EMC/EMI Components Solutions for 1-Phase AC and DC Power Systems PDF
Preview EMC/EMI Components Solutions for 1-Phase AC and DC Power Systems
PRODUCT CATALOG JULY 2018 EMC/EMI Components Solutions for 1-Phase AC and DC Power Systems Product Index EV/EH series 1 - 4 FN 280 5 - 8 FN 332 9 - 11 FN 343 12 - 13 FN 350 14 - 16 FN 352 Z 17 - 19 FN 370 20 - 23 FN 380 24 - 27 FN 390 28 - 31 FN 402 32 - 34 FN 405 35 - 36 FN 406 37 - 39 FN 410 40 - 41 FN 700 Z 42 - 43 FN 751X 44 - 46 FN 756X 47 - 49 FN 761X 50 - 52 FN 766X 53 - 55 FN 2010 56 - 60 FN 2020 61 - 64 FN 2030 65 - 69 FN 2060 70 - 73 FN 2070 74 - 78 FN 2080 79 - 82 FN 2090 83 - 87 FN 2200 88 - 91 FN 2211 and FN 2210 92 - 94 FN 2211 HV und FN 2210 HV 95 - 97 FN 2410 and FN 2412 98 - 100 FN 2450 101 - 103 FN 9222 104 - 109 FN 9222 E 110 - 113 FN 9226 114 - 116 FN 9233 117 - 121 FN 9233 E 122 - 126 FN 9244 127 - 130 FN 9244 E 131 - 135 FN 9246 136 - 138 FN 9260 139 - 143 FN 9264 144 - 147 FN 9280 148 - 155 FN 9290 156 - 161 IL 13, 13 P, 19 162 - 166 IT-Baureihe 167 - 169 IT-Baureihe 170 - 172 RB series 173 - 178 RD series 179 - 182 RI-Baureihe 183 - 185 RN-Baureihe 186 - 193 RS series 194 - 198 RT series 199 - 203 DATASHEET Common-mode Chokes EV/EH series Common-mode Suppression Chokes Rated currents up to 5 A Approvals Broadband attenuation characteristics Low magnetic leakage flux UL rated materials RoHS compliant Common-mode suppression chokes are mainly used to filter noise on AC power lines. Noise on commercial power lines could enter the equipment and disturb the proper function. Noise generated by the equipment for example from switch mode power supplies need to be filtered and the spread of such generated noise need to be suppressed. Common- mode suppression chokes together with line bypass Technical specifications capacitors building an AC EMI suppression filter device. Maximum continuous operating voltage 250 VAC @ 50°C Features and benefits Operating frequency DC to 400 Hz Rated currents 0.3 to 5 A Rated currents up to 5 A Overcurrent 1.5x Inominal for 1 minute, once per hour Compact and light weight winding-to-winding @ 25°C 3000 VAC, 60 sec, guaranteed 2000 V, 50 Hz, 2 sec, factory test Low magnetic leakage flux Temperature range (operation and storage) -25°C to +100°C (25/100/21) Sectional winding Flammability corresponding to UL 94 V-0 Standard foot print Test conditions Broad range of available inductances and current Measuring frequency 10 kHz; 5 mA <16 μH; ratings 500 μA >16 μH <160 μH; Custom-specific versions 50 μA >160 μH >16 mH; 50 mV >16 mH <160 mH Schaffner offers you also EMI measure- ment service Inductance tolerance ±30% to verify that your design will pass the required Resistance Tolerance max. ±15% @ 25°C; ≤20 mΩ, 1 A; safety standards >20 mΩ ≤200 mΩ, 100 mA; >200 mΩ ≤2 V, 10 mA Electrical characteristics @ 25°C ±2°C Typical applications Input filters for switch mode power supplies Filters to reduce leaking noise TVs, VCRs, multimedia and audio equipment Office automation, communications and other electronic devices Electric ballast AC/AC converters Typical electrical schematic 22 EMC/EMI Products Schaffner Group Datasheets 2017 Choke selection table EV choke EH choke L nominal DC resistance Rated current Weight (±30%) R I (50°C) [mH] [mΩ] [A] [g] EV 20-0.3-02-33M EH 20-0.3-02-33M 33 1780 0.3 10 EV 20-0.5-02-18M EH 20-0.5-02-18M 18 725 0.5 10 EV 20-0.8-02-5M6 EH 20-0.8-02-5M6 5.6 245 0.8 10 EV 20-1.0-02-3M9 EH 20-1.0-02-3M9 3.9 168 1.0 10 EV 20-1.2-02-3M3 EH 20-1.2-02-3M3 3.3 127 1.2 10 EV 20-1.5-02-1M8 EH 20-1.5-02-1M8 1.8 72 1.5 10 EV 20-2.0-02-0M8 EH 20-2.0-02-0M8 0.82 38 2.0 10 EV 24-0.5-02-44M EH 24-0.5-02-44M 44 1250 0.5 18 EV 24-0.8-02-18M EH 24-0.8-02-18M 18 438 0.8 18 EV 24-1.0-02-10M EH 24-1.0-02-10M 10 244 1.0 18 EV 24-1.5-02-4M5 EH 24-1.5-02-4M5 4.5 116 1.5 18 EV 24-2.0-02-2M5 EH 24-2.0-02-2M5 2.5 62 2.0 18 EV 24-3.0-02-1M2 EH 24-3.0-02-1M2 1.2 29 3.0 18 EV 24-4.0-02-0M5 EH 24-4.0-02-0M5 0.5 16 4.0 18 EV 28-1.0-02-36M EH 28-1.0-02-36M 36 591 1.0 31 EV 28-1.5-02-20M EH 28-1.5-02-20M 20 282 1.5 31 EV 28-2.0-02-11M EH 28-2.0-02-11M 11 162 2.0 31 EV 28-3.0-02-5M0 EH 28-3.0-02-5M0 5 79 3.0 31 EV 28-4.0-02-2M3 EH 28-4.0-02-2M3 2.3 40 4.0 31 EV 28-5.0-02-1M1 EH 28-5.0-02-1M1 1.1 27 5.0 31 EV 35-1.0-02-90M EH 35-1.0-02-90M 90 628 1.0 70 EV 35-2.0-02-20M EH 35-2.0-02-20M 20 150 2.0 70 EV 35-3.0-02-10M EH 35-3.0-02-10M 10 72 3.0 70 EV 35-4.0-02-5M0 EH 35-4.0-02-5M0 5 53 4.0 70 EV 35-5.0-02-3M6 EH 35-5.0-02-3M6 3.6 33 5.0 70 All wires rated 130°C or higher. Typical choke attenuation Per CISPR 17; 50 Ω/50 Ω asym EV/EH 20 types EV/EH 24 types EV/EH 28 types EV/EH 35 types A = 33 mH A = 44 mH A = 36 mH A = 90 mH B = 18 mH B= 18 mH B= 20 mH B= 20 mH C = 5.6 mH C= 10 mH C= 11 mH C= 10 mH D = 3.9 mH D= 5.5 mH D= 5 mH D= 5 mH E = 3.3 mH E= 2.5 mH E= 2.3 mH E= 3.6 mH F = 1.8 mH F= 1.2 mH F= 1.1 mH G = 0.8 mH G= 0.5 mH 33 EMC/EMI Products Schaffner Group Datasheets 2017 Mechanical data EV 20 EV 35 EV 24 and 28 EH 20 to 35 44 EMC/EMI Products Schaffner Group Datasheets 2017 Dimensions EV 20 EV 24 EV 28 EV 35 EH 20 EH 24 EH 28 EH35 Tolerances A 21 24.6 29.2 36 21 24 28 36 ±1 B 16 17.4 21 25.5 21 24 28 36 ±1 C 25* 29.1 34.7 42.7 17.8 20 22.9 27.7 ±1 D 4 4 4 4 4 4 4 4 ±1 E Ø0.8 Ø0.8 Ø0.8 Ø1.2 Ø0.8 Ø0.8 Ø0.8 Ø1.0 ±0.1 F 13 13 13 21 13 21 24 30 ±0.5 G 10 10 10 15 10 15 20 25 ±0.5 All dimensions in mm; 1 inch = 25.4 mm * Tolarance is +1/-2 mm Please visitwww.schaffner.comto find more details on filter connectors. DATASHEET IEC Inlet Filters FN 280 Compact filtered power entry module Complies with IEC/EN 60601-1 Approvals Rated currents up to 10 A Single or dual-fuse holder Fuses Ø5 x 20 mm 2-pole rocker switch General purpose application Optional earth line choke (E type) Optional medical versions (B type) (CQC except HI-types) The FN 280 power entry module combines an IEC inlet, a mains filter with single or dual- fuse holder and a 2-pole rocker switch in a small form factor. Choosing FN 280 product line brings you the rapid Performance indicators availability of a standard filter associated with the necessary safety acceptances. Standard IEC connector filters are a practical solution helping you to pass EMI system approval in a short time. A wide selection on amperage ratings, fuse options, mounting possibilities and filters for medical applications are designed to offer you the desired solution. Features and benefits High conducted attenuation performance, based on chokes with high saturation resistance and excellent thermal behavior Technical specifications Rear/front or snap-in mounting Single or dual-fuse holder Maximum continuous operating voltage 250 V, 50/60 Hz 2-pole rocker switch Operating frequency DC to 400 Hz Custom-specific versions are available on request Rated currents 1 to 10 A @ 40°C max. High potential test voltage P –> PE 2000 VAC for 2 sec (standard types) P –> PE 2500 VAC for 2 sec (B types) Typical applications P –> N 760 VAC for 2 sec Protection category IP 40 according to IEC 60529 Portable electrical and electronic equipment Temperature range (operation and storage) -25°C to +85°C (25/85/21) Consumer goods Design corresponding to UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939 EDP and office equipment Flammability corresponding to UL 94 V-2 or better Single-phase power supplies, switch-mode power MTBF @ 40°C/230 V (Mil-HB-217F) 1,500,000 hours supplies Fuse holder 1 or 2 fuses (Ø5 x 20 mm) Test and measurement equipment Marking max. 250 V ~ (text is print. below fuse symbol) Medical equipment Rocker switch description Function 2-pole, dark not illuminated Marking I - 0 Typical electrical schematic Electrical specifications Inrush current 82 A 6,000 on-off operations according to UL 1054, TV5 10,000 on-off operations according to ENEC Switch ratings USA (UL) and Canada (C-UL) 10 A, 125 VAC; 10 A, 250 VAC; 1/3 HP Europe (ENEC) 10 A (4 A), 250 VAC* Mechanical life 50,000 cycles * Value in () relates to the inductive current charge: cosφ = 0.65 26 EMC/EMI Products Schaffner Group Datasheets 2018 Filter selection table Filter Rated current Leakage current** Inductance Capacitance Resistance Output Fuses** Weight @ 40°C (25°C) @ 230 VAC/50 Hz L1 L2 Cx Cy R connections [A] [μA] [mH] [mH] [nF] [nF] [kΩ] [Qty] [g] FN 281-1-06 1 (1.2) 373 7.5 220 2.2 1000 -06 1 140 FN 281-2-06 2 (2.4) 373 2 220 2.2 1000 -06 1 140 FN 281-4-06 4 (4.8) 373 1 220 2.2 1000 -06 1 140 FN 281-6-06 6 (7.2) 373 0.45 220 2.2 1000 -06 1 140 FN 281-10-06 10 (11.6) 373 0.34 220 2.2 1000 -06 1 140 FN 282-1-06 1 (1.2) 373 7.5 220 2.2 1000 -06 2 90 FN 282-2-06 2 (2.4) 373 2 220 2.2 1000 -06 2 90 FN 282-4-06 4 (4.8) 373 1 220 2.2 1000 -06 2 90 FN 282-6-06 6 (7.2) 373 0.45 220 2.2 1000 -06 2 90 FN 282-10-06 10 (11.6) 373 0.34 220 2.2 1000 -06 2 140 FN 283-1-06 1 (1.2) 373 7.5 220 2.2 1000 -06 1 140 FN 283-2-06 2 (2.4) 373 2 220 2.2 1000 -06 1 140 FN 283-4-06 4 (4.8) 373 1 220 2.2 1000 -06 1 140 FN 283-6-06 6 (7.2) 373 0.45 220 2.2 1000 -06 1 140 FN 283-10-06 10 (11.6) 373 0.34 220 2.2 1000 -06 1 140 FN 284-1-06 1 (1.2) 373 7.5 220 2.2 1000 -06 2 90 FN 284-2-06 2 (2.4) 373 2 220 2.2 1000 -06 2 90 FN 284-4-06 4 (4.8) 373 1 220 2.2 1000 -06 2 90 FN 284-6-06 6 (7.2) 373 0.45 220 2.2 1000 -06 2 90 FN 284-10-06 10 (11.6) 373 0.34 220 2.2 1000 -06 2 140 FN 285-1-06 1 (1.2) 373 7.5 220 2.2 1000 -06 1 140 FN 285-2-06 2 (2.4) 373 2 220 2.2 1000 -06 1 140 FN 285-4-06 4 (4.8) 373 1 220 2.2 1000 -06 1 140 FN 285-6-06 6 (7.2) 373 0.45 220 2.2 1000 -06 1 140 FN 285-10-06 10 (11.6) 373 0.34 220 2.2 1000 -06 1 140 FN 286-1-06 1 (1.2) 373 7.5 220 2.2 1000 -06 2 90 FN 286-2-06 2 (2.4) 373 2 220 2.2 1000 -06 2 90 FN 286-4-06 4 (4.8) 373 1 220 2.2 1000 -06 2 90 FN 286-6-06 6 (7.2) 373 0.45 220 2.2 1000 -06 2 90 FN 286-10-06 10 (11.6) 373 0.34 220 2.2 1000 -06 2 140 FN 283 E-1-06 1 (1.2) 373 7.5 0.4 220 2.2 1000 -06 1 140 FN 283 E-2-06 2 (2.4) 373 2 0.4 220 2.2 1000 -06 1 140 FN 283 E-4-06 4 (4.8) 373 1 0.4 220 2.2 1000 -06 1 140 FN 283 E-6-06 6 (7.2) 373 0.45 0.4 220 2.2 1000 -06 1 140 FN 284 E-1-06 1 (1.2) 373 7.5 0.4 220 2.2 1000 -06 2 90 FN 284 E-2-06 2 (2.4) 373 2 0.4 220 2.2 1000 -06 2 90 FN 284 E-4-06 4 (4.8) 373 1 0.4 220 2.2 1000 -06 2 90 FN 284 E-6-06 6 (7.2) 373 0.45 0.4 220 2.2 1000 -06 2 90 FN 282 B-1-06 1 (1.2) 2 7.5 220 1000 -06 2 90 FN 282 B-2-06 2 (2.4) 2 2 220 1000 -06 2 90 FN 282 B-4-06 4 (4.8) 2 1 220 1000 -06 2 90 FN 282 B-6-06 6 (7.2) 2 0.45 220 1000 -06 2 90 FN 282 B-10-06 10 (11.6) 2 0.34 220 1000 -06 2 140 * Maximum leakage under normal operating conditions. Note: if the neutral line is interrupted, worst case leakage could reach twice this level. ** Filters are delivered without fuse. 37 EMC/EMI Products Schaffner Group Datasheets 2018 Filter Rated current Leakage current** Inductance Capacitance Resistance Output Fuses** Weight @ 40°C (25°C) @ 230 VAC/50 Hz L1 L2 Cx Cy R connections [A] [μA] [mH] [mH] [nF] [nF] [kΩ] [Qty] [g] FN 284 B-1-06 1 (1.2) 2 7.5 220 1000 -06 2 90 FN 284 B-2-06 2 (2.4) 2 2 220 1000 -06 2 90 FN 284 B-4-06 4 (4.8) 2 1 220 1000 -06 2 90 FN 284 B-6-06 6 (7.2) 2 0.45 220 1000 -06 2 90 FN 284 B-10-06 10 (11.6) 2 0.34 220 1000 -06 2 140 FN 286 B-1-06 1 (1.2) 2 7.5 220 1000 -06 2 90 FN 286 B-2-06 2 (2.4) 2 2 220 1000 -06 2 90 FN 286 B-4-06 4 (4.8) 2 1 220 1000 -06 2 90 FN 286 B-6-06 6 (7.2) 2 0.45 220 1000 -06 2 90 FN 286 B-10-06 10 (11.6) 2 0.34 220 1000 -06 2 140 * Maximum leakage under normal operating conditions. Note: if the neutral line is interrupted, worst case leakage could reach twice this level. ** Filters are delivered without fuse. Product selector For example: FN 281-6-06, FN 283 B-04-06, FN 283 E-1-06 Typical filter attenuation Per CISPR 17; A=50 Ω/50 Ω sym; B=50 Ω/50 Ω asym; C=0.1 Ω/100 Ω sym; D=100 Ω/0.1 Ω sym 1 A types 2 to 6 A types 10 A types
Description:The list of books you might like
