edgewood senior living pierre

759 Pages·2013·25.25 MB·English

PROJECT MANUAL

EDGEWOOD SENIOR LIVING
PIERRE
Project No: 12-150

Pierre, South Dakota

PREPARED BY:
ICON ARCHITECTURAL GROUP, LLC
4050 Garden View Dr, Ste 101
Grand Forks, ND 58201
Phone: [phone]

Issue Date: July 3, 2013
TABLE OF CONTENTS

SECTIONS PAGES

DIVISION 00 - PROCUREMENT AND CONTRACTING REQUIREMENTS

SECTION 000020 - PROJECT DIRECTORY 2
SECTION 000200 - INVITATION TO BID 2
SECTION 001000 - INSTRUCTIONS TO BIDDERS 6
SECTION 003100 - BID FORM 3
SECTION 005000 - FORM OF AGREEMENT 1
SECTION 007000 - GENERAL CONDITIONS 1

DIVISION 01 - GENERAL REQUIREMENTS

SECTION 010100 - SUMMARY OF WORK 8
SECTION 012300 - ALTERNATES 2
SECTION 012500 - SUBSTITUTION PROCEDURES 4
SECTION 012600 - CONTRACT MODIFICATION PROCEDURES 3
SECTION 012900 - PAYMENT PROCEDURES 6
SECTION 013300 - SUBMITTAL PROCEDURES 10
SECTION 016000 - PRODUCT REQUIREMENTS 6
SECTION 017700 - CLOSEOUT PROCEDURES 7
SECTION 017823 - OPERATION AND MAINTENANCE DATA 9
SECTION 017839 - PROJECT RECORD DOCUMENTS 5
SECTION 018000 - UL ASSEMBLIES 50
SECTION 018500 - COMCHECK - ENVELOPE COMPLIANCE CERTIFICATE 2

DIVISION 02 - EXISTING CONDITIONS

NOT APPLICABLE

DIVISION 03 - CONCRETE

SECTION 033000 - CAST-IN-PLACE CONCRETE 20
SECTION 035413 - GYPSUM CEMENT UNDERLAYMENT 4

DIVISION 04 - MASONRY

SECTION 042000 - UNIT MASONRY 13
SECTION 044300 - STONE MASONRY 6
SECTION 047200 - CAST STONE MASONRY 7

DIVISION 05 - METALS

SECTION 051200 - STRUCTURAL STEEL FRAMING 10
SECTION 055000 - METAL FABRICATIONS 6

DIVISION 06 - WOOD, PLASTICS, AND COMPOSITES
SECTION 061000 - ROUGH CARPENTRY 13
SECTION 061600 - SHEATHING 5
SECTION 061753 - SHOP-FABRICATED WOOD TRUSSES 8
SECTION 064023 - INTERIOR ARCHITECTURAL WOODWORK 10
SECTION 066400 - PLASTIC PANELING 3

DIVISION 07 - THERMAL AND MOISTURE PROTECTION

SECTION 072100 - THERMAL INSULATION 5
SECTION 072419 - WATER-DRAINAGE EXTERIOR INSULATION AND 13
FINISH SYSTEM (EIFS)
SECTION 072500 - WEATHER BARRIERS 3
SECTION 073113 - ASPHALT SHINGLES 10
SECTION 074600 - SIDING 6
SECTION 075323 - ETHYLENE-PROPYLENE-DIENE-MONOMER (EPDM) 10
ROOFING
SECTION 076200 - SHEET METAL FLASHING AND TRIM 13
SECTION 077200 - ROOF ACCESSORIES 5
SECTION 078413 - PENETRATION FIRESTOPPING 7
SECTION 078446 - FIRE-RESISTIVE JOINT SYSTEMS 5
SECTION 079200 - JOINT SEALANTS 8

DIVISION 08 - OPENINGS

SECTION 081113 - HOLLOW METAL DOORS AND FRAMES 11
SECTION 081416 - FLUSH WOOD DOORS 6
SECTION 083113 - ACCESS DOORS AND FRAMES 4
SECTION 083323 - OVERHEAD COILING DOORS 6
SECTION 083613 - SECTIONAL DOORS 10
SECTION 084113 - ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS 10
SECTION 085313 - VINYL WINDOWS 10
SECTION 087100 - DOOR HARDWARE
SECTION 088000 - GLAZING 11
SECTION 088300 - MIRRORS 5
SECTION 088400 - PLASTIC GLAZING 4

DIVISION 09 - FINISHES

SECTION 092900 - GYPSUM BOARD 9
SECTION 093000 - TILING 10
SECTION 095113 - ACOUSTICAL PANEL CEILINGS 7
SECTION 096513 - RESILIENT BASE AND ACCESSORIES 5
SECTION 096516 - RESILIENT SHEET FLOORING 5
SECTION 096519 - RESILIENT TILE FLOORING 5
SECTION 096723 - RESINOUS FLOORING 5
SECTION 096813 - TILE CARPETING 5
SECTION 096816 - SHEET CARPETING 5
SECTION 099113 - EXTERIOR PAINTING 7
SECTION 099123 - INTERIOR PAINTING 8
SECTION 099300 - STAINING AND TRANSPARENT FINISHING 6
DIVISION 10 - SPECIALTIES

SECTION 101400 - SIGNAGE 5
SECTION 101453 - TRAFFIC SIGNAGE 1
SECTION 102800 - TOILET, BATH, AND LAUNDRY ACCESSORIES 6
SECTION 104413 - FIRE EXTINGUISHER CABINETS 5
SECTION 104416 - FIRE EXTINGUISHERS 3
SECTION 105113 - METAL LOCKERS 7
SECTION 105500 - POSTAL SPECIALTIES 7
SECTION 107500 - FLAGPOLES 4

DIVISION 11 - EQUIPMENT

SECTION 113100 - RESIDENTIAL APPLIANCES 3
SECTION 114000 - FOODSERVICE EQUIPMENT 3

DIVISION 12 - FURNISHINGS

SECTION 122113 - HORIZONTAL LOUVER BLINDS 5
SECTION 123200 - MANUFACTURED WOOD CASEWORK 7
SECTION 123661 - SIMULATED STONE COUNTERTOPS 3
SECTION 124813 - ENTRANCE FLOOR MATS AND FRAMES 3

DIVISION 13 - SPECIAL CONSTRUCTION

NOT APPLICABLE

DIVISION 14 - CONVEYING EQUIPMENT

SECTION 142400 - HYDRAULIC ELEVATORS 11

DIVISION 21 - FIRE SUPPRESSION

NOT APPLICABLE

DIVISION 22 - PLUMBING

NOT APPLICABLE

DIVISION 23 - HEATING, VENTILATING, AND AIR-CONDITIONING (HVAC)

NOT APPLICABLE

DIVISION 26 - ELECTRICAL

SECTION 260000 – ELECTRICAL GENERAL REQUIREMENTS 5
SECTION 260500 – ELECTRICAL MATERIALS AND METHODS 6
SECTION 260519 – CONDUCTORS AND CABLE 4
SECTION 260526 – GROUNDING AND BONDING 3
SECTION 260533 – RACEWAYS 4
SECTION 260534 – BOXES 3
SECTION 260553 – IDENTIFICATION FOR ELECTRICAL SYSTEMS 3
SECTION 260923 – LIGHTING CONTROLS 3
SECTION 262413 – DESTRIBUTION SWITCHBOARDS 7
SECTION 262416 – PANELBOARDS 5
SECTION 262726 – WIRING DEVICES 3
SECTION 262813 – FUSES 2
SECTION 262816 – ENCLOSED SWITCHES AND CIRCUIT BREAKERS 3
SECTION 262913 – ENCLOSED CONTROLLERS 3
SECTION 263200 – PACKAGED GENERATOR ASSEMBLY 10
SECTION 263600 – AUTOMATIC TRANSFER SWITCHES 6
SECTION 265000 – LIGHT FIXTURES 6

DIVISION 27 - COMMUNICATIONS

NOT APPLICABLE

DIVISION 28 - ELECTRONIC SAFETY AND SECURITY

SECTION 283100 – FIRE ALARM SYSTEM 9

DIVISION 31 - EARTHWORK

SECTION 311000 - GEOTECHNICAL REPORT 26
SECTION 312200 - GRADING 3
SECTION 312300 - EXCAVATION AND FILL 5
SECTION 312500 - EROSION AND SEDIMENT CONTROLS 7

DIVISION 32 - EXTERIOR IMPROVEMENTS

SECTION 321113 - AGGREGATE BASE COURSE 3
SECTION 321216 - ASPHALT PAVING 3
SECTION 321313 - CONCRETE PAVING 5
SECTION 321600 - CURBS, GUTTERS, SIDEWALKS, AND DRIVEWAYS 5
SECTION 321723 - PAVEMENT MARKINGS 1
SECTION 323119 - DECORATIVE VINYL FENCES AND GATES 2

DIVISION 33 - UTILITIES

SECTION 330513 - MANHOLES AND STRUCTURES 2
SECTION 331100 - WATER UTILITY DISTRIBUTION AND PIPING 9
SECTION 331300 - DISINFECTION OF WATER UTILITY DISTRIBUTION 3
SECTION 333100 - SANITARY UTILITY SEWAGE PIPING 15
SECTION 000020

PROJECT DIRECTORY

Owner: ICON Holding LLC
4050 Garden View Dr, Ste 101
Grand Forks, ND 58201

Architects: ICON Architectural Group LLC
4050 Garden View Drive, Ste 101
Grand Forks, North Dakota 58201
[phone]
[phone] Fax

Soil Engineer: American Technical Services
8105 Black Hawk Rd
Pierre, SD 57718
[phone]
[phone] Fax

Structural ICON Architectural Group LLC
Engineer: 4050 Garden View Dr, Ste 101
Grand Forks, ND 58201
[phone]
[phone] Fax

Civil Interstate Engineering
Engineer: 408 South Coteau
Pierre, SD 57501
[phone]
[phone] Fax

Mechanical Allman & Associates
Engineer: 607 East Center St - Suite 101
Rochester, MN 55904
[phone]
[phone] Fax

Electrical JB Electrical Design, PC
th
Engineer: 1418 146 Lane NW
Andover, MN 55304
[phone]

EDGEWOOD PIERRE 000020 - 1 PROJECT DIRECTORY
Food Service Direct Supply
Consultant: 6767 N Industrial Rd
Milwaukee, WI 53223
800-634-7328

Interior Direct Supply
Designer: 6767 N Industrial Rd
Milwaukee, WI 53223
800-634-7328

|

EDGEWOOD PIERRE 000020 - 2 PROJECT DIRECTORY
SECTION 000200
INVITATION TO BID

Sealed bids for the Edgewood Senior Living facility in Pierre, SD will be received at ICON
Architectural Group, 4050 Garden View Dr, Ste 101, Grand Forks, ND 58201, until Thursday,
th,
July 18 2013 at 2:00 p.m.

It is the responsibility of the bidders to see that mailed or delivered bids are received by the
deadline listed above.

Separate bids will be received at the same time for the contract categories outlined in the
summary of Work, Section 010100.

Drawings and specifications prepared by ICON Architectural Group, LLC and their consultants
may be seen and examined at the Architect's office or the following locations:

Dodge Plan Room, Construction Market Data, Minneapolis, MN

Minnesota Builder’s Exchanges at Duluth, Minneapolis, and St. Paul

North Dakota Builder's Exchanges at Grand Forks, Fargo, and Bismarck.

South Dakota Builder's Exchanges at Aberdeen, Sioux Falls, and Rapid City

Contract bidders may secure copies of the proposed contract documents from the office of the
Architect; ICON Architectural Group LLC, 4050 Garden View Drive, Suite 101, Grand Forks,
North Dakota 58201, telephone [phone] on the following basis:

1. One copy of the Drawings and Specifications, upon payment of $75.00 deposit,
completely refundable if documents are returned to the Architect, postpaid, in
satisfactory condition, within TEN calendar days after bid opening.

2. Additional sets are available upon payment of $75.00 per set, non-refundable.

3. No partial sets will be issued.

4. Electronic copies at: http://iconarchitects.com/files/EdgewoodPierre/

Cash, cashier's check, or certified checks will not be accepted.

A copy of the contractor's license or certificate of renewal thereof issued by the Secretary of State
shall be enclosed in the required bid bond envelope. Envelopes shall be identified as to contents
and project.

All bidders must be licensed for the highest amount of their bids. No bid will be read or
considered which does not fully comply with the above provisions.

The Owner reserves the right to waive any informalities or irregularities, to reject any and all bids

EDGEWOOD PIERRE 000200 - 1 INVITATION TO BID
and to hold all bids for a period of 60 days after the date fixed for the opening thereof.

By: ICON Architectural Group LLC

END OF SECTION

EDGEWOOD PIERRE 000200 - 2 INVITATION TO BID
SECTION 001000
INSTRUCTIONS TO BIDDERS

1. THE WORK: Edgewood Senior Living facility with 19 living units. The building is a
one story wood frame structure of approximately 19,000 square feet located in Pierre, SD.

2. SECURING DOCUMENTS

Copies of the proposed Contract Documents may be obtained from:

ICON Architectural Group LLC
4050 Garden View Dr, Ste 101
Grand Forks, ND 58201
[phone]

Electronic access: http://iconarchitects.com/files/EdgewoodPierre/

3. BID FORM

In order to receive consideration, prepare bids in accordance with the following:

A. Make bids upon the forms provided, properly signed and with all items filled out.
Do not change the wording of the bid form, and do not add words to the bid form.
Make no additional stipulation or qualify the bid in any other manner.
Unauthorized conditions, or provisions attached to the bid will be cause for
rejection of the bid. If alterations by erasure or interlineation are made for any
reason, the bidder must initial them.

B. Email or facsimile bid or modification of same (by same methods) will be
considered. No bids received after the time fixed for receiving them will be
considered. Bids can be emailed to: