International Journal of Heat and Mass Transfer 1995: Vol 38 Table of Contents

23 Pages·1995·3.7 MB·English

Infernational Journal of
HEAT ans MASS
TRANSFER
Editors
E. HAHNE, J. P,. HARTNETT, P. J. HEGGS,
M. LEBOUCHE, A. I. LEONTIEV, O. G. MARTYNENKO,
W. J. MINKOWYCZ, I. TANASAWA, C.-L. TIEN, B. X. WANG
VOLUME CONTENTS AND AUTHOR INDEX
VOLUME 38, 1995
@™ PERGAMON
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
BOARD OF EDITORS
A. R. BALAKRISHNAN (Associate M. LEBOUCHE K. SPINDLER (Associate Editor)
Editor for India) Laboratoire d’Energétique et de Institut fiir Thermodynamik und
Department of Chemical Engineering Mécanique Théorique et Appliquée Warmetechnik
Indian Institute of Technology CNRS URA 875 Pfaffenwaldring 6
Madras 600 036, India 2, Avenue de la Forét de Haye D-70569 Stuttgart (Vaibingen)
E. HAHNE BP 160, 54504 Vandoeuvre-lés-Nancy Germany
Institut fiir Thermodynamik und Cedex, France
Warmetechnik A. I. LEONTIEV K. SUZUKI (Associate Editor)
Pfaffenwaldring 6 Department of Mechanical Engineering
Moscow State Technical University
D-70569 Stuttgart (Vaihingen) 2-nd Baumanskaya Str. 5 Kyoto University, Yoshidahonmachi
Germany Moscow 107005, Russia Kyoto 606, Japan
J. P. HARTNETT (Coordinating
Editor) OQ. G. MARTYNENKO I. TANASAWA
Energy Resources Center (M/C 156) Heat and Mass Transfer Institute Institute of Industrial Science
University of Illinois at Chicago Byelorussian Academy of Sciences University of Tokyo
South Peoria Street, 3300 ALH 25 Podlesnaya, Minsk, Belarus 7-22-1 Roppongi, Minato-ku
Chicago, IL 60607-7036, U.S.A. Tokyo 106, Japan
W. J. MINKOWYCZ (Coordinating
P. J. HEGGS
Department of Chemical Engineering Editor) C.-L. TIEN
UMIST Mechanical Engineering (M/C 251) University of California
University of Illinois at Chicago
PO Box 88 Berkeley, CA 94720, U.S.A.
842 West Taylor Street, 2049 ERF
Manchester M60 1QD, U.K. Chicago, IL 60607-7022, U.S.A.
S. Y. KO (Associate Editor) B. X. WANG
Institute of Engineering P. F. PETERSON (Associate Editor) Thermal Engineering Department
Thermophysics Department of Nuclear Engineering Tsinghua University, Beijing 100084
Chinese Academy of Sciences University of California China
PO Box 2706, Beijing 100080, China Berkeley, CA 94720, U.S.A.
HONORARY EDITORIAL ADVISORY BOARD
Co-Chairmen: E. R. G. ECKERT, University of Minnesota, Minneapolis, MN 55455, U.S.A.
U. GRIGULL, Technische Universitét, Miinchen, Germany
Past-Chairman: OWEN SAUNDERS, F.R.S., Imperial College, London, U.K.
Founding Editors: C.G AZLEY, Jr., The RAND Corporation, Santa Monica, California, U.S.A.
D. B. SPALDING, Imperial College, London, U.K.
J. P. BARDON, Nantes, France C. HOOGENDOORN, Delfi, J. W. ROSE, London, U.K.
F. J. BAYLEY, Brighton, U.K. The Netherlands J. F.S ACADURA, Villeurbanne,
A. BEJAN, Durham, NC, U.S.A. J. R. HOWELL, Austin, TX, U.S.A. France
A. E. BERGLES, Troy, NY, U.S.A. D. B. INGHAM, Leeds, U.K. V. M. K. SASTRI, Madras, India
B. T. CHAO, Urbana, IL, U.S.A. T. F. IRVINE, Jr., Stony Brook, NY, R. K. SHAH, E. Amherst, NY, U.S.A.
M. COMBARNOUS, Talence, France U.S.A. S. SIDEMAN, Haifa, Israel
K. CORNWELL, Edinburgh, U.K. S. KAKAC, Miami, FL, U.S.A. R. SIEGEL, Cleveland, OH, U.S.A.
R. COTTA, Rio de Janeiro, Brazil R. T. LAHEY, Troy, NY, U.S.A. H. SIMPSON, Glasgow, U.K.
E. M. SPARROW, Minneapolis, MN,
M. CUMO, Rome, Italy F. MAYINGER, Munich, Germany
U.S.A.
G. DE VAHL DAVIS, Kensington, M. D. MIKHAILOV, Sofia, Bulgaria
K. STEPHAN, Stuttgart, Germany
Australia B. B. MIKIC, Cambridge, MA, U.S.A.
M. A. STYRIKOVICH, Moscow,
A. A. DOLINSKY, Kiev, Ukraine W. NAKAYAMA, Tokyo, Japan
Russia
J. J.D. DOMINGOS, Lisbon, Portugal V. E. NAKORYAKOV, Novosibirsk, M. G. VELARDE, Madrid, Spain
R. ECHIGO, Tokyo, Japan Russia R. VISKANTA, West Lafayette, IN,
D. K. EDWARDS, Irvine, CA, U.S.A. R. I. NIGMATULIN, Moscow, Russia U.S.A.
Y. FUJITA, Fukuoka, Japan S. NISHIO, Tokyo, Japan D. VORTMEYER, Munich, Germany
B. GEBHART, Philadelphia, PA, F. OGINO, Kyoto, Japan D. R. WEBB, Manchester, U.K.
U.S.A. R. POHORECKI, Warsaw, Poland K. T. YANG, Notre Dame, IN, U.S.A.
R. J. GOLDSTEIN, Minneapolis, MN, G. D. RAITHBY, Waterloo, Canada S. M. YANG, Shanghai, China
U.S.A. U. RENZ, Aachen, Germany A. A. ZHUKAUSKAS, Vilnius,
R. GREIF, Berkeley, CA, U.S.A. J. F. RICHARDSON, Swansea, U.K. Lithuania
G. F. HEWITT, London, U.K. W. ROETZEL, Hamburg, Germany
PRODUCTION EDITOR
P. J. COLES
E-mail: [email protected]
Subscription Rates
Annual Institutional Subscription Rates 1995: North, Central and South America, U.S.$1841, Rest of the World, £1235. Associated
Personal Subscription Rates are available on request for those whose institutions are library subscribers. Sterling prices exclude
VAT. Non-VAT registered customers in the European Community will be charged the appropriate VAT in addition to the price
listed. Prices include postage and insurance and are subject to change without notice. Subscription enquiries from customers in
North America should be sent to: Elsevier Science Inc., 660 White Plains Road, Tarrytown, New York 10591-5153, U.S.A., and
for the remainder of the world to: Elsevier Science Ltd, The Boulevard, Langford Lane, Kidlington, Oxford OX5 1GB, U.K.
Back Issues. Back issues of all previously published volumes are available direct from Elsevier Science offices (Oxford, New York).
Published monthly plus additional issues in January, March, May, July, September and November
Copyright © 1995 Elsevier Science Ltd
Second-class postage paid at NEWARK NJ and additional mailing offices. Postmaster send address corrections to
International Journal of Heat and Mass Transfer, c/o Elsevier Science Inc., 660 White Plains Road, Tarrytown, New York
10591-5153, U.S.A.
VOLUME CONTENTS
January, Number 1
M. A. AL-NIMR Fully developed free convection in open-ended vertical
concentric porous annuli
K. GHALI, B. JONES and Modeling heat and mass transfer in fabrics
J. TRACY
D. Y. Tzou The anisotropic overall thermal conductivity induced
by preferentially oriented pores
Q. Yu, M. MAKHLOUF and Effect of stress acting upon the solid network in the
D. APELIAN two-phase zone during solidification
J. C. BoKAR and M. N. Ozisik An inverse analysis for estimating the time-varying
inlet temperature in laminar flow inside a parallel
plate duct
W.-M. YANG Effect of modulation on radiation-induced instability
P. J. STUTTAFORD, S. ANGHAIE Computation of high-temperature near-wall heat
and W. SHYY transfer using an enthalpy balancing scheme
M. ConrtTl Planar solidification of a finite slab: effects of the
pressure dependence of the freezing point
C. K. HsteEH Exact solutions of Stefan problems for a heat front
moving at constant velocity in a quasi-steady state
C. V. Le, N. G. Ly and Heat and mass transfer in the condensing flow of
R. POSTLE steam through an absorbing fibrous medium
T.-M. Liou and W.-B. WANG Laser holographic interferometry study of develop-
ing heat transfer in a duct with a detached rib array
F. M. RAMos et A. GIOVANNINI Résolution d’un probleme inverse multidimensionnel
de diffusion de la chaleur par la méthode des éléments
analytiques et par le principe de l’entropie maximale
D. MUKUTMONI and K. T. YANG Thermal convection in small enclosures: an atypical
bifurcation sequence
X. F. PENG, B. X. WANG, Experimental investigation of heat transfer in flat
G. P. PETERSON and H. B. MA plates with rectangular microchannels
Yu. I. DIMITRIENKO Thermal stresses and heat—mass transfer in ablating
composite materials
iii
iv Volume Contents
V. S. BuRAK, S. V. VOLKOV, 147 Experimental study of free-convective flow on a
O. G. MARTYNENKO, vertical plate with a constant heat flux in the presence
P. P. KHRAMTSOV and I. A. SHIKH of one or more steps
V. S. Burak, S. V. VOLKOV, Free-convective heat transfer on a vertical surface
O. G. MARTYNENKO, with heat-flux discontinuity
P. P. KHRAMTSOV and I. A. SHIKH
E. I. Virkin, S. L. SHURALYOV Radiation transfer in vibrationally nonequilibrium
and V. V. TAMANOVICH gases
M. K. BoLoaa, V. P. KOROVKIN Mechanism of condensation heat transfer enhance-
and I. K. SAVIN ment in an electric field and the role of capillary
processes
Letter to the Editors
H. J. H.B ROUWERS Comments on “Transition from transpiration to film cooling”
Corrigenda
Announcement
2nd European Thermal-Sciences and 14th UIT National
Heat Transfer Conference
January, Number 2
PANG SHUSHENG, R. B. KEEY 189 Modelling the temperature profiles within boards
and T. A. G. LANGRISH during the high-temperature drying of Pinus radiata
timber: the influence of airflow reversals
O. Boiron, G. LE PALEC and Aerothermic characterization of a high-power fast
PH. BOURNOT axial flow CO, laser
M. VYNNYCKY and S. KIMURA Transient conjugate free convection due to a vertical
plate in a porous medium
W. C. WANG, C. Yu and Condensation heat transfer of a non-azeotropic binary
B. X. WANG mixture on a horizontal tube
H. ZHANG and M. K. MOALLEMI Numerical simulation of hot-dip metallic coating
process
T. G. THOMAS and Turbulent simulation of open channel flow at low
J. J. R. WILLIAMS Reynolds number
D. J. BizzAk and M. K. CuHyu Use of a laser-induced fluorescence thermal imaging
system for local jet impingement heat transfer
measurement
J. Y. CHol and M.-U. Kim Three-dimensional linear stability of mixed-convective
flow between rotating horizontal concentric cylinders
C. ABID, F. PAPINI et Turbulence et chaos dans un conduit horizontal soumis
A. ROPKE a un phénoméne de convection mixte
Volume Contents Vv
T. F. Lin, W. T. Lin, Y. L. Tsay, 295 Experimental investigation of geyser boiling in an
J.C. Wu and R. J. SHyu annular two-phase closed thermosyphon
K. M. B. JANSEN 309 Heat transfer in injection moulding systems with
insulation layers and heating elements
A. CAVALIERE, M. EL-NAGGAR 317 Experimental analysis of intermaterial surfaces in the
and R. RAGUCCI study of gaseous mixing characteristics
M. OHTSUKA 331 Numerical analysis of swirling non-reacting and
reacting flows by the Reynolds stress differential
method
C. K. Ho and K. S. UDELL Mass transfer limited drying of porous media con-
taining an immobile binary liquid mixture
H. SALMUN Convection patterns in a triangular domain
H. SALMUN The stability of a single-cell steady-state solution
in a triangular enclosure
M. BEZIEL and K. STEPHAN Temperature distribution in the outlet of cross-flow
heat exchangers
Yu. A. BUYEVICH and Effective conductivity of a macroscopically inhomo-
V. A. USTINOV geneous dispersion
Book Review
CHR. BOYADJIEV Wave Flow of Liquid Films, by S. V. ALEKSEENKO,
V. E. NAKORYAKOV and B. G. POKUSAEV
February, Number 3
. ROBERTS, J. R. LEECH and 393 A new way of obtaining heat and mass transfer at
flat surfaces coated with swollen polymer by
measuring recession with projected fringes
Y.-P. SHin, C.-C. HUANG and Extended Leveque solution for laminar heat transfer
S.-Y. TSAY to power-law fluids in pipes with wall slip
T. ELPERIN and B. KRASOVITOV Radiation, thermal diffusion and kinetic effects in
evaporation and combustion of large and moderate
size fuel droplets
C. A. Cook and V. A. CUNDY Heat transfer between a rotating cylinder and a moist
granular bed
A. BEJAN Theory of heat transfer-irreversible power plants—
II. The optimal allocation of heat exchange equipment
W. H. LEuNG, S. T. REVANKAR, Axial development of interfacial area and void con-
Y. IsHi and M. Isuu centration profiles measured by double-sensor probe
method
vi Volume Contents
H. KAZEMINEJAD 455 Analysis of one-dimensional fin assembly heat trans-
fer with dehumidification
C. T. KirRANoupis, Z.B. MAROULIS 463 Heat and mass transfer model building in drying with
and D. MARINOS-KOURIS multiresponse data
G. KOCAMUSTAFAOGULLARI and 481 Foundation of the interfacial area transport equation
M. IsHi and its closure relations
J. X. ZHu, M. FIEBIG and Numerical investigation of turbulent flows and heat
N. K. MITRA transfer in a rib-roughened channel with longitudinal
vortex generators
Y. TAO, R. SAKIDJA and Computer simulation and flow visualization of thermo-
S. Kou capillary flow in a silicone oil floating zone
T. D. FADALE, A. V.N ENAROKOMOV Uncertainties in parameter estimation: the inverse
and A. F. EMERY problem
A. M. MoreGa, A. BEJAN and Free stream cooling of a stack of parallel plates
S. W. LEE
G. TANDA Experiments on natural convection from two staggered
vertical plates
G. S. ROMANOV, Thermodynamic and optical properties of gases in
Yu. A. STANKEVICH, a wide range of parameters
L. K. STANCHITsS and K. L. STEPANOV
J. MIKIELEWICz and A. M. A. RAGEB Simple theoretical approach to direct-contact conden-
sation on subcooled liquid film
A. ZMITROWICZ Constitutive models for anisotropic frictional heat
Book Review
N. C. MARKATOS Energy Efficiency in Process Technology, by P. A.
PILAVACHI (Editor)
Announcement
Short courses on multiphase flow and heat transfer: (I) bases,
(IIA) water reactor applications, and (IIB) computational
modelling
March, Number 4
O. G. MARTYNENKO 579 Heat and mass transfer bibliography—CIS works
S. SAHA, G. V. TOMAROV and 593 Experimental investigation into the flow of liquid
O. A. POVAROV film under saturated steam condition on a vibrating
surface
A. GupTA, J. S. SAINI and Boiling heat transfer in small horizontal tube bundles
H. K. VARMA at low cross-flow velocities
Volume Contents Vii
S. K. BANERJI, K. SIVASANKARAN, 607 Finite-element method analysis of interaction effects
K. N. SEETHARAMU and for vaporising cylinders arranged in triangular con-
R. NATARAJAN figurations
M. S. CuITTI and N. K. ANAND An analytical model for local heat transfer coefficients
for forced convective condensation inside smooth
horizontal tubes
C. O. GERSEY and I. MUDAWAR Effects of heater length and orientation on the trigger
mechanism for near-saturated flow boiling critical
heat flux—I. Photographic study and statistical
characterization of the near-wall interfacial features
C. O. GERSEY and I. MUDAWAR Effects of heater length and orientation on the trigger
mechanism for near-saturated flow boiling critical
heat flux—II. Critical heat flux model
D. M. MANOLE and J. L. LAGE Thermodynamic optimization method ofa triple effect
absorption system with wasted heat recovery
W. M. YAN and C. Y. SOONG Simultaneously developing mixed convection in
radially rotating rectangular ducts
L. Y. COOPER The interaction of an isolated sprinkler spray and a
two-layer compartment fire environment
. J. NASSIF, W. S. JANNA and Mass transfer from a sublimating naphthalene flat
. 5. JAKUBOWSKI plate to a parallel flow of air
C. I. HUNG, W. SHyy and Transient natural convection and conjugate heat
H. OUYANG transfer in a crystal growth device
W.-M. YAN Effects of film vaporization on turbulent mixed con-
vection heat and mass transfe: in a vertical channel
F. N. LIsIN and G. HETSRONI Spectrum of temperature fluctuations in high-
temperature turbulent gas—particle flow
Yu. A. BUYEVICH and Interaction of a dilute mist flow with a hot body
V. N. MANKEVICH
Technical Notes
Monb. KaMIL, S. S. ALAM and Prediction of circulation rates in vertical tube thermosiphon
H. ALI reboiler
H.-T. Lin and W.-T. CHENG Rigorous solution of unsteady forced convection heat
transfer
S.-H. Kana, K.-H. HonG and A unified correlation of laminar convective heat transfer
S. KAUH from hot and cold circular cylinders in a uniform air flow
X. F. PENG and G. P. PETERSON The effect of thermofluid and geometrical parameters on
convection of liquids through rectangular microchannels
R. D. BoyD and X. MENG Boiling curve correlation for subcooled flow boiling
A. NAKAYAMA and M. A. HossAIN An integral treatment for combined heat and mass transfer
by natural convection in a porous medium
Volume Contents
March, Number 5
A. J. FOWLER and A. BEJAN 767 Forced convection from a surface covered with
flexible fibers
T. D. KARAPANTSIOS, Local condensation rates of steam—air mixtures in
M. KOSsTOGLOU and direct contact with a falling liquid film
A. J. KARABELAS
T. D. KARAPANTSIOS and Direct-contact condensation in the presence of non-
A. J. KARABELAS condensables over free-falling films with intermittent
liquid feed
J. M. GorDON and K. C. NG Predictive and diagnostic aspects of a universal
thermodynamic model for chillers
A. BENARD and S. G. ADVANI Energy equation and the crystallization kinetics of
semi-crystalline polymers: regimes of coupling
C. T. CHANG, G. KoJAsoy, Confined single- and multiple-jet impingement heat
F. LANDIs and S. DOWNING transfer—I. Turbulent submerged liquid jets
C. T. CHANG, G. KoJasoy, Confined single- and multiple-jet impingement heat
F. LANDIS and S. DOWNING transfer—II. Turbulent two-phase flow
G. YANG, Z. F. DONG and Laminar forced convection in a helicoidal pipe with
M. A. EBADIAN finite pitch
J. D. BERNARDIN and Validation of the quench factor technique in predicting
I. MUDAWAR hardness in heat treatable aluminum alloys
M. T. OUAZZANI, J. K. PLATTEN, Etude de la convection mixte entre deux plans hori-
H. W. MOLLER and M. LUCKE zontaux 4 températures différentes—III
L. E. LAGcos, W. LI, Heat transfer within a concrete slab with a finite
M. A. EBADIAN, T. L. WHITE, microwave heating source
R. G. GRuBB and D. FosTER
D. S. GERENCSER and A. RAZANI Optimization of radiative—convective arrays of pin
fins including mutual irradiation between fins
R. MEI, W. CHEN and Vapor bubble growth in heterogeneous boiling—I.
J. F. KLAUSNER Formulation
R. MEi, W. CHEN and Vapor bubble growth in heterogeneous boiling—II.
J. F. KLAUSNER Growth rate and thermal fields
S. K. Rastoai and Double-diffusion from a vertical surface in a porous
D. POULIKAKOS region saturated with a non-Newtonian fluid
M. K. EL-ADAwI, Laser heating of a two-layer system with constant
M. A. ABDEL-NABY and surface absorption: an exact solution
S. A. SHALABY
Volume Contents
April, Number 6
M. OULD-Rouls, A. SALEM, 953 Etude numérique et expérimentale des transferts de
J. LEGRAND et C. NOUAR matiére et de quantité de mouvement dans un
écoulement annulaire laminaire non établi
T. KUMADA, H. SAKASHITA Pool boiling heat transfer—I. Measurement and semi-
and H. YAMAGISHI empirical relations of detachment frequencies of
coalesced bubbles
T. KUMADA and H. SAKASHITA Pool boiling heat transfer—II. Thickness of liquid
macrolayer formed beneath vapor masses
B. BOESMANS and J. BERGHMANS Level swell in pool boiling with liquid circulation
C.-J. Kim and S. T. Ro A block-correction aided strongly implicit solver for
the five-point formulation of elliptic differential
equations
V. R. VOLLER and S. SUNDARRAJ A model of inverse segregation: the role of
microporosity
Cc. H. Huana, T. M. Ju and The estimation of surface thermal behavior of the
A. A. Ts working roll in hot rolling process
M. IzuMI and K. HAYAKAWA Heat and moisture transfer and hygrostress crack
formation and propagation in cylindrical, elastoplastic
food
S. Hu and K. E. HEROLD Prandtl number effect on offset fin heat exchanger
performance: predictive model for heat transfer and
pressure drop
S. Hu and K. E. HEROLD Prandtl number effect on offset fin heat exchanger
performance: experimental results
M. M. GANZAROLLI and Natural convection in rectangular enclosures heated
L. F. MILANEZ from below and symmetrically cooled from the sides
M. MartTIN, P. PERRE et M. MosER_ 1075 La perte de température a travers la charge: intérét
pour le pilotage d’un séchoir a bois 4 haute température
R. A. KUYPER The heat flow rate in symmetrical two-dimensional
conduction problems
J.-S. LEu and J.-Y. JANG The natural convection from a point heat source
embedded in a non-Darcian porous medium
R. GREGER and H. J. RATH Measurement of the thermal conductivity of fluids
with low viscosity under reduced gravity conditions
using the transient hot-wire technique
G. P. CELATA, M. Cumo, The prediction of the critical heat flux in water-
A. MARIANI and G. ZUMMO subcooled flow boiling
x Volume Contents
R. YANG and D. Jou 1121 Heat and mass transfer of absorption process for the
falling film flow inside a porous medium
S. K. Das and W. ROETZEL 1127 Dynamic analysis of plate heat exchangers with
dispersion in both fluids
May, Number 7
J. TANNY 1141 Experimental study on the crystallization of a binary
melt at the vertical boundary of an enclosure
J. A. Parsons, J.-C. HAN and 1151 Effect of model orientation and wall heating condition
Y. ZHANG on local heat transfer in a rotating two-pass square
channel with rib turbulators
S. PAIK and H. D. NGUYEN Numerical modeling of multiphase plasma/soil flow
and heat transfer in an electric arc furnace
Y. ITayA, T. KOBAYASHI and Three-dimensional heat and mass transfer with
K. HAYAKAWA viscoelastic strain—stress formation in composite food
during drying
P. Y. Nizou et T. TIDA Transferts de chaleur et de quantité de mouvement
dans les jets pariétaux plans turbulents
D. D. HALL and I. MUDAWAR Experimental and numerical study of quenching
complex-shaped metallic alloys with multiple,
overlapping sprays
Z. H. FANG, J. R. GRACE and Local particle convective heat transfer along surfaces
C. J. Liv in circulating fluidized beds
J. M. CHol and N. K. ANAND Turbulent heat transfer in a serpentine channel with a
series of right-angle turns
S. L. LEE and R. Y. TZONG Latent heat method for solidification process of a
binary alloy system
E. ScCHRODER and K. BUHLER Three-dimensional convection in rectangular domains
with horizontal throughflow
W.-M. YAN and C.-Y. SOONG Convective heat and mass transfer along an inclined
heated plate with film evaporation
J. Ni and F. P. INCROPERA Extension of the continuum model for transport
phenomena occurring during metal alloy solidi-
fication—I. The conservation equations
J. Ni and F. P. INCROPERA Extension of the continuum model for transport
phenomena occurring during metal alloy solidi-
fication—II. Microscopic considerations
Z.-X. GONG and A. S. MUJUMDAR The influence of an impermeable surface on pore
steam pressure during drying of refractory concrete
slabs