Intelligent materials, applied mechanics and design science : selected, peer reviewed papers from the 2011 international conference on intelligent materials, applied mechanics and design science, (IMAMD 2011), December 24-25, Beijing, China

262 Pages·2012·27.92 MB·English

by  Helen Zhang

Intelligent Materials,
Applied Mechanics
and
Design Science
Edited by
Helen Zhang
David Jin
Intelligent Materials, Applied
Mechanics and Design Science
Selected, peer reviewed papers from the
2011 International Conference on
Intelligent Materials, Applied Mechanics
and Design Science,
(IMAMD2011),
December 24-25, Beijing China
Edited by
Helen Zhang and David Jin
Copyright  2012 Trans Tech Publications Ltd, Switzerland

All rights reserved. No part of the contents of this publication may be reproduced or
transmitted in any form or by any means without the written permission of the
publisher.

Trans Tech Publications Ltd
Kreuzstrasse 10
CH-8635 Durnten-Zurich
Switzerland
http://www.ttp.net

Volume 142 of
Applied Mechanics and Materials
ISSN 1662-7490
Full text available online at http://www.scientific.net

Distributed worldwide by and in the Americas by
Trans Tech Publications Ltd Trans Tech Publications Inc.
Kreuzstrasse 10 PO Box 699, May Street
CH-8635 Durnten-Zurich Enfield, NH 03748
Switzerland USA
Phone: [phone]
Fax: [phone] Fax: [phone]
e-mail: [email protected] e-mail: [email protected]
Preface

International Science& Education Researcher Association（ISER) is an non-profit public
organization made up of some educators, some education-researchers, some academic exchanging
scholars and some project-researchers willingly around the world. The association puts her focus on
studying and exchanging academic achievements of international teaching and scientific research,
and she also promotes education reform in the world. In addition, she serves herself on academic
discussion and communication too,which is beneficial for education and scientific research. Thus it
will stimulate the research interests of all researchers to stir up academic resonance.

IMAMD2011 is a comprehensive conference,and it is an integrated conference concentrating its
focus upon Intelligent Materials,Applied Mechanics and Design Science. In the proceeding, you can
learn much more knowledge about Intelligent Materials,Applied Mechanics and Design Science of
researchers all around the world. The main role of the proceeding is to be used as an exchange pillar
for researchers who are working in the mentioned field. In order to meet high standard of Applied
Mechanics and Materials,the organization committee has made their efforts to do the following
things. Firstly, poor quality paper has been refused after reviewing course by anonymous referee
experts. Secondly, periodically review meetings have been held around the reviewers about five
times for exchanging reviewing suggestions. Finally, the conference organization had several
preliminary sessions before the conference. Through efforts of different people and departments, the
conference will be successful and fruitful.

IMAMD2011 is co-sponsored by International Science & Education Researcher Association,
Beijing Gireida Education Research Center and VIP-Information Conference Center,China. The
goal of the conference is to provide researchers from Intelligent Materials,Applied Mechanics and
Design Science fields with a free exchanging forum to share the new ideas, new innovation and
solutions with each other. In addition, the conference organizer will invite some famous keynote
speaker to deliver their speech in the conference. All participants will have chance to discuss with
the speakers face to face, which is very helpful for participants.

During the organization course, we have got help from different people, different departments,
different institutions. Here, we would like to show our first sincere thanks to Mr. Thomas
Wohlbier,Anne and Trans Tech Publications for their kind and enthusiastic help and support for our
conference. Secondly, the authors should be thanked too for their enthusiastic writing attitudes
toward their papers. Thirdly, all members of program chairs, reviewers and program committees
should also be appreciated for their hard work.

In a word, it is the different team efforts that they make our conference be successful on December
24-25, Beijing China. We hope that all of participants can give us good suggestions to improve our
working efficiency and service in the future. And we also hope to get your supporting all the way.
Next year, In 2012, we look forward to seeing all of you at IMAMD 2012.
September, 2011
IMAMD committee
Committee
Honor Chairs
Prof. Chen Bin, Beijing Normal University,China
Prof. Hu Chen, Peking University,China
Chunhua Tan, Beijing Normal University,China
Helen Zhang, University of Munich,China

Program Committee Chairs
Xiong Huang, International Science& Education Researcher Association,China
LiDing, International Science& Education Researcher Association,China
Zhihua Xu, International Science& Education Researcher Association,China

Organizing Chair
ZongMing Tu, Beijing Gireida Education Co.Ltd,China
Jijun Wang, Beijing Spon Technology Research Institution,China
Quanxiang, Beijing Prophet Science and Education Research Center,China

Publication Chair
Zhihua Xu, International Science& Education Researcher Association,China
Sally Wang, Beijing Normal University,China

Committee
Sally Wang, Beijing normal university,China
LiLi, Dongguan University of Technology,China
BingXiao, Anhui university,China
Z. L. Wang, Wuhan university,China
Moon Seho,Hoseo University,Korea
Kongel Arearak,Suranaree University of Technology,Thailand
Zhihua Xu, International Science& Education Researcher Association,China
Xiangrong Jiang, Wuhan University of Technology,China
LiHu, Linguistic and Linguidtic Education Association,China
Moon Hyan,Sungkyunkwan University, Korea
Guangwen, South China University of Technology,China
Jack.H. Li, George Mason University, USA
Marry. Y. Feng, University of Technology Sydney, Australia
Li Hu, Wuhan University of Science and Technology, China,
ZhongYan, Wuhan University of Science and Technology, China
Haiquan Huang, Hubei University of Technology,China
Xiao Bing, WUhan University, China
Brown Wu, Sun Yat-Sen University, China

Co-sponsored by
International Science& Education Researcher Association, China
Beijing Gireida Education Research Center
VIP-Information Conference Center,China
Table of Contents
Preface and Committee
Chapter 1: Intelligent Materials, Energy Science and Dynamic System
Gear Fault Diagnoise Based on Ensemble Empirical Mode Decomposition and
Instantaneous Energy Density Spectrum
J.M. Lu, F.L. Meng, H. Shen, L.B. Ding and S.N. Bao 3
Numerical Analysis of Nonlinear Behaviors of a Flexible Rotor Dynamic System with
Turbulent Journal Bearings Support
Y.J. Lu, Y.F. Zhang, X.Y. Ma and X. Liu 7
Dynamic Path Planning Algorithm Based on Chaos Genetic Vehicle Navigation
P. Feng 12
The Hybrid Genetic Algorithm of Single-Machine Materials Manufacturing Process with
Periodic Maintenance
X.Y. Yu, Z.Y. Rao and H. Zhu 16
The Improved Design of Some Shrunk Super High Pressure Cylinder Based on Equal
Strength Theory
Y.X. Zhang, L.F. Wang and F. Yao 20
Design of Ultra-High Pressure Cylinders Based on Principle of Autofrettage
Y.X. Zhang, F. Yao and X.S. Men 24
The High Resolution Lunar Planet DEM Based on the Altimetry Data of 400-Circle CE-1
Laser Altimeter (2B)
J.P. Chen, H.L. Liu and M. Guo 28
Effect of Ammonium and Nitrate Ratios on Growth and Yield of Chinese Kale
S.W. Song, G.X. Liao, H.C. Liu, G.W. Sun and R.Y. Chen 32
Effect of the Nitrogen Nutrient on Pigments of Flower Stalk in Chinese Kale
R.Y. Chen, S.W. Song, C.Z. Song, H.C. Liu, G.W. Sun and D.F. Huang 37
Process Parameters Optimization on Ultrahigh Pressure Extraction of Pesticide Residues in
Vegetables
Z.M. Xu and Y.J. Sun 42
Impact Analysis of Ultrahigh Pressure Treatment Pesticide Residues in Vegetables on near
Infrared Spectroscopy Detection
Z.M. Xu and Y.J. Sun 46
Investigation of Solidification Characteristics of Resin for Integral Stereolithography
System
G.S. Xu, G. Yang, J. Gong and J. Yang 50
Simulation and Analysis of Optimization Process Parameters for Multi-Cavity Injection
Molding Parts Warpage by Genetic Algorithm Method
W.J. Chen 54
Study on the Panel Fabrication for the Field Emission Display with Symmetrical Electrode
Stripe
Y.X. Ma 58
Fabrication and Properties of Short-Stripe Insulation Wall in a FED Panel
Y.X. Ma 62
The Design and Realization of Automation Stamping Machine System
L.W. Yan, T.F. Li, W. Li and L.N. Zhao 66
Analysis and Achievement of the Leak Detection of High Vacuum System on Magnetron
Sputtering Equipment
J.C. Feng, S.H. Huang and M. Su 71
Stress Analysis and Modal Analysis of Robot Manipulator
W.C. Zhang, J. Chen, B.H. Pei, B.B. Ma and X.B. Du 75
Study of Vice-Steering Control System for Training Car
W.C. Zhang, B.B. Ma, X.B. Du, B.H. Pei and J. Chen 79
b Intelligent Materials, Applied Mechanics and Design Science
The New Progress of Cadmium Sulfide Synthesis
Y.H. Zhang and Q. Wang 83
Microstructure and Properties of Zirconia-Mullite Nanocomposites Obtained from Si-Al-
Zr-O Amorphous Bulks Doped with CaO and MgO
X.P. Tan, S.Q. Liang and L.Y. Chai 87
Chapter 2: Intelligent Materials, Design Science and Applied Mechanics
Optimization for Heat Treatment Process of Supercritical Material F92Steel
J.S. Ding, L.X. Liu and J.C. Feng 95
Design of Automatic Assembly Tire Machine
Z.Y. Yang and H. Li 99
The Comparative Trail Research on the Performance of a Diesel Engine Fuelled with Diesel
Fuel and Biodiesel/Diesel Blended Fuel
W.M. Cheng, H. Xie and G. Li 103
Non-Linear Dynamic Stability of Shallow Reticulated Spherical Shells
M.J. Han, Y.T. Li, P. Qiu and X.Z. Wang 107
Effect of Calcium Nutrient on Calcium Distribution and Ultrastructure of Cell and
Chloroplast in Bunching Onion Leaf
H.C. Liu, W.P. Liu, S.W. Song, G.W. Sun and R.Y. Chen 111
Effect of Water Stress Induced by PEG on Growth and Quality of Bunching Onion
D.Z. Dong, H.C. Liu, S.W. Song, G.W. Sun and R.Y. Chen 116
C13 NMR Spectrum Analysis of Perfluoro Polyethers (PFPE) of Fluorocarbon-Based
Magnetic Fluid’s Base Liquid
H.C. Cui, D.C. Li and P. Liu 120
Strain Sensing Behaviour of PPy-Coated XLA Fibers
P. Xue, J.P. Wang and X.M. Tao 125
Calculation for Equivalent Nodal Force of Prestress in 20 Nodes Isoparametric Element
H. Yang, N. Li and B.S. Xu 129
Surface Modification Induced by Femtosecond Laser Pulses in Lithium Niobate
H.Y. Chen, Z.Z. Wan and Y.L. Han 134
Investigation on Stress Field near Crack-Tip of Mode I in Shape Memory Alloy
B. Zhou, X.G. Guo, G.L. Hou and X.K. Li 138
Building Materials Effects of Al Content and Physical Properties on the Electromagnetic
Interference Shielding of Sn Based Coating Thin Layers
F.S. Hung, F.Y. Hung, C.M. Chiang and T.S. Lui 142
Effect of Temperature on Starch Accumulation and Activities of Starch Synthetic Key
Enzymes during Grain-Filling Stage of Aromatic Rice
Z.J. Xu, L.Z. Xiao, H. Liu, Y.H. Ren and Z.L. Li 152
Performance Evaluation of Epoxy Asphalt and Study of Epoxy Asphalt Used on Deck
Surfacing of Concrete Bridge
Y.C. Li, P. Zhang, R. Lv, Y.Z. Xu and G.J. Hou 157
Reduction Feature and Selection Principle of Chromium Ore for Stainless Steelmaking in a
Smelting Reduction Converter
Y. Liu, M.F. Jiang and D.Y. Wang 161
Study on the Advanced Treatment Secondary Effluent of WWTPs by Coagulation
Y. Liu, F.X. Li and C.P. Zhang 165
The Connection Properties of Rubber Asphalt Waterproofing Adhesive Layer in Bridge
Deck Pavement
Y.L. Li and Y.Q. Tan 169
Chapter 3: Biological Materials, Applied Mechanics and Chemical
Engineering
Effect of Biological Organic Fertilizer on Plant Growth and Yield of Chinese Kale
S.W. Song, H.D. Li, R.Y. Chen, G.W. Sun and H.C. Liu 175
Helen Zhang and David Jin c
Study on Denoising of Corrosion Acoustic Emission Signals of Tank Bottom Based on
Independent Component Analysis
Y. Yu and J. Zhao 180
Interface Fracture Criterion Based on Molecular Dynamics Simulation
Z. Yang 184
Effect of Ammonium and Nitrate Ratio on Nutritional Quality of Flowering Chinese
Cabbage
S.W. Song, L.Y. Yi, H.C. Liu, G.W. Sun and R.Y. Chen 188
The Fracturing Behavior of Detected Rock under Blasting Loads
C. Wang, Z.M. Zhu and T. Zheng 193
The Photoelastic Analysis of Stress Intensity Factor for Cracks around a Tunnel
M. Wang, Z.M. Zhu and J.H. Liu 197
Research on the Fracture Mechanism of Coal with Three Collinear Cracks Filling with Gas
W.C. Jin, Z.M. Zhu and Z.Y. Hu 201
A Contrastive Study on LiMn O Prepared by Solution Combustion Synthesis Using Nitrate
2 4
or Acetate Salts as Raw Materials
G.Y. Liu, J.M. Guo, L.L. Zhang, B.S. Wang and Y. He 205
Al Doped LiMn O Prepared by a Solution Combustion Synthesis Using Acetate Salts as
2 4
Raw Materials and Acetic Acid as Fuel
G.Y. Liu, J.M. Guo, L.L. Zhang, B.S. Wang and Y. He 209
LiMn O Prepared by a Flameless Solution Combustion Synthesis: The Effect of Ignition
2 4
Temperature
G.Y. Liu, J.M. Guo, Y.N. Li, B.S. Wang and Y. He 213
Experimental Investigation of Mechanical Behavior of Carbon-Nanotube Reinforced
Cement Mortar
L.W. Chang, J.C. Yue and Y.Z. Sun 217
Modified Activated Carbon for Gas Phase Synthesis of Dimethyl Carbonate
R. Li 221
CH and H Quantum Chemical Study of Reaction Mechanisms
3 2
R. Li and X.Y. Liu 225
A Hybrid Way for Optimizing Magnesium Matrix Composites Preparing Method
J.X. Ye and F.Y. Zhang 229
Effects of Different Stocking Densities on Growth, Serum Steroid Hormone Concentrations,
Gonadosomatic Index and Sex Reversal in the Rice Field Eel, Monopterus albus (Zuiew)
H.W. Yuan, F. Chen, Q.Q. Xu, S.Y. Gong, Z.J. Chu and D.Q. Yang 233
Effects of Exogenous Melatonin on Serum Steroid Hormones, GSI, Survival Ratio and Sex
Reversal in Rice Field Eel, (Monopterus albus)
H.W. Yuan, F. Chen, Q.Q. Xu, S.Y. Gong, D.H. Yu and D.Q. Yang 238
The Stability of Unsaturated Soil Foundation Pit Reinforced with the Cement-Mixed Sheet
Pile Wall
R.J. Li, H. Duan, W. Zheng and H.T. Li 243
Spartina alterniflora: Potential Bio-Energy Source for Biofuel Production in China
R.L. Li and G.Y. Qiu 247
CHAPTER 1:

Intelligent Materials, Energy Science and Dynamic
System