Direct Composite Veneer Innovative and amazingly easy restoration of anterior teeth

16 Pages·2013·3.34 MB·English

Direct Composite Veneer
Innovative and amazingly easy
restoration of anterior teeth
The New Direct
Composite Veneering
System.
For innovative and amazingly
easy restoration of anterior teeth
COMPONEER are polymerized, prefabricated nano-hybrid-
composite enamel shells that combine the advantages of
direct composite restorations with the advantages of lab-
made veneers. This is the first perfected system to allow
amazingly easy restorations of anterior teeth with customised
composite shells.
2
Advantages for the dentist:
The pre-shaped COMPONEER veneers are available in differ- • easy and efficient to use
ent sizes and are easy to use for single-tooth reconstruction as
• only one session required
well as complete reconstruction in the anterior region. Time-
• quality dental restorations with
consuming forming of the anatomical shape and surface and
elaborate trimming are no longer required. COMPONEER can excellent aesthetic results
be customised to individual requirements with composite at
• no impressions or laboratory necessary
any time.
• optimum customisation
(choice of colour, highlighting shape
and structure)
• economical for dentists and patients
Set off due to high success rate and efficiency
• high added value: the solution for many
with
patients with reasonable investment for
the dentist
a smile
Good reasons for the patient:
With COMPONEER, quality aesthetic restoration of anterior
teeth can be performed efficiently in just a single session. • beautiful teeth after one appointment
Until now the dentist could only choose between a directly
• high level of conservation of tooth substance
modelled composite restoration or elaborate indirect veneer
• reduced treatment stress
technology. The Direct Composite Veneering System adds a
new and interesting dimension to existing treatment options • customised solution
and gives dentists and patients new economic perspectives.
• high surface and edge quality
Patients can be given a naturally aesthetic smile in just a single
• more economical than indirect solutions
session, and set off smiling – with a “smile to go”.
3
COMPONEER - Technical data:
Flexural modulus 9000 MPa
Flexural strength 127 MPa
Water sorption 16 µg/mm3
Water solubility 0.9 µg/mm3
X-ray opacity 2 mm Al
Vickers hardness 73 kg/mm2
Compressive strength 392 MPa
Smallest particle size 20 nm
ø particle size of filler 0.6 µm
Filler content by weight 80 %
Filler content by volume 65 %
Density 2.0 g/mm3
(Reference: internal measurements)
Novel inner surface with micro-retentive structure
for a permanent bond (24 MPa, see study From 0.3 mm veneer thickness.
"One Coat Bond" page 7). This allows a minimally invasive preparation.
COMPONEER COMPONEER COMPONEER
Bleach Opaque (BL/O) White Opalescent (WO) Universal
For a lighter and For light and For a natural
masking effect bleached teeth restoration
4
Such perfection,
even our
development team
had to smile
with pride.
An easy-to-use product. A fantastic solution. A perfected The novel micro-retentive inner surface increases wettability
system. COMPONEER, Direct Composite Veneers, are a and ensures a durable bond. Special conditioning of the
completely new class of veneers. They are manufactured veneer is not necessary. All this makes COMPONEER a mile-
industrially from highly filled nano-hybrid-composite which stone in veneer technology. A well-thought-out range of
ensures excellent homogeneity and stability of the enamel instruments, as well as comprehensive information mate-
shells. The extremely thin veneer coatings from 0.3 mm allow rial for dentists and patients, round off the product line. This
a high level of conservation of hard tooth substance during quickly gives the user the information required to perform
preparation. The shiny and naturally designed surface adds a attractive, natural restorations effectively and economically.
look of vitality to the restoration.
FDI 13 12 11 21 22 23 FDI 14 24
Maxilla 1 Maxilla 1
US 6 7 8 9 10 11 US 5 12
2 2
S S
M L
FDI 43 42 41 31 32 33
Mandibula 1
US 27 26 25 24 23 22
2
L
S
XL M
For further information on sizes and measurements please go to www.componeer.info
FDI Federation Dentair International · US Universal numbering System 5
1 2
SYNERGY D6 and SYNERGY D6 Flow
The universal nano composite is perfectly colour-
matched to COMPONEER. The easy choice of shades, excel-
lent modelling properties and high resistance to dental
operating lights make this composite ideal for bonding
veneers. SyNERgy D6 FlOW with its excellent flow
properties, is available for contouring and adding that
final touch.
One Coat Bond
This Total Etch Bond is a light-curing mono-component
bonding agent. As COMPONEER is primarily bonded to
enamel this is the ideal choice in adhesives. The bond is
simply applied to the brush or COMPONEER via the syringe.
Only one application layer is required due to the excellent
wettability. Strong, permanent bonding forms the basis for
invisible edges and long-life perfect aesthetics.
COmpOneer Holder
The holder is a pair of specially designed holding tweez-
ers which considerably simplify shape corrections to
COMPONEER as well as the application of the bond. The
interchangeable holder caps (black protective caps)
protect the COMPONEER.
COmpOneer Placer
An instrument made by practising experts for expert
practice: the placer is used to align and position the ve-
neers correctly and without slipping.
COmpOneer Modelling Instrument MB5
The straight end of this instrument is exceptional in design
and allows free rotation during treatment. The spatula end is
extremely thin and sharp for cutting away excess composite.
COmpOneer Contour Guide
The unique bluish transparent contour guides permit
precise contour conformity and, thus, selection of the right
tooth shape. A total of 36 different shapes are available:
6 per size.
6
Three reasons
to smile.
Triple reliability.
SYNERGY D6 One Coat Bond
Optimised abrasion resistance Strong bonding values
The abrasion resistance of SyNERgy D6 is comparable One Coat Bond only requires a single application step
to that of natural enamel and protects the opposing cusps. for perfect adhesion. COMPONEER in combination with One
Coat Bond demonstrates excellent adhesion, on composite,
enamel and dentin. This ensures reliable and long-lasting
adhesion of the restoration. The adhesive strength of
COMPONEER is considerably greater than that for ceramic
veneers due to the special micro-retentive surface.
µm
150
Antagonist natural enamel
120 Restoration SYNERGY D6 30
Natural enamel
90 a 25
P
M
h /
60 ngt 20
30 hesive stre 15
d
A
0 0
Total wear after 1,200,000 cycles (equates to 5 years in vivo) COMPONEER Ceramic veneer One Coat Bond One Coat Bond
on dentine on enamel
(Reference: measurements at the universities of Geneva/Zurich) (Reference: data on file)
COmpOneer
100
no edge discoloration – 92.5 %
Testing edge seal by observing dye penetration 75 minimal edge discoloration – 7.5 %
The tightness of the edge seal after alternating mechanical penetration up to 0.5 mm deep – 0 %
penetration up to 1.0 mm deep – 0 %
and thermal load is outstanding. 92.5 % of all samples show- %] 50 penetration > 1.0 mm deep – 0 %
ed no dye penetration; 7.5 % showed only minimal discolo- [
ration on the edges. In other words, 100 % of the samples 25
exhibited no or only minimal edge discoloration – a highly
positive outcome. The adhesive retention also proved to be 0
stress-resistant. No retention losses were seen. no minimal penetration up penetration up penetration
discoloration discoloration to 0.5 mm to 1.0 mm > 1.0 mm
(Source: Study conducted by the University of Geneva)
7
A smile
for virtually all
occasions.
Whether for incisor extensions, the covering of massive discolouration or the closing of diastemas, aesthetic corrections
can be carried out easily and fast with COMPONEER. This closes the gap between time-consuming freehand and expensive
invasive veneer techniques. Fractures, malposition or anatomical malformation can, of course, also be elegantly and perma-
nently restored using the Direct Composite Veneering System. Especially in extensive reconstruction, the contralateral teeth
can be efficiently set to symmetrical positions.
Clinical Indications
Treatment of caries
1. Extensive cervical and interdental caries,
discolouration of enamel, and slight
malposition
2. Caries treated and homogenised anterior
with COMPONEER
Optimisation of old restorations
1. Extensive old and insufficient restorations
2. Reconstructed function with COMPONEER
Attrition, abrasion, erosion
1. Edge-to-edge occlusion with abraded and
broken anterior teeth with old restoration
2. Functional and aesthetic teeth with normal
overjet constructed with COMPONEER
Tooth fracture
1. Loss of 1/3 of anterior tooth by fracture
2. Simplified shaping and construction with
COMPONEER
8
Aesthetic / cosmetic Indications
Extending incisors
1. Slightly shortened incisal edge with moderate
malposition
2. The tooth proportions are reconstructed and
aligned with COMPONEER
Malposition
1. Extensive malposition with crowding
2. Axially aligned correction and repositioning
with COMPONEER
Cosmetic correction
1. Intrinsic, non-bleachable yellow discoloura-
tion and slightly too short teeth
2. Brightened teeth with COMPONEER
Discolouration
1. Extensive discolouration of enamel and
dentine, cervical lesions
2. Restored function and aesthetics with
COMPONEER
Anatomical malformation
1. Unevenly shaped teeth, conical tooth,
diastema and malposition
2. Alignment of teeth, also to lip, with
COMPONEER
Diastema
1. Diastema and anterior teeth too long
2. Gap closure and realignment with
COMPONEER
9
So easy
to use
it makes you smile.
Benefits for patients & dentists
Whether for an individual tooth or total reconstruction,
COMPONEER is an easy-to-use and safe concept covering
a wide variety of indications. Patients benefit from perma-
nent direct restoration treatment and dentists have new
efficient treatment options.
Clinical case studies
1. Old composite veneers with 2. Removal of old composite and 1. 11 with enamel fractures, 2. Minimally invasive preparation
insufficient edges etching of teeth demineralisation and old com-
posite treatment
3. Teeth aligned with 4. Individualised characteristics in 3. Optimal brightness in spite of 4. Optimal marginal adaptation
COMPONEER to contours of spite of contralateral symmetry marked surface structure at smallest layer thickness
upper and lower lip of COMPONEER
10