Table Of Content

INTERNATIONAL JOURNAL OF CLOTHING SCIENCE AND TECHNOLOGY Volume 3, 1991 AUTHOR AND TITLE INDEX A N AMIRBAYAT, J. and McLAREN MILLER, J., Order NIWA, M., see AYADA, M. of Magnitude of Compressive Energy of Seams and NIWA, M., see KAWABATA, S. its Effect on Seam Pucker NIWA, M. and YAMADA, Y., Prediction of Seam ARKISON, M., see CASSIDY, T. Pucker of Shingosen Fabrics Woven with Micro Automatic Sponging: Development of a Computer- Denier Fibres Aided System Controlled by Fabric Objective Data, ITO, K. 0 AYADA, M., MIKI, M. and NIWA, M., Discriminating Objective Measurement of Fabric Mechanical Property the Silhouette of Ladies’ Garments Based on the and Quality: Its Application to Textile and Clothing Fabric Mechanical Properties Manufacturing, KAWABATA, S., and NIWA, M. Order of Magnitude of Compressive Energy of Seams Cc and its Effect on Seam Pucker, AMIRBAYAT, J. and CASSIDY, S., see CASSIDY, T. McLAREN MILLER, J. CASSIDY, T., CASSIDY, S., CASSIE, S. and ARKISON, M., The Stiffness of Knitted Fabrics: A P New Approach to the Measurement of Bending — PARGAS, R.P. see PECK, J.C. Part 1: Development Pattern Construction Rules for Down’s Syndrome CASSIE, S., see CASSIDY, T. Females, TAM WONG HUNG YEH, (TAM, H.) 25 YBWVsWSw mnea cdst PECK, J.C. PARGAS, R.P., KHAMBEKAR, P.K. and D DHARMARAJ, S.K., Shopfloor Performance DHARMARA, J.S.K. see PECK, J.C. Metrics for the Apparel Industry 19 Discrete-Event Simulation of Trouser Manufacturing, Perception of Fabrics: A Texturalcentric Study of the ROSSER, P.S., SOMMERFELD, JT. and TINCHER, WC. Visual and Tactile Responses of Adult and Elderly Women, LAUGHLIN, J. 20 Discriminating the Silhouette of Ladies’ Garments Based on the Fabric Mechanical Properties, AYADA, Perception of Texture, Visually and Tactually: An m©WPmyY m, =’ M., MIKI, M. and NIWA, M. AEnxapllyosriast,o rLy ASUtGuHdyL IUNs,in g J.M ultidimensional Scaling 28 Tr F Prediction of Seam Pucker of Shingosen Fabrics Woven FAN, J. and KEIGHLEY, J.H., An Investigation on the with Micro Denier Fibres, NIWA, M. and YAMADA, Effects of Body Motion, Clothing Design and x Environmental Conditions on the Clothing Thermal R Insulation by Using a Fabric Manikin (The) Feasibility of Improving the Marker Making Reduction in Thread Strength as a Cause of Loading Process, JACOBS-BLECHA, C. and RIALL, W. in the Sewing Process, GERSAK, J. and KNEZ, B. RIALL, W., see JACOBS-BLECHA, C. 6 ROSSER, P.S., SOMMERFELD, JT. and TINCHER, GERSAK, J. and KNEZ, B., Reduction in Thread W.C., Discrete-Event Simulation of Trouser Strength and a Cause of Loading in the Sewing Manufacturing Process $ i Seam Pucker in Lightweight Synthetic Fabrics: (An) Investigation on the Effects of Body Motion, Measurement as an Aesthetic Property Using *D*oY=F=|,D,O— TO Clothing Design and Environmental Conditions on Computer Vision, STYLIOS, G., and SOTOMI, J. the Clothing Thermal Insulation by Using a Fabric SHIMMIN, C., see MONKMAN, G.J. Manikin, FAN, J. and KEIGHLEY, J.H. Shopfloor Performance Metrics for the Apparel Industry, PECK, J.C., PARGAS, R.P., J JACOBS-BLECHA, C. and RIALL, W., The Feasibility KHAMBEKAR, P.K. and DHARMARAYJ, S.K. SOMMERFELD, JT., see ROSSER, P.S. of Improving the Marker Making Process SOTOMI, J., see STYLIOS, G. K (The) Stiffness of Knitted Fabrics: A New Approach KAWABATA, S. and NIWA, M., Objective to the Measurement of Bending — Part 1: Measurement of Fabric Mechanical Property and Development, CASSIDY, T., CASSIDY, C., CASSIE, Quality: Its Application to Textile and Clothing S. and ARKISON, M. Manufacturing STYLIOS, G. and SOTOMI, J., Seam Pucker in KEIGHLEY, J.M., see FAN, J. Lightweight Synthetic Fabrics: Measurement as an KHAMBEKAR, P.K., see PECK, J.C. Aesthetic Property Using Computer Vision KNEZ, B., see GERSAK, J. T L TAM WONG HUNG YEH., (TAM, H.) Pattern LAUGHLIN, J., Perception of Fabrics: A Construction Rules for Down’s Syndrome Females 25 Texturalcentric Study of the Visual and Tactile TINCHER, WC., see ROSSER, PS. Responses of Adult and Elderly Women 20 u M Use of Permanently Pressure-sensitive Chemical McLAREN MILLER, J., see AMIRBAYAT, J. Adhesives in Robot Gripping Devices; MONKMAN, MIKI, M., see AYADA, M. G.J. and SHIMMIN, C. MONKMAN, G.J. and SHIMMIN, C., Use of Permanently Pressure-sensitive Chemical Adhesive in Y Robot Gripping Devices YAMADA, Y., see NIWA, M. INTERNATIONAL JOURNAL OF CLOTHING SCIENCE AND TECHNOLOGY Volume 3, 1991 AUTHOR AND TITLE INDEX A N AMIRBAYAT, J. and McLAREN MILLER, J., Order NIWA, M., see AYADA, M. of Magnitude of Compressive Energy of Seams and NIWA, M., see KAWABATA, S. its Effect on Seam Pucker NIWA, M. and YAMADA, Y., Prediction of Seam ARKISON, M., see CASSIDY, T. Pucker of Shingosen Fabrics Woven with Micro Automatic Sponging: Development of a Computer- Denier Fibres Aided System Controlled by Fabric Objective Data, ITO, K. 0 AYADA, M., MIKI, M. and NIWA, M., Discriminating Objective Measurement of Fabric Mechanical Property the Silhouette of Ladies’ Garments Based on the and Quality: Its Application to Textile and Clothing Fabric Mechanical Properties Manufacturing, KAWABATA, S., and NIWA, M. Order of Magnitude of Compressive Energy of Seams Cc and its Effect on Seam Pucker, AMIRBAYAT, J. and CASSIDY, S., see CASSIDY, T. McLAREN MILLER, J. CASSIDY, T., CASSIDY, S., CASSIE, S. and ARKISON, M., The Stiffness of Knitted Fabrics: A P New Approach to the Measurement of Bending — PARGAS, R.P. see PECK, J.C. Part 1: Development Pattern Construction Rules for Down’s Syndrome CASSIE, S., see CASSIDY, T. Females, TAM WONG HUNG YEH, (TAM, H.) 25 YBWVsWSw mnea cdst PECK, J.C. PARGAS, R.P., KHAMBEKAR, P.K. and D DHARMARAJ, S.K., Shopfloor Performance DHARMARA, J.S.K. see PECK, J.C. Metrics for the Apparel Industry 19 Discrete-Event Simulation of Trouser Manufacturing, Perception of Fabrics: A Texturalcentric Study of the ROSSER, P.S., SOMMERFELD, JT. and TINCHER, WC. Visual and Tactile Responses of Adult and Elderly Women, LAUGHLIN, J. 20 Discriminating the Silhouette of Ladies’ Garments Based on the Fabric Mechanical Properties, AYADA, Perception of Texture, Visually and Tactually: An m©WPmyY m, =’ M., MIKI, M. and NIWA, M. AEnxapllyosriast,o rLy ASUtGuHdyL IUNs,in g J.M ultidimensional Scaling 28 Tr F Prediction of Seam Pucker of Shingosen Fabrics Woven FAN, J. and KEIGHLEY, J.H., An Investigation on the with Micro Denier Fibres, NIWA, M. and YAMADA, Effects of Body Motion, Clothing Design and x Environmental Conditions on the Clothing Thermal R Insulation by Using a Fabric Manikin (The) Feasibility of Improving the Marker Making Reduction in Thread Strength as a Cause of Loading Process, JACOBS-BLECHA, C. and RIALL, W. in the Sewing Process, GERSAK, J. and KNEZ, B. RIALL, W., see JACOBS-BLECHA, C. 6 ROSSER, P.S., SOMMERFELD, JT. and TINCHER, GERSAK, J. and KNEZ, B., Reduction in Thread W.C., Discrete-Event Simulation of Trouser Strength and a Cause of Loading in the Sewing Manufacturing Process $ i Seam Pucker in Lightweight Synthetic Fabrics: (An) Investigation on the Effects of Body Motion, Measurement as an Aesthetic Property Using *D*oY=F=|,D,O— TO Clothing Design and Environmental Conditions on Computer Vision, STYLIOS, G., and SOTOMI, J. the Clothing Thermal Insulation by Using a Fabric SHIMMIN, C., see MONKMAN, G.J. Manikin, FAN, J. and KEIGHLEY, J.H. Shopfloor Performance Metrics for the Apparel Industry, PECK, J.C., PARGAS, R.P., J JACOBS-BLECHA, C. and RIALL, W., The Feasibility KHAMBEKAR, P.K. and DHARMARAYJ, S.K. SOMMERFELD, JT., see ROSSER, P.S. of Improving the Marker Making Process SOTOMI, J., see STYLIOS, G. K (The) Stiffness of Knitted Fabrics: A New Approach KAWABATA, S. and NIWA, M., Objective to the Measurement of Bending — Part 1: Measurement of Fabric Mechanical Property and Development, CASSIDY, T., CASSIDY, C., CASSIE, Quality: Its Application to Textile and Clothing S. and ARKISON, M. Manufacturing STYLIOS, G. and SOTOMI, J., Seam Pucker in KEIGHLEY, J.M., see FAN, J. Lightweight Synthetic Fabrics: Measurement as an KHAMBEKAR, P.K., see PECK, J.C. Aesthetic Property Using Computer Vision KNEZ, B., see GERSAK, J. T L TAM WONG HUNG YEH., (TAM, H.) Pattern LAUGHLIN, J., Perception of Fabrics: A Construction Rules for Down’s Syndrome Females 25 Texturalcentric Study of the Visual and Tactile TINCHER, WC., see ROSSER, PS. Responses of Adult and Elderly Women 20 u M Use of Permanently Pressure-sensitive Chemical McLAREN MILLER, J., see AMIRBAYAT, J. Adhesives in Robot Gripping Devices; MONKMAN, MIKI, M., see AYADA, M. G.J. and SHIMMIN, C. MONKMAN, G.J. and SHIMMIN, C., Use of Permanently Pressure-sensitive Chemical Adhesive in Y Robot Gripping Devices YAMADA, Y., see NIWA, M. NOTES FOR CONTRIBUTORS Contributions are welcome and should be sent to the these will be re-drawn and re-lettered by the studio. Editor. The address is on the inside front cover. Please keep them simple and indicate the precise points through which a line must pass — if necessary by COPYRIGHT INFRINGEMENT giving co-ordinates. In the text the position of the figure should be shown by typing on a separate line the Authors submitting articles for publication warrant that words “take in Figure 1” etc. the work is not an infringement of any existing Tables These should be typed on a separate sheet of copyright and will indemnify the publisher against any paper and numbered consecutively and independently breach of such warranty. of any figures included in the article. Each table should have a number in roman numerals, a brief title, and EDITORIAL OBJECTIVES vertical and horizontal headings. In the text the @ To promote the science and technology of clothing position of the table should be shown by typing on a by publishing academic and industrial research separate line the words “take in Table I” etc. findings. Emphasis Words to be emphasised should be @ To provide a forum for the dissemination and underlined: they will appear in italics in the journal. Please limit the number of emphasised words. The use exchange of information on clothing research. of capital letters should be kept to proper nouns and PREPARATION OF ARTICLES AND the names of official bodies. Inverted commas should be used for direct quotations only. MONOGRAPHS Acknowledgements The author should indicate if Length Articles should be between 4,000 and 5,000 his/her paper has been presented elsewhere. If he/she words long although shorter contributions can be does not do so, the Editor will assume that the paper is an original contribution. Papers appearing in the considered. Journal should not be published elsewhere without the Outline Before beginning detailed work on your article, written consent of the Publisher of the Journal. it would be helpful to agree its outline with the Editor. Abstracts Authors are requested to supply an abstract Title Please suggest a title of not more than eight of about 150 words when submitting an article. It words. should be an abbreviated, accurate representation of the Autobiographical Note A brief autobiographical note contents of the article. Major results, conclusions should be supplied, including full name, appointment, and/or recommendations should be given, followed by supporting details of method, scope or purpose, as and name of organisation. necessary. It should contain sufficient information to Typing Please submit three copies of the article, typed enable readers to decide whether they should obtain in double-spacing and leaving wide margins. North and read the entire article. American authors should submit five copies. Keywords Authors should also provide 1-6 keywords or Introduction Please include with the article an descriptors that clearly describe the subject matter of introductory paragraph of 100 words. This should the article. These terms have two purposes: to help begin with a simple sentence noting the author’s describe the subject content of an article to prospective present appointment and organisation, followed by a readers; to index the article for retrieval from a summary of the article’s main points. database or bibliography. Such keywords might include: @ Country, geographical area, e.g. Africa, Sweden, Headings, occurring approximately every 750 words, Developing Countries should be typed in capitals and underlined. Sub- @ Industry, e.g. Banking, Aircraft Industry headings should be typed in upper and lower case and @ Organisation/organisation-related, e.g. Small underlined. Headings should not be numbered. Business, Multinational, Corporate Image Footnotes, used as sparingly as possible, should be @ People, e.g. Consultants, Trainers, Top numbered consecutively and listed at the end of the Management article. References to other publications should be @ Broad Functions, e.g. Marketing, Production typed as follows: Management @ Specific Functions, e.g. Sales Promotion, (a) References to articles Scheduling The author’s name (Surname followed by initials @ Management and Managerial Activities, e.g. of first names); title of the article (in quotation Matrix Management, Policy Making, Decision marks); name of the publication in which it Making appears (underlined); volume and issue number; @ Other processes and subject areas, Industrial date of publication; beginning and ending page Relations, Economics, Politics, Quantitative numbers. Methods, Research. Example: Blanding, W., “The Hidden Eleven Costs Not all of these aspects will be applicable to a of Customer Service’, Transportation and particular article. Some articles will require more terms Distribution Management, Vol. 14 No. 4, July- than others. August 1974, pp. 6-10. THE REVIEWING PROCESS (b) References to books or reports The author’s name (Surname followed by initials Each paper submitted to JJCST is subject to the of first names); title of the book (underlined); following review procedures: name of publisher; year of publication; page (1) It is reviewed by the editor for general suitability numbers where appropriate.: for this publication. Example: Schumacher, E.F., Small is Beautiful, (2)I f it is judged suitable two reviewers are selected Blond and Briggs, 1973, p. 22. and a double blind review process takes place. (3) Based on the recommendations of the reviewers, All References must be numbered in the text in the the editor then decides whether the particular order 1, 2, 3...etc. article should be accepted as it is, revised or Figures Please number charts consecutively, referring to rejected. them as “Figure 1” etc. Each figure should have a The process described above is a general one. The number in arabic numerals, a brief title in capitals and editor, however, may, in some circumstances,-.vary this labelled axes. Where rough diagrams are submitted, process at his discretion.