IS 12385: Textile machinery - knitting machines - Nominal diameter of circular machines

2007·0.94 MB·English

by  Bureau of Indian Standards

इंटरनेट मानक
Disclosure to Promote the Right To Information
Whereas the Parliament of India has set out to provide a practical regime of right to
information for citizens to secure access to information under the control of public authorities,
in order to promote transparency and accountability in the working of every public authority,
and whereas the attached publication of the Bureau of Indian Standards is of particular interest
to the public, particularly disadvantaged communities and those engaged in the pursuit of
education and knowledge, the attached public safety standard is made available to promote the
timely dissemination of this information in an accurate manner to the public.
“जान1 का अ+धकार, जी1 का अ+धकार” “प0रा1 को छोड न’ 5 तरफ”
Mazdoor Kisan Shakti Sangathan Jawaharlal Nehru
“The Right to Information, The Right to Live” “Step Out From the Old to the New”
IS 12385 (2007): Textile machinery - knitting machines -
Nominal diameter of circular machines [TXD 14: Machinery
for Fabric Manufacture]
“!ान $ एक न’ भारत का +नम-ण”
Satyanarayan Gangaram Pitroda
““IInnvveenntt aa NNeeww IInnddiiaa UUssiinngg KKnnoowwlleeddggee””
“!ान एक ऐसा खजाना > जो कभी च0राया नहB जा सकता हहहहै””ै”
Bhartṛhari—Nītiśatakam
“Knowledge is such a treasure which cannot be stolen”

IS 12385:2007
ISO 8117:2003

Indian Standard
TEXTILE MACHINERY — KNITTING MACHINES —
NOMINAL DIAMETER OF CIRCULAR MACHINES
( Firsf Revkion )
ICS 59.120.40

@ BIS 2007
BLJREAU OF INDIAN STANDARDS
MANAK BI-IAVAN1 9 BAHADUR SHAH ZAFAR MARG
NEW DELHI 110002
August 2007
Price Group 1
Machinery for Fabric Manufacture Sectional Committee, TX 14
NATlONAL FOREWORD
This Indian Standard (First Revision) which is identical with ISO 8117 : 2003 ‘Textile machinery —
Knitting machines — Nominal diameters of circular machines’ issued by the International Organization
for Standardization (ISO) was adopted by the Bureau of Indian Standards on the recommendation of
the Machinery for Fabric Manufacture Sectional Committee and approval of the Textile Division
Council.
This standard which was based on ISO 8117:1988 is being revised to align it with ISO 8117:2003.
The text of ISO Standard has been approved as suitable for publication as an Indian Standard without
deviations. Certain conventions are, however, not identical to those used in Indian Standards.
Attention is particularly drawn to the following:
a) Wherever the words ‘International Standard’ appear referring to this standard, they should
be read as ‘Indian Standard’.
b) Comma (,) has been used as a decimal marker, while in Indian Standards, the current
practice is to use a point (.) as the decimal marker.
In this adopted standard, reference appears to certain International Standards for which Indian
Standards also exist. The corresponding Indian Standards which are to be substituted in their places
are listed below along with their degree of equivalence for the editions indicated:
International Standard Corresponding Indian Standard Degree of
Equivalence
ISO 7839:1984 Textile machinery and IS 11819 : 1986 Textile machinery and Identical
accessories — Knitting machines — accessories — Knitting machines —
Classification and vocabulary Classification and vocabulary

ISO 8188:1986 Textile machinery and IS 12414 : 1988 Pitches of knitting Technically

accessories — Pitches of knitting machine needles Equivalent
machine needles
In reporting the results of a test or analysis made in accordance with this standard, if the final value,
observed or calculated, is to be rounded off, it shall be done in accordance with IS 2: 1960 ‘Rules for
rounding off numerical values (revised)’.
IS 12385:2007
ISO 8117:2003
hciian Standard
TEXTILE MACHINERY — KNITTING MACHINES —
NOMINAL DIAMETER OF CIRCULAR MACHINES
( First Revision)
1 Scope
This International Standard specifies the nominal diameters of circular knitting machines and the numerical
designations corresponding to the size of the machines. It is applicable to small- and large-diameter circular
knitting machines and to sinker machines.
2 Normative referermes
The following referenced documents are indispensable for the application of this document, For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 7839, Textile machinery and accessories — Knitting machines — Classification and vocabula~
ISO 8188, Textile machinery and accessories — Pitches of knitiing machine needles
3 Nominal diameters and numerical designation
For classifications and the vocabulary of knitting machines, see ISO 7839; for needle pitches, see ISO 8188.
Table 1 specifies the nominal diameter, in millimetres, and the numerical designation applicable to each
machine size.
IS 12385:2007
ISO 8117:2003
Table 1 — Circular knitting machines
I Small circular I Large circular
knitting machines knitting machines
Nominal diameter Designation Nominal diameter Designation
57 2 1/4 178 7
I 64 I 2 1/2 I 190 I 7 1/2
70 2314 203 8
76 3 229 9
83 3 1/4 254 10
I 89 I 3 1/2 I 279 I 11
I 95 I 3314 I 305 I 12
I 102 4 330 13
r==108 4114 356 14
I I 1
4112 381 15
I 121 4314 406 16
127 5 432 47
1 1 I
t 133 5 1/4 457 18
I 140 I 5 7/2 I 483 I 19
146 5 3/4 508 I 20
152 6 533 21
165 6 1/2 559 22
584 23
610 24 *
635 25
660 26
711 28
I 762 i 30
I ~ (787) (31)

I 914 I 36
t--%+t--+-
1 1067 I 42
I 1270 I 50
1473 58
1524 60
Values shown inbrackets should beavoidedasfar asDosslble,

2
Bureau of Indian Standards
BIS isa statutory institution established under the Bureau of /rrdian Standards Act, 1986 to promote
harmonious development of the activities of standardization, marking and quality certification of
goods and attending to connected matters in the country.
Copyright
BIS has the copyright of all its publications. No part of these publications maybe reproduced in any
form without the prior permission in writing of BIS. This does not preclude the free use, inthe course
of implementing the standard, of necessary details, such as symbols and sizes, type or grade
designations. Enquiries relating to copyright be addressed to the Director (Publications), BIS.
Review of Indian Standards
Amendments are issued to standards as the need arises on the basis of comments. Standards are
also reviewed periodically; a standard along withamendments isreaffirmed when such review indicates
that nochanges are needed; ifthe review indicates that changes are needed, itistaken upfor revision.
Users of Indian Standards should ascertain that they are inpossession of the latest amendments or
editionby referring tothe Iatest issue of‘BIS Catalogue’ and ‘Standards: Monthly Additions’.
This Indian Standard has been developed from Doc: No. TX 14 (0785).
Amendments Issued Since Publication
Amend No. Date of Issue Text Affected
—
BUREAU OF INDIAN STANDARDS
Headquarters:
Manak Bhavan, 9 Bahadur Sha h Zafar Marg, New Delhi 110002

Telephones: 23230131,23233375,2323 9402 website: Www.bis.org.in

Regionai Offices: Telephones
Central : Manak Bhavan, 9 Bahadur Shah Zafar Marg 23237617
NEW DELHI 110002 { 23233841
Eastern : 1/14 C.I.T. Scheme WI M, V.I.P. Road, Kankurgachi 23378499,23378561
KOLKATA 700054 { 23378626,23379120
Northern : SCO 335-336, Sector 34-A, CHANDIGARH 160022 2603843
{ 2609285
Southern : C.I.T. Campus, IV Cross Road, CHENNAI 600113 22541216,22541442
{ 22542519,22542315
Western : Manakalaya, E9 MlDC, Marol, Andheri (East) 28329295,28327858
MUMBAI 400093 { 28327891,28327892
Branches: AHMEDABAD. BANGALORE. BHOPAL. BHUBANESHWAR. COIMBATORE. FARIDABAD.
GHAZIABAD. GUWAHATI. HYDERABAD. JAIPUR. KANPUR. LUCKNOW. NAGPUR.
PARWANOO, PATNA. PUNE. RAJKOT. THIRUVANANTHAPURAM. VISAKHAPATNAM.

Printedat Simco Printing Press, Delhi