IIE Transactions 1992: Vol 24 Index

9 Pages·1992·1.9 MB·English

AUTHOR INDEX
Agogino, Alice M., Ori Nour-Omid, Wayne Imaino, and Sher- ulation on Highly Integrated Circuit Systems; November;
man S. Wang; Decision-Analytic Methodology for Cost- p. 33.
Benefit Evaluation of Diagnostic Testers; March; p. 39. Cranmer, L., L. F. McGinnis, J. C. Ammons, M. Carlyle,
Albin, Susan L. and David J. Friedman; Off-Line Quality Con- G. W. Depuy, K. P. Ellis, C. A.T ovey, and H. Xu; Auto-
trol in Electronics Assembly: Identifying the Critical Prob- mated Process Planning for Printed Circuit Card Assembly;
lem; November; p. 58. September; p. 18.
Ali, M. Masoom, Dale Umbach and A.K. Md. E. Saleh; Es-
timating Life Functions of Chi Distribution Using Selected David, H. T., R. S. Zakaria, and Way Kuo; A Counter-
Order Statistics; November; p. 88. Intuitive Aspect of Component Importance in Linear
Alwan, Layth C. and Darrell Radson; Time-Series Investiga- Consecutive-k-Out-of-n Systems; November; p. 147.
tion of Subsample Mean Charts; November; p. 66. Deleersnyder, Jean-Luc, Thom J. Hodgson, Russell E. King,
Ammons, J. C., L. F. McGinnis, M. Carlyle, L. Cranmer, Peter J. O’Grady, and Andreas Savva; Integrating Kanban
G. W. Depuy, K. P. Ellis, C. A. Tovey, and H. Xu; Auto- Type Pull Systems and MRP Type Push Systems: Insights
mated Process Planning for Printed Circuit Card Assembly; from a Markovian Model; July; p. 43.
September; p. 18. Depuy, G. W., L. F. McGinnis, J. C.A mmons, M. Carlyle,
Anderson, Evan E. and Yu-Min Chen; A Simultaneous Equa- L. Cranmer, K. P. Ellis, C. A. Tovey, and H. Xu; Auto-
tion Model of Cost/Performance Relationships in Large Scale mated Process Planning for Printed Circuit Card Assembly;
Computing; November; p. 155. September; p. 18.
Arnwine, William C. and Elinor S. Pape; Time Unit Models Dietrich, Duane and Elsayed Elsayed; Quality Control and
for Work Measurement Audits; March; p. 70. Its Application in Production Systems; November; p. 2.
Arnwine, William C., Elinor S. Pape, and Rita Casavantes; Drury, Colin G., Thomas B. Morawski, and Mark H. Kar-
Adjustment of Time Standard Audit Values for MIL-STD- wan; The Optimum Speed of Visual Inspection Using a Ran-
1567A; May; p. 153. dom Search Strategy; November; p. 122.
Arora, Sant and Sameer Kumar; Effects of Inventory Miscount Duenyas, Izak and Wallace J. Hopp; CONWIP Assembly with
and Non-Inclusion of Lead Time Variability on Inventory Deterministic Processing and Random Outages; September;
System Performance; May; p. 96. p. 97.
Aull-Hyde, Rhonda L.; Evaluation of Supplier-Restricted Pur-
chasing Options Under Temporary Price Discounts; May; Ellis, K. P., L. F. McGinnis, J. C.A mmons, M. Carlyle,
p. 184. L. Cranmer, G. W. Depuy, C. A. Tovey, and H. Xu; Auto-
mated Process Planning for Printed Circuit Card Assembly;
Banks, Jerry and S. Manivannan; Design of a Knowledge- September; p. 18.
Based On-Line Simulation System to Control a Manufactur- Elsayed, Elsayed and Duane Dietrich; Quality Control and
ing Shop Floor; July; p. 72. Its Application in Production Systems; November; p. 2.
Barber, James S. and Kenneth R. Gehner; Age-and-Test Pro-
cedures for True Reliability Improvement: Feasibility and Feldman, Richard M. and Ciriaco Valdez-Flores; An Improved
Economic Justification; November; p. 81. Policy Iteration Algorithm for Semi-Markov Maintenance
Bard, Jonathan F.; A Comparison of the Analytic Hierarchy Problems; March; p. 55.
Process with Multiattribute Utility Theory: A Case Study; Fowler, John and Wilbert E. Wilhelm; Research Directions
November; p. 111. in Electronics Manufacturing; September; p. 6.
Bhuskute, Hemant C., Joe H. Mize, David B. Pratt, and Man- Fowler, John W., Gary L. Hogg, and Don T. Phillips; Con-
junath Kamath; Modeling of Integrated Manufacturing Sys- trol of Multiproduct Bulk Service Diffusion/Oxidation Proc-
tems Using an Object-Oriented Approach; July; p. 14. esses; September; p. 84.
Butler, Timothy W., Kirk R. Karwan, James R. Sweigart, Friedman, David J. and Susan L. Albin; Off-Line Quality Con-
and Gary R. Reeves; An Integrative Model-Based Approach trol in Electronics Assembly: Identifying the Critical Prob-
to Hospital Layout; May; p. 144. lem; November; p. 58.
Carlyle, M., L. F. McGinnis, J. C. Ammons, L. Cranmer, Gehner, Kenneth R. and James S. Barber; Age-and-Test Pro-
G. W. Depuy, K. P. Ellis, C. A. Tovey, and H. Xu; Auto- cedures for True Reliability Improvement: Feasibility and
mated Process Planning for Printed Circuit Card Assembly; Economic Justification; November; p. 81.
September; p. 18. Gerchak, Yigal and Xin Zhang; The Effect of Initial Inven-
Carmon, Tali F. and Robert C. Leachman; On Capacity Mod- tories in a Two-Echelon System; March; p. 64.
eling for Production Planning with Alternative Machine Glassey, C. Roger, Yushin Hong, and Deokhyun Seong; The
Types; September; p. 62. Analysis of a Production Line with Unreliable Machines
Casavantes, Rita, Elinor S. Pape, and William C. Arnwine; and Random Processing Times; March; p. 77.
Adjustment of Time Standard Audit Values for MIL-STD- Golhar, Damodar Y. and Stephen M. Pollock; Cost Savings
1567A; May; p. 153. Due to Variance Reduction in a Canning Process; March;
Chaffin, D. B., K. S. Lee, and C. Parks; A Study of Slip Po- p. 89.
tential During Cart Pushing and Pulling; November; p. 139. Grotzinger, Stephen; Feeder Assignment Models for Concur-
Chen, Yu-Min and Evan E. Anderson; A Simultaneous Equa- rent Placement Machines; September; p. 31.
tion Model of Cost/Performance Relationships in Large Scale
Computing; November; p. 155. Hall, Randolph W.; Price Changes and Order Quantities: Im-
Chien, Wei-Ting Kary and Way Kuo; Optimal Burn-In Sim- pacts of Discount Rate and Storage Costs; May; p. 104.
November 1992, IIE Transactions, Volume 24, Number 5 0740-817X/92/$3.00x.00 © 1992 “‘ITE’’ 181
Hill, Arthur V., Salvatore T. March, Christopher J. Nacht- Types; September; p. 62.
sheim, and Murali S. Shanker; An Approximate Model for Lee, Chung-Yee, Reha Uzsoy, and Louis A. Martin-Vega;
Field Service Territory Planning; March; p. 2. A Review of Production Planning and Scheduling Models
Hodgson, Thom J., Jean-Luc Deleersnyder, Russell E. King, in the Semiconductor Industry Part I: System Characteris-
Peter J. O'Grady, and Andreas Savva; Integrating Kanban tics, Performance Evaluation and Production Planning; Sep-
Type Pull Systems and MRP Type Push Systems: Insights tember; p. 47.
from a Markovian Model; July; p. 43. Lee, K. S., D. B. Chaffin, and C. Parks; A Study oSfl ip Po-
Hogg, Gary L., John W. Fowler, and Don T. Phillips; Con- tential During Cart Pushing and Pulling; November; p. 139.
trol of Multiproduct Bulk Service Diffusion/Oxidation Proc- Lin, Grace Yuh-Jiun and James J. Solberg; Integrated Shop
esses; September; p. 84. Floor Control Using Autonomous Agents; July; p. 57.
Hong, Yushin, C. Roger Glassey, and Deokhyun Seong; The Lingayat, Sunil and Wan S. Shin; Design of Acceptance Sam-
Analysis of a Production Line with Unreliable Machines pling Plans Under Varying Inspection Error; May; p. 111.
and Random Processing Times; March; p. 77. Little, John D. C.; Tautologies, Models and Theories: Can
Hopp, Wallace J. and Izaak Duenyas; CONWIP Assembly with We Find ‘‘Laws’’ of Manufacturing? ; July; p. 7.
Deterministic Processing and Random Outages; September;
p. 97. Madu, Christian N. and Chu-Hua Kuei; Simulation Meta-
models of System Availability and Optimum Spare and Re-
Imaino, Wayne, Alice M. Agogino, Ori Nour-Omid, and Sher- pair Units; November; p. 99.
man S. Wang; Decision-Analytic Methodology for Cost- Manivannan, S. and Jerry Banks; Design of a Knowledge-
Benefit Evaluation of Diagnostic Testers; March; p. 39. Based On-Line Simulation System to Control a Manufactur-
ing Shop Floor; July; p. 72.
Joshi, Sanjay B., Erik G. Mettala, and Richard A. Wysk; March, Salvatore T., Arhtur V. Hill, Christopher J. Nacht-
CIMGEN-A Computer Aided Software Engineering Tool for sheim, and Murali S. Shanker; An Approximate Model for
Development of FMS Control Software; July; p. 84. Field Service Territory Planning; March; p. 2.
Martin-Vega, Louis A.; Special Report from NSF: Design and
Kacha, Pierre and Colin Moodie; Task Decomposition in Cut- Manufacturing: An NSF Perspective; July; p. 98.
O'f Dimensioning: A Frame-Based Model; March; p. 11. Martin-Vega, Louis A., Reha Uzscy, and Chung-Yee Lee;
Kamath, Manjunath, Joe H. Mize, Hemant C. Bhuskute, and A Review of Production Planning and Scheduling Models
David B. Pratt; Modeling of Integrated Manufacturing Sys- in the Semiconductor Industry Part I: System Characteris-
tems Using an Object-Oriented Approach; July; p. 14. tics, Performance Evaluation and Production Planning; Sep-
Karwan, Kirk R., Timothy W. Butler, James R. Sweigart, tember; p. 47.
and Gary R. Reeves; An Integrative Model-Based Approach McGinnis, L. F., J. C.A mmons, M. Carlyle, L. Cranmer,
to Hospital Layout; May; p. 144. G. W. Depuy, K. P. Ellis, C. A. Tovey, and H. Xu; Auto-
Karwan, Mark H., Thomas B. Morawski, and Colin G. Drury; mated Process Planning for Printed Circuit Card Assembly;
The Optimum Speed of Visual Inspection Using a Random September; p. 18.
Search Strategy; November; p. 122. Mettala, Erik G., Sanjay B. Joshi, and Richard A. Wysk;
Kettani, Ossama, Muhittin Oral and Reha Yolalan; An Em- CIMGEN-A Computer Aided Software Engineering Tool for
pirical Study on Analyzing the Productivity of Bank Development of FMS Control Software; July; p. 84.
Branches; November; p. 166. Miltenburg, John and Gordon Sinnamon; Algorithms for Sched-
King, Russell E., Jean-Luc Deleersnyder, Thom J. Hodgson, uling Multi-Level Just-In-Time Production Systems; May;
Peter J. O'Grady, and Andreas Savva; Integrating Kanban p. 121.
Type Pull Systems and MRP Type Push Systems: Insights Mize, Joe H., Hemant C. Bhuskute, David B. Pratt, and Man-
from a Markovian Model; July; p. 43. junath Kamath; Modeling of Integrated Manufacturing Sys-
Kiran, Ali S. and Ali Tamer Unal; Batch Sequencing; Sep- tems Using an Object-Oriented Approach; July; p. 14.
tember; p. 73. Montgomery, Douglas C.; The Use of Statistical Process Con-
Kroemer, K. H. E.; Work Schedules and Body Rhythms; trol and Design of Experiments in Product and Process Im-
March; p. 26 provement; November; p. 4.
Kropp, Dean H. and Meir J. Rosenblatt; The Single Period Moodie, Colin and Pierre Kacha; Task Decomposition in Cut-
Stochastic Plant Layout Problem; May; p. 169. Off Dimensioning: A Frame-Based Model; March; p. 11.
Kuei, Chu-Hua and Christian N. Madu; Simulation Meta- Morawski, Thomas B., Colin G. Drury, and Mark H. Kar-
models of System Availability and Optimum Spare and Re- wan; The Optimum Speed of Visual Inspection Using a Ran-
pair Units; November; p. 99. dom Search Strategy; November; p. 122.
Kumar, Sameer and Sant Arora; Effects of Inventory Miscount
and Non-Inclusion of Lead Time Variability on Inventory Nachtsheim, Christopher J., Arthur V. Hill, Salvatore T.
System Performance; May; p. 96. March, and Murali S. Shanker; An Approximate Model for
Kuo, Way and Wei-Ting Kary Chien; Optimal Burn-In Sim- Field Service Territory Planning; March; p. 2.
ulation on Highly Integrated Circuit Systems; November; Nof, Shimon Y. and Jason D. Papastavrou; Decision Integra-
p. 33. tion Fundamentals in Distributed Manufacturing Topologies;
Kuo, Way, R. S. Zakaria, and H. T. David; A Counter- July; p. 27.
Intuitive Aspect of Component Importance in Linear Nour-Omid, Ori, Alice M. Agogino, Wayne Imaino, and Sher-
Consecutive-k-Out-of-n Systems; November; p. 147. man S. Wang; Decision-Analytic Methodology for Cost-
Benefit Evaluation of Diagnostic Testers; March; p. 39.
Leachman, Robert C. and Tali F. Carmon; On Capacity Mod-
eling for Production Planning with Alternative Machine O’Grady, Peter J., Jean-Luc Deleersnyder, Thom J. Hodg-
182 IIE Transactions, November 1992
son, Russell E. King, and Andreas Savva; Integrating Kan- Shin, Wan S. and Sunil Lingayat; Design of Acceptance Sam-
ban Type Pull Systems and MRP Type Push Systems: Insights pling Plans Under Varying Inspection Error; May; p. 111.
from a Markovian Model; July; p. 43. Singpurwalla, Nozer; A Bayesian Perspective on Taguchi's
Oral, Muhittin, Ossama Kettani, and Reha Yolalan; An Em- Approach to Quality Engineering and Tolerance Design;
pirical Study on Analyzing the Productivity of Bank November; p. 18.
Branches; November; p. 166. Sinnamon, Gordon and John Miltenburg; Algorithms for Sched-
uling Multi-Level Just-In-Time Production Systems; May;
Papastavrou, Jason D. and Shimon Y. Nof; Decision Integra- p. 121.
tion Fundamentals in Distributed Manufacturing Topologies; Solberg, James J., Michael J. Shaw, and Tony C. Woo; Sys-
July; p. 27. tem Integration in Intelligent Manufacturing: An Introduc-
Pape, Elinor S. and William C. Arnwine; Time Unit Models tion; July; p. 2.
for Work Measurement Audits; March; p. 70. Solberg, James J. and Grace Yuh-Jiun Lin; Integrated Shop
Pape, Elinor S., William C. Arnwine, and Rita Casavantes; Floor Control Using Autonomous Agents; July; p. 57.
Adjustment of Time Standard Audit Values for MIL-STD- Suresh, Nallan C.; A Generalized Multimachine Replacement
1567A; May; p. 153. Model for Flexible Automation Investments; May; p. 131.
Pape, Elinor S.; A Model for Analysis of Work Sampling Sta- Sweigart, James R., Timothy W. Butler, Kirk R. Karwan,
tistics; November; p. 134. and Gary R. Reeves; An Integrative Model-Based Approach
Park, S., M. J. Shaw, and N. Raman; Intelligent Scheduling to Hospital Layout; May; p. 144.
with Machine Learning Capabilities: The Induction of Sched-
uling Knowledge; May; p. 156. Tovey, C. A., L. F. McGinnis, J. C. Ammons, M. Carlyle,
Parks, C., K. S. Lee, and D. B. Chaffin; A Study of Slip Po- L. Cranmer, G. W. Depuy, K. P. Ellis, and H. Xu; Auto-
tential During Cart Pushing and Pulling; November; p. 139. mated Process Planning for Printed Circuit Card Assembly;
Phillips, Don T., John W. Fowler, and Gary L. Hogg; Con- September; p. 18.
trol of Multiproduct Bulk Service Diffusion/Oxidation Proc- Tsui, Kwok-Leung; An Overview of Taguchi Method and
esses; September; p. 84. Newly Developed Statistical Methods for Robust Design;
Pollock, Stephen M. and Damodar Y. Golhar; Cost Savings November; p. 44.
Due to Variance Reduction in a Canning Process; March;
p. 89. Umbach, Dale, M. Masoom Ali and A. K. Md. E. Saleh;
Pratt, David B., Joe H. Mize, Hemant C. Bhuskute, and Man- Estimating Life Functions of Chi Distribution Using Selected
junath Kamath; Modeling of Integrated Manufacturing Sys- Order Statistics; November; p. 88.
tems Using an Object-Oriented Approach; July; p. 14. Unal, Ali Tamer and Ali S. Kiran; Batch Sequencing; Sep-
tember; p. 73.
Radson, Darrell and Layth C. Alwan; Time-Series Investiga- Uzsoy, Reha, Chung-Yee Lee, and Louis A. Martin-Vega;
tion of Subsample Mean Charts; November; p. 66. A Review of Production Planning and Scheduling Models
Raman, N., M. J. Shaw, and S. Park; Intelligent Scheduling in the Semiconductor Industry Part I: System Characteris-
with Machine Learning Capabilities: The Induction of Sched- tics, Performance Evaluation and Production Planning; Sep-
uling Knowledge; May; p. 156. tember; p. 47.
Reeves, Gary R., Timothy W. Butler, Kirk R. Karwan, and
James R. Sweigart; An Integrative Model-Based Approach Valdez-Flores, Ciriaco and Richard M. Feldman; An Improved
to Hospital Layout; May; p. 144. Policy Iteration Algorithm for Semi-Markov Maintenance
Rosenblatt, Meir J. and Dean H. Kropp; The Single Period Problems; March; p. 55.
Stochastic Plant Layout Problem; May; p. 169.
Wang, Hsu-Pin and Haiping Xu; Optimal Inventory Policy
Saleh, A. K. Md. E., M. Masoom Ali and Dale Umbach; for Perishable Items with Time Proportional Demand; No-
Estimating Life Functions of Chi Distribution Using Selected vember; p. 105.
Order Statistics; November; p. 88. Wang, Sherman S., Alice M. Agogino, Ori Nour-Omid, and
Savva, Andreas, Jean-Luc Deleersnyder, Thom J. Hodgson, Wayne Imaino; Decision-Analytic Methodology for Cost-
Russell E. King, and Peter J. O’Grady; Integrating Kan- Benefit Evaluation of Diagnostic Testers; March; p. 39.
ban Type Pull Systems and MRP Type Push Systems: In- Wilhelm, Wilbert E.; Scheduling and Logistics on Electron-
sights from a Markovian Model; July; p. 43. ics Manufacturing and Assembly: An Introduction; Sep-
Seifoddini, Hamid; Performance Evaluation of Hybrid Cells; tember; p. 2.
March; p. 84. Wilhelm, Wilbert E. and John Fowler; Research Directions
Seong, Deokhyun, Yushin Hong, and C. Roger Glassey; The in Electronics Manufacturing; September; p. 6.
Analysis of a Production Line with Unreliable Machines Woo, Tony C., Michael J. Shaw, and James J. Solberg; Sys-
and Random Processing Times; March; p. 77. tem Integration in Intelligent Manufacturing: An Introduc-
Shanker, Murali S., Arthur V. Hill, Salvatore T. March, and tion; July; p. 2.
Christopher J. Nachtsheim; An Approximate Model for Field Wysk, Richard A., Sanjay B. Joshi, and Erik G. Mettala;
Service Territory Planning; March; p. 2. CIMGEN-A Computer Aided Software Engineering Tool for
Shaw, M. J., S. Park, and N. Raman; /ntelligent Scheduling Development of FMS Control Software; July; p. 84.
with Machine Learning Capabilities: The Induction of Sched-
uling Knowledge; May; p. 156. Xu, H., L.F. McGinnis, J. C.A mmons, M. Carlyle, L. Cran-
Shaw, Michael J., James J. Solberg, and Tony C. Woo; Sys- mer, G. W. Depuy, K. P. Ellis, and C. A. Tovey; Auto-
tem Iniegration in Intelligent Manufacturing: An Introduc- mated Process Planning for Printed Circuit Card Assembly;
tion; July; p. 2. September; p. 18.
November 1992, ITE Transactions 183
Xu, Haiping and Hsu-Pin Wang; Optimal Inventory Policy pirical Study on Analyzing the Productivity of Bank
for Perishable Items with Time Proportional Demand; No- Branches; November; p. 166.
vember; p. 105
Zakaria, R. S., H. T. David, and Way Kuo; A Counter-
Yano, Candace A.; Optimizing Transportation Contracts to Intuitive Aspect of Component Importance in Linear
Support Just-In-Time Deliveries: The Case of One Contracted Consecutive-k-Out-of-n Systems; November; p. 147.
Truck per Shipment; May; p. 177. Zhang, Xin and Yigal Gerchak; The Effect of Initial Inven-
Yolalan, Reha, Muhittin Oral and Ossama Kettani; An Em- tories in a Two-Echelon System; March; p. 64.
IIE Transactions, November 1992
SUBJECT INDEX
0100 Costs 0904 Manufacturing
0103 Cost Estimating Scheduling and Logistics on Electronics Manufacturing
Decision-Analytic Methodology for Cost-Benefit Eval- and Assembly: An Introduction; Wilhelm, Wilbert E.;
uation of Diagnostic Testers; Agogino, Alice M., Ori September; p. 2.
Nour-Omid, Wayne Imaino, and Sherman S. Wang; Research Directions in Electronics Manufacturing; Wil-
March; p. 39. helm, Wilbert E. and John Fowler; September; p. 6.
Age-And-Test Procedures for True Reliability Improve- Off-Line Quality Control in Electronics Assembly: Identi-
ment: Feasibility and Economic Justification; Barber, fying the Critical Problem; Albin, Susan L. and
James S. and Kenneth R. Gehner; November; p. 81. David J. Friedman; November; p. 58.
A Simultaneous Equation Model of Cost/Performance Other
Relationships in Large Scale Computing; Anderson, An Empirical Study on Analyzing the Productivity of
Evan E. and Yu-Min Chen; November; p. 155. Bank Branches; Oral, Muhittin, Ossama Kettani, and
0104 Cost Reduction Programs Reha Yolalan; November; p. 166.
Cost Savings Due to Variance Reduction in a Canning
Process; Golhar, Damodar Y. and Stephen M. Pol- Management
lock; March; p. 89. Decision Making
An Approximate Model for Field Service Territory
0300 Engineering Economics Planning; Hill, Arthur V., Salvatore T. March,
0301 Cash Flow Analysis Christopher J. Nachtsheim, and Murali S. Shanker;
Price Changes and Order Quantities: Impacts of Dis- March; p. 2.
count Rate and Storage Costs; Hall, Randolph W.; Decision-Analytic Methodology for Cost-Benefit Eval-
May; p. 104. uation of Diagnostic Testers; Agogino, Alice M.,
A Simultaneous Equation Model of Cost/Performance Ori Nour-Omid, Wayne Imaino, and Sherman S.
Relationships in Large Scale Computing; Anderson, Wang; March; p. 39.
Evan E. and Yu-Min Chen; November; p. 155. Decision Integration Fundamentals in Distributed Manu-
0302 Equipment Replacement facturing Topologies; Papastavrou, Jason D. and
A Generalized Multimachine Replacement Model for Shimon Y. Nof; July; p. 27.
Flexible Automation Investments; Suresh, Nallan C.; A Bayesian Perspective on Taguchi’s Approach to Qual-
May; p. 131. ity Engineering and Tolerance Design; Singpurwalla,
Nozer D.; November; p. 18.
0400 Facilities Planning, Design A Comparison of the Analytic Hierarchy Process with
0405 Plant Layout Analysis Multiattribute Utility Theory: A Case Study; Bard,
An Integrative Model-Based Approach to Hospital Lay- Jonathan F.; November; p. 111.
out; Butler, Timothy W., Kirk R. Karwan, James R.
Sweigart, and Gary R. Reeves; May; p. 144. Methods Engineering
The Single Period Stochastic Plant Layout Problem; Manufacturing Engineering
Rosenblatt, Meir J. and Dean H. Kropp; May; p. 169. Task Decomposition in Cut-Off Dimensioning: A Frame-
Based Model; Kacha, Pierre and Colin Moodie;
0500 Functional Operations March; p. 11.
0504 Maintenance, Plant Engineering The Analysis of a Production Line with Unreliable Ma-
An Improved Policy Iteration Algorithm for Semi-Markov chines and Random Processing Times; Hong, Yushin,
Maintenance Problems; Valdez-Flores, Ciriaco and C. Roger Glassey, and Deokhyun Seong; March;
Richard M. Feldman; March; p. 55. p. 77.
Performance Evaluation of Hybrid Cells; Seifoddini,
0600 Human Engineering Hamid; March; p. 84.
0603 Ergonomics A Generalized Multimachine Replacement Model for
Work Schedules and Body Rhythms; Kroemer, K.H.E.; Flexible Automation Investments; Suresh, Nallan C.;
March; p. 26. May; p. 131.
A Study of Slip Potential During Cart Pushing and Intelligent Scheduling with Machine Learning Capa-
Pulling; Lee, K. S., D. B. Chaffin, and C. Parks; bilities: The Induction of Scheduling Knowledge;
November; p. 139. Shaw, M. J., S. Park, and N. Raman; May; p. 156.
0608 Safety and Health System Integration in Intelligent Manufacturing: An
A Study of Slip Potential During Cart Pushing and Introduction; Shaw, Michael J., James J. Solberg,
Pulling; Lee, K. S., D. B. Chaffin, and C. Parks; and Tony C. Woo; July; p. 2.
November; p. 139. Tautologies, Models and Theories: Can We Find
‘‘Laws’”’ of Manufacturing ?; Little, John D. C.; July;
0900 Industries ts -
0903 Health Care and Other Services Modeling of Integrated Manufacturing Systems Using
An Integrative Model-Based Approach to Hospital Lay- an Object-Oriented Approach; Mize, Joe H., Hemant
out; Butler, Timothy W., Kirk R. Karwan, James R. C. Bhuskute, David B. Pratt, and Manjunath Kamath;
Sweigart, and Gary R. Reeves; May; p. 144. July; p. 14.
November 1992, ITE Transactions 185
Decision Integration Fundamentals in Distributed Manu- The Optimum Speed of Visual Inspection Using a Ran-
acturing Topologies; Papastavrou, Jason D. and Shi- dom Search Strategy; Morawski, Thomas B., Colin
mon Y. Nof; July; p. 27. G. Drury, and Mark H. Karwan; November; p. 122.
Integrated Shop Floor Control Using Autonomous Programming: Linear, Nonlinear
Agents; Lin, Grace Yuh-Jiun and James J. Solberg; Design of Acceptance Sampling Plans Under Varying
July; p. 57. Inspection Error; Shin, Wan S. and Sunil Lingayat;
Design of a Knowledge-Based On-Line Simulation Sys- May; p. 111.
tem to Control a Manufacturing Shop Floor; Mani- An Integrative Model-Based Approach to Hospital Lay-
vannan, S. and Jerry Banks; July; p. 72. out; Butler, Timothy W., Kirk R. Karwan, James R.
CIMGEN-A Computer Aided Software Engineering Tool Sweigart, and Gary R. Reeves; May; p. 144.
for Development of FMS Control Software; Joshi, Feeder Assignment Models for Concurrent Placement
Sanjay B., Erik G. Mettala, and Richard A. Wysk; Machines; Grotzinger, Stephen; September; p. 31.
July; p. 84. Or. Capacity Modeling for Production Planning with
Design and Manufacturing: An NSF Perspective; Martin- Alternative Machine Types; Leachman, Robert C.
Vega, Louis A.; July; p. 98. and Tali F. Carmon; September; p. 62.
Automated Process Planning for Printed Circuit Card Optimal Burn-In Simulation on Highly Integrated Cir-
Assembly; McGinnis, L. F., J. C. Ammons, M. Car- cuit Systems; Chien, Wei-Ting Kary and Way Kuo;
lyle, L. Cranmer, G. W. Depuy, K. P. Ellis, C. A. November; p. 33.
Tovey, and H. Xu; September; p. 18. Regression Analysis
Feeder Assignment Models for Concurrent Placement Time Unit Models for Work Measurement Audits; Pape,
Machines; Grotzinger, Stephen; September; p. 31. Elinor S. and William C. Arnwine; March; p. 70.
A Review of Production Planning and Scheduling Mod- Simulation Metamodels of System Availability and Op-
els in the Semiconductor Industry Part I: System timum Spare and Repair Units; Madu, Christian N.
Characteristics, Performance Evaluation and Produc- and Chu-Hua Kuei; November; p. 99.
tion Planning; Uzsoy, Reha, Chung-Yee Lee, and Simulation/Games
Louis A. Martin-Vega; September; p. 47. An Approximate Model for Field Service Territory Plan-
CONWIP Assembly with Deterministic Processing and ning; Hill, Arthur V., Salvatore T. March, Chris-
Random Outages; Duenyas, Izak and Wallace J. topher J. Nachtsheim, and Murali S. Shanker; March;
Hopp; September; p. 97. p. 2.
The Analysis of a Production Line with Unreliable Ma-
Quantitative Methods chines and Random Processing Times; Hong, Yushin,
Mathematical Models C. Roger Glassey, and Deokhyun Seong; March;
An Approximate Model for Field Service Territory Plan- -. Fr.
ning; Hill, Arthur V., Salvatore T. March, Christo- An Integrative Model-Based Approach to Hospital Lay-
pher J. Nachtsheim, and Murali S. Shanker; March; out; Butler, Timothy W., Kirk R. Karwan, James
5 R. Sweigart, and Gary R. Reeves; May; p. 144.
The Effect of Initial Inventories in a Two-Echelon Sys- Modeling of Integrated Manufacturing Systems Using
tem; Gerchak, Yigal and Xin Zhang; March; p. 64. an Object-Oriented Approach; Mize, Joe H., Hemant
The Analysis of a Production Line with Unreliable Ma- C. Bhuskute, David B. Pratt, and Manjunath Kamath;
chines and Random Processing Times; Hong, Yushin, July; p. 14.
C. Roger Glassey, and Deokhyun Seong; March; Design of a Knowledge-Based On-Line Simulation Sys-
p. 77. tem to Control a Manufacturing Shop Floor; Mani-
Effects of Inventory Miscount and Non-Inclusion of Lead vannan, S. and Jerry Banks; July; p. 72.
Time Variability on Inventory System Performance; Control of Multiproduct Bulk Service Diffusion/Oxi-
Kumar, Sameer and Sant Arora; May; p. 96. dation Processes; Fowler, John W., Gary L. Hogg,
Algorithms for Scheduling Multi-Level Just-In-Time Pro- and Don T. Phillips; September; p. 84.
duction Systems; Miltenburg, John and Gordon Sin- CONWIP Assembly with Deterministic Processing and
namon; May; p. 121. Random Outages; Duenyas, Izak and Wallace J.
A Generalized Multimachine Replacement Model for Hopp; September; p. 97.
Flexible Automation Investments; Suresh, Nallan C.; Optimal Burn-In Simulation on Highly Integrated Cir-
May; p. 131. cuit Systems; Chien, Wei-Ting Kary and Way Kuo;
The Single Period Stochastic Plant Layout Problem; Ro- November; p. 33.
senblatt, Meir J. and Dean H. Kropp; May; p. 169. Simulation Metamodels of System Availability and Op-
Optimizing Transportation Contracts to Support Just- timum Spare and Repair Units; Madu, Christian N.
In-Time Deliveries: The Case of One Contracted Truck and Chu-Hua Kuei; November; p. 99.
per Shipment; Yano, Candace Arai; May; p. 177. Applied Probability
Batch Sequencing; Unal, Ali Tamer and Ali S. Kiran; An Approximate Model for Field Service Territory Plan-
September; p. 73. ning; Hill, Arthur V., Salvatore T. March, Chris-
Optimal Inventory Policy for Perishable Items with Time topher J. Nachtsheim, and Murali S. Shanker; March;
Proportional Demand; Xu, Haiping and Hsu-Pin p. 2.
Wang; November; p. 105. An Improved Policy Iteration Algorithm for Semi-Markov
A Comparison of the Analytic Hierarchy Process with Maintenance Problems; Valdez-Flores, Ciriaco and
Multiattribute Utility Theory: A Case Study; Bard, Richard M. Feldman; March; p. 55.
Jonathan F.; November; p. 111. Cost Savings Due to Variance Reduction in a Canning
IIE Transactions, November 1992
Process; Golhar, Damodar Y. and Stephen M. Pol- duction Systems; Miltenburg, John and Gordon Sin-
lock; March; p. 89. namon; May; p. 121.
Integrating Kanban Type Pull Systems and MRP Type Intelligent Scheduling with Machine Learning Capabil-
Push Systems: Insights from a Markovian Model; ities: The Induction of Scheduling Knowledge; Shaw,
Deleersnyder, Jean-Luc, Thom J. Hodgson, Russell M. J., S. Park, and N. Raman; May; 156.
E. King, Peter J. O’Grady, and Andreas Savva; July; Integrated Shop Floor Control Using Autonomous
p. 43. Agents; Lin, Grace Yuh-Jiun and James J. Solberg;
CONWIP Assembly with Deterministic Processing and July; p. 57.
Random Outages; Duenyas, Izak and Wallace J. Scheduling and Logistics on Electronics Manufacturing
Hopp; September; p. 97. and Assembly: An Introduction; Wilhelm, Wilbert E.;
A Bayesian Perspective on Taguchi’s Approach to Qual- September; p. 2.
ity Engineering and Tolerance Design; Singpurwalla, Feeder Assignment Models for Concurrent Placement
Nozer D.; November; p. 18. Machines; Grotzinger, Stephen; September; p. 31.
An Overview of Taguchi Method and Newly Developed A Review of Production Planning and Scheduling Mod-
Statistical Methods for Robust Design; Tsui, Kwok- els in the Semiconductor Industry Part I: System
Leung; November; p. 44. Characteristics, Performance Evaluation and Produc-
Estimating Life Functions of Chi Distribution Using Se- tion Planning; Uzsoy, Reha, Chung-Yee Lee, and
lected Order Statistics; Ali, M. Masoom, Dale Um- Louis A. Martin-Vega; September; p. 47.
bach, and A. K. MD. E. Saleh; November; p. 88. Batch Sequencing; Unal, Ali Tamer and Ali S. Kiran;
The Optimum Speed of Visual Inspection Using a Ran- September; p. 73.
dom Search Strategy; Morawski, Thomas B., Colin Control of Multiproduct Bulk Service Diffusion/Oxi-
G. Drury, and Mark H. Karwan; November; p. 122. dation Processes; Fow\-r, John W., Gary L. Hogg,
A Model for Analysis of Work Sampling Statistics; Pape, and Don T. Phillips; September; p. 84.
Elinor S.; November; p. 134.
Quality Control
Production and Inventory Control Inspection
Inventory Control The Optimum Speed of Visual Inspection Using a Ran-
The Effect of Initial Inventories in a Two-Echelon Sys- dom Search Strategy; Morawski, Thomas B., Colin
tem; Gerchak, Yigal and Xin Zhang; March; p. 64. G. Drury, and Mark H. Karwan; November; p. 122.
Effects of Inventory Miscount and Non-Inclusion of Lead Quality Control
Time Variability on Inventory System Performance; Quality Control and Its Application in Production Sys-
Kumar, Sameer and Sant Arora; May; p. 96. tems; Elsayed, Elsayed and Duane Dietrich; Novem-
Price Changes and Order Quantities: Impacts of Dis- ber; p. 2.
count Rate and Storage Costs; Hall, Randolph W.; The Use of Statistical Process Control and Design of
May; p. 104. Experiments in Product and Process Improvement;
Optimizing Transportation Contracts to Support Just- Montgomery, Douglas C.; November; p. 4.
In-Time Deliveries: The Case of One Contracted Truck Off-Line Quality Control in Electronics Assembly: Iden-
per Shipment; Yano, Candace Arai; May; p. 177. tifying the Critical Problem; Albin, Susan L. and
Evaluation of Supplier-Restricted Purchasing Options David J. Friedman; November; p. 58.
Under Temporary Price Discounts; Aull-Hyde, Rhon- Time-Series Investigation of Subsample Mean Charts;
da L.; May; p. 184. Alwan, Layth C. and Darrell Radson; November;
Optimal Inventory Policy for Perishable Items with Time p. 66.
Proportional Demand; Xu, Haiping and Hsu-Pin Reliability
Wang; November; p. 105. Optimal Burn-In Simulation on Highly Integrated Cir-
Production Control cuit Systems; Chien, Wei-Ting Kary and Way Kuo;
Integrating Kanban Type Pull Systems and MRP Type November; p. 33.
Push Systems: Insights from a Markovian Model; Age-And-Test Procedures for True Reliability Improve-
Deleersnyder, Jean-Luc, Thom J. Hodgson, Russell ment: Feasibility and Economic Justification; Barber,
E. King, Peter J. O’Grady, and Andreas Savva; July; James S. and Kenneth R. Gehner; November; p. 81.
p. 43. Estimating Life Functions of Chi Distribution Using Se-
Integrated Shop Floor Control Using Autonomous lected Order Statistics; Ali, M. Masoom, Dale Um-
Agents; Lin, Grace Yuh-Jiun and James J. Solberg; bach, and A. K. MD. E. Saleh; November; p. 88.
July; p. 57. A Counter-Intuitive Aspect of Component Importance
Production Planning in Linear Consecutive-k-out-of-n Systems; Zakaria,
A Review of Production Planning and Scheduling Mod- R. S., H. T. David and Way Kuo; November; p. 147.
els in the Semiconductor Industry Part I: System Sampling
Characteristics, Performance Evaluation and Produc- Design of Acceptance Sampling Plans Under Varying
tion Planning; Uzsoy, Reha, Chung-Yee Lee, and Inspection Error; Shin, Wan S. and Sunil Lingayat;
Louis A. Martin-Vega; September; p. 47. May; p. 111.
On Capacity Modeling for Production Planning with Time-Series Investigation of Subsample Mean Charts;
Alternative Machine Types; Leachman, Robert C. and Alwan, Layth C. and Darrell Radson; November;
Tali F. Carmon; September; p. 62. p. 66.
Production Scheduling A Model for Analysis of Work Sampling Statistics; Pape,
Algorithms for Scheduling Multi-Level Just-In-Time Pro- Elinor S.; November; p. 134.
November 1992, ITE Transactions 187
an Object-Oriented Approach; Mize, Joe H., Hemant
1600 Work Measurement C. Bhuskute, David B. Pratt, and Manjunath Kamath;
1607 Standards Auditing July; p. 14.
Time Unit Models for Work Measurement Audits; Pape, Decision Integration Fundamentals in Distributed Manu-
Elinor S. and William C. Arnwine; March; p. 70. facturing Topologies; Papastavrou, Jason D. and Shi-
Adjustment of Time Standard Audit Values for MIL-STD- mon Y. Nof; July; p. 27.
1567A; Pape, Elinor S., William C. Arnwine, and Design of a Knowledge-Based On-Line Simulation Sys-
Rita Casavantes; May; p. 153. tem to Control a Manufacturing Shop Floor; Mani-
vannan, S. and Jerry Banks; July; p. 72.
1700 Data Processing Systems Design CIMGEN-A Computer Aided Software Engineering Tool
1704 Information Retrieval for Development of FMS Control Software; Joshi,
Task Decomposition in Cut-Off Dimensioning: A Frame- Sanjay B., Erik G. Mettala, and Richard A. Wysk;
Based Model; Kacha, Pierre and Colin Moodie; July; p. 84.
March; p. 11. Automated Process Planning for Printed Circuit Card
Intelligent Scheduling with Machine Learning Capabil- Assembly; McGinnis, L. F., J. C. Ammons, M. Car-
ities: The Induction of Scheduling Knowledge; Shaw, lyle, L. Cranmer, G. W. Depuy, K. P. Ellis, C. A.
M. J., S. Park, and N. Raman; May; 156. Tovey, and H. Xu; September; p. 18.
Modeling of Integrated Manufacturing Systems Using