sputter-Deposited Nanocrystalline Metals: ExperimAenanlytsiss, ,a nd NEWBERY, A.P. “Multi-Scale Al 5083 for Military
PtMn Thin Films,” C.-X. Ji, P.F. Ladwig, R.D. Ott. Computations,” M.A. Meyers, A. Mishra, and D.J. Vehicles with Improved PerformancA.eP,. ” Newbery,
Y. Yang, J.J. Yang.Y .A. Chang. E.S. LinvilJl.e Ga.o . Benson, April, pp. 41-48. S.R. Nutt, and E.J. Lavernia, April, pp. 56-61.
and B.B. Pant, June. pp. 50-54. MEYERS, M.A. “Structural Biological Composites: NGUYEN, V. “The Design Modification and
LIU, J.P. “The Pulse-Thermal Processing of NdFeB- An OverM.Av. Mieyeres, wA.Y,.M. ”Lin , Y. Seki, P.- Optimization of an Ingot Casting Wheel Using
Based Nanocomposite Magnets.” Z7.Q. Jin, V.M. Y. Chen, B.K. Kad. and S. Bodde, July, pp. 35-41. SPH” (JOM-e: Research Summary), M. Prakash,
Chakka, Z.L. Wang, J.P. Liu, P. Kadolkar, and R.D. MILLER, M. “The Material Optimization and P.W. CleaJ.r Grayndf,iel d, P. Rohan, and V. Nguyen,
Ott, June, pp. 46-49. Reliability Characterization of an Indium-Solder December, www.tms.org/pubs/journals/JOM/0162 /
LIU, P. “The Material Optimization and Reliability Thermal Interface Material for CPU Packaging,”C . Prakash/Prakash-0612.html.
Characterization of an Indium-Solder Thermal Deppisch,T . Fitzgerald, A. Raman, F. Hua.C . Zhang, NIKLES, D. “Pulsed-Thermal Processing of
Interface Material forCPU Packaging.”C . Deppisch, P. Liu, and M. Miller, June, pp. 67-74. Chemically Synthesized FePt Nanoparticles,” S. Shi,
T. Fitzgerald, A. Raman, F. Hua, C. Zhang, P. Liu, MISHRA, A. “The Deformation Physics of S. Kang, J. Lawson, Z. Jia, D. Nikles, J.W. Harrell,
and M. Miller, June, pp. 67-74. Nanocrystalline Metals: Experiments, Analysis, and R. Ott, and P. Kadolkar, June, pp. 43-45.
LIU, W.K. “The 3-D Computational Modeling of Shear- Computations,” M.A. Meyers, A. Mishra, and D.J. NIKNEJAD, E. “A Correlation-Based Model for
Dominated Ductile Failure in Steel,” F.J. Vernerey, Benson, April, pp. 41-48. Predicting Gas Extraction Performance in a Copper
C. McVeigh, W.K. Liu, B. Moran, D. Tewari, D.M. MISHRA, B.“TMS Strategic Planning: A Journey and Converting Plant,” C.B. Solnordal, P.J. Witt, A.
60 JOM ¢ December 2006
Manzoori, H. Namavari, E. Niknejad, and M. Davari, Castings.” M. Santella, A. Frederick, C. Degen, and September, pp. 40-44
October, pp. 51-55. r.-Y. Pan, May, pp. 56-61. RAMIREZ, J. “About the Pre-Hispanic Au-Pt
NOGUEZ, M. “About the Pre-Hispanic Au-Pt PANT, B.B. “An Investigationo f Phase Transformation “Sintering” Technique for Making Alloys.” M
“Sintering” Technique for Making Alloys,” M. Behavior in Sputter-Deposited PtMn Thin Films.” Noguez, R. Garcia, G. Salas, T. Robert. and J
Noguez, R. Garcia, G. Salas, T. Robert, and J. C.-X. Ji, PF. Ladwig, R.D. Ott, Y. Yang. J.J. Yang, Ramirez, May, pp. 38-43.
Ramirez, May, pp. 38-43. Y.A. Chang, E.S. Linville, J. Gao, and B.B. Pant, RAMIREZ, J. “The Sacred in Mesoamerican
NOGUEZ, M. “The Sacred in Mesoamerican June, pp. 50-54 Materials.” G. Salas, J. Ramirez, and M. Noguez,
Materials.” G. Salas, J. Ramirez, and M. Noguez. PARK, S. “Enhancing Osseointegration Using May, pp. 44-47.
May, pp. 44-47. Surface-Modified Titanium Implants.” Y. Yang. N. RARDON, D.E. “The Commercialization of
NORGATE, T. “The Potential Applications for Oh, Y. Liu, W.C hen, S. Oh, M. Appleford, S. Kim, Nanomaterials: Today and Tomorrow.” T.M. Osman,
Titanium Metal Powder and Their Life Cycle K. Kim, S. Park, J. Bumgardner, W. Haggard, and D.E. Rardon, L.B. Friedman, and L.F. Vega, April,
Impacts,” T.E. Norgate and G. Wellwood, September, J. Ong, July, pp. 71-76. pp. 21-24: www.tms.org/pubs/journals/JOM/0604,
pp. 58-63. PARKS, D.M. “The 3-D Computational Modeling Osman-0604.html
NUTT,S.R.“Multi-ScAall 50e8 3 for Military Vehicles of Shear-Dominated Ductile Failure in Steel.” FJ. RAWN, C.J. “Deformaatnid Pohnas e Transformations
with Improved Performance.” A.P. Newbery, S.R. Vernerey, C. MeVeigh, W.K. Liu, B. Moran, D duritnheg C yclic Oxidationo f Ni-Al and Ni-Pt-Al.”
Nutt, and E.J. Lavernia, April. pp. 56-61. Tewari, D.M. Parks. and G.B. Olson, December. B.A. Pint.S .A. Speakman, C.J. Rawn, and Y. Zhang,
pp. 45-51 January, pp. 47-52.
PATEL, S.J. “A Century of Discoveries. Inventors, REDDY, R.G. “The Processing of Nanopowders by
and New Nickel Alloys,” S.J. Patel, September. Thermal Plasma Technology.” L. Tong and R.G
OH, N. “Enhancing Osseointegration Using Surface- pp. 1820 Reddy, April. pp. 62-66.
Modified Titanium Implants.” Y. Yang, N. Oh, Y. PHELAN, D. “In-situ Observations of Phase REED, R.C. “The Oxidation of Single-CrysNitcakell -
Liu, W. Chen, S. Oh, M. Appleford, S. Kim, K. Transformations in Titanium,” D. Phelan, M. Based Superalloys.” A. Akhtar, S. Hegde, and R.C
Kim. S. Park, J. Bumgardner, W. Haggard, and J. Reid, N. Stanford, and R. Dippenaar, September, Reed, January, pp. 37-42
Ong, July, pp. 71-76. pp 67-69 REED, R.C. “Superalloys and Coatings for High-
OH, S. “The Characterization and Development of PHELPS, H.R. “Titanium Investment Casting Defects Temperature Applications.” R.C. Reed, January,
Bioactive Hydroxyapatite Coatings.” J.L. Ong, A Metallographic Overview.” J.D. Cotton. L.P. Clark. D. 36
M. Appleford, S. Oh, Y. Yang, W.-H. Chen, J.D. and H.R. Phelps, June, pp. 13-16 REHREN, Th. “The Use of Metal Threads and
Bumgardner, and W.O. Haggard, July, pp. 67-69 PINT, B.A. “Deformation and Phase Transformations Decorations in Byzantine-Greek Orthodox
OH, S. “Enhancing Osseointegration Using Surface during the Cyclic Oxidationo f Ni-Al and Ni-Pt-Al” Ecclesiastical Textiles.” A.Karatzanaind Th. Rehren,
Modified Titanium Implants,” Y. Yang, N. Oh, Y. B.A. Pint, S.A. Speakman, C.J. Rawn, and Y. Zhang, May. pp. 34-37
Liu, W. Chen, S. Oh, M. Appleford, S. Kim, K. January, pp. 47-52 REID, M. “In-situ Observations of Phase
Kim, S. Park. J. Bumgardner, W. Haggard, and J PISKAZHOVA, T.V. “The Use of a Dynamic Transformations in Titanium.” D. Phelan. M
Ong, July, pp. 71-76 Aluminum Cell Model,” T.V. Piskazhova and V.C. Reid, N. Stanford, and R. Dippenaar, September.
OLSON, G.B. “The 3-D Computational Modeling Mann, February, pp. 48-52. pp 67-69.
of Shear-Dominated Ductile Failure in Steel.” FJ. PIZZO, P.P. “Letter to the Editor.” P.P. Pizzo, June. REILLY, J.J. “Metal Hydrides for Vehicular
Vernerey. C. McVeigh, W.K. Liu, B. Moran, D. p. 4. Applications: The State of the Art.” D. Chandra. J.J.
Tewari, D.M. Parks, and G.B. Olson, December, POIRIER,G . “The X-Ray Tomography of a Siliceous Reilly, and R. Chellappa, February, pp. 26-32.
pp. 45-51 Silver Ore.” T.T. Chen, A. Sasov, J.E. Dutrizac, P. ROBERT, T. “About the Pre-Hispanic Au-Pt
ONG, J.L. “The Characterization and Development Kondos, andG . Poirier, March, pp. 41-44 “Sintering” Technique for Making Alloys.” M
of Bioactive Hydroxyapatite Coatings.” J.L. Ong. POLLARD,R. “PEM Fuel Cells: Status and Challenges Noguez, R. Garcia, G. Salas. T. Robert, and J.
M. Appletord, S. Oh, Y. Yang. W.-H. Chen, J.D. for Commercial Stationary Power Applications,” B Ramirez, May, pp. 38-43
Bumgardner, and W.O. Haggard, July, pp. 67-69 Du.Q .G uo,R . Pollard, D. Rodriguez,C . Smith, and ROBERTSON,K . “Materials Characterization Using
ONG,J. “Enhancing Osseointegration Using Surface- J. Elter, August,p p. 45-59 High-Resolution Scanning-Electron Microscopy and
Modified Titanium Implants.” Y. Yang, N. Oh, Y. POLLOCK, T.M. “Ruthenium-Containing Bond X-Ray Microanalysis,” R. Gauvin, K. Robertson,
Liu, W. Chen, S. Oh, M. Appletord, S. Kim, K Coats for Thermal Barrier Coating Systems,” B P. Horny, A.M. Elwazri, and S. Yue, March, pp
Kim, S. Park, J. Bumgardner, W. Haggard, and J. Iryon, F.C ao, K.S. Murphy, C.G. Levi, and T.M 20-26.
Ong, July, pp. 71-76 Pollock. January, pp. 53-59 ROBINSONJ.,J. “The Editor's Blog from MS&T*06:
OPILA, E.J. “Predicting Oxide Stability in High- PRAKASH, M. “The Design Modification and Some Highlights Drawn trom One Man’s 2.5%
Temperature Water Vapor.” E.J. Opila, N.S Optimizationo f an Ingot Casting Wheel Using SPH™ Solution.” J.J. Robinson, December pp. 11-13
Jacobson, D.L. Myers, and E.H. Copland, January, (JOM-e), M. Prakash, P.W. Cleary, J. Grandfield, ROBINSOJN.J,. IN THE Fina AN sis. J.J. Robinson.
Pp: 9 R P. Rohan, and V. Nguyen, December January, February, April, May, July \ugust,
OSMAN, T.*The Commercializationo fN anomaterials ournals/JOM/0612/Prakash/Prakash- November, December. p. 4: March, June, September
Today and Tomorrow,” T.M. Osman, D.E. Rardon, 0612. html October, p. 2
L.B. Friedman, and L.F. Vega, April, pp. 21-24: PRENGAMAN, R.D. “Lead Alloys for Permanent ROBINSON, J.J. “Introducing the Nominees for
www.my. org/pubs/journals/JOM/0604/Osman Anodiens t he Nonferrous Metals Industry,” A. Felder the Greatest Materials Moments in History.” J.J
0604. html and R.D. Preng iman, October, pp. 28 Robinson, November, pp. 51-55
OTT, R. “High-Density Plasma-Are Heating Studies RODRIGUEZ, D. “PEM Fuel Cells: Status and
of FePt Thin Films,” A. Cole, G.B. Thompson, J.W Challenges for Commercial Stationary Powe1
Harrell, J. Weston, and R. Ott, June. pp. 39-42. Applications.” B. Du. Q. Guo, R. Pollard, D
OTT, R. “An Investigation of Phase Transformation RABIEI, A. “The Use of Functionally Gradient Rodriguez, C. Smith, and August, pp.
Behavior in Sputter-Deposited PtMn Thin Films.” Materials in Medicine.” R.J. Narayan, L.W. Hobbs. 45-59
C.-X. Ji, PF. Ladwig, R.D. Ott, Y. Yang, J.J. Yang. C. Jin, and A. Rabiei, July,p p. 52-56 ROHAN, P. “The Design Modification and Optimization
Y.A. Chang, E.S. Linville, J. Gao, and B.B. Pant, RADACK, D.V. “The Uniform Trade Secrets Act.” of an Ingot Casting Wheel Using SPH” (JOM-e).M
June, pp. 50-54. D.V. Radack, January, p. 72 Prakash, P.W. Cleary. J. Grandfield, P. Rohan, and
OTT, R. “Pulsed-Thermal Processing of Chemically RAJAN, K. “Linking Length Scales via Materials V. Nguyen, December, www.ims.org/pubs/journals
Synthesized FePt Nanoparticles.” S. Shi, S. Kang, Informatics,” Z.-K. Liu, L.-Q. Chen. and K. Rajan, JOM/0612/Prakash/Prakash-0612.htm
J. Lawson, Z. Jia, D. Nikles, JW. Harrell, R. Ott, November,pp . 42-50 ROHATGI, P.K. “Applications of Fly Ash in
and P. Kadolkar, June, pp. 43-45 RAJAN, K. “Quantitative Analysis and Feature Synthesizing Low-Cost MMCs for Automotive and
OTT, R. “Pulse-Thermal Processing for Electronic Recognitioni n 3-D Microstructural Data Sets,” A.C Other Applications.P”. K. Rohatgi.D .W eissan,d N
Applications,” R. Ott, June, p. 31. Lewis, C. Suh, M. Stukowski, A.B. Geltmacher, G Gupta, November, pp. 7!—76
OTT, R. “The Pulse-Thermal Processing of NdFeB Spanos, and K. Rajan, December, pp. 52-56 RONCONE, K. “A Puzzling Collection: Mechanical
Based Nanocomposite Magnets,” Z.Q. Jin, V.M RAMAN, A. “The Material Optimization and Brainteasers Chalanld eEntnertgaine,” K. Roncone,
Chakka, Z.L. Wang, J.P. Liu, P. Kadolkar, and R.D. Reliability Characterization of an Indium-Soldet October. p. 72
Ott. June, pp. 46-49. Phermal Interface Material for CPU Packaging,” C. RONCOK. N“FolElow,ing in Their Footsteps: Tales
Deppisch, T. Fitzgerald, A. Raman, F.H uCa. Z,han g, from Materials Science and Engineering Families.”
P. Liu, and M. Miller, June, pp. 67-74. K. Roncone, February, pp. 22 25: www.tms.ore
RAMESH, K.T. “Nanoengineering Opens a New pubs/journals/JOM/0602/Roncone-0602.html
PAN, T.-Y. “The Use of Friction-Stir Technology to Era for Tungsten As Well.” Q. Wei, K.T. Ramesh, RONCONE, K. “New Technical Committee Sponsors
Modify the Surfaces of AM60B Magnesium Die B.E. Schuster, L.J. Kecskes, and R.J. Dowding, Webcast on Emerging Issues in Intellectual
2006 December ¢ JOM
Property,” K. Roncone, March, p. 88. SENGUPTA, J. “Visualizing Hook and Oscillation February, pp. 42-47.
RONCONE, K.“ Preserving the USS Arizona: Retired Mark Formation in Continuously Cast Ultra-Low STIERMAN,R. “The Root Cauosf Belac k Pad Failure
Engineer Applies Skills to Public Service,” K. Carbon Steel Slabs,” (JOM-e), J. Sengupta and B.G. of Solder Joints with Electroless Ni/Immersion Gold
Roncone, September, p. 80. Thomas, December, www.tms.org/pubs/journals/ Plating.” K. Zeng, R. Stierman, D. Abbott, and M.
RONCONE, K. “Reflections on a Life of Materials JOM/0612/Sengupta/Sengupta-0612.himl. Murtuza, June, pp. 75-79.
Science: Robert Cahn and The Art of Belonging.” SHA, W. “The Evolution of Microstructure during STUART, G.C. “Flash-Assist RTP for Ultra-Shallow
K. Roncone, June, p. 88. the Processing of Gamma Ti-Al Alloys.” W. Sha, Junctions,” D.M.Camm, J.C. Gelpey. T. Thrum,G.C.
RONCONE, K. “Talking with the MS&T°06 September, pp. 64-66. Stuart, and §. McCoy, June, pp. 32-34.
Program Coordinating Committee,” K. Roncone, SHI, S. “Pulsed-Thermal Processing of Chemically STUKM. O“QuanWtitatSive AKnalysIis an,d Fea ture
July, pp. 17-19. Synthesized FePt Nanoparticles,” S. Shi, S. Kang, Recognition in 3-D Microstructural Data Sets,” A.C.
RONCONE, K.“Composites Have Merit: New Boy J. Lawson, Z. Jia, D. Nikles, J.W. Harrell, R. Ott, Lewis, C. Suh, M. Stukowski, A.B. Geltmacher, G.
Scout Badge Focuses on Materials,” K. Roncone, and P. Kadolkar, June, pp. 43-45. Spanos, and K. Rajan, December, pp. 52-56.
November, p. 104. SHOEMAKER, L.E. “A Century of Monel Metal: SU, X.-M. “Virtual Aluminum Castings: An Industrial
1906-2006," L.E. Shoemaker and G.D. Smith, Application of ICME,” J.E. Allison, M. Li, C.
September, pp. 22-26. Wolverton, and X.-M. Su, November, pp. 28-35,
SIDHU,R.S. “Novel Rare-Earth-Containing Lead-Free www.ems.org/pubs/journals/jom/061 I/allison-
SABAU, A. “Numerical Simulation of High-Density Solders with Enhanced Ductility,” M.A. Dudek, R.S. 0611.html.
Plasma-Are Processing of FePt Nanoparticle Films,” Sidhu, and N. Chawla, June, pp. 57-62. SUDBRACK, C.K. “The Use of 3-D Atom-Probe
A.S. Sabau and R.B. Dinwiddie, June, pp. 35-38. SILVERMAN, A.B. “Court Rules on Patentability Tomography to Study Nickel-Based Superalloys,”
SALAS, G. “About the Pre-Hispanic Au-Pt “Sintering” Standards for Composition Ranges,” A.B. Silverman, D.N. Seidman, C.K. Sudbrack, and K.E. Yoon,
Technique for Making Alloys.” M. Noguez, R. February, p. 72. December, pp. 34-39.
Garcia, G. Salas, T. Robert, and J. Ramirez, May, SILVERMAN, A.B. “Patent Infringement—The SUGRUE, M. “Letter to the Editor,” M. Sugrue,
pp. 38-43. Doctrineo f Equivalents Revisited,” A.B.Silverman, June, p. 5.
SALAS,G . “The Sacred in Mesoamerican Materials,” December, p. 72. SUH, C. “Quantitative Analysis and Feature
G. Salas, J. Ramirez, and M. Noguez, May, pp. SILVERMAN, A.B. “The Role of Protective Orders Recognitioni n 3-D MicrostruDactat Suetsr.”a Al.C .
44-47. in Intellectual Property Litigation,” A.B. Silverman, Lewis, C. Suh, M. Stukowski, A.B. Geltmacher, G.
SALIMIJHA.Z “VIacu,um Plasma Spraying: A New May, p. 80. Spanos, and K. Rajan, December, pp. 52-56.
Concept for Manufacturing Ti-6AI-4V Structures.” SILVERMAN, A.B. “Watch What You Say SUH, J.O. “A Synchrotron Radiation X-Ray
H.R. Salimijazi, T. Coyle, and J. Mostaghimi, Appellate Court Clarifies Standards to be Applied Microdiffraction Study on Orientation Relationships
September, pp. 50-56. in Interpreting Technical Patent Claim Language.” between a Cu.Sn. and Cu Substrate in Solder
SANCHO MARTINEZ, J.P. “The Sulfuric Acid A.B. Silverman, April, p. 80. Joints,” J.O. Suh, K.N. Tu, and N. Tamura, June,
Leaching of Bayer Electrofilter Fines: A Practical SINGH GAUR, R.P. “Modern Hydrometallurgical pp. 63-66.
Kinetical Approach,” J.P. Sancho Martinez, E.J. Production Methods for Tungsten,” R.P. Singh Gaur, SULLIVAN, R.A. “Automotive Carbon Fiber:
Ayala, M.P. Garcia Coque, P.B. Fernandez, and September, pp. 45-49. Opportunities and Challenges.” R.A. Sullivan,
A.D. Costales, August, pp. 58-62. SMIALEK, J.L. “Moisture-Induced Delayed November, pp. 77-79.
SANMT. “TheE Use Lof FriLction-AStir T,echno logy Spallation and Interfacial Hydrogen Embrittlement
to Modify the Surfaces of AM60B Magnesium Die of Alumina Scales,” J.L. Smialek, January. pp.
Castings.” M. Santella, A. Frederick, C. Degen, and 29-35.
T.-Y. Pan, May, pp. 56-61. SMITH, C. “PEM Fuel Cells: Status and Challenges TAMURA, N. “A Synchrotron Radiation X-Ray
SASOV, A. “The X-Ray Tomography of a Siliceous for Commercial Stationary Power Applications,” B. Microdiffraction Study on Orientation Relationships
Silver Ore,” T.T. Chen, A. Sasov, J.E. Dutrizac, P. Du, Q. Guo, R. Pollard, D. Rodriguez, C. Smith, and between a Cu,Sn, and Cu Substrate in Solder
Kondos, and G. Poirier, March, pp. 41-44. J. Elter, August, pp. 45-59. Joints.” J.O. Suh, K.N. “u, and N. Tamura, June,
SATO, A. “The Oxidation Properties of Fourth SMITH, G.D. “A Century of Monel Metal: 1906 pp. 63-66.
Generation Single-Crystal Nickel-Based 2006," L.E. Shoemaker and G.D. Smith, September, TARASOV, A.V. “JOM World Nonferrous Smelter
Superalloys.” K. Kawagishi, H. Harada, A. Sato, pp. 22-26. Survey, Part Il: Nickel: Laterite,” A.E.M. Warner,
A. Sato, and T. Kobayashi, January, pp. 43-46. SMITH, G.D. “Future Trends in Key Nickel Alloy C.M. Diaz, A.D. Dalvi, P.J. Mackey, and A.V.
SATYANARAYANA, K.G. “The Solidification Markets,” G.D. Smith, September, pp. 38-39. larasoy, April, pp. 11-20.
Processing of Metal-Matrix Composites: The SOHN, Y.H. “Changes in Electrochemical Impedance TEWARI, D. “The 3-D Computational Modeling
Rohatgi Symposium,” N. Gupta and K.G. with Microstructural Development in TBCs,” B. of Shear-Dominated Ductile Failure in Steel,” FJ.
Satyanarayana, November, pp. 92-94. Jayaraj, S. Vishweswariah, V.H. Desai, and Y.H. Vernerey, C. McVeigh, W.K. Liu, B. Moran, D.
SCHONING,C . “The Stability of Refractory Oxides Sohn, January, pp. 60-63. Tewari, D.M. Parks, and G.B. Olson, December.
in Sodium-Rich Environments,” C. Schoning and SOLNOC.BR. “AD CorArelaLtion,-Bas ed Model for pp. 45-51
T. Grande, February, pp. 58-61. Predicting Gas Extraction Performance in a Copper THOMAS, B.G. “The Visualization of Defect
SCHUSTER, B.E. “Nanoengineering Opens a New Converting Plant,” C.B. Solnordal, P.J. Witt, A. Formation during Casting Processes” (JOM-e), B.G.
Era for Tungsten As Well,” Q. Wei, K.T. Ramesh, Manzoori, H. Namavari, E. Niknejad, and M. Davari. Phomas and J. Sengupta, December, pp. 16-18: www.
B.E. Schuster, L.J. Keeskes, and R.J. Dowding. October, pp. 51-55. tms.org/pubs/journ1a2 l/Tsh/omJaOs/MT/ho0m6as
September, pp. 40-44 SPANOS, G. “Quantitative Analysis and Feature 0612.html.
SEAL, S. “Surface Design and Effects in Biological Recognition in 3-D Microstructural Data Sets.” A.C. THOMAS, B.G., “Transient Fluid-Flow Phenomena
Environment.” S. Seal and N.B. Dahotre, July, Lewis, C. Suh, M. Stukowski, A.B. Geltmacher, G. in the Continuous-Steel-Slab-Casting Mold and
p. 51. Spanos, and K. Rajan, December, pp. 52-56. Detect Formation.” B.G. Thomas. Q. Yuan. B.
SEAL,S. “The Potential Toxicity of Nanomaterials SPEAKMAN, S.A. “Deformation and Phase Zhaaond, S. P. Vanka, December (JOM-e), www.tms.
The Role of Surfaces,” A.S. Karakoti, L.L. Hench, Transformations during the Cyclic Oxidation of org/pubs/journals/JOM/0612/Thomasll/Thomasll-
and S. Seal, July, pp. 77-82. Ni-Aland Ni-Pt-Al,” B.A. Pint, S.A. SpeakmanC,.J . 0612.htmil.
SEIDMAN, D.N. “The Use of 3-D Atom-Probe Rawn, and Y. Zhang, January, pp. 47-52. THOMAS, B.G. “Visualizing Hook and Oscillation
Tomography to Study Nickel-Based Superalloys.” SPOWARJT. “,Th e 3-D Anaolf Dyiscsontiinusous ly Mark Formation in Continuously Cast Ultra-Low
D.N. Seidman, C.K. Sudbrack, and K.E. Yoon, Reinforced Aluminum Composite Microstructures.” Carbon Steel Slabs,” J. Sengupta and B.G. Thomas,
December, pp. 34-39. J.E. Spowart, December, pp. 29-33. December (JOM-e) www.tms.org/pubs/journals/
SEKI, Y. “Structural Biological Composites: An STANFORD, N. “In-Situ Observations of Phase JOM/0612/Sengupta/Sengupta-0612.html.
Overview,” M.A. MeyerAs.Y ,.M . Lin,Y . Seki, P.-Y. Transformations in Titanium,” D. Phelan, M. THOMPSON, G.B. “High-Density Plasma-Arc
Chen, B.K. Kad, and S. Bodde, July, pp. 35-41. Reid, N. Stanford, and R. Dippenaar, September, Heating Studies of FePt Thin Films,” A. Cole, G.B.
SENN, J.W. “Mg Sheet Metal Forming: Lessons pp. 67-69. Thompson, J.W. Harrell, J. Weston, and R. Ott,
Learned from Deep Drawing Liand Y Solid-Solution STEFAN, R. “Expanding the Cobalt Recovery Circuit June, pp. 39-42.
Alloys.” S.R. Agnew, J.W. Senn, and J.A. Horton, at the Thompson Nickel Refinery,” P. Jebbink, R. THRUM, T. “Flash-Assist RTP for Ultra-Shallow
May, pp. 62-69. Stefan, D. Neff, and M. Tomlinson, October, pp. Junctions,” D.M.J.C.C Gelapey,m T. mThru,m,G. C.
SENGUPTA, J. “The Visualization of Defect 37-42. Stuart, and S. McCoy, June, pp. 32-34.
Formation during Casting Processes” (JOM-e), B.G. STEVENS McFADDEN, F. “The Multivariable TOMLINSON, M. “Expanding the Cobalt Recovery
Thomas and J. Sengupta, December, pp. 16-18; ww. Model-Based Control of the Non-Alumina Circuit atthe Thompson Nickel Refinery.” P. Jebbink,
tms.org/pubs/journals/JOM/06 12/Thomas/Thomas- Electrolyte Variablesi n Aluminum Smelting Cells,” R. Stefan, D. Neff, and M. Tomlinson, October,
0612.html. F. Stevens McFadden, B. Welch, and P.C. Austin, pp. 37-42.
62 JOM ¢ December 2006
TONG, L. “The Processing of Nanopowders by B.T. Fultz, March, p. 46. 50-57.
Thermal Plasma Technology,” L. Tong and R.G. WANG, X.-L. “The Applicationo f Neutron Diffraction ‘ANG, J.J. “An Investigationo f Phase Transformation
Reddy, April, pp. 62-66. to Engineering Problems,” X.-L. Wang, March, Behavior in Sputter-Deposited PtMn Thin Films.”
TRAN“TGhe ,CarSboth.erm ic Route to Magnesium.” yp. 52-57. C.-X. Ji, PF. Ladwig, R.D. Ott, Y. Yang, J.J. Yang,
G. Brooks, S. Trang, P. Witt, M.N.H. Khan, and M. WANG, Z.L. “The Pulse-Thermal Processing of Y.A. Chang, E.S. Linville, J. Gao, and B.B. Pant,
Nagle, May, pp. 51-55. NdFeB-Based Nanocomposite Magnets,” Z.Q. Jin, June, pp. 50-54.
TRYGGVASON, G. “Re-Engineering Engineering V.M. Chakka, Z.L. Wang, J.P. Liu, P. Kadolkar, and ‘ANG, Y. “An Investigation of Phase Transformation
Education forthe Challenges of the 21st Century.” G. R.D. Ott, June, pp. 46-49 Behavior in Sputter-Deposited PtMn Thin Films.”
Tryggvason and D. Apelian, October, pp. 14-17. WARD, P.J. “Flow Visualization for Semi-Solid C.-X. Ji, P.F. Ladwig, R.D. Ott, Y. Yang, J.J. Yang.
TRYON, B. “Ruthenium-Containing Bond Coats for Processing.” H.V. Atkinson and PJ. Ward, June. Y.A. Chang, E.S. Linville, J.G ao, and B.B. Pant,
Thermal Barrier Coating Systems.” B. Tryon, F. pp. 21-23 June, pp. 50-54.
Cao, K.S. Murphy, C.G. Levi, and T.M. Pollock, WARNER, A.E.M. “JOM World Nonferrous Smelter ‘ANG, Y. “Enhancing Osseointegration Using
January, pp. 53-59. Survey, Part III: Nickel: Laterite.” A.E.M. Warner, Surface-Modified Titanium Implants.” Y. Yang, N.
TU, K.N. “A Synchrotron Radiation X-Ray C.M. Diaz, A.D. Dalvi, P.J.M ackeyan,d A.V. Tarasov, Oh, Y. Liu, W. Chen, S. Oh, M. Appleford. S. Kim.
Microdiffraction Study on Orientation Relationships April, pp. 11-20. K. Kim, S. Park, J. Bumgardner, W. Haggard. and
between a Cu,Sn. and Cu Substrate in Solder WEI, D.Y. “ICMatE GE : Acceletrhea Itnseirtniong of J. Ong, July, pp. 71-76
Joints.” J.O. Suh, K.N. Tu, and N. Tamura, June. New Materials and Processes,” D.G. Backman, D.Y. YANG, Y. “The Characterization and Development
pp. 63-66. Wei, D.D. Whitis, M.B. Buczek, P.M. Finnigan, and of Bioactive Hydroxyapatite Coatings,” J.L. Ong,
TURNER, J.A. “The Formation of Protective Nitride D. Gao, November, pp. 36-41. M. Appleford, S. Oh, Y. Yang, W.-H. Chen, J.D.
Surfaces for PEM Fuel Cell Metallic Bipolar Plates.” WEI, Q. “Nanoengineering Opens a New Era for Bumgardner, and W.O. Haggard, July, pp. 67-69
M.P. Brady, B. Yang, H. Wang, J.A. Turner, K.L. Tungsten as Well.” Q. Wei, K.T. Ramesh, B.E. YANG, Z. “Fuel Cells: Status and Challenges in
More, M. Wilson, and F. Garzon, August, pp. SchusterL,. J. Keeskeasn,d R.J. Dowding, September, Materials and Technologies.” Z. Yang, August,
50-57. pp. 40-4. p. 36.
WEIL, K.S. “The State-of-the-Art in Sealing ‘OON, K.E. “The Use of 3-D Atom-Probe Tomography
echnology for Solid Oxide Fuel Cells.” K.S. Weil, to Study Nickel-Based Superalloys,” D.N. Seidman,
August, pp. 37-44 C.K. Sudbrack, and K.E. Yoon, December, pp
UCHIC, M.D.“3-D Microstructural Characterization: WEISS, D. “Applications of Fly Ash in Synthesizing 34-39,
Methods, Analysis, and Applications,” M.D. Uchic, Low-Cost MMCs for Automotive and Other YUAN, Q. “Transient Fluid-Flow Phenomena in the
December, p. 24. Applications,P”. K. RohDa. Wetiss,g andi N., Gup ta, Continuous-Steel-Slab-Casting Mold and Defect
November, pp. 71-76. Formation.” B.G. Thomas, Q. Yuan, B. Zhao,
WELLWOOD, G. “The Potential Applications and §.P. Vanka, December, (JOM-e) www.tms.
for Titanium Metal Powder and Their Life Cycle org/pubs/journals/JOM/06 12/ThomaslI/Thomasll-
VALIEV, R.Z. “Producing Bulk Ultrafine-Grained Impacts,” T.E. Norgate and G. Wellwood, September, 0612.html.
Materials by Severe Plastic Deformation,” R.Z. pp. 58-63. YUE, S. “Materials Characterization Using High-
Valiev, Y. Estrin, Z. Horita, T.G. Langdon, M.J. WELCH, B. “The Multivariable Model-Based Resolution Scanning-Electron Microscopy and
Zehetbauer, and Y.T. Zhu, April, pp. 33-39. Control of the Non-Alumina Electrolyte Variables in X-Ray Microanalysis.” R. Gauvin, K. Robertson,
VANKA, S.P. “Transient Fluid-Flow Phenomena Aluminum Smelting Cells,” F. Stevens McFadden, B. P. Horny, A.M. Elwazri, and S. Yue, March, pp
in the Continuous-Steel-Slab Casting Mold and Welch, and P.C. Austin, February, pp. 42-47. 20-26.
Defect Formation.” B.G. Thomas, Q. Yuan. B. WELTER, J.-M. “Understanding the Copper of the
Zhao, and S.P. Vanka, December (JOM-e) www.tms Statue of Liberty,” J.-M. Welter, May, pp. 30-33.
org/pubs/journals/JOM/06 12/Thomasl/Thomas!I- WESTON, J. “High-Density Plasma-Are Heating
0612.html. Studies of FePt Thin Films,” A. Cole, G.B. ZAVALIANGOS, A. “The Modeling of Electric-
VEGA, L.F."The Commercialization ofN anomaterials: Thompson, J.W. Harrell, J. Weston, and R. Ott, Current-Assisted Sintering to Produce Bulk
Today and Tomorrow,” T.M. Osman, D.E. Rardon, June, pp. 39-42. Nanocrystalline Tungsten,” B. McWilliams, A
L.B. Friedman, and L.F. Vega, April, pp. 21-24: WHIDT.D.I “ICSME ,at GE: Accelertahet Inisenrtgio n Zavaliangos, K.C. Cho, and R.J. Dowding, April,
www.tns.org/pubs/journals/JOM/0604/Osman- of New Materialasn d Processes,D.”G . Backman, D.Y. pp. 67-71.
0604. html. Wei, D.D. Whitis, M.B. Buczek, P.M. Finnigan, and ZEHETBAUER, M.J. “Producing Bulk Ultrafine-
VERNEREY, F.J. “The 3-D Computational Modeling D. Gao, November, pp. 36-41. Grained Materials by Severe Plastic Deformation,”
of Shear-Dominated Ductile Failure in Steel?” FJ. WILSON, D.N. “Beyond Batteries: Other Trends R.Z. Valiev, Y. Estrin, Z. Horita, T.G. Langdon, M_J.
Vernerey, C. McVeigh, W.K. Liu, B. Moran, D. in the Demand for Lead,” D.N. Wilson, October, Zehetbauer, and Y.T. Zhu, April, pp. 33-39
Tewari, D.M. Parks, and G.B. Olson, December, pp. 24-27 ZENG, K. “The Root Cause of Black Pad Failure of
pp. 45-51. WILSON, M. “The Formation of Protective Nitride Solder Joints with Electroless Ni/Immersion Gold
VISHWESWARIAH,S. “Changes in Electrochemical Surfaces for PEM Fuel Cell Metallic Bipolar Plates.” Plating.” K. Zeng. R. Stierman, D. Abbott, and M.
Impedance with Microstructural Development in M.P. BraBd. yYan,g, H.W ang, J.A. TurnK.eL.r M,ore , Murtuza, June, pp. 75-79
IBCs,” B. Jayaraj, S. Vishweswariah, V.H. Desai, M. Wilson, and F. Garzon, August, pp. 50-57. ZHANG, C. “The Material Optimization and Reliability
and Y.H. Sohn, January, pp. 60-63. WITT, P. “The Carbothermic Route to Magnesium.” Characterization of an Indium-Solder Thermal
VISSER, D. “Letter to the Editor,” D. Visser, June, G. Brooks, S. Trang, P. Witt, M.N.H. Khan, and M Interface Material forCPU PackagiC.n Degpp,is”ch. ,
p. 5. Nagle, May, pp. 51-55. T. Fitzgerald, A. Raman, F. Hua, C. Zhang, P. Liu,
WITT, P.J. “A Correlation-Based Model for Predicting and M. Miller, June, pp. 67-74
Gas Extraction Performance in a Copper Converting ZHANG, Y. “Deformatioannd Phase Transformations
Plant.” C.B. Solnordal, P.J. Witt, A. Manzoori, H. during the Cyclic Oxidation of Ni-Al and Ni-Pt-Al”
WAN, K.-T. “Incorporating Solid Mechanics into Namavari, E. Niknejad. and M. Davari, October, B.A. Pint, S.A. Speakman, C.J. Rawn, and Y. Zhang,
Biomedical and Life Sciences,” K.-T. Wan, July, yp. 51-55 January, pp. 47-52.
pp. 42-45. WOLVERTON, C. “Virtual Aluminum Castings: ZHAO, B. “Transient Fluid-Flow Phenomena in the
WANG, H. “The Formation of Protective Nitride An Industrial Application of ICME,” J.E. Allison, Continuous-Steel-Slab-Casting Mold and Defect
Surfaces for PEM Fuel Cell Metallic Bipolar M. Li, C. Wolverton, and X.-M. Su, November, Formation.” B.G. Thomas, Q. Yuan, B. Zhao,
Plates,” M.P. Brady, B. Yang, H.W ang, J.A. Turner, pp. 28-35, www.ms.org/pubs/journals/jom/06 1 1/ and S.P. Vanka, December (JOM-e), www.tms.
K.L. More, M. Wilson, and F. Garzon, August, allison-10 h6t1m l org/pubs/journals/JOM/06 12/Thomasll/ThomasI-
pp. 50-57. WU, M. Modeling Macrosegrweitghaa Mtulitiophnas e 0612.hitml.
WANG, J. “Microporosity Formation during the Approach: Examples and Discussion” (JOM-e), M. ZHU, Y.T. “Nanostructured Materials: From Laboratory
Solidifofi Alcumaintumi-Cooppner Alloys” (JOM- Wu and A. Ludwig, December, www.tms.org/pubs/ to Commercialization,” Y.T. Zhu, April, p. 27
e), P.D. Lee, J. Wang, and R.C. Atwood, December, journals/JOM/0612/Wu/W1u2 -.h0im6il . ZHU, Y.T. “Producing Bulk Ultrafine-GraMaitnereiadl s
www.ims.org/pubs/journals/JOM/|0 6 2/Lee/Lee- by Severe Plastic Deformation,” R.Z. Valiev, Y. Estrin,
0612.himl. Z. Horita, T.G. Langdon, M.J. Zehetbauer, and Y.T.
WANG, S. “Cobalt—Its Recovery, Recycling, and Zhu, April, pp. 33-39
Application,”S . Wang, October, pp.47—50, wwiw.tms. YANG, B. “The Formation of Protective Nitride ZIEBOLD, S. “Increasing the Capacity of High-
org/pubs/journa1OlAsva/ngj-0o6n 1/0.0 h6im . Surfaces for PEM Fuel Cell Metallic Bipolar Efficiency Diffusion Fiber Beds in Smelter Gas
WANG, X.-L. “Neutron Scattering Applied to Plates,” M.P. Brady, B. Yang, H. Wang, J.-A. Turner. Plants.” S. Ziebold and D.E. Azwell, October, pp
Materials Problems,” J.R. Morris, X.-L. Wang, and K.L. More, M. Wilson, and F. Garzon, August, pp. 59-62.
2006 December ¢ JOM