Table Of Content

INDEX TO EXPERIMENTAL TECHNIQUES VOLUME 16, 1992 Title Index Optical-precision Alignment of Diffraction Grating Mold in Moiré Interferometry—D. Joh, 19-22 (May/June). Automated Measurement of Profile Dimensions—W. Barrett, K. Majury, N. Photoelastic Data Acquisition by the Digitizing Technique over Arbitrary Popplewell and A.H. Shah, 21-23 (July/Aug). Boundaries—H. Mahfuz, T.-L. Wong and R.O. Case, 39-42 (May/June). Calibration Approach for Smart Structures Using Embedded Sensors, A— Photoplastic Study of Plastic Strain Distributions in Rastegaev Upset Test S.H. Smith, A.A. Boiarski and D.G. Rider, 25-31 (Mar/Apr). Specimens—J.L.F. Freire and R.D. Vieira, 17-20 (July/Aug). Color Digital Imaging System for Bicolor Moiré Analysis—D.E.P. Hoy, 25-27 Quantifying the Influence of Postoperative Hand Dressings on Hand Edema—W.P. Hnat and L.S. Levin, 43-46 (May/June). (May/June). Combination Probe for Ground Movement Measurements, A—A.S. Rea!-time Response of the Simple Pendulum: An Experimental Technique Kumbhojkar, D. Arnstan and M.K. Phang, 13-16 (Mar/Apr). A. Ertas and G. Mustafa, 33-35 (July/Aug). Residual Stress Measurement on Cold-formed Profiles—E. de M. Batista Combined Analytical-experimental Tensile Test Technique for Brittle Materials, A—M.L. Chu, R.J. Scavuzzo and T.S. Srivatsan, 46-50 and F.C. Rodriques, 25-29 (Sept/Oct). Scanning Laser Doppler Techniques for Vibration Testing—P. Sriram, J.1. (Jan/Feb). Considerations on Interference-fit Stresses with Different Materials via Craig and S. Hanagud, 21-26 (Nov/Dec). Shape Optimization for a Composite Crack-length Sensor—R. Prabhakaran Three-dimensional Photoelastic Analysis—W.E. Nickola, 28-35 and M. Ramasamy, 36-38 (Sept/Oct). (May/June). Simple Extensometer for Transverse Strain Measurements During Uniaxial Curvature Measurement of Thin Plates by Moiré Shearing Interferometry—L. Loading of Moderately Compliant Materials, A—V.H. Kenner, C.F. Popelar Wang and D. Yun, 23-24 (May/June). and C.H. Popelar, 17-19 (Mar/Apr). Deformed Surface Curve Measurements Using Photogrammetric Use of Solid-state Hydrophones in the gathering of Hydrodynamic Pressure, Techniques—Z.L. Kahn-Jetter, J.A. Turso and P.J. Pritchard, 43-45 On the—Z.H. Duron, 20-24 (Mar/Apr). (Jan/Feb). Design of a Composite Material Angle Sample Bending Test Fixture—J.C. Versatile Powder Production and Collection System for Rapidly Solidified Metal and Ceramic Powders, A—K.A. Khor, 13-16 (July/Aug). Roberts, P.J. Biermann and P.D. Wienhold, 39-42 (Sept/Oct). Digital Moiré of Moiré—A. Asundi and B.M. Dobbins, 13-18 (May/June). Effect of Lead-wire Capacitance on Frequency Response—J.B. Sickles and J.W. Dally, 36-38 (May/June). Elastoplastic Notch Root Strains: Measurements Versus Finite-element Author Index Predictions—R.L. Tregoning, 41-45 (Nov/Dec). Evaluation of Fracture Toughness Through Jj, Testing with Standard Compact Tension Specimen—B. Nageswara Rao and A.R. Acharya, 37-39 Acharya, A.R.—Evaluation of Fracture Toughness Through Jj, Testing with (Jan/Feb). Standard Compact Tension Specimen, 37-39 (Jan/Feb). Evaluation of Residual Stress in Valve Disks Due to Stellite Deposition—K. Arnstan, D.—A Combination Probe for Ground Movement Measurements, Ravi Sankar, T. Narayanan, R. Narayanan, R. Muruganandam and B. 13-16 (Mar/Apr). Jayakar, 30-32 (Sept/Oct). Asundi, A.—Digital Moiré of Moiré, 13-18 (May/June). Experimental Determination of Acoustic Mode Shapes in a Reverberant Barrett, W.—Automated Measurement of Profile Dimensions, 21-23 Room—E. Little, 43-47 (Sept/Oct). (July/Aug). Experimental Determination of Residual Stresses with the Ring-core Method Batista, E. de M.—Residual Stress Measurements on Cold-formed Profiles, and an On-line Measuring System—S. Keil, 17-24 (Sept/Oct). 25-29 (Sept/Oct). Experimental Equipment and Methods for Measuring Damping Capacity—M. Biermann, P.J.—Design of a Composite Material Angle Sample Bending Nouillant, M. Chapuis, J.M. Delas and P. Miot, 27-32 (Nov/Dec). Test Fixture, 39-42 (Sept/Oct). Extending Creep Measurements to Short Times—J.L. Sullivan and E.J. Blais, E.J.—Extending Creep Measurements to Short Times, 37-40 Blais, 37-40 (Nov/Dec). (Nov/Dec). Fracture Study of Quasi-brittle Material Using a Fast-scanning Electron Boiarski, A.A.—A Calibration Approach for Smart Structures Using Microscope—M.L. Wang, T.J. Ross, L.Z. Tan and R.J. Macy, 29-36 Embedded Sensors, 25-31 (Mar/Apr). (Jan/Feb). Case, R.O.—Photoelastic Data Acquisition by the Digitizing Technique over Friction Measurement in a Lubricated Sliding Point Contact—S.H. Winoto, Arbitrary Boundaries, 39-42 (May/June). 29-32 (July/Aug). Chapuis, M.—Experimental Equipment and Methods for Measuring Guidelines for Applying the Method of Caustics in Crack Problems—M. Damping Capacity, 27-32 (Nov/Dec). Konsta-Gdoutos and E.E. Gdoutos, 25-28 (Jan/Feb). Chou, C.P.—A New Approach for Determining the Induced Drilling Stresses impact Wave and Stress—S. Kida and H. Kakishima, 32-36 (Mar/Apr). in the Hole-drilling Method of Residual Stress Measurement, 33-35 Instrumentation Techniques for Ceramic Radiant Tubes—A.E. Segall, 37-41 (Sept/Oct). (Mar/Apr). Chu, M.L.—A Combined Analytical-experimental Tensile Test Technique for Measurement of Impact Delamination by Deply Technique—C.G. Kim and Brittle Materials, 46-50 (Jan/Feb). E.J. Jun, 26-28 (July/Aug). Craig, J.1.—Scanning Laser Doppler Techniques for Vibration Testing, Measuring Forces in Liquid Bagging—J. Jeswiet, 24-25 (July/Aug). 21-26 (Nov/Dec). Mechanical Fasening of Composite Materials—K.B. Zimmerman, 36-40 Dally, J.W.—Effect of Lead-wire Capacitance on Frequency Response, 36- July/Aug). 38 (May/June). Modal Test of a Large Spacecraft Using a Mass-loaded Interface—J.M. Delas, J.M.—Experimental Equipment and Methods for Measuring Damping Haughton, J.A. Hauser and L.M. Turner, 15-20 (Nov/Dec). Capacity, 27-32 (Nov/Dec). Monitoring of Strains in Small Diameter Pipe—S.M. Sargand, G.F. Mitchell Dobbins, B.M.—Digital Moiré of Moiré, 13-18 (May/June). and R.C. Rogers, 40-42 (Jan/Feb). Duron, Z.H.—On the Use of Solid-state Hydrophones in the Gathering of New Approach for Determining the Induced Drilling Stresses in the Hole Hydrodynamic Pressure Response Data, 20-24 (Mar/Apr). drilling Method of Residual Stress Measurement—C.C. Weng, Y.C. Lin and Ertas, A.—Real-time Response of the Simple Pendulum: An Experimental C.P. Chou, 33-35 (Sept/Oct). Technique, 33-35 (July/Aug). Optical-fiber Interferometric Strain Sensor Using a Single Fiber—N. Freire, J.L.F.—Photoplastic Study of Plastic Strain Distributions in Narendran, A. Shukla and S. Letcher, 33-36 (Nov/Dec). Rastegaev Upset Test Specimens, 17-20 (July/Aug). Experimental Techniques 59 Gdoutos, E.E.—Guidelines for Applying the Method of Caustics in Crack Popelar, C.H.—A Simple Extensometer for Transverse Strain Problems, 25-28 (Jan/Feb). Measurements During Uniaxial Loading of Moderately Compliant Materials, Hanagud, S.—Scanning Laser Doppler Techniques for Vibration Testing, 17-19 (Mar/Apr). 21-26 (Nov/Dec). Popplewell, N.—Automated Measurement of Profile Dimensions, 21-23 Haughton, J.M.—Modal Test of a Large Spacecraft Using a Mass-loaded (July/Aug). interface, 15-20 (Nov/Dec). Prabhakaran, R.—Shape Optimization for a Composite Crack-length Hauser, J.A.—Modal Test of a Large Spacecraft Using a Mass-loaded Sensor, 36-38 (Sept/Oct). interface, 15-20 (Nov/Dec). Pritchard, P.J.—Deformed Surface Curve Measurements Using Hnat, W.P.—Quantifying the Influence of Postoperative Hand Dressings on Photogrammetric Techniques, 43-45 (Jan/Feb). Hand Edema, 43-46 (May/June). Ramasamy, M.—Shape Optimization for a Composite Crack-length Sensor, Hoy, D.E.P.—Color Digital imaging System for Bicolor Moiré Analysis, 25-27 36-38 (Sept/Oct). (May/June). Rao Nageswara, B.—Evaluation of Fracture Toughness Through Jj, Testing Jayakar, B.—Evaluation of Residual Stress in Valve Disks Due to Stellite with Standard Compact Tension Specimen, 37-39 (Jan/Feb). Deposition, 30-32 (Sept/Oct). Ravi Sankar, K.—Evaluation of Residual Stress in Valve Disks Due to Jeswiet, J.—Measuring Forces in Liquid Bagging, 24-25 (July/Aug). Stellite Deposition, 30-32 (Sept/Oct). Joh, D.—Optical-precision Alignment of Diffraction Grating Mold in Moiré, Rider, D.G.—A Calibration Approach for Smart Structures Using Embedded 19-22 (May/June). Sensors, 25-31 (Mar/Apr). Jun, E.J.—Measurement of impact Delamination by Deply Technique, 26-28 Roberts, J.C.—Design of a Composite Material Angie Sample Bending Test (July/Aug). Fixture, 39-42 (Sept/Oct). Kahn-Jetter, Z.L.—Deformed Surface Curve Measurements Using Rodrigues, F.C.—Residual Stress Measurements on Cold-formed Profiles, Photogrammetric Techniques, 43-45 (Jan/Feb). 25-29 (Sept/Oct). Kakishima, H.—impact Wave and Stress, 32-36 (Mar/Apr). Rogers, R.C.—Monitoring of Strains in Small Diameter Pipe, 40-42 Keil, S.—Experimental Determination of Residual Stresses with the Ring- (Jan/Feb). core Method and an On-line Measuring System, 17-24 (Sept/Oct). Ross, T.J.—Fracture Study of Quasi-brittle Material Using a Fast-scanning Kenner, V.H.—A Simple Extensometer for Transverse Strain Measurements Electron Microscope, 29-36 (Jan/Feb). During Uniaxial Loading of Moderately Compliant Materials, 17-19 Sargand, S.M.—Monitoring of Strains in Small Diameter Pipe, 40-42 (Mar/Apr). (Jan/Feb). Khor, K.A.—A Versatile Powder Production and Collection System for Scavuzzo, R.J.—A Combined Analytical-experimentai Tensile Test Rapidly Solidified Metal and Ceramic Powders, 13-16 (July/Aug). Technique for Brittle Materials, 46-50 (Jan/Feb). Kida S.—impact Wave and Stress, 32-36 (Mar/Apr). Segall, A.E. — instrumentation Techniques for Ceramic Radiant Tubes, 37 Kim, C.G.—Measurement of impact Delamination by Deply Technique, 26- 41 (Mar/Apr). 28 (July/Aug). Shah, A.H.—Automated Measurement of Profile Dimensions, 21-23 Konsta-Gdoutos, M.—Guidelines for Applying the Method of Caustics in (July/Aug). Crack Problems, 25-28 (Jan/Feb). Shukla, A.—Optical-fiber Interferometric Strain Sensor Using a Single Fiber, Kumbhojkar, A.S.—A Combination Probe for Ground Movement 33-36 (Nov/Dec). Measurements, 13-16 (Mar/Apr). Sickles, J.B.—Effect of Lead-wire Capacitance on Frequency Response, Letcher, S.—Optical-fiber Interferometric Strain Sensor Using a Single Fiber, 36-38 (May/June). 33-36 (Nov/Dec). Smith, S.H.—A Calibration Approach for Smart Structures Using Embedded Levin, L.S.—Quantifying the Influence of Postoperative Hand Dressings on Sensors, 25-31 (Mar/Apr). Hand Edema, 43-46 (May/June). Sriram, P.—Scanning Laser Doppler Techniques for Vibration Testing, Little, E.—Experimental Determination of Acoustic Mode Shapes in a 21-26 (Nov/Dec). Reverberant Room, 43-47 (Sept/Oct). Srivatsan, T.S.—A Combined Analytical-experimental Tensile Test Lin, ¥Y.C.—A New Approach for Determining the Induced Drilling Stresses in Technique for Brittle Materials, 46-50 (Jan/Feb). the Hole-drilling Method of Residual Stress Measurement, 33-35 Sullivan, J.L.—-Extending Creep Measurements to Short Times, 37-40 (Sept/Oct). (Nov/Dec). Macy, R.J.—Fracture Study of Quasi-brittle Material Using a Fast-scanning Tan, L.Z.—Fracture Study of Quasi-brittle Material Using a Fast-scanning Electron Microscope, 29-36 (Jan/Feb). Electron Microscope, 29-36 (Jan/Feb). Mahfuz, H.—Photoelastic Data Acquisition by the Digitizing Technique over Tregoning, R.L.—Elastoplastic Notch Root Strains: Measurement Versus Arbitrary Boundaries, 39-42 (May/June). Finite-element Predictions, 41-45 (Nov/Dec). Majury, K.—Automated Measurement of Profile Dimensions, 21-23 Turner, L.M.—Modal Test of a Large Spacecraft Using a Mass-loaded (July/Aug). Interface, 15-20 (Nov/Dec). Mitchell, G.F.—Monitoring of Strains in Small Diameter Pipe, 40-42 Turso, J.A.—Deformed Surface Curve Measurements Using (Jan/Feb). Photogrammetric Techniques, 43-45 (Jan/Feb). Miot, P.—Experimental Equipment and Methods for Measuring Damping Vieira, R.D.—Photoplastic Study of Plastic Strain Distributions in Rastegaev Capacity, 27-32 (Nov/Dec). Upset Test Specimens, 17-20 (July/Aug). Muruganandam, R.—Evaluation of Residual Stress in Valve Disks Due to Wang, L.—Curvature Measurement of Thin Plates by Moiré Shearing Stellite Deposition, 30-32 (Sept/Oct). Interferometry, 23-24 (May/June). Mustafa, G.—Real-time Response of the Simple Pendulum: An Wang, M.L.—Fracture Study of Quasi-brittle Material Using a Fast-scanning Experimental Technique, 33-35 (July/Aug). Electron Microscope, 29-36 (Jan/Feb). Narayanan, R.—Evaluation of Residual Stress in Valve Disks Due to Stellite Weng, C.C.—A New Approach for Determining the Induced Drilling Stresses Deposition, 30-32 (Sept/Oct). in the Hole-drilling Method of Residual Stress Measurement, 33-35 Narayanan, T.—Evaluation of Residual Stress in Valve Disks Due to Stellite (Sept/Oct). Deposition, 30-32 (Sept/Oct). Wienhold, P.D.—Design of a Composite Material Angle Sample Bending Narendran, N.—Opticai-fiber Interferometric Strain Sensor Using a Single Test Fixture, 39-42 (Sept/Oct). Fiber, 33-36 (Nov/Dec). Winoto, S.H.—Friction Measurement in a Lubricated Sliding Point Contact, Nickola, W.E.—Considerations on Interference-fit Stresses with Different 29-32 (July/Aug). Materials via Three-dimensional Photoelastic Analysis, 28-35 (May/June). Wong, T.-L.—Photoelastic Data Acquisition by the Digitizing Technique over Nouillant, M.—Experimental Equipment and Methods for Measuring Arbitrary Boundaries, 39-42 (May/June). Damping Capacity, 27-32 (Nov/Dec). Yun, D.—Curvature Measurement of Thin Plates by Moiré Shearing Phang, M.K.—A Combination Probe for Ground Movement Measurements, interferometry, 23-24 (May/June). 13-16 (Mar/Apr). Zimmerman, K.B.—Mechanical Fastening of Composite Materials, 36-40 Popelar, C.F.—A Simple Extensometer for Transverse Strain Measurements (July/Aug). During Uniaxial Loading of Moderately Compliant Materials, 17-19 (Mar/Apr) 60 N —