Enabling Manufacturing Competitiveness and Economic Sustainability: Proceedings of the 5th International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2013), Munich, Germany, October 6th-9th, 2013

472 Pages·2014·26.5 MB·English

by  Hoda A. ElMaraghy

Michael F. Zaeh
Editor
Enabling Manufacturing
Competitiveness and
Economic Sustainability
Proceedings of the 5th International Conference on
Changeable, Agile, Reconfi gurable and Virtual Production
(CARV 2013), Munich, Germany, October 6th–9th, 2013
Enabling Manufacturing Competitiveness
and Economic Sustainability
Michael F. Zaeh
Editor
Enabling Manufacturing Competitiveness and
Economic Sustainability
Proceedings of the 5th International Conference on Changeable, Agile,
Reconfigurable and Virtual Production (CARV 2013),
Munich, Germany, October 6th–9th, 2013
ABC
Editor
MichaelF.Zaeh
InstituteforMachineTools
andIndustrialManagement
Boltzmannstraße15
D-85748Garching
Germany
ISBN978-3-319-02053-2 ISBN978-3-319-02054-9 (eBook)
DOI10.1007/978-3-319-02054-9
SpringerChamHeidelbergNewYorkDordrechtLondon
LibraryofCongressControlNumber:2013948232
(cid:2)c SpringerInternationalPublishingSwitzerland2014
Thisworkissubjecttocopyright.AllrightsarereservedbythePublisher,whetherthewholeorpartofthematerialisconcerned,specificallytherightsof
translation,reprinting,reuseofillustrations,recitation,broadcasting,reproductiononmicrofilmsorinanyotherphysicalway,andtransmissionorinformation
storageandretrieval,electronicadaptation,computersoftware,orbysimilarordissimilarmethodologynowknownorhereafterdeveloped.Exemptedfrom
thislegalreservationarebriefexcerptsinconnectionwithreviewsorscholarlyanalysisormaterialsuppliedspecificallyforthepurposeofbeingenteredand
executedonacomputersystem,forexclusiveusebythepurchaserofthework.Duplicationofthispublicationorpartsthereofispermittedonlyunderthe
provisionsoftheCopyrightLawofthePublisher’slocation,initscurrentversion,andpermissionforusemustalwaysbeobtainedfromSpringer.Permissions
forusemaybeobtainedthroughRightsLinkattheCopyrightClearanceCenter.ViolationsareliabletoprosecutionundertherespectiveCopyrightLaw.
Theuseofgeneraldescriptivenames,registerednames,trademarks,servicemarks,etc.inthispublicationdoesnotimply,evenintheabsenceofaspecific
statement,thatsuchnamesareexemptfromtherelevantprotectivelawsandregulationsandthereforefreeforgeneraluse.
Whiletheadviceandinformationinthisbookarebelievedtobetrueandaccurateatthedateofpublication,neithertheauthorsnortheeditorsnorthepublisher
canacceptanylegalresponsibilityforanyerrorsoromissionsthatmaybemade.Thepublishermakesnowarranty,expressorimplied,withrespecttothe
materialcontainedherein.
Printedonacid-freepaper
SpringerispartofSpringerScience+BusinessMedia(www.springer.com)
Preface and Acknowledgements
Ladies and Gentlemen,
Dear readers of these proceedings,
Dear participants of CARV 2013,

The iwb, the Institute for Machine Tools and Industrial Management of Munich University of Technology is extending a warm welcome to all of
you. We are proud to have you here in Munich and we are delighted to host the 5th International Conference on Changeable, Agile,
Reconfigurable and Virtual Production, CARV 2013.

What triggers us to again focus on these subjects? The business environment of manufacturing enterprises is more than ever before
characterized by increasing turbulence and complexity. Hence, the challenges for manufacturing companies arise from the need to design
and realize organizational structures and technical solutions that can quickly and economically react to unpredictable boundary conditions. In
addition to the changeability of internal processes, the agile configuration of supply chains and co-operation networks is indispensable to cope
with the requirements of future markets. The availability of solutions that go beyond flexibility will thus be decisive for the competitiveness. An
efficient interaction between changeable and virtual production is consequently the key for creating sustainable, fast reacting and adaptable
business structures in order to face the future market environment.
As the chairman of this conference, I would like to thank a number of people:
- I am very thankful to my esteemed colleagues Prof. Dr. Hoda A. ElMaraghy, Prof. Dr. Waguih ElMaraghy and Prof. Dr.-Ing. Gunther
Reinhart for being my co-chairs supporting me with valuable advice at any time during the preparations for CARV 2013.
- Many thanks go to my 55 colleagues from four continents, who act as members of the scientific committee. You all did a wonderful
job in reviewing papers and giving feedback very precisely and absolutely timely. It was a pleasure to work with all of you.
- Special thanks are to be attributed to our keynote speakers for their invited talks. In my eyes they are a precious enrichment for
CARV.
- We are thankful to Holiday Inn Munich City Centre for their efforts to provide a very nice venue for this conference, being located
within walking distance from the city centre of Munich, and to Springer for being a reliable partner to print these procedures.
- Most of all I owe thanks to Michael Niehues, Thorsten Klein and Fabian Keller, graduate research assistants and PhD candidates at
iwb and Fraunhofer RMV, for doing all the organizational and preparatory work which was necessary to make CARV 2013 a success
and to make your stay in Munich as comfortable as possible. They did a marvelous job and their patience and endurance must be
admired. They really made my life easy.
- Last but not least, I would like to thank all of you for submitting papers and for coming to Munich. CARV can only live with you, not
without you. We are glad that you selected CARV for publishing your precious research results and for sharing them first hand with
us. Following the advice of our reviewers we could accept 77 of your papers.

By the way: CARV is coming home. We took off in the year 2005 with the 1st CARV and then again hosted the 3rd CARV 2009 and now the 5th
CARV 2013. In between it went across the Atlantic Ocean and took place in Toronto (2nd CARV 2007) and in Montréal (4th CARV 2011), both
hosted by Prof. Dr. Hoda A. ElMaraghy and Prof. Dr. Waguih H. ElMaraghy.
Some words about Munich and the venue: The city of Munich is located near the Bavarian Alps, in the heart of Europe. Founded in the year
1158, we are looking back at more than 850 years of history. With more than 1.4 million residents, Munich is Germany´s third largest city and
one of the most popular travel destinations in Germany. Munich is an important industrial, cultural and transportation centre and attracts many
tourists with its elegant shops, fashionable clubs and bars and tasteful restaurants and breweries. The most famous event in the calendar is
the Oktoberfest, which will take place from September 21st to October 6th, 2013.

The Institute for Machine Tools and Industrial Management (iwb) of the Munich University of Technology (German: Technische Universität
München (TUM)) was founded in 1875 and is comprised of the Chair of Industrial Management and Assembly Technology (Gunther Reinhart)
and the Chair of Machine Tools and Manufacturing Technology (Michael F. Zaeh). The iwb is one of the largest production technology
institutes in Germany. The fields of research at the iwb include production management, automation, machine tools, assembly technology and
robotics, manufacturing process, joining and cutting technology. At the iwb, research, teaching and industrial transfer activities are traditionally
focused on these topics.

Thanks to all of you again. Let us have good conversations during the four days of CARV 2013.

Yours sincerely,

Michael F. Zaeh

Chairman of CARV 2013 Conference
Conference Chair
Professor Michael F. Zaeh (Germany)
Co-Chairs
Professor Hoda A. ElMaraghy (Canada)
Professor Waguih H. ElMaraghy (Canada)
Professor Gunther Reinhart (Germany)
International Scientific Committee
Prof. Abele, E (Germany) Prof. Mantwill, F. (Germany)
Prof. Alting, L (Denmark) Prof. Maropoulos, P.G. (UK)
Prof. Altintas, Y (Canada) Prof. Martin, C. (Germany)
Prof. Aurich, J.C. (Germany) Prof. Matt, D. (Italy)
Prof. Azab, A. (Canada) Prof. Monostori, L. (Hungary)
Prof. Balazinski, M. (Canada) Prof. Müller, E. (Germany)
Prof. Bauernhansl, T. (Germany) Prof. Nee, A. (Singapore)
Prof. Bernard, A. (France) Prof. Newman, S. (UK)
Prof. Bley, H. (Germany) Prof. Nyhuis, P. (Germany)
Prof. Brussel, H. van (Belgium) Prof. Park, H.-S. (South Korea)
Prof. Ceglarek, D (UK) Prof. Pasek, Z. (Canada)
Prof. Chryssolouris, G. (Greece) Prof. Perrone, G. (Italy)
Prof. Cunha, P.F. (Portugal) Prof. Reinhart, G. (Germany)
Prof. Deif, A. (Egypt) Prof. Seliger, G. (Germany)
Prof. Deuse, J. (Germany) Prof. Schönsleben, P. (Switzerland)
Prof. Dombrowski, U. (Germany) Prof. Schuh, G. (Germany)
Prof. Duffie, N.A. (USA) Prof. Sihn, W. (Austria)
Prof. ElMaraghy, H.A. (Canada) Prof. Soderberg, R. (Sweden)
Prof. ElMaraghy, W.H. (Canada) Prof. Suh, N.P. (South-Korea)
Prof. Gausemeier, J. (Germany) Prof. Teti, R. (Italy)
Prof. Gronau, N. (Germany) Prof. Tolio, T. (Italy)
Prof. Günthner, W.A. (Germany) Prof. Torvinen, S. (Finland)
Prof. Houten, F. van (Netherlands) Prof. Tracht, K. (Germany)
Prof. Jovane, F. (Italy) Prof. Tseng, M. (Hong Kong)
Prof. Koren, Y. (USA) Prof. Urbanic, J. (Canada)
Prof. Koshy, P. (Canada) Prof. Vancza, J. (Hungary)
Prof. Kuhlang, P. (Austria) Prof. Windt, K. (Germany)
Prof. Kuzgunkaya, O. (Canada) Prof. Wulfsberg, J.P. (Germany)
Prof. Lanza, G. (Germany) Prof. Zaeh, M.F. (Germany)
Prof. Laperrière, L. (Canada)
Table of Contents

Vision and Future Perspectives

Variety, Complexity and Value Creation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Hoda A. ElMaraghy, Waguih H. ElMaraghy

Cycle Management for Continuous Manufacturing Planning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . .. . 9
Jonas Koch, Christian Plehn, Gunther Reinhart, Michael F. Zäh

Morgenstadt – Urban Production in the City of the Future. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Dominik Tobias Matt, Dieter Spath, Steffen Braun, Sebastian Schlund, Daniel Krause

Manufacturing Systems

Tools and Methods for SMEs to Introduce Mutability in Special Purpose Machines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 17
Hendrik Rentzsch, Marcel Tisztl, Tino Langer, Dieter Fischer

A Three Level Model for the Design, Planning and Operation of Changeable Production Systems
in Distributed Manufacturing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . .. . . 23
Dominik Tobias Matt, Erwin Rauch, Daniel Fraccaroli

SMART Reconfigurability Approach in Manufacture of Steel and Façade Constructions. . . . . . . . . . . . . .. . . . .. . . . .. . . . .. . . . .. . . . .. . 29
Dominik Tobias Matt, Erwin Rauch, Vittorio Franzellin

A First Step towards Cross-Platform Integration in Modular Micro-assembly Systems – Concept for
a Process Module Construction Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . .. . . . .. . . . .. . . . 35
Raphael Adamietz, Tobias Iseringhausen, Steffen Gerstenberg, Alexander Verl

Statistical Study for Micro Forming Technologies Used for Linked Parts Production. . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . 41
Florian Weikert, Jessica Weyhausen, Kirsten Tracht

Specification Technique for the Consistent Description of Manufacturing Operations and Resources. . . . . . . . . . . . . . . . . . .. . . . . . . . . . . 47
Gerald Rehage, Frank Bauer, Jürgen Gausemeier

Developing Modular Manufacturing Architectures – An Industrial Case Report. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Steffen Nordahl Joergensen, Casper Schou, Ole Madsen

An Approach Framework Supporting Manufacturing System Design for a Range of Products. . . . . . . . . . . . .. . . . . . . . .. . . . . . . . .. . . . . . 61
Emmanuel Francalanza, Jonathan C. Borg, Carmen L. Constantinescu

A Generic Control Concept for the Simulation-Based Verification of Reconfigurable Transport System Models. . . . . . . . . . .. . . . . . . .. .. . 67
Roland Wischnewski, Juergen Rossmann, Oliver Stern

Forming Plastic Shields on a Reconfigurable Tooling System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Dominik Simon, Sabine Zitzlsberger, Julia Wagner, Lisa Kern, Christoph Maurer, Gunther Reinhart

Developing a Vision for Multi-site Manufacturing System of Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Ursula Rauschecker, Simon J. Ford, Nikoletta Athanssopoulou

Classification, Modelling and Mapping of Skills in Automated Production Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Julian Backhaus, Marco Ulrich, Gunther Reinhart

Transient Analysis of a Re-entrant Manufacturing System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . .. 91
Abdulrahman Seleim, Hoda A. ElMaraghy

Role of Reconfigurable Manufacturing Systems in Minimizing Import Dependency in the South African Press
Tool Enterprise. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Simon Phuluwa, Khumbulani Mpofu, Boitumelo Ramatsetse, Chris Tshawe

Reconfigurable Production Systems – An Appraisal of Applied Production Breakdown Solution Strategies. . . . . . . . .. . . .. . . .. . . .. . . .. . . 105
André Ullrich, Sander Lass, Thomas Hein

Product and Production Co-Development

Implementing Virtual Assembly and Disassembly into the Product Development Process. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Fredrik Ore, Magnus Wiktorsson, Lars Hanson, Yvonne Eriksson
X Table of Contents

The Contribution of Virtual Production Intelligence to Laser Cutting Planning Processes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . .. . . 117
Rudolf Reinhard, Toufik Al Khawli, Urs Eppelt, Tobias Meisen, Daniel Schilberg, Wolfgang Schulz, Sabina Jeschke

Immersive Presentations: Enabling Engaging Virtual Reality Based Training and Teaching by Merging Slide-Based and
VR-Based Elements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . 125
Volker Wittstock, Mario Lorenz, Franziska Pürzel, Tino Riedel

A Vagueness Measure for Concurrent Engineering of Manual Assembly Lines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . 131

Martin Manns, Nestor Andres Arteaga Martin

A Multi-Period Changeable Modular Product Assembly Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . .. . . 137
Mohmmad Hanafy, Hoda A. ElMaraghy

Reducing the Development Time of Flexible Metal Forming Tools Using Hardware-in-the-Loop Simulation. . . . . . . . . . . . . . . . . . . . . . . . . 143

Markus Birkhold, Alexander Verl

Assessment and Configuration of a Product Production System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . 147
Achim Kampker, Peter Burggräf, Mateusz Swist, Christoph Nowacki

Optimized Factory Planning and Process Chain Formation Using Virtual Production Intelligence. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
Max Hoffmann, Kai Kreisköther, Christian Büscher, Tobias Meisen, Achim Kampker, Daniel Schilberg, Sabina Jeschke

Developing a Self-optimizing Robotic Excavator System with Virtual Prototyping Technology. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 159
Hong-Seok Park, Ngoc-Tran Le

Mass Customisation Assessment and Measurement Framework. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . .. 165
Kjeld Nielsen, Thomas Ditlev Brunoe

Formal Modelling of Process Planning in Combined Additive and Subtractive Manufacturing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . 171
Behnood Afsharizand, Aydin Nassehi, Vimal Dhokia, Stephen T. Newman

Dynamic Reaction to Fluctuations in Demand through Line Balancing in Commercial Vehicle Manufacturing. . . . . .. . . . . . . . . . . . . . . . . 177
Markus Pröpster, Gunther Reinhart

Enablers of Change and Manufacturing Success

Meeting New Challenges and Possibilities with Modern Robot Safety Technologies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . 183
Timo Salmi, Otso Väätäinen, Timo Malm, Jari Montonen, Ilari Marstio

Toolpath Generation for CNC Milled Parts Using Genetic Algorithms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 189
Wesley P. Essink, Aydin Nassehi, Stephen T. Newman

Human-Robot-Collaboration System for a Universal Packaging Cell for Heavy Electronic Consumer Goods. . . . . . . . . . . . .. . . . .. . . . . . 195
Carola Zwicker, Gunther Reinhart

Singularity Analysis for a 6 DOF Family of Robots. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 201
Ana Djuric, Mirjana Filipovic, Ljubinko Kevac, Jill Urbanic

Effective Work Region Visualization for Serial 6 DOF Robots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
Ana Djuric, Jill Urbanic, Mirjana Filipovic, Ljubinko Kevac

A Stepped Conveyor Singulator Design for Reconfigurable Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213
Karel Kruger, Anton H. Basson

Systematic Development of Mobile AR-Applications Supporting Production Planning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . 219
Christian Weidig, Nicole Menck, Jan C. Aurich

Approaches for Integration of Agile Procedures into Mechatronic Engineering of Manufacturing Systems. . . . . . . . .. . . . . . . . . . . . . . . . . 225
Thorsten P. Klein, Gunther Reinhart

Control of Reconfigurable Manufacturing Systems Using Object-Oriented Programming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . 231
Rainer Graefe, Anton H. Basson

Towards Alternatives for Agent Based Control in Reconfigurable Manufacturing Systems. . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . 237
Kobus Hoffman, Anton H. Basson, Anro le Roux
Table of Contents XI
Performance Assessment of Heterogeneous Engineering Tools along the Development Process of Mechatronic
Manufacturing Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243
Benny Drescher, Peter Stich, Gunther Reinhart

A New Approach to Interpolation of Tool Path Trajectories with Piecewise Defined Clothoids. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249
Caren Dripke, Friedemann Groh, Matthias Keinert, Alexander Verl

Systematic Procedure for Handling Complexity in the Automotive Production. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . .255
Florian Schöttl, Nils Herrmann, Maik Maurer, Udo Lindemann

Generating Master Assembly Sequence Using Consensus Trees. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261
Mohamed Kashkoush, Hoda A. ElMaraghy

Optimal Design Concept of a Reconfigurable Haptic Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267
Akos Csiszar, Catalin Boanta, Simon Hoher, Cornel Brisan, Alexander Verl

Global Competitiveness and Sustainability

Energy Monitoring for Investigating the Sustainability of Extrusion Process. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . 273
Eugenia Marilungo, Andrea Luzi, Michele Germani

Employee Participation for Increasing Energy Efficiency in Factory Operations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . 279
Uwe Dombrowski, Stefan Ernst, Maren Evers

Energy Value-Stream Mapping – A Method to Optimize Value-Streams in Respect of Time
and Energy Consumption. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . 285
Egon Müller, Timo Stock, Rainer Schillig

Increasing Competitiveness of Egyptian Industrial SMEs via Technology Transfer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . 291
Mohamed T. Salem, Ahmed M. Deif

Planning Approach for Designing and Evaluating Product and Production Adaptations to Local
Market Conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297
Gisela Lanza, Stefan Ruhrmann, Emanuel Moser

A Petri-net Based Approach for Evaluating Energy Flexibility of Production Machines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . 303
Markus Graßl, Erik Vikdahl, Gunther Reinhart

Introduction of a Quality Oriented Production Theory for Product Realization Processes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309
Robert Schmitt, Sebastian Stiller, Björn Falk

A Mathematical Model for Supply Chain Planning in a Build-to-Order Environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 315
Morteza Lalmazloumian, Kuan Yew Wong, Majid Ahmadi

Strategic Screening of Manufacturing Technologies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321
Josef Greitemann, Christian Plehn, Jonas Koch, Gunther Reinhart

Key Success Factors for Production Network Coordination. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 327
Robert Moch, Ralph Riedel, Egon Müller

Agility Enablers in Manufacturing Systems – Contributions of the Production Network Perspective. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333
Max Monauni, Stefan Foschiani

End-of-Life Indices to Manage the Demanufacturing Phase during the Product Design Process. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 339
Michele Germani, Andrea Luzi, Marco Mandolini, Marco Marconi

Enterprise and Knowledge Management

Data Interface Concept for the Connection of Applications to Web-Based Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . 345
Marc Oellrich, Frank Mantwill

Approach for Reducing Data Inconsistencies in Production Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . .. 347
Guenther Schuh, Till Potente, Christina Thomas, Felix Brambring

Concept and Data Model for Assembly Work Content Determination. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . 353
Rulhoff Stefan, Jalali Sousanabady Reza, Deuse Jochen, Emmer Christian
XII Table of Contents

Prioritisation of Influence Variables for a Flexible and Efficient Production. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . 359
Simon Berger, Martin Schmid, Gunther Reinhart

Managing Complexity in Remanufacturing Focusing on Production Organisation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . 365
Steffen Butzer, Sebastian Schötz, Andreasreas Kruse, Rolf Steinhilper

Knowledge Based Configuration of Re-configurable Transfer Centres. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . 371
Alexander Bader, Michael Rauscher, Uwe Heisel, Peter Göhner

Multi-Criteria Decision-Support for Manufacturing Process Chain Selection in the Context of Functionally
Graded Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . 377
Marcus Petersen, Vinzent Rudtsch, Jürgen Gausemeier

Model for a Decision Theory Based Inspection Panning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 383
Robert Schmitt, Christian Janßen, Isabel Basse, Sebastian Schmitt

Hamburg Model of Knowledge Management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 389
Pascal Krenz, Sissy-Ve Basmer, Sonja Buxbaum-Conradi, Jens Peter Wulfsberg

Change Management through Learning Factories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 395
Max Dinkelmann, Jörg Siegert, Thomas Bauernhansl

Pricing Policies of Excess Capacity in Make to Order Production Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 401
Paolo Renna, Giovanni Perrone

Dealing with Seasonalities – An Observation of Different Branches in a Seasonal Environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 407
Hanna Theuer

The Concept of Viral Engineering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 413
Daniel Neumann, Reinhard Erfurth

Reconfigurable Strategic Guidelines for Successful Co-operative Value Creation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . 419
Patrick Philipp Grames, Tobias Redlich, Jens Peter Wulfsberg

Towards Real-Time Computation of Cost of Poor Quality for Discrete Manufacturing Processes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 425
Sachin Karadgi, Daniel Metz, Manfred Grauer

Application and Trends

Tool for Life Cycle Costing of Electric Motors during the Early Design Phases. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . 431
Paolo Cicconi, Michele Germani, Marco Mandolini, Marco Marconi

Design of Production Systems for Large Maritime Structures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . 437
Jan Sender, Martin-Christoph Wanner, Jens Meißner

Development of Lightweight Designs for the Production of Wind Turbine Towers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . 443
Mona Goudarzi, Malte Stonis, Bernd-Arno Behrens

Method for Planning a Changeable Press Plant. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 449
Annika Schneider

Reconfigurable Manufacturing System Design and Implementation – An Industrial Application at a Manufacturer
of Consumer Goods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 455
Ronen Hadar, Arne Bilberg

Energy-Efficient Manufacturing on Machine Tools by Machining Process Improvement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 461
Makoto Fujishima, Masahiko Mori, Yohei Oda

The Impact of E-mobility on Automotive Supply Chain. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . 467
Filippo Emanuele Ciarapica, Dominik Tobias Matt, Matteo Rossini, Pasquale Russo Spena

Configuration of a Multi-use Battery Production. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 473
Gisela Lanza, Anna Sauer, Adrian Kölmel

Author Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . 479