ebook img

Introduction to RF Power Amplifier Design and Simulation PDF

451 Pages·2016·19.53 MB·English
Save to my drive
Quick download
Download
Most books are stored in the elastic cloud where traffic is expensive. For this reason, we have a limit on daily download.

Preview Introduction to RF Power Amplifier Design and Simulation

I n t r o d u c t i o n t o RF Power Amplifier Design Simulation and I n t r o d u c t i o n t o RF Power Amplifier Design Simulation and Abdullah Eroglu INDIANA UNIVERSITY–PURDUE UNIVERSITY FORT WAYNE, IN, USA Boca Raton London New York CRC Press is an imprint of the Taylor & Francis Group, an informa business MATLAB® and Simulink® are trademarks of The MathWorks, Inc. and are used with permission. The MathWorks does not warrant the accuracy of the text or exercises in this book. This book’s use or discussion of MATLAB® and Simulink® software or related products does not constitute endorsement or sponsorship by The MathWorks of a particular pedagogical approach or particular use of the MAT- LAB® and Simulink® software. CRC Press Taylor & Francis Group 6000 Broken Sound Parkway NW, Suite 300 Boca Raton, FL 33487-2742 © 2016 by Taylor & Francis Group, LLC CRC Press is an imprint of Taylor & Francis Group, an Informa business No claim to original U.S. Government works Version Date: 20150312 International Standard Book Number-13: 978-1-4822-3165-6 (eBook - PDF) This book contains information obtained from authentic and highly regarded sources. Reasonable efforts have been made to publish reliable data and information, but the author and publisher cannot assume responsibility for the validity of all materials or the consequences of their use. The authors and publishers have attempted to trace the copyright holders of all material reproduced in this publication and apologize to copyright holders if permission to publish in this form has not been obtained. If any copyright material has not been acknowledged please write and let us know so we may rectify in any future reprint. Except as permitted under U.S. Copyright Law, no part of this book may be reprinted, reproduced, transmitted, or utilized in any form by any electronic, mechanical, or other means, now known or hereafter invented, including photocopying, microfilming, and recording, or in any information stor- age or retrieval system, without written permission from the publishers. For permission to photocopy or use material electronically from this work, please access www.copy- right.com (http://www.copyright.com/) or contact the Copyright Clearance Center, Inc. (CCC), 222 Rosewood Drive, Danvers, MA 01923, 978-750-8400. CCC is a not-for-profit organization that pro- vides licenses and registration for a variety of users. For organizations that have been granted a photo- copy license by the CCC, a separate system of payment has been arranged. Trademark Notice: Product or corporate names may be trademarks or registered trademarks, and are used only for identification and explanation without intent to infringe. Visit the Taylor & Francis Web site at http://www.taylorandfrancis.com and the CRC Press Web site at http://www.crcpress.com Dedicated to my sons, Duhan and Enes, and daughter Dilem Contents Preface....................................................................................................................xiii Acknowledgments ....................................................................................................xv Author ....................................................................................................................xvii Chapter 1 Radio Frequency Amplifier Basics.......................................................1 1.1 Introduction ...............................................................................1 1.2 RF Amplifier Terminology ........................................................5 1.2.1 Gain ..............................................................................5 1.2.2 Efficiency ......................................................................8 1.2.3 Power Output Capability ..............................................9 1.2.4 Linearity .......................................................................9 1.2.5 1-dB Compression Point .............................................10 1.3 Small-Signal vs. Large-Signal Characteristics ........................11 1.3.1 Harmonic Distortion ..................................................12 1.3.2 Intermodulation ..........................................................15 1.4 RF Amplifier Classifications ...................................................25 1.4.1 Conventional Amplifiers—Classes A, B, and C ........29 1.4.1.1 Class A ........................................................33 1.4.1.2 Class B ........................................................34 1.4.1.3 Class AB .....................................................36 1.4.1.4 Class C ........................................................36 1.4.2 Switch-Mode Amplifiers—Classes D, E, and F ........37 1.4.2.1 Class D ........................................................38 1.4.2.2 Class E ........................................................40 1.4.2.3 Class DE .....................................................41 1.4.2.4 Class F ........................................................42 1.4.2.5 Class S ........................................................45 1.5 High-Power RF Amplifier Design Techniques ........................45 1.5.1 Push–Pull Amplifier Configuration ...........................47 1.5.2 Parallel Transistor Configuration ...............................47 1.5.3 PA Module Combiners ...............................................49 1.6 RF Power Transistors ..............................................................50 1.7 CAD Tools in RF Amplifier Design ........................................51 References ..........................................................................................59 Chapter 2 Radio Frequency Power Transistors ...................................................61 2.1 Introduction .............................................................................61 2.2 High-Frequency Model for MOSFETs ....................................61 vii viii Contents 2.3 Use of Simulation to Obtain Internal Capacitances of MOSFETs ............................................................................71 2.3.1 Finding C with PSpice .............................................71 iss 2.3.2 Finding C and C with PSpice ...............................72 oss rss 2.4 Transient Characteristics of MOSFET ....................................75 2.4.1 During Turn-On .........................................................75 2.4.2 During Turn-Off .........................................................79 2.5 Losses for MOSFET ................................................................83 2.6 Thermal Characteristics of MOSFETs ....................................84 2.7 Safe Operating Area for MOSFETs ........................................87 2.8 MOSFET Gate Threshold and Plateau Voltage .......................88 References ..........................................................................................91 Chapter 3 Transistor Modeling and Simulation ..................................................93 3.1 Introduction .............................................................................93 3.2 Network Parameters ................................................................93 3.2.1 Z-Impedance Parameters ...........................................93 3.2.2 Y-Admittance Parameters ...........................................94 3.2.3 ABCD-Parameters ......................................................95 3.2.4 h-Hybrid Parameters ..................................................96 3.3 Network Connections ............................................................103 3.3.1 MATLAB® Implementation of Network Parameters ...111 3.4 S-Scattering Parameters ........................................................123 3.4.1 One-Port Network ....................................................123 3.4.2 N-Port Network ........................................................125 3.4.3 Normalized Scattering Parameters ..........................130 3.5 Measurement of S Parameters ...............................................143 3.5.1 Measurement of S Parameters for a Two-Port Network ....................................................................143 3.5.2 Measurement of S Parameters for a Three-Port Network ....................................................................145 3.5.3 Design and Calibration Methods for Measurement of Transistor Scattering Parameters ...148 3.5.3.1 Design of SOLT Test Fixtures Using Grounded Coplanar Waveguide Structure ...151 3.6 Chain Scattering Parameters .................................................165 3.7 Systematizing RF Amplifier Design by Network Analysis ...169 3.8 Extraction of Parasitics for MOSFET Devices ......................174 3.8.1 De-Embedding Techniques ......................................183 3.8.2 De-Embedding Technique with Static Approach .....186 3.8.3 De-Embedding Technique with Real-Time Approach ..................................................................187 References ........................................................................................194 Contents ix Chapter 4 Resonator Networks for Amplifiers..................................................197 4.1 Introduction ...........................................................................197 4.2 Parallel and Series Resonant Networks .................................197 4.2.1 Parallel Resonance ...................................................197 4.2.2 Series Resonance ......................................................205 4.3 Practical Resonances with Loss, Loading, and Coupling Effects ....................................................................................209 4.3.1 Component Resonances ...........................................209 4.3.2 Parallel LC Networks ...............................................216 4.3.2.1 Parallel LC Networks with Ideal Components ..............................................216 4.3.2.2 Parallel LC Networks with Non-Ideal Components ..............................................219 4.3.2.3 Loading Effects on Parallel LC Networks ...220 4.3.2.4 LC Network Transformations ...................223 4.3.2.5 LC Network with Series Loss ...................228 4.4 Coupling of Resonators .........................................................229 4.5 LC Resonators as Impedance Transformers..........................234 4.5.1 Inductive Load ..........................................................234 4.5.2 Capacitive Load ........................................................235 4.6 Tapped Resonators as Impedance Transformers ...................239 4.6.1 Tapped-C Impedance Transformer ..........................239 4.6.2 Tapped-L Impedance Transformer ...........................244 Reference ..........................................................................................260 Chapter 5 Impedance Matching Networks .......................................................261 5.1 Introduction ...........................................................................261 5.2 Transmission Lines ................................................................261 5.2.1 Limiting Cases for Transmission Lines ...................266 5.2.2 Terminated Lossless Transmission Lines.................268 5.2.3 Special Cases of Terminated Transmission Lines ...274 5.3 Smith Chart ...........................................................................276 5.3.1 Input Impedance Determination with Smith Chart ...282 5.3.2 Smith Chart as an Admittance Chart .......................285 5.3.3 ZY Smith Chart and Its Application .........................287 5.4 Impedance Matching between Transmission Lines and Load Impedances ..................................................................289 5.5 Single-Stub Tuning ................................................................292 5.5.1 Shunt Single-Stub Tuning ........................................292 5.5.2 Series Single-Stub Tuning ........................................294 5.6 Impedance Transformation and Matching between Source and Load Impedances ...............................................296 5.7 Signal Flow Graphs ...............................................................299 Reference ..........................................................................................305

Description:
Introduction to RF Power Amplifier Design and Simulation fills a gap in the existing literature by providing step-by-step guidance for the design of radio frequency (RF) power amplifiers, from analytical formulation to simulation, implementation, and measurement. Featuring numerous illustrations and
See more

The list of books you might like

Most books are stored in the elastic cloud where traffic is expensive. For this reason, we have a limit on daily download.