ebook img

JOM 1999: Vol 51 Index PDF

5 Pages·1999·2.3 MB·English
by  
Save to my drive
Quick download
Download
Most books are stored in the elastic cloud where traffic is expensive. For this reason, we have a limit on daily download.

Preview JOM 1999: Vol 51 Index

AUTHOR INDEX TO JOM, VOLUME 51 ie JANUARY—DECEMBER 1999 BISHOP, M “HIP-Clad Products for the Plastics In- dustry” (Oz w), M.F. Bishop and C.K. Nickel, July, pp 32-34. ABKOWITZ, S. “An Excerpt from JOM’s Monograponh t he BRIANT, C.L. “Processing Refractory Metals: The Tradi- DAHOTREN,.B . “Refractory Ceramic-Composite Coatings Emergenceo f Titanium and Ti-6AI-4V” (Feature: Historical tional and the Novel” (Commentary), C.L. Briant, April via Laser Surface Engineering” (Research Summmary), N.B. Insight), S. Abkowitz, June, pp. 14-16 ». 28. Dahotre and A. Agarwal, April, pp. 19-21 AGARWAL, A. “Refractory Ceramic-Composite Coatings BRONSON, A. “Reactive Liquid Processing in Ceramic DALEWSKI, F. “Removing Arsenic from Copper Smelter via Laser Surface Engineering” (Research Summary), N.B Joining” (Commentary), A. Bronson, February, p. 43. Gases” ww), F.D alewski,SS eep tember, pp. 24-26. Dahotre and A. Agarwal, April, pp. 19-21 BUBAN, K.R. “Iron Control in Zinc Pressure Leach Pro- DAVIES, A.L.“The Industrial Separation of Copper and ALLEN, T.R. “Using Fast Reactor Component Iv aluation cesses” (Overview), K.R. Buban, M.J. Collins, and 1M Arseas nSulificdes ” (Overview), P.J.Gabb and A.L. Davies, for Pressurized Water Reactor Life Extension” (Research Masters, December, pp. 23-25 <www.tms.org/pubs September, pp. 18-19 Summary), T.R. Allen, J.I. Cole, E.A. Kenik, H. TsaSi. U,ka i journals /JOM/9912/Buban-9912.htmI>. DAVIES, R.W. “Characterizing Al Tailor-Welded Blanks _ S. Mizutaa,n d T. Yoshitake, October, pp. 27-30 BUISMAN, C.J.N. “Biologically Removing Sulfur from Di- for Automotive Applications” (Overview), R.W. Davies, ARNASON, B. “Converting CO, Emissions and Hydrogen lute Gas Flows” (Overview), R. Ruitenberg, H. Dijkman, H.E. Oliver, M.T. Smith, and G.J. Grant, November, pp. into Methanol Vehicle Fuel” (Overview), B. Arnason and and C.J.N. Buisman, May, p. 45. 46-50 T.1. Sigfisson, May, pp. 46-47. BUNCE, G.M. “Plasma-Based Processes for Waste Vitrifica- DEAKIN, J. “A Water-Cooled Hood System for Peirce- ATKINSON, K.J.W. “Predicting Microstructure from Ato- tion” (Commentary), P.R. Taylor and G.M. Bunce, October, Smith Converters and Similar Furnace Vessels” (Over- mistic Rule Set Cellular Automata” (JOM-e: Overview), p. 13. view), W. Drummond and J. Deakin, May, pp. 40-41. K.J.W. Atkinson, R.W. Grimes, M.O. Zacate, P.D. Lee, A.G BUNCE, G.M. “Using a Plasma-Fired Cyclone Reactor for DEMOPOULOS, G.P. “The Separation and Concentration Jackson, and S.R. LeClair, August <www.tms.org/ pubs Calcining and Vitrifying Radioactive Wastes” (Applied of Iron from Zinc Process Solutions” (Overview), F.T. journals /JOM/9908/ Atkinson /A tkinson-9908.htmI>. Technology), G.M. Bunce, P.R. Taylor, and S.G. Roden, Principe and G.P. Demopoulos, December, pp. 34-35. October, pp. 22-24. DIJKMAN, H. “Biologically Removing Sulfur from Dilute BUTZER, G.A. “Production-Scale Spray Formingo f Super- Gas Flows” (Overview), R. Ruitenberg, H. Dijkman, and alloys for Aerospace Applications” (JOM-e: Industrial In C.J.N. Buisman, May, p. 45 BAHTISHL,N . “Everything You Need to Know about Being sight),G.A. Butzer, April <www.tms.org/pubs/journals DOHERTY, C. “Nails from a 2,400 Year Old Shipwreck: A a Manager but Never Learned in College” (JOM-e: Over- JOM /9904/Butzer /Butzer-9904.html>. Study of Copper in a Marine Archaeological Environ- ew), N. Bahtishi, June <www.tms.org /pubs/journals ment” (Feature: Archaeotechnology), S. Shalev, Y.K ahanov, JOM /9906 / Bahtishi /B ahtishi-9906.htmi and C. Doherty, Februaryp,p . 14-17. BARAKAT, M.A. “Recovering Metal Values Hydro- DRUMMOND, W. “A Water-Cooled Hood System for metallurgically from Spent Dry Battery Cells” (Research CAI, C. “Recent Developments in the Thermomechanical Peirce -Smith Converters and Similar Furnace Vessels” Summary), M.A. Rabah, M.A. Barakat, and Y.Sh. Mahrous, Fatigue Life Prediction of Superal(JlOMo-ey: s” Overview), (Overview), W. Drummond andJ . Deakin, May, pp. 40-41 December, pp. 41-43 C. Cai, P.K. Liaw, M. Ye, and J. Yu, April <www.tms.org DU BE, W.P. “ Monitorintghe Solidification of Single-Crystal BARBER, J.P. “Full-Density Net-Shape Powder Consolida- pubs journals JOM /9904/Cai/Cai-9904.html>. Castings Using High- E nergy X-Ray Diffraction” (JOM-e: tion Using Dynamic Magnetic Pulse Pressures” (Over CAMPBELL, F. “The Scale-up and Design of Pressure Hy- Research Summary), D.W. Fitting, W.P. Dubé, and T.A. view), B. Chelluri and J.P. Barber, July pp. 36-37. drometallurgical Process Plants” (Fra7 Historical In- Siewert, July <www.tms.org pubs journals /JOM/9907/ BARTON-JONES, I. “Pressure Leaching Las Cruces Cop- sight), F. Campbell, W.D. Vardill, and L. Trytten, Se ptem- Fitting /F itting-9907.htm|> per Ore” (Research Summary), R.M. Berezowsky, T. Xue, ber, pp. 12-15. DUNCANJ,.L . “Sheet Metal Forming: A Review” (Tutorial), M.J. Collins, M. Makwana, I. Barton-Jones, M. Southgate, CARRANZA, F. “Recycling EAF Dust Leaching Residue to W.F. Hosford and J.L. Duncan, November, pp. 39-44 and J.K. MacLean, December, pp. 36-40. the Furnace: A Simulation Study” (Research Summary), | <www.tms.org/pubs/journals/JOM/9911/Hosford- BASU, A.K. “The CMSF Process: The Spray Forming of ee R. Romero,N . Iglesiasa,nd F. Carranza, August, 9911.html>. Clean Metal” (JOM-e: Overview), W.T. Carter, Jr., M.G. pp. 28- DUTRIZAC, J.E. “The Effectiveness of Jarosite Species for Benz, A.K. Basu, R.J. Zabala, B.A. Knudsen, R.M. Forbes CARTER, W. T. Jr. ‘The CMSF Process: The Spray Forming Precipitating Sodium Jarosite” (Research Summary), J.E. Jones, H.E. Lippard, and R.L. Kennedy, April of Clean Metal” (JOM-e: Overview), W.T. Carter, Jr., M.G Dutrizac, December, pp. 30-32. www.tms.org/pubs/journals/JOM/9904/Carter Benz, A.K. Basu, R.J. Zabala, B.A. Knudsen, R.M. Forbes Carter-9904.html> Jones, H.E. Lippard, and R.L. Kennedy, April BEACH, D.B. “Using RABiTS to Fabricate High-Tempera- <www.tms.org/pubs/journals/JOM/9904/Carter ture Superconducting Wire” (Overview), A. Goyal, R Carter-9904.html> EDDY, T.L. “Treating Waste with PAM” (Overview), T.L. Feenstra, F Paranthaman, D.F. Lee, D.M. CHANG, Y.A. Letrers 1 EE R, Y.A. Chang, Nov., p 2 Eddy, October, pp- 20-21 Kroeger, D.B a |.S. Morrell, T.G. Chirayil, D.T CHAWLA, N. “The Fracture Toughness and Fatigue Behav- EDWARDS, G.R. “Ceramic-Metal Interfaceasnd the Spread- Verebelyi, X. Cui, E.D. Specht, D.K. Christen, and P.M. ior of DRA” (Research Summary), A.B. Pandey and N ing of Reactive Liquids” (Overview), A. Meier, D.A. Martin, July, pp. 19-23 Chawla, November, pp. 69-72 Javernick, and G.R. Edwards, February, pp. 44-47. BEARNE, G.P. “The eee ofg es Reduction CHELLURIL, B. “Full-Density, Net-Shape Powder Consoli- ENSZ, M. “Investigating Solidification with the Laser-Engi- Cell Process Control” (Overview), G.P. Bearne, May, pp dation Using Dynamic Magnetic Pulse Pressures” (Over neered Net Shaping (LENS™) Process” (JOM-e: Overview), w), B. Chelluri and J.P. Barber, July, pp. 36-37. W. Hofmeister, M. Wert, J. Smugeresky, J.A. Philliber, M. BEAZLEY, T.M. “Abating Greenhouse Gas Emissions in 1, E.Z. “The ABCs of Scientific Presentations” (F: Griffith, and M. Ensz, July <www.tms.org/pubs/ Metallurgaincd aMalt erials Processing” (F N Thing Professional Affairs), E.Z. Chen, December, pp. 16-18 journals /JOM/9907 /H ofmeister / Hofmeister-9907.htmI>. Other), T.M. Beazlev, May, p. 56 CHIRAYIL, T.G. “Using RABiTS to Fabricate High-Tem- BEAZLEY, T.M. “Educators Lead Increases in 1998 U.S perature Superconducting Wire” (Overview), A. Goyal, R. Engineering Phra (F Professiona fairs), T.M Feenstra, F.A. List, M. Paranthaman, D.F. Lee, D.M. Beazley, March, pp. 10-11 Kroeger, D.B. Beach, J.S. Morrell, T.G. Chirayil, D.T. FALLER, K. “Using Ti-5111 for Marine Fastener Applica- BEAZLEY, T.M. “The Horse-Tha at-N ever-r -We is Makes Tri- Verebelyi, X. Cui, E - Specht, D.K. Christen, and P.M. tions” (Overview), J. Been and K. Faller, June, pp. 21-24 umphant Return to Milan” (END N Things Other), T.M Martin, July, pp. 19-23 FANG, Y. “Observing and Measuring Solidification Phe- Beazley, September, p. 48 CHO, T. “Low Dielectric Constant Materials for Advanced nomena at High Temperatures” (JOM-e: Overview), C. BEAZLEY, T.M. “NIST Web Site Provides P: rog ram Infor- Interconnects” (Overview), M. Morgen, E.T. Ryan, J.-H Orrling, Y. Fang,N . Phinichka,S. Sridhar,and A.W.Cramb, mation and Much More” (fF N Net Trans), T.M. Zhao,C . Hu, T. Cho, and P.S. Ho, September, pp. 37-40 July <www.tms.org /p ubs /journals /JOM /9907 /Orrling/ Beazley, March, p. 48 CHRISTEN, D.K. “Using RABiTS to Fabricate High-Tem- Orrling-9907.html> BEAZLEY, T.M. “REWAS Serves as a ‘Model’ for TMS perature Superconducting Wire” (Overview), A.G oyal, R FATTINGER, V. “A Sulfuric-Acid Process with Near-Zero Internati nalI nitiatives (S rto”“REWAS "99: The TMS Feenstra, F.A. List, M. Paranthaman, D.F. Lee, D.M SO, Gas Emissions” (Overview), W. Jaeger, V. Fattinger, T. Fall E actior ess Metallurgy Meeting), T.M. Beazley Kroeger, D.B. Beach, J.S. Morrell, T.G. Chirayil, D.T Keilpart, and H.-J. Hamel, May, pp. 42-43. December, p. 2 Verebelyi, X. Cui, E.D. Specht, D.K. Christen, and P.M FECHT, H. “Ni-Based Superalloysfo r Turbine Discs” (Over- BECKER, M. | M. Becker, August, p. 2 Martin, July, pp. 19-23 view), D. Furrer and H. Fecht, January, pp. 14-17. BECKER, M.N. “Aluminum: New Challenges in Down- COLE, J.I. “Using Fast Reactor Component Evaluation for FEENSTRA, R. “Using RABiTS to Fabricate High-Tempera- stream Activities” (O: v), M.N. Becker, November Pressurized Water Reactor Life Extension” (Research Sum- ture Supe srconducting Wire” (Overview), A. Goyal, R. mary), T.R. Allen, J.1. Cole, E.A. Kenik, H. Tsai, S. Ukai, S Feenstra, F.A. List, M. Paranthaman, D.F. Lee, D.M. for Marine Fastener Applications” Mizuta, and T. Yoshitake, October, pp. 27-30. Kroeger, D.B. Beach, J.S. Morrell, T.G. Chirayil, D.T. 4 K. Faller, June, pp. 21-24 COLLINS, M.J. “Iron Control in Zinc Pressure Leach Pro- Verebelyi, X. Cui, E.D. Specht, D.K. Christen, and P.M. BENEDICT, M. D. Discrete Modeling via Function Ap- cesses” (Overview), K.R. Buban, M.J. Collins, and I.M Martin, July, pp. 19-23. proximation Methods: ging Atomic- and Microscales Masters, December, pp. 23-25 <www.tms.org /p ubs /jour- FILIPOVICH, LK. “Integrating Coal Combustion and Red JOM-e: Overvie A.G. Jackson and M.D. Benedict, Au- nals/JOM/9912/Buban-9912.html>. Mud Sintering at an Alumina Refinery” (Overview), gust<www.tms.org s/journals /JOM /9908 /J ackson COLLINS, M.J. “Pressure Leaching Las Cruces Copper Rayzman and LK. Filipovich, August, pp. 16-18. Jackson-990h8t.m ! Ore” (Research Summary), R.M. Berezowsky, T. Xue, M.] FITTING, D.W. “Monitoring the Solidification of Single- BENZ, M.G. “The CMSF Process: The Spray Forming of Collins, M.M akwana, I. Barton-Jones, M. Southgate, and Crystal Castings Using High-Energy X-Ray Diffraction” Clean Metal” (JOM-e: Over ), W.T. Carter, Jr., M.G J.K. MacLean, December, pp. 36-40. (JOM-e: Research Summary), D.W. Fitting, W.P. Dubé, and Benz, A K Basu, R.J. Zabala, B.A. Knudsen, R.M. Forbes COLVIN, G. “Vacuum-Die Casting Titanium for Aerospace r.A. Siewert, July <www.tms.org/pubs/journals/JOM/ Jones i I ij, and R.L. Kennedy, April and Commercial € ompone nts” (Overview), D. Larsen and 9907 / Fitting /F itting-9907.html> journals /JOM/9904/ Carter G. Colvin, June, pp. 26-27. FORBES JONES, R.M. “The CMSF Process: The Spray Form- Carter- COOPER, K.P. “Producing Net-Shape Products by Powder ing of Clean Metal” (JOM-e: Overview), W.T. Carter, Jr., BE — RG, B.R ev ew of the book Mani Metallurgy” (Commentary), K.P. Cooper, July, p. 25 M.G. Benz, A.K. Basu, R.J. Zabala, B.A. Knudsen, R.M. CRAMB, A.W. “Observing and Measuring Solidification Forbes Jones, H.E. Lippard, and R.L. Kennedy, April E ‘Re ews), B Berenberg November, Phenomena at High Temperatures” (JOM-e: 02 erview), C <www.tms.org /pubs/journals/JOM/9904/Carter / BEREZOWSKY, R.M. “Pressure Leaching Las Cruces C op- Orrling, Y. Fang, N. Phinichka,S. Sridhar,and A.W.Cramb, Carter-9904.html> per Ore” (Resea ), R.M. Berezowsky, T. Xue. July <www.tms.org/pubs/journals /JOM /9907 /Orrling FORBES JONES, R.M. “The Structural Evolution of Super- M.J. Collins, M.M akwana, I. Barton-Jones, M. Southgate Orrling-9907.html> alloy Ingots during Hot Working” (Overview), R.M. Forbes and J.K. MacLean, December, pp. 36-40 CRONIN, W. “A Metallurgical Assessment of SnPbAg Sol- Jones and L.A. Jackman, January, pp. 27-31 BEWLAY, B.P. “Processing High-Temperature Refractory- der for GaAs Power Devices” (Research Summary), J.M <www.tms.org/pubs/journals/JOM/9901 /ForbesJones- Metal Silicide In-Situ Composites” (Overvier ), B.P. Bewlay Parsey, Jr., S. Valocchi, W. Cronin, J. Mohr, B.L. Scrivner, 9901.html> M.R. Jackson, and P.R. Subramanian, April, pp. 32-36. and K. Kyler, March, pp. 28-31 FRAY, D.J. “Remov ing Impurities from Steel Scrap Using BHATKAL, R.M. “The Technical Cost Modeling of Near- CUL, X. “Using RABiTS to Fabricate High-Temperature Su- Air and Chlorine Mixtures” (Research Summary), J.K.S. Tee Net-Shape P MManufa (Overview), R.M. Bhatkal perconducting Wire” (Overview), A. Goyal, R. Feenstra, and DJ. Fray, \ugust, pp. 24- and T. Hannibal, July, pp.2 F.A. List, M. Paranthaman, D.F. Lee, D.M. Kroeger, D.B. FRAZIER, W.G. “Holistic Strate gies for Designing Multi- BIELER, T.R. Miceoiaes ictural ¥ volution during the Hot Beach, J.S. Morrell, T.G. Chirayil, D.T. Verebelyi, X stage Materials Processes” (Overview), W.G. Frazier and Working of Superalloys’ (Commentary), S.L. Semiatin and Cui, E.D. Specht, D.K. Christen, and P.M. Martin, July, pp E.A. Medina, September <www.tms.org /pubs/journals/ TR. Bieler, January, p 19-23 JOM /9909 / Frazier /F razier-9909.html>. 44 JOM ¢ December 1999 AUTHOR INDEX TO JOM, VOLUME 51 ie JANUARY—DECEMBER 1999 BISHOP, M “HIP-Clad Products for the Plastics In- dustry” (Oz w), M.F. Bishop and C.K. Nickel, July, pp 32-34. ABKOWITZ, S. “An Excerpt from JOM’s Monograponh t he BRIANT, C.L. “Processing Refractory Metals: The Tradi- DAHOTREN,.B . “Refractory Ceramic-Composite Coatings Emergenceo f Titanium and Ti-6AI-4V” (Feature: Historical tional and the Novel” (Commentary), C.L. Briant, April via Laser Surface Engineering” (Research Summmary), N.B. Insight), S. Abkowitz, June, pp. 14-16 ». 28. Dahotre and A. Agarwal, April, pp. 19-21 AGARWAL, A. “Refractory Ceramic-Composite Coatings BRONSON, A. “Reactive Liquid Processing in Ceramic DALEWSKI, F. “Removing Arsenic from Copper Smelter via Laser Surface Engineering” (Research Summary), N.B Joining” (Commentary), A. Bronson, February, p. 43. Gases” ww), F.D alewski,SS eep tember, pp. 24-26. Dahotre and A. Agarwal, April, pp. 19-21 BUBAN, K.R. “Iron Control in Zinc Pressure Leach Pro- DAVIES, A.L.“The Industrial Separation of Copper and ALLEN, T.R. “Using Fast Reactor Component Iv aluation cesses” (Overview), K.R. Buban, M.J. Collins, and 1M Arseas nSulificdes ” (Overview), P.J.Gabb and A.L. Davies, for Pressurized Water Reactor Life Extension” (Research Masters, December, pp. 23-25 <www.tms.org/pubs September, pp. 18-19 Summary), T.R. Allen, J.I. Cole, E.A. Kenik, H. TsaSi. U,ka i journals /JOM/9912/Buban-9912.htmI>. DAVIES, R.W. “Characterizing Al Tailor-Welded Blanks _ S. Mizutaa,n d T. Yoshitake, October, pp. 27-30 BUISMAN, C.J.N. “Biologically Removing Sulfur from Di- for Automotive Applications” (Overview), R.W. Davies, ARNASON, B. “Converting CO, Emissions and Hydrogen lute Gas Flows” (Overview), R. Ruitenberg, H. Dijkman, H.E. Oliver, M.T. Smith, and G.J. Grant, November, pp. into Methanol Vehicle Fuel” (Overview), B. Arnason and and C.J.N. Buisman, May, p. 45. 46-50 T.1. Sigfisson, May, pp. 46-47. BUNCE, G.M. “Plasma-Based Processes for Waste Vitrifica- DEAKIN, J. “A Water-Cooled Hood System for Peirce- ATKINSON, K.J.W. “Predicting Microstructure from Ato- tion” (Commentary), P.R. Taylor and G.M. Bunce, October, Smith Converters and Similar Furnace Vessels” (Over- mistic Rule Set Cellular Automata” (JOM-e: Overview), p. 13. view), W. Drummond and J. Deakin, May, pp. 40-41. K.J.W. Atkinson, R.W. Grimes, M.O. Zacate, P.D. Lee, A.G BUNCE, G.M. “Using a Plasma-Fired Cyclone Reactor for DEMOPOULOS, G.P. “The Separation and Concentration Jackson, and S.R. LeClair, August <www.tms.org/ pubs Calcining and Vitrifying Radioactive Wastes” (Applied of Iron from Zinc Process Solutions” (Overview), F.T. journals /JOM/9908/ Atkinson /A tkinson-9908.htmI>. Technology), G.M. Bunce, P.R. Taylor, and S.G. Roden, Principe and G.P. Demopoulos, December, pp. 34-35. October, pp. 22-24. DIJKMAN, H. “Biologically Removing Sulfur from Dilute BUTZER, G.A. “Production-Scale Spray Formingo f Super- Gas Flows” (Overview), R. Ruitenberg, H. Dijkman, and alloys for Aerospace Applications” (JOM-e: Industrial In C.J.N. Buisman, May, p. 45 BAHTISHL,N . “Everything You Need to Know about Being sight),G.A. Butzer, April <www.tms.org/pubs/journals DOHERTY, C. “Nails from a 2,400 Year Old Shipwreck: A a Manager but Never Learned in College” (JOM-e: Over- JOM /9904/Butzer /Butzer-9904.html>. Study of Copper in a Marine Archaeological Environ- ew), N. Bahtishi, June <www.tms.org /pubs/journals ment” (Feature: Archaeotechnology), S. Shalev, Y.K ahanov, JOM /9906 / Bahtishi /B ahtishi-9906.htmi and C. Doherty, Februaryp,p . 14-17. BARAKAT, M.A. “Recovering Metal Values Hydro- DRUMMOND, W. “A Water-Cooled Hood System for metallurgically from Spent Dry Battery Cells” (Research CAI, C. “Recent Developments in the Thermomechanical Peirce -Smith Converters and Similar Furnace Vessels” Summary), M.A. Rabah, M.A. Barakat, and Y.Sh. Mahrous, Fatigue Life Prediction of Superal(JlOMo-ey: s” Overview), (Overview), W. Drummond andJ . Deakin, May, pp. 40-41 December, pp. 41-43 C. Cai, P.K. Liaw, M. Ye, and J. Yu, April <www.tms.org DU BE, W.P. “ Monitorintghe Solidification of Single-Crystal BARBER, J.P. “Full-Density Net-Shape Powder Consolida- pubs journals JOM /9904/Cai/Cai-9904.html>. Castings Using High- E nergy X-Ray Diffraction” (JOM-e: tion Using Dynamic Magnetic Pulse Pressures” (Over CAMPBELL, F. “The Scale-up and Design of Pressure Hy- Research Summary), D.W. Fitting, W.P. Dubé, and T.A. view), B. Chelluri and J.P. Barber, July pp. 36-37. drometallurgical Process Plants” (Fra7 Historical In- Siewert, July <www.tms.org pubs journals /JOM/9907/ BARTON-JONES, I. “Pressure Leaching Las Cruces Cop- sight), F. Campbell, W.D. Vardill, and L. Trytten, Se ptem- Fitting /F itting-9907.htm|> per Ore” (Research Summary), R.M. Berezowsky, T. Xue, ber, pp. 12-15. DUNCANJ,.L . “Sheet Metal Forming: A Review” (Tutorial), M.J. Collins, M. Makwana, I. Barton-Jones, M. Southgate, CARRANZA, F. “Recycling EAF Dust Leaching Residue to W.F. Hosford and J.L. Duncan, November, pp. 39-44 and J.K. MacLean, December, pp. 36-40. the Furnace: A Simulation Study” (Research Summary), | <www.tms.org/pubs/journals/JOM/9911/Hosford- BASU, A.K. “The CMSF Process: The Spray Forming of ee R. Romero,N . Iglesiasa,nd F. Carranza, August, 9911.html>. Clean Metal” (JOM-e: Overview), W.T. Carter, Jr., M.G. pp. 28- DUTRIZAC, J.E. “The Effectiveness of Jarosite Species for Benz, A.K. Basu, R.J. Zabala, B.A. Knudsen, R.M. Forbes CARTER, W. T. Jr. ‘The CMSF Process: The Spray Forming Precipitating Sodium Jarosite” (Research Summary), J.E. Jones, H.E. Lippard, and R.L. Kennedy, April of Clean Metal” (JOM-e: Overview), W.T. Carter, Jr., M.G Dutrizac, December, pp. 30-32. www.tms.org/pubs/journals/JOM/9904/Carter Benz, A.K. Basu, R.J. Zabala, B.A. Knudsen, R.M. Forbes Carter-9904.html> Jones, H.E. Lippard, and R.L. Kennedy, April BEACH, D.B. “Using RABiTS to Fabricate High-Tempera- <www.tms.org/pubs/journals/JOM/9904/Carter ture Superconducting Wire” (Overview), A. Goyal, R Carter-9904.html> EDDY, T.L. “Treating Waste with PAM” (Overview), T.L. Feenstra, F Paranthaman, D.F. Lee, D.M. CHANG, Y.A. Letrers 1 EE R, Y.A. Chang, Nov., p 2 Eddy, October, pp- 20-21 Kroeger, D.B a |.S. Morrell, T.G. Chirayil, D.T CHAWLA, N. “The Fracture Toughness and Fatigue Behav- EDWARDS, G.R. “Ceramic-Metal Interfaceasnd the Spread- Verebelyi, X. Cui, E.D. Specht, D.K. Christen, and P.M. ior of DRA” (Research Summary), A.B. Pandey and N ing of Reactive Liquids” (Overview), A. Meier, D.A. Martin, July, pp. 19-23 Chawla, November, pp. 69-72 Javernick, and G.R. Edwards, February, pp. 44-47. BEARNE, G.P. “The eee ofg es Reduction CHELLURIL, B. “Full-Density, Net-Shape Powder Consoli- ENSZ, M. “Investigating Solidification with the Laser-Engi- Cell Process Control” (Overview), G.P. Bearne, May, pp dation Using Dynamic Magnetic Pulse Pressures” (Over neered Net Shaping (LENS™) Process” (JOM-e: Overview), w), B. Chelluri and J.P. Barber, July, pp. 36-37. W. Hofmeister, M. Wert, J. Smugeresky, J.A. Philliber, M. BEAZLEY, T.M. “Abating Greenhouse Gas Emissions in 1, E.Z. “The ABCs of Scientific Presentations” (F: Griffith, and M. Ensz, July <www.tms.org/pubs/ Metallurgaincd aMalt erials Processing” (F N Thing Professional Affairs), E.Z. Chen, December, pp. 16-18 journals /JOM/9907 /H ofmeister / Hofmeister-9907.htmI>. Other), T.M. Beazlev, May, p. 56 CHIRAYIL, T.G. “Using RABiTS to Fabricate High-Tem- BEAZLEY, T.M. “Educators Lead Increases in 1998 U.S perature Superconducting Wire” (Overview), A. Goyal, R. Engineering Phra (F Professiona fairs), T.M Feenstra, F.A. List, M. Paranthaman, D.F. Lee, D.M. Beazley, March, pp. 10-11 Kroeger, D.B. Beach, J.S. Morrell, T.G. Chirayil, D.T. FALLER, K. “Using Ti-5111 for Marine Fastener Applica- BEAZLEY, T.M. “The Horse-Tha at-N ever-r -We is Makes Tri- Verebelyi, X. Cui, E - Specht, D.K. Christen, and P.M. tions” (Overview), J. Been and K. Faller, June, pp. 21-24 umphant Return to Milan” (END N Things Other), T.M Martin, July, pp. 19-23 FANG, Y. “Observing and Measuring Solidification Phe- Beazley, September, p. 48 CHO, T. “Low Dielectric Constant Materials for Advanced nomena at High Temperatures” (JOM-e: Overview), C. BEAZLEY, T.M. “NIST Web Site Provides P: rog ram Infor- Interconnects” (Overview), M. Morgen, E.T. Ryan, J.-H Orrling, Y. Fang,N . Phinichka,S. Sridhar,and A.W.Cramb, mation and Much More” (fF N Net Trans), T.M. Zhao,C . Hu, T. Cho, and P.S. Ho, September, pp. 37-40 July <www.tms.org /p ubs /journals /JOM /9907 /Orrling/ Beazley, March, p. 48 CHRISTEN, D.K. “Using RABiTS to Fabricate High-Tem- Orrling-9907.html> BEAZLEY, T.M. “REWAS Serves as a ‘Model’ for TMS perature Superconducting Wire” (Overview), A.G oyal, R FATTINGER, V. “A Sulfuric-Acid Process with Near-Zero Internati nalI nitiatives (S rto”“REWAS "99: The TMS Feenstra, F.A. List, M. Paranthaman, D.F. Lee, D.M SO, Gas Emissions” (Overview), W. Jaeger, V. Fattinger, T. Fall E actior ess Metallurgy Meeting), T.M. Beazley Kroeger, D.B. Beach, J.S. Morrell, T.G. Chirayil, D.T Keilpart, and H.-J. Hamel, May, pp. 42-43. December, p. 2 Verebelyi, X. Cui, E.D. Specht, D.K. Christen, and P.M FECHT, H. “Ni-Based Superalloysfo r Turbine Discs” (Over- BECKER, M. | M. Becker, August, p. 2 Martin, July, pp. 19-23 view), D. Furrer and H. Fecht, January, pp. 14-17. BECKER, M.N. “Aluminum: New Challenges in Down- COLE, J.I. “Using Fast Reactor Component Evaluation for FEENSTRA, R. “Using RABiTS to Fabricate High-Tempera- stream Activities” (O: v), M.N. Becker, November Pressurized Water Reactor Life Extension” (Research Sum- ture Supe srconducting Wire” (Overview), A. Goyal, R. mary), T.R. Allen, J.1. Cole, E.A. Kenik, H. Tsai, S. Ukai, S Feenstra, F.A. List, M. Paranthaman, D.F. Lee, D.M. for Marine Fastener Applications” Mizuta, and T. Yoshitake, October, pp. 27-30. Kroeger, D.B. Beach, J.S. Morrell, T.G. Chirayil, D.T. 4 K. Faller, June, pp. 21-24 COLLINS, M.J. “Iron Control in Zinc Pressure Leach Pro- Verebelyi, X. Cui, E.D. Specht, D.K. Christen, and P.M. BENEDICT, M. D. Discrete Modeling via Function Ap- cesses” (Overview), K.R. Buban, M.J. Collins, and I.M Martin, July, pp. 19-23. proximation Methods: ging Atomic- and Microscales Masters, December, pp. 23-25 <www.tms.org /p ubs /jour- FILIPOVICH, LK. “Integrating Coal Combustion and Red JOM-e: Overvie A.G. Jackson and M.D. Benedict, Au- nals/JOM/9912/Buban-9912.html>. Mud Sintering at an Alumina Refinery” (Overview), gust<www.tms.org s/journals /JOM /9908 /J ackson COLLINS, M.J. “Pressure Leaching Las Cruces Copper Rayzman and LK. Filipovich, August, pp. 16-18. Jackson-990h8t.m ! Ore” (Research Summary), R.M. Berezowsky, T. Xue, M.] FITTING, D.W. “Monitoring the Solidification of Single- BENZ, M.G. “The CMSF Process: The Spray Forming of Collins, M.M akwana, I. Barton-Jones, M. Southgate, and Crystal Castings Using High-Energy X-Ray Diffraction” Clean Metal” (JOM-e: Over ), W.T. Carter, Jr., M.G J.K. MacLean, December, pp. 36-40. (JOM-e: Research Summary), D.W. Fitting, W.P. Dubé, and Benz, A K Basu, R.J. Zabala, B.A. Knudsen, R.M. Forbes COLVIN, G. “Vacuum-Die Casting Titanium for Aerospace r.A. Siewert, July <www.tms.org/pubs/journals/JOM/ Jones i I ij, and R.L. Kennedy, April and Commercial € ompone nts” (Overview), D. Larsen and 9907 / Fitting /F itting-9907.html> journals /JOM/9904/ Carter G. Colvin, June, pp. 26-27. FORBES JONES, R.M. “The CMSF Process: The Spray Form- Carter- COOPER, K.P. “Producing Net-Shape Products by Powder ing of Clean Metal” (JOM-e: Overview), W.T. Carter, Jr., BE — RG, B.R ev ew of the book Mani Metallurgy” (Commentary), K.P. Cooper, July, p. 25 M.G. Benz, A.K. Basu, R.J. Zabala, B.A. Knudsen, R.M. CRAMB, A.W. “Observing and Measuring Solidification Forbes Jones, H.E. Lippard, and R.L. Kennedy, April E ‘Re ews), B Berenberg November, Phenomena at High Temperatures” (JOM-e: 02 erview), C <www.tms.org /pubs/journals/JOM/9904/Carter / BEREZOWSKY, R.M. “Pressure Leaching Las Cruces C op- Orrling, Y. Fang, N. Phinichka,S. Sridhar,and A.W.Cramb, Carter-9904.html> per Ore” (Resea ), R.M. Berezowsky, T. Xue. July <www.tms.org/pubs/journals /JOM /9907 /Orrling FORBES JONES, R.M. “The Structural Evolution of Super- M.J. Collins, M.M akwana, I. Barton-Jones, M. Southgate Orrling-9907.html> alloy Ingots during Hot Working” (Overview), R.M. Forbes and J.K. MacLean, December, pp. 36-40 CRONIN, W. “A Metallurgical Assessment of SnPbAg Sol- Jones and L.A. Jackman, January, pp. 27-31 BEWLAY, B.P. “Processing High-Temperature Refractory- der for GaAs Power Devices” (Research Summary), J.M <www.tms.org/pubs/journals/JOM/9901 /ForbesJones- Metal Silicide In-Situ Composites” (Overvier ), B.P. Bewlay Parsey, Jr., S. Valocchi, W. Cronin, J. Mohr, B.L. Scrivner, 9901.html> M.R. Jackson, and P.R. Subramanian, April, pp. 32-36. and K. Kyler, March, pp. 28-31 FRAY, D.J. “Remov ing Impurities from Steel Scrap Using BHATKAL, R.M. “The Technical Cost Modeling of Near- CUL, X. “Using RABiTS to Fabricate High-Temperature Su- Air and Chlorine Mixtures” (Research Summary), J.K.S. Tee Net-Shape P MManufa (Overview), R.M. Bhatkal perconducting Wire” (Overview), A. Goyal, R. Feenstra, and DJ. Fray, \ugust, pp. 24- and T. Hannibal, July, pp.2 F.A. List, M. Paranthaman, D.F. Lee, D.M. Kroeger, D.B. FRAZIER, W.G. “Holistic Strate gies for Designing Multi- BIELER, T.R. Miceoiaes ictural ¥ volution during the Hot Beach, J.S. Morrell, T.G. Chirayil, D.T. Verebelyi, X stage Materials Processes” (Overview), W.G. Frazier and Working of Superalloys’ (Commentary), S.L. Semiatin and Cui, E.D. Specht, D.K. Christen, and P.M. Martin, July, pp E.A. Medina, September <www.tms.org /pubs/journals/ TR. Bieler, January, p 19-23 JOM /9909 / Frazier /F razier-9909.html>. 44 JOM ¢ December 1999 FREAR, D.R. “Materials Issues in Area-Array Microe ‘lec- rial), W.F. Hosford and J.L. Duncan, November pp. 39-44 November, pp. 4, 10 tronic Packaging” (Overview), D.R. Frear, March, pp-22 <www.tms.org/pubs/journals/JOM/9911 /H osford- KINSMAN, K. “Materials Challenges in Interconne 9<9w03w. wh.ttmml>s .org/pubs/journals/JOM/9903/Frear- HO9S9L1E1.Rh,t mlD>. “Recent Insights into the Metallurgical Tech- ZT. raFdu,e -ODf.f sG oyfaolr, RaKp. idK inDsempalno,y mGe.n t”S amu(eDlessiognn,) , aK. ndFr Rut FROES, F.H. “The 14th International Ti Applications Con- nologg ies of Ancient Mesoamerica” (Feature: Archa March, pp. 19-21 ference and Exhibition” (Conference Review), F.H. Froes rte hnology) D. Hosler, May pp 14 KIRKENDALL, E. “Marking JOM’s 50th Anniversary v and R.H. Jones, June, pp. 40-41 HU, C. “Low Dielectric Constant Materials for Advanced a Looatk th e Journal's Origins” (F N Things Oth FROES, F.H. “The Titanium Image: Ascending to New Interconnects” (Overview), M. Morgen, E.T. Ryan, J.-H E. Kirkendall, January, p. 52 Heights” (Commentary), F.H. Froes, June, p. 13 Zhao, C. Hu, T. Cho, and P.S. Ho, September, pp. 37-40 KNUDSENB.,A. “The CMSF Process: The Spray Formingo f FROES, F.H. “Will the Titanium Golf Club Be Tomorrow’s HUANG, M. “The Impact-Fe atigue Fractureo f Metallic Ma- Ciean Metal” (JOM-e: Overview), W.T. Carter, Jr., M.G FRMUaTsShCyH YN,ib licKk.? ”“ Ma(tOevreiravlise w)C,h alFl.eH.n geFsro esi,n IJnuntee,r coppn.n ec1t8i-o20n ptpe.r ial1s5”- 18(O verview), J. Yu, P.K. Liaw, and M. Huang, April BJeonnze,s , A.KH.. E. Basu,L ipR.pJ.a rZda,b ala,a ndB .A.R .L.K nudsKeenn,n edRy.,M . FoArpbreisl Trade-Offs for Rapid Deployment” (Design), K. Frutschy, HULL, J.R. “Using High-Temperature Superconductors for www.tms.org/pubs/journals/JOM/9904/Carter Z. Fu, D. Goyal, K. Kinsman, G. Samuelson, and R. Vogt Levitation Applications” (Overview), J.R. Hull, July, pp Carter-9904.html> March, pp. 19-21 13-18 KROEGER, D.M. “Using RABiTS to Fabricate High-Tem- FU, Z. “Materials Challenges in Interconnection: Trade-Offs HUNT, W.H., Jr. “Discontinuously Reinforced Aluminum perature Superconducting Wire” (Over v), A Goyal R for Rapid Deployment” (Design), K. Frutschy, Z. Fu, D Current Status and Future Direction” (Commentary), B Feenstra, F.A. List, M. Paranthaman, D.F. Lee, D.M Goyal,K .K insman, G. Samuelsona,n d R. Vogt, March, pp Maruyama and W.H. Hunt, Jr., November, pp. 59-61 Kroeger, D.B. Beach, J.S. Morrell, T.G. Chirayil, D.1 19-21 HUNT, W.H., Jr. “The World Still Won't Beat a Path to Your Verebelyi, X. Cui, E.D. Specht, D.K. Christen, and P.M FURRER, D. “Ni-Based Superalloys for Turbine Discs” (Over- Door: Transitioning DRtAo t he Marketplace l ia Martin, July, pp. 19-23 view), D. Furrer and H. Fecht, January, pp. 14-17 6I n2s-ig6ht4) , W.H. Hunt, Jr., and B. Maruyama, Novembe KYLER, K. “A Metallurg ical Asse sssment of SnPbAg Solder for GaAs Power Devices” (Research Summary), ].M. Parsey HUR, S. “The 360° Cold Be nding of Ti- Jr., S.V alocchi, W. Cronin, J.M ohr, B.L. Scrivner, and K eter Seamless Tube” (Resea Kyler, March, pp. 28-31 GABB, P.J. “The Industrial Separation of Copper and Ar- Park, June, pp. 28-30 KYTO,M. “Using Computational F luid Dy namics to Modify senic as Sulfides” (Overview), P.J. Gabb and A.L. Davies, HYLAND, MLM. “Irrevers Adsorption in the Dry- a Waste- Heat Boiler Design” (Over ), Y. Yang, A September, pp. 18-19 Scrubbing Process” (Overview), A.R. Gillespie, M.M Jokilaakso, P. Taskinen, and M Kyté Maa y, pp. 36-39, 47 GAtLuEr,al WI.nFt.e rm“eAtpalplliyci ng CToLmPp oBuonnddsi”n g (Otov etrhvei ewJ)o,i ninWg. Fo.f SGtraulce- Hyland, and J.B. Metson, May, pp. 30-32 L February, pp. 49-52 GERMAN, R.M. “Gravitational Effects on C ompact Shap- LARSEN, D. “Vacuum-Die Casting Titanium for Aerospace ing and Microstructure during | iquid-Phase Sintering IACOCCA, R.G. “Gravitational Effects on Compact Shap- and Commercial Comy pone nts” (Overview), D. Larsen and (Research Summary), A. Upadhyaya, R.G. Iacocca, and ing and Microstructure during Liquid-Ph ase Sintering G. Colvin, June, pp. 26-2 R.M. German, April, pp. 37-40 (Research Summary), A. Upadhyaya, R.G. Iacocca and LaSALLE, J.C. “Net-Shape Processingx Using an Aqueous- GERTH, R. “Extrusion Die Design: A New Methodology of R.M. German, April pp. 3740. BasMIMe Bidnde r” (Overview), ].C. LaSalle and M Zedalis Using Design of Experiments as a Precursor to Neural IGLESIAS, N. “Recycling EAF Dust Leaching Residue to July, pp. 38-39 Networks” (JOM-e: Overview), B.V. Mehta, H.G hulman the Furnace: A Simulation Study” (Research Sur 4), I LAWRENCE, R.W. “Removing and Stabilizing As in A« and R. Gerth, September <www.tms.org/pubs/journals Palencia, R.R omero, N. Iglesiaasn,d F. Carranza aoa Mine Water” (Overview), R.W. Lawrence and T.W. Hi JOM /9909 /M ehta / Mehta-9909.htmIl>. pp- 28-32 September, pp. 27-29 GHULMAN, H. “Extrusion Die Design: A New Methodol LEACH, R.M. “An Alternative to Arsenic Disposal: Wood ogy of Using Design of Experiments as a Precursor to Preservation” (Overview), R.M. Leach September p. 34 Neural Networks” (JOM-e: Overview), B.V. Mehta, H LEATHAM, A. “Spray Forming: Alloys, Products, and Ghulmana,n d R. Gerth, September <www.tms.org/pubs JACKMAN, L.A. “The Structural Evolution of Superalloy Markets” (JOM-e: Overvit A. Leatham, April journals /JOM/9909 /M ehta /Mehta-9909.html> Ingots during Hot Working” (Overview), R.M. Forbes Jones <www.tms.org/pubs/journa rt JOM /9904/Leatham GILLESPIE, A.R. ‘Irreversible HF Adsorption in the Dry- and L.A. Jackman, January pp. 27-31 <www.tms.org Leatham-9904.html> Scrubbing Process” (Overview), A.R. Gillespie, M.M pubs /journals/JOM/9901 /F orbesJones-9901.html LeCLAIR, S.R. “Predicting Microstructure from Atomistic Hyland, and J ° Metson May.P P. 30-32 JACKSON, A.G. “Discrete Modeling via Function Approxi- Rule Set Cellular Automata” (JOM-e: Ove GINATTA,M.V. M.V. Ginatta, April mation Methods: Bridging Atomic-and Microscales” (JOM- Atkinson, R.W. Grimes, M.O. Zacate, P.D. Lee 5 2 e: Overview), A.G. Jackson and M.D. Benedict, August son, and S.R. LeClair, August <www.tms.org GOYAL, A. “Using RABiTS to Fabricate High-Temperature <www.tms.org/pubs/journals/JOM/9908/Jackson journals /JOM/9908/ Atkinson / Atkinson-9908.html> Superconducting Wire” (Overview), A. Goyal, R. Feenstra, lackson-9908.htm|> LEE, D.F. “Using RABiTS to Fabricate High-Temperature F.A. List, M. Paranthaman, D.F. Lee, D.M Kroeger, D.B JACKSON, A.G. “Predicting Microstructure from Atomis- SuperconductiWnigre ” (Overview), A. Goyal, R. Feenstra Beach, J.S. Morrell, T.G. Chirayil, D.T. Verebelyi, X tic Rule Set Cellular Automata” (JOM-e: Overview), K.J.W F.A. List, M. Paranthaman, D.F. Lee, D.M. Kroeger, D.B. Cui, E.D. Specht, D.K. Christen, and P.M. Martin, July, Atkinson, R.W. Grimes, M.O. Zacate, P.D. Lee, A.G. Jack- Beach, J.S. Morrell, T.G. Chirayil, D.T. Verebelyi, X. Cui GOpYp.A 1L9-,2D 3. “Materials Challengesi n Interconnection: Trade jsoonu,r naalsn d /SJ.OR.M /9L9e0C8la i/r, AtkiAnusgouns t/ Atk<iwnwswo.nt-m9s9.08o.rhgt/mplu>b s E.3D . Specht, D.K. Christen, and P.M. Martin, July rr Offs for Rapid Deployment” (Design), K. Frutschy, Z. Fu, JACKSON, M.R. “Processing High-Temperature Refrac- LEE, P.D. “Predicting Microstructure from Atomistic Rule pDp. . Go1y9a-l2,1 K. Kinsman, G. Samuelson, and R. Vogt, March, tBeowrlya-yM,e talM .R.S iliJcaicdkes onI,n- Siatnud P.CR.o mpSousibtreasm”a ni(aOnv,e rvieAwp)r,il , Bp.Pp. SAettk inCseolnl,u laRr.W . AGurtiommeast, a” M.O. (JZOaMc-aet:e , PO.vDe.r Lee, v), A.G. K.JJa.cWk - GRANT, G,J. “Characterizing Al Tailor-Welded Blanks for 32-50. son, and S.R. LeClair, August <www.tms.org/pubs/jour Automotive Applications” (Overview), R.W. Davies, H.E JAEGER, W. “A Sulfuric-Acid Process with Near-Zero SO. nals/JOM/9908/ Atkinson / Atkinson-9908.htm|> Oliver, M.T. Smith, and G.J. Grant, November, pp. 46-50 Gas Emissions” (Overview), W. Jaeger, V. Fattinger, T LIAW, P.K. “The Impact-Fatigue Fractureo f Metallic Mate- GREEN, J.A.S. | , ].A.S. Green, Novem- Keilparta,n d H.-J. Hamel, May, pp. 42-43 rials” (Overview), J. Yu, P.K. Liaw, and M. Huang, April ber, pp. 2, 4 JAVERNICK, D.A. “Ceramic-Metal Interfaces and the pp. 15-18 GRIFFITH, M. “Investigating Solidification with the Laser- Spreadingo f Reactive Liquids” (Overview), A. Meier, D.A LIAW, P.K. “The Mechanical Behavior of High-Tempera- Engineered Net Shaping (LENS™) Process” (JOM-e: Over Javernick, and G.R. Edwards, February, pp. 444 ture Materials” (Commentary), P.K. Liaw, April, p. 14 vieW.w Ho)fmei,ste r, M. Wert, J.S mugeresky,J.A. Philliber, JERO, P.D. “Modelingth e Gas By-productso f Metalorganic LIAW, P.K. “Recent Developmentsi n the Thermomechanical M. Griffith, and M. Ensz, July <www.tms.org/pubs/jour- Chemical Vapor Deposition” (JOM-e: Research Summary) Fatigue Life Prediocf Stupieraollnoys ” (JOM-e: Over nals /JOM/9907 /H ofmeister /H ofmeister-9907.html> J.G. Jones and P.D. Jero, August <www.tms.org/pubs C. Cai, P.K. Liaw, M. Ye, and J.Y u, April <www.tms.org GRIMES, R.W. “Predicting Microstructure from Atomistic journals /JOM/9908/Jones/Jones-9908.html> pubs /journals /JOM/9904 /Cai /Cai-9904. html Rule Set Cellular Automata” (JOM-e: Overview), K.J.W JOKILAAKSO, A. “Using Computational Fluid Dynamics LIPPARD, H.E. “The CMSF Process: The Spray Formin g of Atkinson, R.W. Grimes, M.O. Zacate, P.D. Lee, A.G. Jack- to Modify a Waste-Heat Boiler Design” (Overview), Y Clean Metal” (JOM-e: Overview), W.T. Carter, Jr., M.G son, and S.R. LeClair, August <www.tms.org/pubs Yang, A. Jokilaakso, P. Taskinen, and M. Kyté, May, pp Benz, A.K. Basu, R.J. Zabala, B.A. Knudsen, R.M. Forbes journals/JOM/9908/ Atkinson/ Atkinson-9908.html> 36-39, 47. Jones, H.E. Lippard, and R.L. Kennedy, April JONES, J.G. “Modeling the Gas By-proofd Muetaclotrgasni c www.tms.org/pubs/journals/JOM/9904/Carter Chemical Vapor Deposition” (JOM-e: Research Summary), Carter-9904.html> J.G. Jones and P.D. Jero, August <www.tms.org/pubs LIST, F.A. “Using RABiTS to Fabricate High-Temperature HAMEL, H.-J. “A Sulfuric-Acid Process with Near-ZeroS O journals /JOM/9908 /Jones/Jones-9908.html> Superconducting Wire” (Overview), A. Goyal, R. Feenstra Gas Emissions” (Overview), W. Jaeger, V. Fattinger, 1 JONES, R.H. “The 14th International Ti Applications Con- F.A. List, M. Paranthaman, D.F. Lee, D.M. Kroeger, D.B Keilpart, and H.-J. Hamel, May, pp. 42-43 ference and Exhibition” (Conference Review), F.H. Froes Beach, J.S. Morrell, T.G. Chirayil, D.T. Verebelyi, X HANNIBAL,T . “The Technical Cost Modelof iNeanr-gNet - and R.H. Jones, June, pp. 40-41. Cui, E.D. Specht, D.K. Christen, and P.M. Martin, July, Shape P/M Manufacturing” (Overview), R.M. Bhatkal and pp. 19-23 T. Hannibal, July, pp. 26-27. LORIA, E.A. | 57 if E E.A. Loria, November HAVLIK, M. “Removing As from Converter Dust by a p. 10. Hydrometallurgical Method” (Research Summary), KAHANOY, Y. “Nails from a 2,400 Year Old Shipwreck: A LUMLEY, R.M. Review of the book Aluminum: Tec Vircikova and M. Havlik, September, pp. 20-23. Study of Copper in a Marine Archaeological Environ- Applications and Environment file of a Modern Mi al HEBEISEN, J.C. “Producing Large P/M Near-Net Shapes ment” (Feature: Archaeotechnology), S.S halev, Y.K ahanov, (Env Notes: Book Reviews), R.M. Lumley, November, p. 80. Using Hot Isostatic Pressing” (Overview), S.J. Mashl, J.€ and C. Doherty, February, pp. 14-17 Hebeisen, and C.G. Hjorth, July, pp. 29-31. KANG, S.H. “Metallurgical Techniques for More Reliable HEILMAIER, M. “The Role of Grain Structure in the C reep Integrated Circuits” (Overview), S.H. Kang, J.W. Morris, and Fatigue of Ni-Based Superalloy PM 1000” (Research Jr., and A.S. Oates, March, pp. 16-18. MacDONALD, B.A. “National Science Foundation Oppor Summary), M. Heilmaier and F.E.H. Miiller, April, pp KEILPART, T. “A Sulfuric-Acid Process with Near-Zero tunities for Collaborative Research” (JOM-e: Overview) SO, Gas Emissions” (Overview), W. Jaeger, V. Fattinger, B.A. MacDonald, June <www.tms.org/pubs/journals HIGGS, T.W. “Removing and Stabilizing As in Acid Mine lr. Keilpart, and H.-J. Hamel, May, pp. 42-43. JOM /9906/ MacDonald /M acDonald-9906.html> Water” (Overview), R.W. Lawrence and T.W. Higgs, Sep- KELLER, F. | ERS Epi ,F. Keller, November, p. 10 MacLJE.K.A “PNres,sur e Leaching Las Cruces Copper Ore tember, pp. 27-29 KENIK, E.A. “Using Fast Reactor Component Evaluation (Research Summary), R.M. Berezowsky,T. Xue, M.J. Collins, HJORTH, C.G. “Producing Large P/M Near-Net Shapes for Pressurized Water Reactor Life Extension” (Research M. Makwana, I. Barton-Jones, M. Southgate, and J.K Using Hot Isostatic Pressing” (Overview), S.J. Mashl, J.C Summary), T.R. Allen, J.I. Cole, E.A. Kenik, H. Tsai, S. Ukai MacLean, December, pp. 36-40. Hebeisen, and C.G. Hjorth, July, pp. 29-31 S. Mizuta, and T. Yoshitake, October, pp. 27-30 MAHROUS, Y.Sh. “Recovering Metal Values Hydro- HO, P.S. “Low Dielectric Constant Materials for Advanced KENNEDY, R.L. “The CMSF Process: The Spray Formingo f metallurgically from Spent Dry Battery Cells” (Research Interconnects” (Overview), M. Morgen, E.T. Ryan, J.-H Clean Metal” (JOM-e: Overview), W.T. Carter, Jr., M.G Summary), M.A. Rabah, M.A. Barakaatn,d Y.Sh. Mahrous, Zhao, C. Hu, T. Cho, and P.S. Ho, September, pp. 37-40 Benz, A.K. Basu, R.J. Zabala, B.A. Knudsen, R.M. Forbes December, pp. 41-43 HOFMEISTER, W. “Investigating Solidification with the Jones, H.E. Lippard, and R.L. Kennedy, April MAKWANA, M. “Pressure Leaching Las Cruces Copper Laser-Engineered Net Shaping (LENS™) Process” (JOM- <www.tms.org /pubs/journals /JOM/9904/Carter Ore” (Research Summary), R.M. Berezowsky, T. Xue, MJ e: Overview), W. Hofmeister, M. Wert, J. Smugeresky, J.A. Carter-9904.htmI>. Collins, M.M akwana, I. Barton-Jones, M. Southgate, and Philliber, M. Griffith, and M. Ensz, July <www.tms.org KEVORKIJAVN.M,. “Aluminum Composites for Automo- J.K. MacLean, December, pp. 36-40. pubs/journals/JOM/9907 / Hofmeister /H ofmeister- tive Applications: A Global Perspective” (Overview), V.M. MALIN, J.T. “Using Hybrid Modeling for Testing Intelli- 9907.htmI>. Kevorkijan, November, pp. 54-58 gent Software for Lunar-Mars Closed Life Support” (JOM- HOSFORD, W.F. “Sheet Metal Forming: A Review” (Tuto- KEVORKIJAVN.M,. Lerrers1 , V.M. Kevorkijan, e: Overview), ].T. Malin, September <www.tms.org /p ubs 1999 December #¢ JOM 45 journals /JOM/9909/ Malin /Malin-9909.htmI>. Summary), M.A. Rabah, M.A. Barakat, and Y.Sh. Mahrous, MARTIN, P.M. “Using RABiTS to Fabricate High-Tempera- December, pp. 41-43. ture Superconducting Wire” (Overview), A. Goyal, R. RADACK, D.V. “Federal Trademark Anti-Dilution Law— Feenstra, F.A. List, M. Paranthaman, D.F. Lee, D.M. NEVLAND, PJ. “The High-Temperature Deformation and A Powerful New Tool for Owners of Famous Trade- Kroeger, D.B. Beach, J.S. Morrell, T.G. Chirayil, D.T Tensile Ductility of Al Alloys” (Overview), E.M. Taleff and marks” (Enp Notes: Material Matters), D.V. Radack, April, Verebelyi, X. Cui, E.D. Specht, D.K. Christen, and P.M. P.J. Neviand, January, pp. 34-36 p. 48 <www.tms.org/pubs/journals/maJtOteMr/s / Martin, July, pp. 19-23. NICKEL, C.K. “HIP-Clad Products for the Plastics Indus- matters-9904.html>. MARUYAMA,B . “Discontinuously Reinforced Aluminum try” (Overview), M.F. Bishop and C.K. Nickel, July, pp. 32- RAYZMAN, V.L. “Integrating Coal Combustion and Red Current Status and Future Direction” (Commentary), B. 34. Mud Sintering at an Alumina Refinery” (Overview), V.L. Maruyama and W.H. Hunt, Jr., November, pp. 59-61. NIINOML M. “Recent Titanium R&D for Biomedical Appli- Rayzman and IK. ny ic ng pp. 16-18. MARUYAMA, B. “The World Still Won't Beat a Path to cations in Japan” (Overview), M. Niinomi, June, pp. 32-34. REDDY, R.G. Lerrers To prror, I.C.1. Okafor and R.G. Your Door: TransDRiA tto thie Moarkentpliacen” (gInd us- NIJHOF, G.H. “Upgrading Nonferrous Metal Scrap for Reddy, August, p. 2. trial Insight), W.H. Hunt, Jr., and B. Maruyama, Novem- Recycling Purposes” (Research Summary), G.H. Nijhof and REDDY, R.G. “The Oxidation Behavior of High-Tempera- ber, pp. 62-64 P.C. Rem, August, pp. 20-23 ture Aluminides” (Overview), LC.I. Okaforand R.G. Reddy, MASHL, S.J. “Producing Large P/M Near-Net Shapes Us- June, pp. 35-39 ing Hot Isostatic Pressing” (Overview), S.J. Mashl, J.C. REIMANN, J.P. “Managing Research and Development Hebeisen, and C.G. Hjorth, July, pp. 29-31 under Multicompany Collaboration” (JOM-e: Overview), MASON, N. “Aluminum: Approaching the New Millen- OATES, A.S. “Metallurgical Techniques for More Reliable J.P. Reimann, June <www.tms.org/pubs/journals/JOM/ nium” ‘(Oo v), H.A. Oye, N. Mason, R.D. Peterson, Integrated Circuits” (Overview), S.H. Kang, J.W. Morris, 9906 /Reimann/Reimann-9906.htmI>. N.E. Richards, E.L. Rooy, F.J. Stevens McFadden, R.D. Jr., and A.S. Oates, March, pp. 16-18. REM, P.C. “Upgrading Nonferrous Metal Scrap for Recy- Zabre.nik, F.S. Williams, and R.B. Wagstaff, Februaryp,p . ODLE, J.H. Lerrers To THe Eprror, J.H. Odle, April p. 2. cling Purposes” (Research Summary), G.H. Nijhof and P.C 29-42. OKAFOR, I.C.I. Lerrers To THe Eprror, .C.1. Okafor and R.G Rem, August, pp. 20-23. MASTERS, LM. “Iron Control in Zinc Pressure Leach Pro- Reddy, August, p. 2. RESS, D.A. “Using Fuzzy Logic for Molecular Modeling” cesses” (Overview), K R. Buban, M.J. Collins, and I.M OKAFOR, IL.C.I. “The Oxidation Behavior of High-Tem- (JOM-e: Overview), D.A. Ress, August <www.tms.org/ Masters, December, pp. 23-25 <www.tms.org/pubs perature Aluminides” (Overview), 1.C.1. Okafor and R.G. pubs/ journals /JOM/9908 /R ess /Ress-9908.htmI>. journals /JOM/9912/Buban-9912.html> Reddy, June, pp. 35-39. RICHARDS, N.E. “Aluminum: Approaching the New Mil- MATAYA, M.C. “Simulating Microstructural Evolution OLIVER, H.E. “Characterizing Al Tailor-Welded Blanks for lennium” ( rview), H.A. Oye, N. Mason, R.D. Peterson, during the Hot Working of Alloy 718” (Research Summary), Automotive Applications” (Overview), R.W. Davies, H.E. N.E. Richards, E.L. Rooy, F.J. Stevens McFadden, R.D. M.C. Mataya, January, pp. 18-26 Oliver, M.T. Smith, and G.J. Grant, November, pp. 46-50. Zabreznik, F.S. Williams, and R.B. Wagstaff, February, pp. MAVOORL, H. “Copper/Low-k Interconnects for Smaller ORRLING, C. “Observing and Measuring Solidification 29. and Faster Circuits” (Overview), H. Mavoori, September, Phenomena at High Temperatures” (JOM-e: Overview), C RINDERER, B.’ ‘Modeling Composition / Processing /Prop- p. 36 Orrling, Y. Fang, N. Phinichka,S.Sridhar,and A.W.Cramb, erty Relationships in a Cold-Rolled Aluminum Alloy” McFADDEN, S.X. “Deformation Mechanisms and Tensile July <www.tms.org /pubs/journals/JOM /9907 /Orrling / (Research Summary), 1J. Polmear, J.E. Tibballs, and B. Superplasticity in Nanocrystalline Materials” (Overview), Orrling-9907.htmI>. Rinderer, November, pp. 51-53. R.S. Mishra, S.X. McFadden, R.Z. Valiev, and A.K OYE,H.A. “Aluminum: Approachitnhge New Millennium” RITTNER, M.N. “Economics of the U.S. P/M Industry” Mukherjee, January, pp. 37-40 (Overview), H.A. Oye, N. Mason, R.D. Peterson, N.E. (Feature: Economics), M.N. Rittner, July, p. 24. McGINN, P.J. “Progress in Applying High-Temperature Richards, E.L. Rooy, F.J. Stevens McFadden, R.D ROBINSON, J.J. IN THE Finat ANALysiIS, J.J. Robinson, Janu- Superconductors” (Commentary), P.J. McGinn, July, p. 12. Zabreznik, F.S. Williamsa,n d RB. Wagstaff, February, pp- ary—December, F L, McINTOSH, J. “Using CD-SEM Metrology in the Manufac- 29-42. ROBINSON, J.J. “JOM-e pr Annual ae Presenta- ture of Semiconductors” (Overview), J. McIntosh, March, tions to Internet” (EnpN otes: Net Trans), J.J. Robinson, op. 38-39. June, p. 48. MEDINA, E.A. “Holistic Strategies for Designing Multi- RODEN, S.G. “Using a Plasma-Fired Cyclone Reactor for stage Materials Processes” (Overview), W.G. Frazier and PALENIC. “IReAcyc,lin g EAF Dust Leaching Residtuo eth e Calcining and Vitrifying Radioactive Wastes” (Applied E.A. Medina, September <www.tms.org/pubs/journals Furnace: A Simulation Study” (Research Summary), I. Technology), G.M. Bunce, P.R. Taylor, and S.G. Roden, JOM/9909 /F razier /Frazier-9909.html> Palencia, R. Romero, N. Iglesiasa,n d F. Carranza, August, October, pp. 22-24. MEDINA, E.A. “Incorporating Hybrid Models intoa Frame- pp. 28-32. ROMENETS, V. “Processing Industrial Wastes with the work for Designing Multistage Material Processes” (Over- PANDEY, A.B. “The Fracture Toughness and Fatigue Be- Liquid-Phase Reduction Romelt Process” (Research Sum- iew), E.A. Medina, September <www.tms.org/pubs havior of DRA” (Research Summary), A.B. Pandey and N. mary), V. Romenets, V. Valavin, Yu. Pokhvisnev, and S. journals /JOM/9909 /M edina /M edina-9909.htmI> Chawla, November, Pp: 69-72. Vandariev, August, pp. 33-37. MEHTA, B.V. “Extrusion Die Design: A New Methodology PARANTHAMAN, M. “Using RABiTS to Fabricate High- ROMERO, R. “Recycling EAF Dust Leaching Residue to the of Using Design of Experiments as a Precursor to Neural Temperature Superconducting Wire” (Overview), A.Goyal, Furnace: A Simulation Study” (Research Summary), I. Networks” (JOM-e: Overview), B.V. Mehta, H.G hulman, R. Feenstra, F.A. List, M. Paranthaman, D.F. Lee, D.M Palencia, R. Romero, N. Iglesias, and F. Carranza, August, and R. Gerth, September <www.tms.org/pubs/journals Kroeger, D.B. Beach, J.S. Morrell, T.G. Chirayil, D.T. pp. 28-32. JOM/9909 /M ehta /M ehta-9909.html> Verebelyi, X. Cui, E.D. Specht, D.K. Christen, and P.M ROOY, E.L. “Aluminum: Approaching the New Millen- MEIER, A. “Ceramic-Metal Interfaces and the Spreading of Martin, July, pp. 19-23 1g ‘ (Overview), H.A. Oye, N. Mason, R.D. Peterson, Reactive Liquids” (Overview), A. Meier, D.A. Javernick, PARK, J.S. “The 360° Cold Bending of Ti-6Al-4V Large- N.E. Richards, E.L. Rooy, F.J. Stevens McFadden, R.D. and G.R. Edwards, February, pp. 44-47 Diameter Seamless Tube” (Research Summary), S. Hur and Zabreznik, F.S. Williams, and R.B. Wagstaff, February, pp- MEIER, A. | 4. Meier, November, p. 10 ].S. Park, June, PP: 28-30. 29-42 METSON, J.B. “Irreversible HF Adsorption in the Dry- PARSEY, J.M., Jr. “A Metallurgical Assessment of SnPbAg RUITENBERG, R. “Biologically Removing Sulfur from Di- Scrubbing Process” (Overview), A.R. Gillespie, M.M Solder for GaAs Power Devices” (Research Summary), ].M lute Gas Flows” (Overview), R. Ruitenberg, H. Dijkman, Hyland, and J.B. Metson, May, pp. 30-32 Parsey, Jr., S. Valocchi, W. Cronin, J. Mohr, B.L. Scrivner, and C.J.N. Buisman, May, p. 45 MISHRA, B. “REWAS '99: The TMS Fall Extraction and and K. Kyler, March, pp. 28-31. RUNGTA, R. Review of the book Proceedings of the NATO Process Metallurgy Meeting” (Conference Review), B. PARSEY, J.M., Jr.“ Metallurgical Issues in Microelectronics” Advanced Study Ins titute, on 4 Advanced Light ze y, amis 2 Mishra, December, pp. 19-21 (Commentary), ].M. Parsey, Jr., March, p. 14. posites (END Nott MISHRA, R.S. “Deformation Mechanisms and Tensile Su- PERO-SANZ ELORZ, J.A. “Melting and Sintering Platinum >. 80. perplasticity in Nanocrystailine Materials” (Overview), R.S. in the 18th Century: The Secret of the Spanish” (Feat RYAN, E.T. “Low Dielectric Constant Materials for Ad- Mishra, S.X. McFadden, R.Z. Valiev, and A.K Mukherjee Archaeotechnology), J.A. Pero-Sanz Elorz, J.I. Verdeja- vanced Interconnects” (Overview), M. Morgen, E.T. Ryan, January, pp. 37-40 Gonzalez, J.P. Sancho-Martinez, and N. Vilela, October, J.-H. Zhao, C. Hu, T. Cho, and P.S. Ho, September, pp. MISHRA, R.S. “Designing DRA Composites for High pp. 9-12, 41 37-40. Cree p Stre ngth” (Overview), R.S. Mishra, November, PETERSON, R.D. “ Aluminum: Approaching the New Mil- pp 6 5- Hs lennium” (Overview), H.A. Oye, N. Mason, R.D. Peterson, MIZUTA, S. “Using Fast Reactor Component Evaluation for N.E. Richards, E.L. Rooy, F.J. Stevens McFadden, R.D. Pressurized Water Reactor Life Extension” (Research Sum Zabreznik, F.S. Williams, and R.B. Wagstaff, February, pp SAMUELSON, G. “Materials Challenges in Interconnec- nary), T.R. Allen, J.1. Cole, E.A. Kenik, H. Tsai, S. Ukai,S 29-42. tion: Trade-Offs for Rapid Deployment” (Design), K Mizuta, and T. Yoshitake, October, pp. 27-30 PHILLIBER, J.A. “Investigating Solidification with the La- Frutschy, Z. Fu, D. Goyal, K. Kinsman, G. Samuelson, and MOHR, J. “A Metallurgical Assessment of SnPbAg Solder ser-Engineered Net Shaping (LENS™) Process” (JOM-e: R. Vogt, March, pp. 19-21. for GaAs Power Devices” (Research Summary),].M. Parsey, Overview), W. Hofmeister, M. Wert, J. Smugeresky, J.A. SANCHO-MARTINEZ, J.P. “Melting and Sintering Plati- Jr., S.V alocchi, W. Cronin, J. Mohr, B.L. Scrivner, and K Philliber, M. Griffith, and M. Ensz, July <www.tms.org/ num in the 18th Century: The Secret of the Spanish” Kyler, March, pp. 28-31 pubs/journals/JOM/9907 /H ofmeister /H ofmeister- (Feature: Archaeotechnology), J.A. Pero-Sanz Elorz, J.1. MONHEMILUS, A.J. “Removing and Stabilizing As from 9907.htmI>. Verdeja-Gonzalez, J.P. Sancho-Martinez, and N. Vilela, Copper Refir cuits by Hydrothermal Processing” PHINICHKA, N. “Observing and Measuring Solidification October, pp. 9-12, 41 (Research Sum» A.J. Monhemius and P.M. Swash, Phenomena at High Temperatures” (JOM-e: Overview), C SCHLESINGER, M.E. Review of the book Hydrometallurgy September, pp 33 Orrling, Y. Fang, N. Phinichka,S.Sridhar,and A.W.Cramb, (END Notes: Book Reviews), M.E. Schlesinger, July, p. 48 MORGEN, M. “Low Dielectric Constant Materials for Ad- July <www.tms.org /pubs/journals /JOM/9907 /Orrling, SCHULSON, E.M. “The Structure and Mechanical Behavior anced Interconnects” (Over ), M. Morgen, E.T Orrling- 9907 html>. of Ice” (Feature: Featured Overview), E.M. Schulson, Febru- Ryan, J.-H. Zhao, C. Hu, T. Cho, and P.S. Ho, September, PIRET, N.L. “The Re mov al and Safe Disposal of Arsenic in ary, pp. 21-27 <www.tms.org/ pubs /journals/JOM/9902/ pp. 3740 Copper Processing” (Commentary), N.L. Piret, September, Schulson-9902.html> MORREL L, g RABiTS to Fabricate High-Tem- op. 16-17. SCHWARTZ, E. “Surviving a Layoff” (JOM-e: Overview), E. ' ( rview), A. Goyal, R POINDEXTER, J.W. “Using Hybrid Modeling for the Inter- Schwartz, June <www.tms.org/pubs/journals/JOM/ anthaman, D.F. Lee, D.M disciplinary Design of More Affordable Systems” (Over. 9906 /Schwartz /Schwartz-9906.htmI>. Morrell, T.G. Chirayil, D.1 view), J.W. Poindexter, B.A. Stucke, and G.C. Shumaker, SCRIVNER, B.L. “A Metallurgical Assessment of SnPbAg E.D* . Specht, D.K. Christen, and P.M SPeoipntdeemxbteerr /<P wowinwd.etxmtse.r-o9r9g0/9p.uhtbmsl/>j ournals/JOM/9909 SPoalrdseery , foJrr. , SG.a AVsa loPcocwheir, WDe.v iCcreosn”i n,( ReJs.e Maorchhr , SuBm.Lm.a rSyc)r,i vnJe.rM,. gical Techniquefso r More Re- POKHVISNEV, Yu. “Processing Industrial Wastes with the and K. Kyler, March, pp. 28-31. ), S.H. Kang, J.W Liquid-Phase Reduction Romelt Process” (Research Sum- SEETHARAMAN, S. “The Computer-Based Study of Mul- 16-18 mary), V. Romenets, V. Valavin, Yu. Pokhvisnev, and S ticomponent Slag Viscosities” (Research Summary), S. acture and Fabricationo f Tanta Vandariev, August, pp. 33-37 Seetharaman, D. Sichen, and J.Y. Zhang, August, pp. K.D. Moser, April, pp. 29-31 POLMEAR, LJ. “Modeling Composition /P rocessing /Prop- 38-40. MLK HE RIEE A.K. “Deformation Mechanisms and Tensile erty Relationships in a Cold-Rolled Aluminum Alloy” SIEGMUND, A. “The International Symposium on Zinc per} asticity in : ) (Research Summary), 1.). Polmear, J.E. Tibballs, and B and Lead Processing” (Feature: Conference Review), A. Valiev, and A.K Rinderer, November, pp. 51-53 Siegmund, May, pp. 33-34. PRINCIPE, G.P. “The Separation and Concentration of Iron SEMIATIN, S.L. “Microstructural Evolution durithneg Ho t 1in Structure in the Creep from Zinc P’ rocess Solutions” (Overview), F.T. Principe and Workofi Sunpergall oys” (Commentary), S.L. Semiatin and Based Superalloy PM 1000” (Research G.P. Demopoulos, December, pp. 34-35. IR. Bieler, January, p. 13 and F.E.H. Miiller, April, pp SHALEY, S. “Nails from a 2,400 Year Old Shipwreck: A Study of Copper in a Marine Archaeological Environ- for Zircaloy Life Prediction in ment” (Feature: Archaeotechnology), S.S halev, Y. Kahanov, K.L. Murty, October RABAH, M.A. “Recovering Metal Values Hydro- and C. Doherty, February, pp. 14-17. metallurgically from Spent Dry Battery Cells” (Research SHUMAKER, G.C. “Using Hybrid Modeling for the Inter- JOM ¢ December 1999 disciplinary Design of More Affordable Systems” (Over- TASKINEN, P. “Using Computational Fluid Dynamics to WILLIAMS, ES. *‘ Aluminum Approaching the New Mil view), J.W. Poindexter, B.A. Stucke, and G.C. Shumaker, Modify a Waste- Heat Boiler Design” (Overview), Y lennium” (Ox »), H.A. Oye, N. Mason, R.D. Peterson September <www.tms.org/pubs/journals/JOM/9909 Yang, A. Jokilaakso, P. Taskinen, and M. Kyté, May, pp N.E. Richards, f L Rooy, F.J. Stevens McFadden, R.D Poindexter /P oindexter-9909.html> 36-39, 47 Zabreznik, F.S. Williams, and R.B. Wagstaff, Februz SICHEN, D. “The Computer-Based Study of Multicompo- TAYLOR, P.R. “Plasma-Based Processes for Waste Vitrifica- 29-42. nent Slag Viscosities” (Research Summary),S.Seetharaman, tion” (Commentary), P.R. Taylor and G.M. Bunce, October, WOMACK, R.K. “Using the Centrifugal Method D. Sichen, and J.Y. Zhang, August, pp. 38-40 D. 13 Plasma-Arc Vitrification of Waste” (O SIEWERT, T.A. “Monitoring the Solidification of Single TAYLOR, P.R.“Using a Plasma-Fired Cyclone Reactor for Womack, October, pp. 14-16 <www.tms.org Crystal Castings Using High-Energy X-Ray Diffraction’ Calcining and Vitrifying Radioactive Wastes” ( Applied jourvals/JOM/9910/Womack-9910.html> (JOM-e: Research Summary), D.W. Fitting, W.P. Dubé, and Technology), G.M. Bunce, P.R. Taylor, and S.G. Roden, T.A. Siewert, July <www.tms.org/pubs/journals/JOM October, pp: 22 2-24 9907 /F itting / Fitting-9907.html> TEE, J.K.S. “Removing ‘ities from Steel Scrap Using SIGFUSSON, T.I. “Converting CO, Emissions and Hydro- Air and Chlorine Mixture Ss ry), ].K.S. Tee XUE, T. “Pressure Leaching Las Cruces Copper Ore gen into Methanol Vehicle Fuel” (Overview), B. Arnason and DJ. Fray, August, pp. 24- search Summary), R.M. Berezowsky, T. Xue, MJ. ¢ and T.I. Sigftisson, May, pp. 46-47. TIBBALLS, J.E. “Modeling Cc »mposition /P rocessing Prop- M. Makwana, I. Barton-Jones, M. Southgate SILVERMAN, A.B. “The Forfeiture of U.S. Patent Rights by erty Re *lationships in a Cold-Rolled Aluminum. Alloy MacLean, December, pp. 36-40 Placing an Invention on Sale” (Enp N Material Mat- (Research Summary) lJ Polmear, J.E. Tibballs, and B ters), A.B. Silverman, February, p. 64 <www.tms.org Rinderer, November -53 pubs /journals/JOM / matters /matters-9902.html> TRYTTEN, L. “The Scz ha up and Desigonf Pressure — SILVERMAN, A. Outside Invention Submissions—lIs It array Process Plants” (Feature: Historic zht YANG,Y . “Using Computational Fluid Dynamics t » Modify Betttoe Griv e or Receive?” (ENp N : Material Matters) F — ll, W.D. Vardill, and L. Trytten, Septe mber, pp. a Waste-Heat Boiler Design” (¢ Y. Yang, A A.B. Silverman, ‘Dec ember, p. 56 12-15 Jokilaakso, P. Taskinen, and M. Kyt6, May 3 7 SILVERMAN, A.B. “Questions to Ask in Selecting a Patent TSAI, H. “Using Fast Reactor Component Evaluation for YE, M. “Recent Developments in t Thermomechan Attorney” (Enp N Material Matters), A.B. Silverman, Pressurized Water Reactor Life Extension” (Research Sum- Fatigue Life Predictofi Sounpe r JOM-« October, p. 48 mary), T.R. Allen, J.1. Cole, E.A. Kenik, H. Tsai,S . Ukai,S C. Cai, P.K. Liaw,M . Ye, and J.Y u, April SILVERMAN, A.B. “The Value and Validity of Electronic Mizuta, and T. Yoshitake, October, pp. 27-30. pubs /journals /JOM /9904 /Cai /Cai-9904.ht Records in Patent Matters” (EN : Material Matters), YGARTUA, C.L. “Characterizing and Monitorin A.B. Silverman, August, P- 48 FiI m Processes with Spectroscopic I SMITH, M. | E , M. Smith, April, p. 2 iew), A.R. Srivatsa and C.L. Ys SMITH, M.T. “Characterizing Al Tailor-Welded Blanks for UKAI, S. “Using Fast Reactor Component Evaluation for YOSHIHARU, M. | Automotive Applications” (Overview), R.W. Davies, H.E Pressurized Water Reactor Life Extension” (Research Sum- April, p Oliver, M.T. Smith, and G.J. Grant, November, pp. 46-50 mary), T.R. Allen, J. Cole, E.A. Kenik, H. Tsai, S. Ukai, S YOSHIT: AKE, I.” Using Fe SMITH, R.L. “The aan of Metals on Society Part IX Mizuta, and T. Yoshitake, October, pp. 27-30 tion for Pressurized Water fe Exte United States” (Feature: Historical Insight), R.L. Smith, Oc- UPADHYAYA, A. “Gravitational Effectosn Compact Shap- earch Summary), T.R. Allen, ole, E.A. Ken tober, pp. 40-41 ing and Microstructure during I iquid-Phase Sintering S.L kai S. Mizuta, and T. Yoshitake, October SMITH, R.L. “The Impact of Metals on Society Part VI: The (Research Summary), A. Upadhyaya, R.G. Iacocca, and “The Impact-Fatigue ture of Me New World” (Feature: Historical Insight), R.L. Smith, March R.M. German, April, pp. 37-40. ),J .Y u, P w,and M. Huz pp. 12-13. SMITH, R.L. “The Impact of Metals on Society Part VII Recent Developments in the Thermomechani Peru” (Feature: Historical Insight), R.L. Smith, April,pp . 12- igue Life P rediction of Superalloys JOM-e: O 13 VALAVIN, V. “Processing Industrial Wastes with the Liq- Cai, P.K. Liaw, M. Ye, and J. Yu, April <www.tn SMITH, R.L. “The Impact of Metals on Society Part VIII uid-Phase Reduction Romelt Process” (Research Summary) pubs /journals /JOM /9904/Cai /Cai-9904.htmi Europe” (Feature: Historical Insight), R.L. Smith, June pp V.Romenets, V. Valavin, Yu. Pokhvisnev, andS . Vandariev, 10-11. August, pp. 33-37 SMITH, R.L. “The In act of Metals on Society Part X VALIEV, R.Z. “Deformation Mechanisms and Tensile Su- Brazil” (Feature: ! al vht), R.L. Smith, November, perplasticity in Nanocrystalline Materials” (Overview), R.S ZABALA, R.J. “The CMSF Process: The Spray Formir pp. 23-24. Mishra, S.X. McFadden, R.Z. Valiev, and A.K. Mukherjee Clean Metal” (JOM-e: Overview), W.T. Carter, Jr SMUGERESKY, J. “Investigating Solidification with the January, pp. 37-40. Benz, A.K. Basu, R.J. Zabala, B.A. Knudsen, R.M Forbes Laser-Engineered Net Shaping (LENS™) Process” (JOM- VALOCCHL, S. “A Metallurgical Assessment of SnPbAg Jones, H.E. Lippard, an L. Kenne di i e: Overview), W. Hofmeister, M. Wert, J. Smugeresky, J.A Solder for GaAs Power Devices” (Research Summary), ].M www.tms.org/pubs/journals/JOM Philliber, M. Griffith, and M. Ensz, July <www.tms.org Parsey, Jr., S. Valocchi, W. Cronin, J. Mohr, B.L. Scrivner, Carter-9904.html> pubs/journals /JOM/9907 /H ofmeister /H ofmeister- and K. Kyler, March, pp. 28-3 ZABREZNIK, R.D. “Aluminum Approac 9907.html> VANDARIEV, S. “Processing Industrial Wastes with the Millennium” (Over »), H.A. Oye, N. Mason SOUTHGATE, M. “Pressure Leaching Las Cruces Copper Liquid-Phase Reduction Romelt Process” (Research Sum- Peterson, N.E. Richards, E.L. Rooy, F.J. Stevens Mct Ore” (Research Summary), R.M. Berezowsky, T. Xue, M.J mary), V. Romenets, V. Valavin, Yu. Pokhvisnev, and S R.D. Zabreznik, F.S. Williams, and R.B. Wagstaff, Fet Collins, M.M akwana, I. Barton-Jones, M. Southgate, and Vandariev, August, pp. 33-37 ary, pp. 29-42 J.K. MacLean, December, pp. 36-40 VARDILL, W.D. “The Scale-up and Design of P ressure ZACATE, M.O. “Predicting Microstructur SPECHT, E.D. “Using RABiTS to Fabricate High-Tempera- Hydrometallurgical Process Plants” (Feature: Historical In Rule Set Cellular Automata” (JOM-e ture Superconducting Wire” (Overview), A. Goyal, R sight), F Campbe ll, W.D. Vardill, and L. Trytten, Se; ptem - Atkinson, R.W. Grimes, M.O. Zacate, P.D é Feenstra, F.A. List, M. Paranthaman, D.F. Lee, D.M ber, pp. 12-15 son, and S.R. LeClair, August <www.tms.org/pubs Kroeger, D.B. Beach, J.S. Morrell, T.G. Chirayil, D.T VASUDEVAN, V.K. Temperature and the Ductility, De- journals /JOM/9908/ Atkinson Atkinson -9908.html Verebelyi, X. Cui, E.D. Specht, D.K. Christen, and P.M formation, and Fracture of Al 7055” (Research Summary) ZEDALIS, M. “Net-Shape Processing Using an Aqueous Martin, July, pp. 19-23 [.S. Srivatsan and V.K. Vasudevan, January, pp. 42-45 BasMIMe Bidnde r” (Overvie jc LaSalle and M. Zedalis SRIDHAR, S. “Observing and Measuring Solidification Van SANDWIK, T. “Routes to Residue-Free Zinc Refin- July, pp. 38-39 Phenomena at High Temperatures” (JOM-e: Overview), C ing” (Overview), G. Van Weert and T. van Sandwijk, De- ZHANG, J.Y. “The Computer-Based Study of Multicompo Orrling, Y.F ang, N. Phinichka, S.S ridhar,and A.W.Cramb, cember, pp. 26-29 nent Slag Viscosities” (Research Summary), S.Seetharamar July <www.tms.org/pubs/journals/JOM /9907 /Orrling VAN WEERT, G. “Routes to Residue-Free Zinc Refining” D. Sichen, and J.Y. Zhang, August, pp. 38-40 Orrling-9907.html -w), G. Van Weert and T. van Sandwijk, December, ZHAO, J.-H. “Low Die lectric Constant Materi SRIVATSA, A.R. “Characterizing and Monitoring Thin- PP vanced Interconnects” (Overview), M. Morgen Film Processes with Spectroscopic Ellipsometry” (Over v Hoty GONZ ALEZ, J.1. “Melting and Sintering Plati- J.-H. Zhao, C. Hu, T. Cho Ho, September, ¢ view), A.R. Srivatsa and C.L. Ygartua, March, pp. 34-36 num in the 18th Centu iry The Secret of the Spanish” 37—40 SRIVATSA, A.R. “Nondestructive Evaluation Techniques (FEATUR Archaeotechnology), J.A. Pero-Sanz Elorz, J.I ZIARNIK, P. “Intellectual Property Models for Collabora in Semiconductor Wafer Fabrication” (Commentary), A.R Verdeja- Gonzalez, J.P phat tid Martinez, and N. Vilela, tive Research and Development” (JOM-e: Ove I Srivatsa, March, p. 33 October, pp 0-12, 41 Ziarnik, June <www.tms.org/pubs/journals/JOM /990¢ SRIVATSAN, T.S. “Temperature and the Ductility, Defor- VEREBELYI, D.T. “Using RABiTS to Fabricate High-Tem- Ziarnik /Z iarnik-9906.html mation, and Fracture of Al 7055” (Research Summary), T.S. perature Superconducting Wire” (Overview), A. Goyal, R Srivatsan and V.K. Vasudevan, January, pp. 42-45. Feenstra, F.A. List, M. Paranthaman, D.F. Lee, D.M STEPHENS, R.L. “Innovations in Smelter Gas Control’ Kroeger, D.B. Beach, J.S. Morrell, T.G. Chirayil, D.T The 1999 (Commentary), R.L. Stephens, May, P Verebelyi, X. Cui, E.D. Specht, D.K. Christen, and P.M STEVENS MCFADDEN, Fj. “Aluminum: Approaching Martin, July, pp. 19-23. tRh.eD . NePwe terMsiolnl, ennNi.uE.m ” Ri(cOh ards, w)E,. L. H.A.R ooyOy,e , F.JN. . SMtaesvoenn,s VICLeEnLtAu,r y:N . “TMheel tinSge craentd Soifn tertihne g SPp laantiisnhu”m in (Ftehaet ur18et h Subject Index McFadden, R.D. Zabreznik, F.S. Williams, and R.B Archaeotechnology), J.A. Pero-Sanz Elorz, J.I. Verdeja- Wagstaff, February, pp. 29-42 Gonzalez, J.P. Sancho-Martinez, and N. Vilela, October, STUCKE, B.A. “Using Hybrid Modeling for the Interdisci- pp. 9-12, 41 for JOM plinary Design of More Affordable Systems” (Overview), VIRCIKOVA, E. “Removing As from Converter Dust by a J.W. Poindexter, B.A. Stucke, and G.C. Shumaker, Sep- Hydrometallurgical Method”(Research Summary), tember <www.tms.org/pubs/ijournals/JOM/9909 Vircikova and M. Havlik, September, pp. 20-23. Can Be Viewed Poindexter /P oindexter-9909.htm] VOGT, R. “Materials Challenges in Interconnection: Trade- SUBRAMANIAN, P.R. “Processing High- Tempe rature Re- Offs for Rapid Deployment” (Design), K. Frutschy, Z. Fu fractory-Metal Silicide In-Situ Composites” (Over ’) D. Goyal, K. Kinsman, G. Samuelsona,nd R. Vogt, March, on the World B.P. Bewlay, M.R. Jackson, and P.R. Subramanian, April, pp- 19-21 yp. 327-_ 36. SURY ANARAY: A, C. Review of the book Mechancial Wide Web at Alloying (EN Book Reviews), C. Suryanarayana, July, p. 48 WAGSTAFF, R.B. “Aluminum: Approaching the New Mil- SWASH, P.M. “Removing and Stabilizing As from Copper lennium” (Overview), H.A. Oye, N. Mason, R.D. Peterson, RSeufmimnairnyg) ,C irAc.uJ.i tsM obnyh eHmyidursot haenrdm alP. M.P roScweassshi,n g”S ep(tReesmebaerrc,h ZN.aEb. rezRniickh,a rdF.sS,. WEi.Ll.l iamRsoo,y ,a nd F.J.R .B.S teWvaegnsst affM,c FaFdedbernua,r y, R.pDp www.ims.org/pubs/ . 30-33 29-42 WELCH, B.J. “Aluminum Production Paths in the New Millennium” (Overview), B.J. Welch, May, pp. 24-28 journals/JOM/ <www.tms.org/pubs/journals/JOM/9905/Welch- TALEFF, E.M. “Elevated-Temperature Deformation Mecha- 9905.html> nisms and Tensile Ductility” (Commentary), E.M. Taleff, WERT, M.’ have stigating Solidification with the Laser-Engi- Indexes/Index.html January, p. 33 neered Net Shaping( 1 E NS™) Process” (JOM-e: Overview), TALEFF, E.M. “The High-Temperature Deformation and W. Hofmeister, M. Wert, J.S mugeresky, J.A. Philliber, M Tensile Ductility of Al Alloys” (Overview), E.M. Taleff and Griffith, and M. Ensz, July <www.tms.org/pubs P.J. Neviand, January, pp. 34-36 journals /JOM /9907 /H ofmeister /H ofmeister-9907.html> 1999 December ¢ JOM

See more

The list of books you might like

Most books are stored in the elastic cloud where traffic is expensive. For this reason, we have a limit on daily download.