Energy science and applied technology: Proceedings of the International Conference on Energy Science and Applied Technology (ESAT 2016), Wuhan, China, 25-26 June 2016

794 Pages·2016·102.82 MB·English

by  Fang

ENERGY SCIENCE AND APPLIED TECHNOLOGY ESAT 2016

PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ENERGY SCIENCE AND
APPLIED TECHNOLOGY (ESAT 2016), WUHAN, CHINA, 25–26 JUNE 2016
Energy Science and Applied
Technology ESAT 2016
Editor
Zhigang Fang
Wuhan University of Technology, Wuhan, Hubei, China
CRC Press/Balkema is an imprint of the Taylor & Francis Group, an informa business
© 2016 Taylor & Francis Group, London, UK
Typeset by V Publishing Solutions Pvt Ltd., Chennai, India
Printed and bound in Great Britain by CPI Group (UK) Ltd, Croydon, CR0 4 YY
All rights reserved. No part of this publication or the information contained herein may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
by photocopying, recording or otherwise, without written prior permission from the publisher.
Although all care is taken to ensure integrity and the quality of this publication and the information
herein, no responsibility is assumed by the publishers nor the author for any damage to the property or
persons as a result of operation or use of this publication and/or the information contained herein.
Published by: CRC Press/Balkema
P.O. Box 11320, 2301 EH Leiden, The Netherlands
e-mail: [email protected]
www.crcpress.com – www.taylorandfrancis.com
ISBN: 978-1-138-02973-6 (Hbk)
ISBN: 978-1-315-37507-6 (eBook PDF)
Energy Science and Applied Technology ESAT 2016 – Fang (Ed.)
© 2016 Taylor & Francis Group, London, ISBN 978-1-138-02973-6
Table of contents
Preface xv
Committees xvii
Sponsors xix
1 Technologies in geology, mining, oil and gas exploration and exploitation of deposits
Numerical simulation of integral fracturing parameters in an ultra-low-permeability oil field 3
C. Lu, B. Luo, J.C. Guo, Z.H. Zhao, X. Xu, S.W. Xiao, Y. Wang & B.G. Chen
Preparation of porous micro-electrolysis material and treatment of acid mine drainage 9
S. Feng, X. Xu, K. Wang & H. Sun
Influence of different cooling techniques on the mineral composition of the zirconia
metering nozzle 13
X. Wang, Q. Xue, L. Zhao & Y. Zhou
Optimization of horizontal well multistage fracturing in offshore gas reservoirs 19
Z. Jia, J. Bai, S. Chen, P. Zhang, C. Zhou & W. Huang
Paleogene strata pathway system and its control on hydrocarbon in Gaoyou Sag 25
S. Dai, Z. Chen, S.S. Macateer & Y. Liu
The characteristics and geological implications of the sporopollen fossils in bauxite
in Zunyi, Guizhou 29
T. Cui
Research on a type of mud pulse communication method in a rotary steering drilling tool 33
D.S. Lin & D. Feng
2 Renewable energy and cell technologies, energy recovery, engines, generators,
electric vehicles
Recovery and utilization process of a vertical tank for sinter waste heat 39
J. Feng, H. Dong, J. Gao, J. Liu & H. Li
A modularized DC-DC converter used in low-power PV-battery power supply applications 45
Q. Liu, T.C. Li, D.L. Zhang & Z.Z. Zhang
Comparative study on the dynamic characteristic of an internal combustion compressor 51
Q. Wang, J. Zhang, M. Zhao, X. Yu & Q. Lu
Diesel common rail pressure control based on feed forward fuzzy PID controller 55
S. Xiang, Z.M. Ji, G.Q. Mo & D.A. Sun
Analysis of the urban electric bus operation parameters under battery replacement 61
J. Wang, X. Zhang & H. Zhai
Performance and economic evaluation of the photovoltaic–thermal system for BIPV applications 67
X.L. Ma, Q. Zhang, X. Zhang & R.J. Hong
Effects of the leading and trailing edge shape on the aerodynamic performance of a vertical axis
wind turbine 73
Q. Yao, G.D. Zhao, C. Wang & C.Y. Zhou
v
Research on the generation of the bubble and the bubble pump characteristics of different diameters 79
H.T. Gao, D.J. Kong, C.B. Wang & H.R. Liu
Photoelectric properties of sol-gel-derived TiO films 85
2
G.C. Qi, F.J. Shan, S.L. Zhao & Z.W. Li
Research on power matching and simulation of a pure electric bus 89
J.F. Song, W. Xia & H. Chen
3 Materials science and chemical engineering
Microstructure and high-damping property of sintered Mn-Cu alloy 97
F.S. Lu, B. Wu, J.F. Zhang, D.L. Zhao & P. Li
Methanol aromatization reaction on ZSM-5 zeolites at different conditions 103
J.Y. Xun, K.M. Ji, J.M. Deng, H.P. Deng, K. Zhang & P. Liu
Study on the migration amount of Bisphenol A and the thermal stability of polycarbonate
with photo-oxidation aging 107
Y. Zhao, Y. Zhao, W. Xu, C. Zhou, Y. Huang & J. Gao
Influence of sintering temperature on microstructure and magnetic properties of
Ni Cu Zn O(FeO) ferrite 111
0.26 0.16 0.58 2 30.985
C. Dong, D. Liang & W. Li
Effect of a stabilizer on the phase composition and mechanical properties of ZrO materials 115
2
Y. Zhou, Q. Xue & B. Liu
The effect of heat treatment on the microstructure and properties of M40/ZM6 composites 119
M. Song, Y. Zhang, X. Zhang, L. Jiang & G. Wu
Fabrication of Cu(In,Ga)Se2 films with the magnetron sputtering method 123
G.C. Qi, Q. Wu, J. Xiang, S.L. Zhao & Z.W. Li
Study on the electrochemical property of a pure titanium plate in a corrosive medium after
anodic oxidation treatment 127
Z. Xu, S. Liu & H. Zheng
Research on photo-degradation of typical sulfonylurea herbicides-nicosulfuron 133
F. Chen & W. Jiang
Electrical conductivity of carbon nanotube fibers synthesized by chemical vapor deposition 135
J. Zhu
Preparation and properties of dredged sediment baking-free bricks 139
R. Jia, P.Q. Yang, H. Liu, X. Peng & Y. Wu
Baotou fluorite component analysis and the possibility of market application in Banyan Obo, China 145
Z. Wang, H. Ren, X. Li, W. Meng, G. Yan, Y. Zhang & T. Huang
Effect of stabilizers on the electrical conductivity of zirconia materials 149
L.P. Tian, Q.H. Xue & L. Zhao
Research of the Cu/Ti overlapping region produced via friction stir lap welding of dissimilar
copper and titanium 153
B. Li, Y. Shen & L. Yao
Research on the prediction of the storage life of HTPB propellant 157
Y. Du, J. Zheng, W. Peng, X. Zhang & Z. Gu
Numerical study of complex rheological behaviors of polymer melt past a cylinder 161
W. Wang & W. Li
Effect of stacking faults on twinning in hexagonal close-packed crystals 165
S. Jiang
GGA+U Study of the elastic, electronic, and optical properties of Ceb 169
6
L.H. Xiao, Y.C. Su, F. Shao & P. Peng
vi
CuSO · 5HO catalyzed N-H homocoupling of N-monoalkylanilines in air: Facile construction
4 2
of 1, 2-diphenylhydrazines and o-semidines 175
H. Zhang & X. Yan
The influence factors of fluorite for making hydrogen fluoride and its additional value 179
Z. Wang, H. Ren, X. Li, G. Yan, W. Meng, Y. Zhang & T. Huang
Surface modification and mechanism of a calcium sulfate whisker treated by calcium
stearate surfactant 185
H. Wang, M. Wang, Y. Zhao & J. Li
Influence of unidirectional hot-stretching on the mechanical and dielectric properties
of polymer-based composites 191
Z. Pu, R. Wei & X. Liu
Influence of an electron-donating active group on the properties of organic nonlinear optical
chromophores containing multiple cyano-based acceptors 195
X. Tang, K. Jia, X. Tang & L. Chen
Polyarylene ether nitrile/zinc tetraamino-phthalocyanine nanofibrous mats with high
visible-light photodegradation performance 199
X. Huang, K. Jia & X. Liu
Enhanced drug loading and encapsulation efficiency of microencapsulated herbal medicine
via an optimization process 203
W. Wang, P.C.L. Hui, F.S.F. Ng, C.-W. Kan, C.B.S. Lau & P. Leung
Electrochemical deposition of FeO/graphene composites for energy storage 207
2 3
K. Ma, D. Zhang & Q. Zhang
A facile one-step solvothermal method to prepare morphology-controlled FeO@SiO
3 4 2
core-shell nanocomposites 213
M. Fu
Synthesis of alginate bonded with zinc (II) phthalocyanine and their
fluorescent property 217
M. Xu, A.C. Grimsdale, K. Jia & X. Liu
4 Environmental engineering and sustainable development
Evaluation method of the fast-charging infrastructure service capability based on the demand
of electric vehicles 223
L. Xia, C. Liu, B. Li, K. Li & L. Yu
Study of the influence of coal exploitation on groundwater resources and the environment
in the Hanglaiwan mine of Northern Shaanxi 227
Z. Dong & S. Wang
Sorption characteristics of soil absorbing β-HCH 231
H. Li, H. Zeng & Y. Liang
The economic feasibility analysis of an integration air source heat pump system based
on an energy management contract 235
S. Li
Purification efficiency of Cr(VI) by constructed wetlands using six
different substrates 239
Y. Bu, J. Liu, S. You & Q. Wu
Research on the operation modes of the microporous aerator for efficient wastewater aerobic
biological treatment 243
F. Li, J. Zhang, C. Liu, Z. Qu, G. Duan & X. Li
Simulation of the multimedia fate of persistent environmental organic pollutants based
on the fugacity theory 249
F. Li, J. Zhang, C. Liu, J. Yang, X. Li & X. Cui
vii
Evaluation of water resources utilization based on AHP and the fuzzy comprehensive
evaluation method 255
Y. Kang, L.X. Ren, Y.Z. Chen, H.H. Zhao & H.W. Lu
Multimedia exposure risk assessment for lead in parts of the Xiandao district based
on the IEUBK model 259
L. Zhu, J. Zhang, F. Li & C. Liu
Variation of stable isotopes of the precipitation at Kun Ming station in China 265
H. Hu & W. Li
Application of an adaptive neuro-fuzzy inference system for the performance analysis
of an air-cooled chiller 269
C. Lee, Y. Chang & Y. Lu
Kinetics of As desorption from soil aggregates by KHPO-aided soil washing 277
2 4
R. Zhao, X. Li & Z. Zhang
5 Electrical and electronic technology, power system engineering
Impact of the effective assets on the costs of power transmission and distribution of grid enterprises 283
L. Guo, H. Ren, J. Zhou & J. Xu
A novel power quality data reconstruction algorithm using compressed sensing 289
Y.T. Jia, T.C. Li, D.L. Zhang & Z.C. Wang
‘Oblique pulling method’ for live replacing V-type insulator string on UHVDC lines 297
L. He, Y. Long, H. Guo & H. Li
Design of a temperature control circuit for a semiconductor laser 303
L. Zhen
Calculation of the electromagnetic parameters in a dry-type air-core reactor based on FEM 307
L. Bo, H. Zheng, J. Hao & X. Hao
Shunt active power filter model predictive current control 311
S. Jiang, H. Chen, N. Jin, G. Cui, Y. Zhang & T. Tao
Study of the evaluation index system of fault-tolerant technology 317
W. Peng, S. Huang, H. Liu & X. Wei
City-type analysis of the electricity supply and demand matching degree 323
D. Wang
An application of the Adomian decomposition method for analysis of the SMIB power system 327
Z.H. Liang & J.F. Gao
Peripheral circuit design and electromagnetic shielding of the PLC control system 333
J. Liu
Research and application of the structure and model of the CCHP energy management system 337
Y. Li, Z. Wang, L. Huang, J. Yu & Y. Wang
Smart grid load forecasting of gray model with optimization of weight function 343
W. Zhu & Q. Guo
Research on relay protection device life cycle based on the gray Markov model 347
Y. Jia, L. Ying, J. Wang, Y. Wang & L. Yang
Research of the maintenance cost allocation of secondary electrical equipment based
on nucleolus solution 351
L. Yang, L.M. Ying, Y.L. Wang, J.W. Wang & Y.T. Jia
Integrated custom-tailored model for RF power amplifiers 357
L. Zhai, Y. He & Q. Liu
Electronic and magnetic properties of NiAl (n = 2–13) clusters 361
n
W. Song, B. Wang, K. Guo & C. He
viii
6 Mechanical, manufacturing, process engineering, fluid engineering
and numerical simulation
Research of the cloud manufacturing resources based on the supply sub-chain 367
Q. Qiu, J. Tu & L. Yi
A method of part lightweight based on filling lattice structure 371
E.C. Liu, L.Z. Wan, G.X. Li, J.Z. Gong & B.Z. Wu
A comparative study of bearing radial stiffness with the analytical method and the finite
element method 375
J. Li, Y.S. Tian, H.L. Zhang, Q. Gao & C.Q. Tan
The design and simulation of a fatigue wear testing system of the flexspline in harmonic drive 381
Z. Wu & L. Chen
The dynamic simulation of harmonic drive considering flexible ball bearing based
on ABAQUS 385
Z. Fu, T. Gang & S. Liu
Analysis of the influence of groove size on the sealing property of hydraulically expanded joints 389
T. Li & C. Duan
Computational study regarding the evolution of volute noise radiation in a centrifugal pump
under variable medium temperature conditions 393
P. Dong, M. Gao, D. Lu & C. Guo
Research on the structure optimization of air-cooled condensers 397
Y. Zhou, X. Dong, Y. Cheng & H. Hu
Influence of vortex shedding of H-vertical axis wind turbines on the structural
dynamics of rotors 401
Q. Yao, J.Y. Wang, C. Wang, C.Y. Zhou & Q.L. Xie
Product integration process of the CMMI grade 3 model 407
C.M. Su, Y.G. Li & L.B. Guo
A novel cohesive zone model for the finite thickness of adhesive layers 413
L. Chen, B. Gu, X. Yu, B. Zhang & J. Tao
Stamp forming of commingled GF/PP fabric with vacuum technology 417
Z. Zhou, B. Jiang & W. Wu
Characteristics research of a low-specific-speed centrifugal pump with splitter blades
and a vaned diffuser 421
C. Qiu & X. Fang
Research on the microstructure of WC-Ni-Fe-cemented carbides 427
J. Wang & X. Jiang
Numerical simulation of the force by particles acting on the blades of a rotary valve 431
X.S. Zhu & L.W. He
Numerical simulation of the elastic stability of cracked plates under uniaxial compression 435
C. Geng
Numerical simulation research on the natural convection heat transfer of diamond-water
nanofluid in a rectangular enclosure 439
Y. Wan, C. Qi, D. Han & C. Li
7 Control and automation, system simulation
Current sensorless control system of PMSM based on a hybrid system 445
W. Peng, S. Huang, H. Liu & X. Wei
Hierarchical modeling method for intelligent plant simulation 449
Z. Zhang & X. Hu
ix