Dewberry Architects Inc. 009001

355 Pages·2017·8.87 MB·English

April 24, 2017 BIDDING AND CONTRACT REQUIREMENTS
Document 009001 – Addendum No. 1

Dewberry Architects Inc.
401 SW Water Street, Suite 701
Peoria, IL 61602

TO: PROSPECTIVE BIDDERS
Dewberry Architects Inc. Project No. 50064106
04/24/2017
EXP 11/30/2018
RE: ADDENDUM NO. 1 TO THE BID DOCUMENTS FOR
Illinois State University – Bone Student Center Revitalization

This Addendum is part of the bidding and contract documents and modifies the original bid
documents dated March 09, 2017. Acknowledge receipt of this Addendum in space provided on the
Bid Form. FAILURE TO DO SO MAY SUBJECT BIDDER TO DISQUALIFICATION.

I. PROJECT MANUAL
A. Document 079500 – EXPANSION CONTROL
1. Paragraph 2.2 ARCHITECTURAL JOINT SYSTEMS, GENERAL ADD
“B. Manufacturers: Subject to compliance with requirements, provide
products by one of the following:
1. Architectural Art Mfg., Inc.
2. Balco, Inc.
3. Construction Specialties, Inc.
4. InPro Corporation.
5. MM Systems Corporation.
6. Watson Bowman Acme Corp.”
2. Paragraph 2.3 ARCHITECTURAL JOINT SYSTEMS FOR BUILDING
INTERIORS DELETE
“A. Manufacturers: Subject to compliance with requirements, provide
products by one of the following:
1. Architectural Art Mfg., Inc.
2. Balco, Inc.
3. Construction Specialties, Inc.
4. InPro Corporation.
5. MM Systems Corporation.
6. Watson Bowman Acme Corp.”
Dewberry Architects Inc. 009001 - 1 Addendum 1
2. Paragraph 2.4.A.1. Manufacturer REVISE:
“1. Manufacturer: Subject to compliance with requirements, provide
products by the following: Basis of Design:”

B. Document 087100 - DOOR HARDWARE
1. REPLACE specification section 087100 “Door Hardware” in its entirety.
See Attachment Specification Section 087100 – DOOR HARDWARE

C. Document 095426 – LINEAR WOOD CEILING
1. Paragraph 2.1A. Linear Wood Panel System REVISE
“A. Linear Wood Panel System: Provide manufacturer's standard linear
wood panel system of configuration indicated.

7. Custom Wood Planks: As Indicated in the Finish Schedule on Drawings.
8. Core: Fire retardant particle board.
9. Veneer Species: Maple
1. Basis-of-Design Product: Subject to compliance with
requirements, provide Armstrong World Industries, Inc.;
Woodworks Linear 6640W1-NLC or a comparable product by
one of the following:

a. Hunter Douglas Architectural Products, Inc.; Linear Wood
Open.
b. Rulon Company; Linear Open Style.”

D. Document 096513 – RESILIENT BASE AND ACCESSORIES

1. REPLACE specification section 096513 “Resilient Base and Accessories”
in its entirety. See Attachment Specification Section 096513 –
RESILIENT BASE AND ACCESSORIES
E. Document 102239 – FOLDING PANEL PARTITIONS

1. Paragraph 2.3 D Horizontal Bottom Seals REVISE
“1. Automatically Operated for Acoustical Panels: Extension and retraction
of bottom seal automatically operated by movement of partition,
with operating range not less than 1 inch (25 mm) 2 inch (50 mm)
between retracted seal and floor finish.”

F. Document 114000 – FOODSERVICE EQUIPMENT

1. REPLACE specification section 114000 “Foodservice Equipment” in its
entirety. See Attachment Specification Section 114000 –
FOODSERVICE EQUIPMENT
G. Document 230900 – CONTROLS
Dewberry Architects Inc. 009001 - 2 Addendum 1
1. Paragraph 2.1 Acceptable Manufacturers DELETE
“Johnson Controls and Dynamic Controls, Inc.”
2. Paragraph 2.24 D. 1. a. 7) ADD
“Kele, Honeywell, Johnson Controls as Acceptable Manufacturers.”
H. Document 232218 – STEAM AND STEAM CONDENSATE SPECIALITIES

1. Paragraph 2.2 Pressure Reducing Valve ADD
“Spence Type D and Hoffman Series 2000.”
I. Document 232500 – CHEMICAL (WATER) TREATMENT

1. Paragraph 2.3 B. Water Meter REVISE
“Water Meter: (Heating Water System) Positive displacement type meter
with bronze housing. ¾” meter size. Meter to handle ½ - 30 GPM.”
J. Document 260933 – LIGHTING CONTROL SYSTEMS

1. REPLACE specification section 260933 “Lighting Control Systems” in its
entirety. See Attachment Specification Section 260933 – LIGHTING
CONTROL SYSTEMS
K. Document 321400 - UNIT PAVING FOR LANDSCAPE APPLICATIONS

1. REPLACE specification section 321400 “Unit Paving for Landscape
Applications” in its entirety. See Attachment Specification Section 321400
– UNIT PAVING FOR LANDSCAPE APPLICATIONS
2. Paragraph 2.2.1.A.2. ADD
“Option 2:
Manufacturer: Whitacre Greer
Product: Clay Brick ADA detectable warning paver
Size: 2-3/4” x 4” x 8”
Rating: Vehicular
Color: Premium color mix. Final selection to be determined via mockup
with Landscape Architect and Owner’s Representative.

Option 3:
Manufacturer: Belden Brick
Product: Clay Brick ADA detectable warning paver
Size: 2-3/4” x 4” x 8”
Rating: Vehicular
Color: Premium color mix. Final selection to be determined via mockup
with Landscape Architect and Owner’s Representative.”

Dewberry Architects Inc. 009001 - 3 Addendum 1
3. Paragraph 2.2.1.C.2. ADD
“Option 2:
Manufacturer: Hanover
Product: Detectable Warning ADA Paver
Size: 2-3/4” x 24” x 24”
Spacing: ADA-2
Rating: Vehicular
Color: yellow

Option 3:
Manufacturer: Tiletech
Product: Detectable Warning ADA Paver
Size: 2” x 12” x 24”
Spacing: ADA-2
Rating: Vehicular
Color: Penny Lane

4. Paragraph 2.2.2.1 ADD
“Option 2:
Manufacturer: Aker Stone
Product: Handicapped Parking Kit
Website:http://europeanpaverssouthwest.com/paver/handicapped-
parking-kit/

Option 3:
Manufacturer: Alphabet Signs
Product: Handicap Parking Stencil, Paint to Match Parking Stall
Specification, Refer to Civil
Website: https://www.alphabetsigns.com/signs/handicap-parking-stencil-
39-inch-international-standard.html

II. DRAWINGS
A. Drawing L002-1 - OVERALL SITE PLAN
1. The salvaged sculpture re-install location has been revised. REISSUE
drawing L002-1 in its entirety. See attached drawing L002-1.
B. Drawing L304-1D - LAYOUT PLAN – ENLARGEMENT D
1. The salvaged sculpture re-install location has been revised. REISSUE
drawing L304-1D in its entirety. See attached drawing L304-1D.
C. Drawing L404-1D - MATERIALS PLAN – ENLARGEMENT D
1. The salvaged sculpture re-install location has been revised. REISSUE
drawing L404-1D in its entirety. See attached drawing L404-1D.
D. Drawing S000 – GENERAL STRUCTURAL NOTES
Dewberry Architects Inc. 009001 - 4 Addendum 1
1. REISSUE drawing S-000 in its entirety. See attached drawing S000.
E. Drawing S110-1A – FOUNDATION PLAN – PHASE 01 – AREA A
1. REISSUE drawing S110-1A in its entirety. See attached drawing S110-1A.
F. Drawing S110-1B – FOUNDATION PLAN – PHASE 01 – AREA B
1. REISSUE drawing S110-1B in its entirety. See attached drawing S110-1B.
G. Drawing S110-1C – FOUNDATION PLAN – PHASE 01 – AREA C
1. REISSUE drawing S110-1C in its entirety. See attached drawing S110-1C.
H. Drawing S120-1A – SECOND FLOOR FRAMING PLAN – PHASE 01 – AREA A
1. REISSUE drawing S120-1A in its entirety. See attached drawing S120-1A.
I. Drawing S120-1B – SECOND FLOOR FRAMING PLAN – PHASE 01 – AREA B
1. REISSUE drawing S120-1B in its entirety. See attached drawing S120-1B.
J. Drawing S120-1C – SECOND FLOOR FRAMING PLAN – PHASE 01 – AREA C
1. REISSUE drawing S120-1C in its entirety. See attached drawing S120-1C.
K. Drawing S130-1A – LOW ROOF FRAMING PLAN – PHASE 01 – AREA A
1. REISSUE drawing S130-1A in its entirety. See attached drawing S130-1A.
L. Drawing S130-1B – LOW ROOF FRAMING PLAN – PHASE 01 – AREA B
1. REISSUE drawing S130-1B in its entirety. See attached drawing S130-1B.
M. Drawing S130-1C – LOW ROOF FRAMING PLAN – PHASE 01 – AREA C
1. REISSUE drawing S130-1C in its entirety. See attached drawing S130-1C.
N. Drawing S140-1C – HIGH ROOF FRAMING PLAN – PHASE 01 – AREA C
1. REISSUE drawing S140-1C in its entirety. See attached drawing S140-1C.
O. Drawing S110-2 – FOUNDATION PLAN – PHASE 02 - OVERALL
1. REISSUE drawing S110-2 in its entirety. See attached drawing S110-2.
P. Drawing S120-2 – SECOND FLOOR FRAMING PLAN – PHASE 02 – OVERALL
1. REISSUE drawing S120-2 in its entirety. See attached drawing S120-2.
Q. Drawing S300 – STRUCTURAL FOUNDATION DETAILS
1. REISSUE drawing S300 in its entirety. See attached drawing S300.
Dewberry Architects Inc. 009001 - 5 Addendum 1
R. Drawing S301 – STRUCTURAL FOUNDATION DETAILS
1. REISSUE drawing S301 in its entirety. See attached drawing S301.
S. Drawing S302 – STRUCTURAL FOUNDATION DETAILS
1. REISSUE drawing S302 in its entirety. See attached drawing S302.
T. Drawing S303 – STRUCTURAL FOUNDATION DETAILS
1. REISSUE drawing S303 in its entirety. See attached drawing S303.
U. Drawing S400 – STRUCTURAL FRAMING DETAILS
1. REISSUE drawing S400 in its entirety. See attached drawing S400.
V. Drawing S401 – STRUCTURAL FRAMING DETAILS
1. REISSUE drawing S401 in its entirety. See attached drawing S401.
W. Drawing S402 – STRUCTURAL FRAMING DETAILS
1. REISSUE drawing S402 in its entirety. See attached drawing S402.
X. Drawing S403 – STRUCTURAL FRAMING DETAILS
1. REISSUE drawing S403 in its entirety. See attached drawing S403.
Y. Drawing S404 – STRUCTURAL FRAMING DETAILS
1. REISSUE drawing S404 in its entirety. See attached drawing S404.
Z. Drawing S405 – STRUCTURAL FRAMING DETAILS
1. REISSUE drawing S405 in its entirety. See attached drawing S405.
AA. Drawing S410 – COLUMN SCHEDULE
1. REISSUE drawing S410 in its entirety. See attached drawing S410.
BB. Drawing S503 – STRUCTURAL STANDARD DETAILS
1. REISSUE drawing S503 in its entirety. See attached drawing S503.
CC. Drawing A114-1B – LEVEL 01 FINISH PLAN – PHASE 01 – AREA B
1. NOTE: FINISH LIST IS COMPRISED OF 3 PALETTE OPTIONS
INDICATED AS: A, B, AND C. EACH PALETTE OPTION MUST BE
COORDINATED SOLELY WITHIN THAT PALETTE OPTION.
PALETTE OPTIONS CANNOT BE MIXED, AS INDICATED ON THE
FINISH DRAWINGS.
Dewberry Architects Inc. 009001 - 6 Addendum 1
DD. Drawing A111-1C – LEVEL 01 ANNOTATION PLAN – PHASE 01 – AREA C
1. REVISE plan layout of Storage room 109G and Door 109G. Refer to
Attachment ADD#1 ASK-001.
2. REVISE food venue scope area. Refer to Attachment ADD#1 ASK-001.
EE. Drawing A112-1C – LEVEL 01 DIMENSION PLAN – PHASE 01 – AREA C
1. REVISE plan dimensions of Storage room 109G and Door 109G. Refer to
Attachment ADD# 1 ASK-002.
2. REVISE food venue scope area. Refer to Attachment ADD#1 ASK-002.
FF. Drawing A113-1C – LEVEL 01 REFLECTED CEILING PLAN – PHASE 01 –
AREA C
1. REVISE reflected ceiling plan layout of Storage room 109G. Refer to
Attachment ADD#1 ASK-003.
2. REVISE food venue scope area. Refer to Attachment ADD#1 ASK-003.
GG. Drawing A114-1C – LEVEL 01 FINISH PLAN – PHASE 01 – AREA C
1. REVISE finish plan of Storage Room 109G and PNT-2 Accent wall
location. Refer to Attachment ADD#1 ASK-004.
2. REVISE food venue scope area. Refer to Attachment ADD#1 ASK-004.
HH. Drawing A121-3B – LEVEL 02 ANNOTATION & DIMENSION PLAN – PHASE
03 – AREA B
1. ADD 2 walls for chase to accommodate existing storm drain pipe in the
southwest corner of Serving Room 229A. Refer to Attachment ADD#1
ASK-05.
II. Drawing A406-1 – PHASE 01 – LARGE SCALE FLOOR PLANS, ELEVATIONS,
SECTIONS, & DETAILS – WELCOME DESK
1. DETAIL 5- WELCOME DESK ELEVATION 4. REVISE casework
elevation. Refer to Attachment ADD#1 ASK-006.
JJ. Drawing A413-1 – PHASE 01 – LARGE SCALE FLOOR PLAN, ELEVATIONS,
SECTIONS & DETAILS – EMPORIUM SLIDING PANELS.
1. REISSUE drawing A413-1 in its entirety. See attached drawing A413-1.
Emporium Sliding panel plans, elevations, sections and details revised.
2. ADD section detail 8/413-1 – PANEL DOORS – SECTION THRU PULL
HANDLE. See attached drawing A413-1.
KK. Drawing A456 – PAVILION STAIR PLANS, SECTIONS AND DETAILS.
Dewberry Architects Inc. 009001 - 7 Addendum 1
1. REISSUE drawing A456 in its entirety. See attached drawing A456.
2. ADD section detail 8/456 – PAVILLION STAIR-LEVEL 03 SOFFIT
NORTH. Section callout added to the stair plan and section drawing. See
attached drawing A456.
LL. Drawing QF110-1A – LEVEL 01 EQUIPMENT PLAN – PHASE 01 – AREA A
1. REISSUE drawing QF110-1A in its entirety. See attached drawing QF110-
1A. DELETE enviropure system and revise the pulper to ITEM #47
MM. Drawing QF111-1A – LEVEL 01 UTILITY SCHEDULE – PHASE 01 – AREA A
1. REISSUE drawing QF111-1A in its entirety. See attached drawing QF111-
1A. REVISE utilities for pulper (ITEM #47)
NN. Drawing QF112-1A – LEVEL 01 BUILDING CONDITIONS & VENTILATION
PLAN – PHASE 01 – AREA A
1. REISSUE drawing QF112-1A in its entirety. See attached drawing QF112-
1A. REVISE floor penetration to properly reflect the removal of the
enviropure system.

OO. Drawing QF113-1A – LEVEL 01 PLUMBING PLAN – PHASE 01 – AREA A
1. REISSUE drawing QF113-1A in its entirety. See attached drawing QF113-
1A. REVISE plumbing plan to properly reflect the revisions completed for
the removal of the enviropure system.
PP. Drawing QF113-1C – LEVEL 01 PLUMBING PLAN – PHASE 01 – AREA C
1. REISSUE drawing QF113-1C in its entirety. See attached drawing QF113-
1C. ADD a floor sink to accommodate for the drain on ITEM #342
(Freestyle coke machine)
QQ. Drawing QF114-1A – LEVEL 01 ELECTRICAL PLAN – PHASE 01 – AREA A
1. REISSUE drawing QF114-1A in its entirety. See attached drawing QF114-
1A. REVISE electrical plan to properly reflect the electrical connections for
the pulper.
RR. Drawing QF111-2B – LEVEL 01 UTILITY SCHEDULE – PHASE 02 – AREA B
1. REISSUE drawing QF111-2B in its entirety. See attached drawing QF111-
2B. REVISE utilities for items #154, 156, 166, 167, 196, 200, 202, 205,
215, 217, 242, 243, 244 and 249 per coordination with engineers.
SS. Drawing QF111.1-2B – LEVEL 01 UTILITY SCHEDULE – PHASE 02 – AREA B
Dewberry Architects Inc. 009001 - 8 Addendum 1
1. REISSUE drawing QF111.1-2B in its entirety. See attached drawing
QF111.1-2B. REVISE utilities for items #262, 263, 264, 270 and 275 per
coordination with engineers.
TT. Drawing QF113-2B – LEVEL 01 PLUMBING PLAN – PHASE 02 – AREA B
1. REISSUE drawing QF113-2B in its entirety. See attached drawing QF113-
2B. REVISE plumbing plan per coordination with engineers.
UU. Drawing QF114-2B – LEVEL 01 ELECTRICAL PLAN – PHASE 02 – AREA B
1. REISSUE drawing QF114-2B in its entirety. See attached drawing QF114-
2B. REVISE the electrical plan per coordination with engineers.
VV. Drawing QF121-3B – LEVEL 02 UTILITY SCHEDULE – PHASE 03 – AREA B
1. REISSUE drawing QF121-3B in its entirety. See attached drawing QF121-
3B. REVISE utilities for items #421, 430, 447 and 449 per coordination
with engineers.
WW. Drawing QF122-3B – LEVEL 02 BUILDING CONDITIONS & VENTILATION
PLAN – PHASE 03 – AREA B
1. REISSUE drawing QF122-3B in its entirety. See attached drawing QF122-
3B. REVISE conduit runs for the soda machine and revise the
documentation for the BC&V plans.
XX. Drawing QF123-3B – LEVEL 02 PLUMBING PLAN – PHASE 03 – AREA B
1. REISSUE drawing QF123-3B in its entirety. See attached drawing QF123-
3B. REVISE the plumbing plan for the soda “bag n box” system and filter
per coordination with engineers.
YY. Drawing QF124-3B – LEVEL 02 ELECTRICAL PLAN – PHASE 03 – AREA B
1. REISSUE drawing QF124-3B in its entirety. See attached drawing QF124-
3B. REVISE the electrical connections for the soda system and soda
dispensers, items #422 & #448, cold prep tables, #432A & #445A clam shell
griddles, #430 and #447 fryers.
ZZ. Drawing FP110-1 – LEVEL 1 FIRE PROTECTION – PHASE 1
1. REISSUE drawing FP110-1 in its entirety. See attached drawing FP110-1.
ADD note pointing to FP piping to read: “DO NOT ROUTE FIRE
PROTECTION PIPING DIRECTLY OVER ELECTRICAL EQUIPMENT
IN MECHANICAL ROOM. (TYP.)”
AAA. Drawing FP110-2 – LEVEL 1 FIRE PROTECTION – PHASE 2
1. REISSUE drawing FP110-2 in its entirety. See attached drawing FP110-2.
REVISE note pointing to future area to read: “THIS AREA TO BE
SPRINKLED IN THE FUTURE AND TIED INTO ZONE 1 PIPING. FPC
Dewberry Architects Inc. 009001 - 9 Addendum 1
SHALL SIZE PIPING TO ZONE 1 TO ACCOUNT FOR FUTURE
ADDITION. PIPING TO SERVE THIS AREA SHALL BE INSTALLED
AND CAPPED DIRECTLY OUTSIDE OF AREA FOR FUTURE
CONNECTION.”
BBB. Drawing PD130-2B – LEVEL 3 - PLUMBING – DEMOLITION - PHASE 2 –
AREA B
1. REISSUE drawing PD130-2B in its entirety. See attached drawing PD130-
2B. ADD note 3 to clarify what to do with existing condensate drainage
during phase 2 demolition.
CCC. Drawing PD110-3B – LEVEL 1 - PLUMBING – DEMOLITION - PHASE 3 –
AREA B
1. REISSUE drawing PD110-3B in its entirety. See attached drawing PD110-
3B. REVISE demolition scope near McAlister’s kitchen.
DDD. Drawing PD120-3B – LEVEL 2 - PLUMBING – DEMOLITION - PHASE 3 –
AREA B
1. REISSUE drawing PD120-3B in its entirety. See attached drawing PD120-
3B. ADD note 3 to clarify vent demolition scope. REVISE storm piping
demolition.
EEE. Drawing P1U0-1C – UNDERFLOOR - PLUMBING – PHASE 1 – AREA C
1. REISSUE drawing P1U0-1C in its entirety. See attached drawing P1U0-
1C. ADD GSAN and GV piping for new floor sink.
FFF. Drawing P110-1A – LEVEL 1 - PLUMBING – PHASE 1 – AREA A
1. REISSUE drawing P110-1A in its entirety. See attached drawing P110-1A.
REMOVE mop sink fixture from plumbing scope. Fixture and faucet to be
provided with food service equipment scope.
GGG. Drawing P110-1B – LEVEL 1 - PLUMBING – PHASE 1 – AREA B
1. REISSUE drawing P110-1B in its entirety. See attached drawing P110-1B.
REMOVE mop sink fixture from plumbing scope. Fixture and faucet to be
provided with food service equipment scope. REVISE branch shut off
valves to be located outside of fire rated corridor to avoid fire rated access
panels. REVISE branch piping to three compartment sink in 159E.
HHH. Drawing P110-1C – LEVEL 1 - PLUMBING – PHASE 1 – AREA C
1. REISSUE drawing P110-1C in its entirety. See attached drawing P110-1C.
ADD FS-2 beneath soda machine. ADD note 8 to more clearly describe the
shut of valve installation locations.
III. Drawing P120-1B – LEVEL 2 - PLUMBING – PHASE 1 – AREA B
Dewberry Architects Inc. 009001 - 10 Addendum 1