Table Of Content

INTERNATIONAL JOURNAL OF ADHEG6ION and Cldhestver Published by Butterworth-Heinemann Ltd © 1992 Butterworth-Heinemann Ltd Index to Volume 12 (1992) No 1 (January) pp 1-64 No 2 (April) pp 64-128 No 3 (July) pp 129-216 No 4 (October) pp 217-288 Author Index Bolon, R.B. see Stein, J., 111 Denton, M.F. see Abbott, S.G., 2 Bowditch, M.R., Hiscock, D. and Dodiuk, H. see Wasserman, S., 25 Abbott, $.G. and Denton, M.F. Moth, D.A. Catalytic combustion of solvent The role of the substrate in the Edde, F. and Verreman, Y. vapours from adhesives, 211 hydrolytic stability of adhesive joints, On the fracture parameters in a Adams, R.D., Coppendale, J., 164 clamped cracked lap shear adhesive Mallick, V. and Al-Hamdan, H. joint, 43 The effect of temperature on the Carciello, N.R. see Sugama, T., 27 Ellis, M.B.D., Andrews, P.R. and strength of adhesive joints, 185 Cernilec, N. see Malavasi, T., 38 Crompton, J.S. Al-Hamdan, H. see Adams, R.D.. Chattopadhyay, S. and Banerjee, In situ straining of epoxy adhesives, 185 ALN. 95 Andrews, P.R. see Ellis, M.B.D., 95 Adhesion study of vinylchloride- Enyiegbulam, M.E. Arrowsmith, D.J.. Moth, D.A. and vinylacetate-maleic acid terpolymer, Acid-base interactions: adhesion and Rose, S.P. nitrocellulose blends, 105 the elimination of cavities in the The enhancement of adhesive joint Cherry, B.W. and Ye, Y.Q. production of synthetic marble, 117 strength by extending the surface of The behaviour of high-temperature anodized aluminium, 67 anaerobic adhesives, 206 Fay, P.A. see Harris, J.A., 9 Atkins, R.W. see Tod, D.A., 159 Chester, R.J. see Baker, A.A., 73 Chui, W.K. and Jones, R. Ghosh, T.B. see Bhattacharya, T.., Baker, A.A. and Chester, R.J. A numerical study of adhesively 233 Minimum surface treatments for bonded lap joints, 219 Grenoble, M.E. see Stein, J.. 111 adhesively bonded repairs, 73 Cohen, Y. see Scherf, J., 251 Banerjee, A.N. see Chattopadhyay, Comyn, J. Halbo, L. see Bjorneklett, A., 99 S.. 105 Contact angles and adhesive bonding, Harding, L.M. see Comyn, J., 263 Bhattacharya, T., Ghosh, T.B. and 145 Harris, J.A. and Fay, P.A. De, S.K. Comyn, J., Blackley, D.C. and Fatigue life evaluation of structural Durability studies of aluminium Harding, L.M. adhesives for automotive applications, 9 aiuminium joints bonded by Surface analysis of emulsion adhesives Harvey, W.J. see Su, N., 85 chlorobutyl rubber-carboxylated nitrile by fast atom bombardment mass Hiscock, D. see Bowditch, M.R., 164 rubber and epicholohydrin rubber- spectrometry and X-ray photoelectron Howlonia, B.P. carboxylated nitrile rubber blends, 233 spectroscopy, 263 Comparison of peel test and Bishopp, J.A. Conley, K. see Ritter, J.E., 245 holographic NDT method for water The chemistry and properties of a new Coppendale, J. see Adams, R.D., 185 ingress into metal joints, 241 generation of toughened epoxy Crompton, J.S. see Ellis, M.B.D., 95 Hutchinson, A.R. see Lees, D.E., 197 matrices, 178 Crouch, I.G. see Stuart, T.P., 3 Bjorneklett, A., Halbo, L. and Jones, R. see Chui, W.K., 219 Kristiansen, H. De, S.K. see Bhattacharya, T., 233 Thermal conductivity of epoxy De Neve, B. and Shanahan, M.E.R. Kamusewitz, H. see Possart, W., 49 adhesives filled with silver particles, 99 Effects of humidity on an epoxy Kemp, T.J. see Wilford, A., 171 Blackley, D.C. see Comyn, J., 263 adhesive, 191 Kenig, S. see Wasserman, S., 257 INT.J.ADHESION AND ADHESIVES OCTOBER 1992 285 Kotzev, D. and Kotzev, V. Shanahan, M.E.R. see De Neve, B.. Adhesive-bonded joints Novel uses of cyanoacrylate adhesives 19] Joint design, Interlock joints, 3 — polycyanoacrylate foams, 150 Shaw, S.J. see Tod, D.A., 159 Structural adhesives, Fatigue Kotzev, V. see Kotzev, D., 150 Shen, S.B. see Ong, C.-L., 19 behaviour, 9 Kristiansen, H. see Bjorneklett, A., 99 Shen, S.B. see Ong, C.-L., 79 Polyphenyletheretherketone, Kumar, D. see Narain, N.P., 271 Shu, W.-Y. see Ong, C.-L., 79 Steels, 27 Stein, J., Bolon, R.B., Porta, M.L.. Cracked lap shear specimen, Lamm, F.P. see Pike, R.A., 227 Robertson, C.D. and Grenoble, Adhesive stresses, 43 Lee, T.C.P. see Wilford, A., 171 M.E. Joint strength, Durability, 159 Lees, D.E. and Hutchinson, A.R. Scanning and environmental electron Water exposure, Adherend Mechanical characteristics of some microscopy studies of silicone release adhesive interface, 164 cold-cured structural adhesives, 197 coatings, 111 Surface pretreatment, Plasma- Lin, T.D. see Wightman, J.P., 133 Stuart, T.P. and Crouch, LG. sprayed coatings, 227 Ludbrook, B.D. and Whitwood, R_J. The design, testing and evaluation of Strength loss, Water ingress, 241 The use of thermal analysis to adhesively bonded, interlocking. Adhesive bonding investigate the cure of reactive tapered joints between thick Composite patches, Fatigue adhesives, 138 aluminium alloy plates, 3 testing, 19 Su, N.. Mackie, R.I. and Harvey, Aluminium, Durability, 67 Mackie, R.I. see Su, N., 85 WJ. Surface treatment, Primer, 73 Malavasi¢, T., Cernilec, N.. Mirgeva., The effects of ageing and environment Field repair, Surface treatment, A. and Osredkar, U. on the fatigue life of adhesive joints, 85 79 Synthesis and adhesive properties of Sugama, T., Carciello, N.R. and Adhesively-bonded joints some polyurethane dispersions, 38 Miura, M. Joint strength, Temperature, 185 Mallick, V. see Adams, R.D., 185 Adhesion of crystalline Adhesive joints Miréeva, A. see MalavaSi¢, T., 38 polyphenyletheretherketone (PEEK) in Durability, Fatigue, 85 Miura, M. see Sugama, T., 27 metal-to-metal joints, 27 Adhesives Moth, D.A. see Arrowsmith, D_J., 67 Lap-shear test, Load-carrying Moth, D.A. see Bowditch, M.R., 164 Tod, D.A., Atkins, R.W. and Shaw, capacity, 219 S.J. Crack growth, Environmental Narain, N.P. and Kumar, D. Use of primers to enhance adhesive exposure, 245 Adhesives produced by reactions of bonds, 159 Phosphorus halides, Phenols, phosphorus halides with phenols and 271 bisphenols, 27\ Verreman, Y. see Edde, F., 43 Adhesive stresses Adhesive-bonded joints, Cracked Ong, C.-L. and Shen, S.B. Wagner, H.D. see Scherf, J., 251 lap shear specimen, 43 The reinforcing effect of composite Wasserman, S., Dodiuk, H. and Aluminium patch repairs on metallic aircraft Kenig, S. Adhesive bonding, Durability, 67 structures, 19 Shear creep behaviour of elastomeric Anaerobic adhesives Ong, C.-L., Shu, W.-Y. and Shen, S.B. adhesives, 257 Cure mechanism, Bond strength, The evaluation of non-tank surface Webster, H.F. see Wightman, J.P. 206 treatments for aluminium bonding 133 repairs, 79 Whitwood, R.J. see Ludbrook, B.D.. Blend synergy Osredkar, U. see MalavaSié, T., 38 138 Toughened epoxies, Wightman, J.P., Lin, T.D. and Polyurethane modifier, 178 Patarini, V.M. see Pike, R.A., 227 Webster, H.F. Bond strength Pike, R.A., Patarini, V.M., Zatorski, Surface chemical aspects of polymer, Anaerobic adhesives, Cure R. and Lamm, F.P. metal adhesion, 133 mechanism, 206 Plasma-sprayed coatings as adherend Wilford, A.. Lee, T.C.P. and Kemp, Bulk properties surface pretreatments, 227 TZ. Environmental ageing, Joint Porta, M.L. see Stein, J., 111 Phase separation of polysulphide strength, 191] Possart, W. and Kamusewitz, H. polymers in epoxy adhesives, \7\ Some thermodynamic considerations concerning the usual interpretation of Ye, Y.Q. see Cherry, B.W., 206 Carboxylated nitrile rubber wetting on solids, 49 Chlorobutyl rubber, Zatorski, R. see Pike, R.A., 227 Epichlorohydrin rubber, 233 Ritter, J.E. and Conley, K. Catalytic combustion Moisture-assisted crack propagation at Solvent vapours, Footwear, 211 polymer/glass interfaces, 245 Cavities Robertson, C.D. see Stein, J.. 111 Synthetic marble, Acid-base Keyword Index Rose, S.P. see Arrowsmith, DJ., 67 interactions, 117 Chlorobuty! rubber Scherf, J.. Cohen, Y. and Wagner, Acid-base interactions Carboxylated nitrile rubber, H.D. Synthetic marble, Cavities, 117 Epichlorohydrin rubber, 233 Interfacial strength measurements in Adherend/adhesive interface Coatings poly(p-phenylene benzobisthiazole) Adhesive-bonded joints, Water Surface treatment, Polymer epoxy composites, 251 exposure, 164 blends. 105 286 INT.JADHESION AND ADHESIVES OCTOBER 1992 Composite patches Fatigue testing Moisture Adhesive bonding, Fatigue Adhesive bonding, Composite Mechanical characterization, testing, 19 patches, 19 Temperature, 197 Contact angles Field repair Thermodynamics, Surface free Adhesive bonding, Surface Phase separation energies, 145 treatment, 79 Epoxy, Polysulphide, 171 Cracked lap shear specimen Filler particles Phenols Adhesive-bonded joints, Fracture stress, /n situ straining, Adhesives, Phosphorus halides, Adhesive stresses, 43 95 27 Crack growth Foaming optimization Phosphorus halides Adhesives, Environmental Polycyanoacrylates, Foams, 150 Adhesives, Phenols, 271 exposure, 245 Foams Plasma-sprayed coatings Creep Polycyanoacrylates, Foaming Adhesive-bonded joints, Surface Elastomeric adhesives, Shear optimization, 150 pretreatment, 227 loading, 257 Footwear Polycyanoacrylates Cross-linking Solvent vapours, Catalytic Foams, Foaming optimization, Polyurethane dispersions, combustion, 211 150 Formulation, 38 Formulation Polymer blends Cure mechanism Polyurethane dispersions, Cross- Coatings, Surface treatment, 105 Anaerobic adhesives, Bond linking, 38 Polyphenyletheretherketone strength, 206 Fracture stress Adhesive-bonded joints, Steels, Filler particles, /n situ straining, 27 Degree of cure 95 Polysulphide Thermal analysis, Glass Fragmentation test Epoxy, Phase separation, 171 transition temperature, 138 Interfacial shear strength, Polyurethane dispersions Droplet micropull-out test Fragmentation test, 251 Formulation, Cross-linking, 38 Interfacial shear strength, Polyurethane modifier Fragmentation test, 25] Glass transition temperature Toughened epoxies, Blend Durability Thermal analysis, Degree of synergy, 178 Adhesive bonding, Aluminium, cure, 138 Primer 67 Adhesive bonding, Surface Adhesive joints, Fatigue, 85 In situ straining treatment, 73 Adhesive-bonded joints, Joint Filler particles, Fracture stress, strength, 159 95 Interfacial shear strength Segregation Elastomeric adhesives Droplet micropull-out test, Thin polymer films, Surface Creep, Shear loading, 257 Fragmentation, 251 pretreatment, 133 Emulsion adhesives Interfacial tension Shear loading Surface analysis, Fast atom Wetting, Thermodynamics, 49 Elastomeric adhesives, Creep, bombardment mass 257 Interlock joints spectrometry, 253 Silicone release coatings Adhesive-bonded joints, Joint Environmental ageing design, 3 Environmental scanning electron Bulk properties, Joint strength, microscopy, UV curable 191 silicones, 111 Joint design Environmental exposure Silver-filled epoxy adhesive Adhesive-bonded joints, Adhesives, Crack growth, 245 Metal/polymer composite, Interlock joints, 3 Environmental scanning electron Thermal conductivity, 99 Joint strength microscropy Solvent vapours Adhesive-bonded joints, Silicone release coatings, UV Catalytic combustion, Footwear, Durability, 159 curable silicones, 111 211 Adhesively-bonded joints, Epichlorohydrin rubber Steels Temperature, 185 Chlorobutyl rubber, Adhesive-bonded joints, Environmental ageing, Bulk Carboxylated nitrile rubber, 233 Polyphenyletheretherketone, 27 properties, 191 Epoxy Strength loss Polysulphide, Phase separation, Adhesive-bonded joints, Water 171 Lap-shear test ingress, 24] Adhesives, Load-carrying Structural adhesives Fast atom bombardment mass capacity, 219 Adhesive-bonded joints, Fatigue spectrometry Load-carrying capacity behaviour, 9 Emulsion adhesives, Surface Adhesives, Lap-shear test, 219 Surface analysis analysis, 263 Emulsion adhesives, Fast atom Fatigue Mechanical characterization bombardment mass Adhesive joints, Durability, 85 Temperature, Moisture, 197 spectrometry, 263 Fatigue behaviour Metal/polymer composite Surface free energies Structural adhesives, Adhesive- Silver-filled epoxy adhesive, Thermodynamics, Contact bonded joints, 9 Thermal conductivity, 99 angles, 145 INT.J.ADHESION AND ADHESIVES OCTOBER 1992 287 Surface pretreatment Thermal conductivity Water ingress Thin polymer films, Segregation, Metal/polymer composite, Silver- Adhesive-bonded joints, Strength 133 filled epoxy adhesive, 99 loss, 241 Adhesive-bonded joints, Plasma- Thermodynamics Wetting sprayed coatings, 227 Wetting, Interfacial tension, 49 Thermodynamics, Interfacial Surface treatment Surface free energies, Contact tension, 49 Adhesive bonding, Primer, 73 angles, 145 Adhesive bonding, Field repair, Thin polymer films 79 Surface pretreatment, Coatings, Polymer blends, 105 Segregation, 133 Book Reviews Synthetic marble Toughened epoxies 57, 123, 278 Acid-base interactions, Cavities, Polyurethane modifier, Blend 117 synergy, 178 Temperature UV curable silicones Calendar Adhesively-bonded joints, Joint Silicone release coatings, strength, 185 Environmental scanning electron 64, 128, 215, 283 Mechanical characterization, microscopy, I11 Moisture, 197 Thermal analysis Water exposure Conference Reports Degree of cure, Glass transition Adhesive-bonded joints, temperature, 138 Adherend/adhesive interface, 164 55, 121, 275 288 INT.J.ADHESION AND ADHESIVES OCTOBER 1992