Developments in Strategic Ceramic Materials II: A Collection of Papers Presented at the 40th International Conference on Advanced Ceramics and Composites January 24–29, 2016 Daytona Beach, Florida

281 Pages·2016·12.509 MB·English

by  Waltraud M. Kriven et al. (eds.)

Developments in Strategic
Ceramic Materials II
Developments in Strategic
Ceramic Materials II
A Collection of Papers Presented at the
40th International Conference on
Advanced Ceramics and Composites
January 24–29, 2016
Daytona Beach, Florida
Edited by
Waltraud M. Kriven
Jingyang Wang
Yanchun Zhou
Dongming Zhu
Gustavo Costa
Volume Editors
Manabu Fukushima
Andrew Gyekenyesi
Copyright © 2017 by The American Ceramic Society. All rights reserved.
Published by John Wiley & Sons, Inc., Hoboken, New Jersey.
Published simultaneously in Canada.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form
or by any means, electronic, mechanical, photocopying, recording, scanning, or otherwise, except as
permitted under Section 107 or 108 of the 1976 United States Copyright Act, without either the prior
written permission of the Publisher, or authorization through payment of the appropriate per-copy fee to
the Copyright Clearance Center, Inc., 222 Rosewood Drive, Danvers, MA 01923, [phone], fax
[phone], or on the web at www.copyright.com. Requests to the Publisher for permission should
be addressed to the Permissions Department, John Wiley & Sons, Inc., 111 River Street, Hoboken, NJ
07030, [phone], fax [phone], or online at http://www.wiley.com/go/permission.
Limit of Liability/Disclaimer of Warranty: While the publisher and author have used their best efforts in
preparing this book, they make no representations or warranties with respect to the accuracy or
completeness of the contents of this book and specifically disclaim any implied warranties of
merchantability or fitness for a particular purpose. No warranty may be created or extended by sales
representatives or written sales materials. The advice and strategies contained herein may not be
suitable for your situation. You should consult with a professional where appropriate. Neither the
publisher nor author shall be liable for any loss of profit or any other commercial damages, including
but not limited to special, incidental, consequential, or other damages.
For general information on our other products and services or for technical support, please contact our
Customer Care Department within the United States at [phone], outside the United States at
[phone] or fax [phone].
Wiley also publishes its books in a variety of electronic formats. Some content that appears in print may
not be available in electronic formats. For more information about Wiley products, visit our web site at
www.wiley.com.
Library of Congress Cataloging-in-Publication Data is available.
ISBN: 978-1-119-32178-1
ISSN: 0196-6219
Printed in the United States of America.
10 9 8 7 6 5 4 3 2 1
Contents
Preface ix
Introduction xi
GEOPOLYMERS
Durability Performance of Alkali-Activated Metakaolin, Slag, Fly 3
Ash, and Hybrids
F. Jirasit, C. H. Rüscher, L. Lohaus, and P. Chindaprasirt
Mica Platelet-Reinforced Geopolymer Composites 13
P. F. Keane, G. P. Kutyla, J. F. Wight, W. Rickard, and W. M. Kriven
Influence of Mix Design Parameters on Geopolymer Mechanical 21
Properties and Microstructure
Mukund Lahoti, En-Hua Yang, and Kang Hai Tan
Thermal Performance of Metakaolin-Based Geopolymers: Volume 35
Stability and Residual Mechanical Properties
Mukund Lahoti, En-Hua Yang, and Kang Hai Tan
Effect of Phyllosilicate Type on the Microstructure and Properties 47
of Kaolin-Based Ceramic Tapes
Gisèle L. Lecomte-Nana , Khaoula Lebdioua,, Mylène Laffort, Nadia Houta,
Nicolas Tessier-Doyen, Younès Abouliatim, and Claire Peyratout
Effect of Alkali Cations on the Polycondensation Reaction 61
J. Peyne, E. Joussein, J. Gautron, J. Doudeau, and S. Rossignol
Development of a Mold for Thermoplastics Based on a Phosphate 69
Cement
J. Blom, H. Rahier, and J. Wastiels
v
Properties of Cork Particle Reinforced Sodium Geopolymer 79
Composites
Daniel S. Roper, Gregory P. Kutyla, and Waltraud M. Kriven
The Role of Alkaline Earth Ions in Geopolymer Binder Formation 83
N. Essaidi, P. Leybros, E. Joussein, and S. Rossignol
Investigations of the Thermally Induced Hydrogen Release of 93
NaBH , NH BH and Their Geopolymer Composites
4 3 3
Z. Assi, L. Schomborg, and C. H. Rüscher
IR-Spectroscopic Investigation of Geopolymer and CSH-Phase 109
Stability on Heating Temperature in Post-Fired Building Materials
C. H. Rüscher, E. Rigo, K. Unterderweide, H.-W. Krauss, and F. Jirasit
Mixed Alkali Regional Metakaolin-Based Geopolymer 123
Ruy A. Sá Ribeiro, Marilene G. Sá Ribeiro, Kaushik Sankar, Gregory
P. Kutyla, and Waltraud M. Kriven
Bamboo-Geopolymer Composite: A Preliminary Study 135
Ruy A. Sá Ribeiro, Marilene G. Sá Ribeiro, Kaushik Sankar, and Waltraud
M. Kriven
Metakaolin-Based Geopolymer Cements from Commercial Sodium 145
Waterglass and Sodium Waterglass from Rice Husk Ash: A
Comparative Study
Hervé K. Tchakouté and Claus H. Rüscher
Recycling of Grog by Addition Into Heavy Clay Ceramic 159
Manufacturing
C. M. F. Vieira and L. F. Amaral
VIRTUAL MATERIALS DESIGN AND CERAMIC GENOME
Q-State Monte Carlo Simulations of Magnetic Anisotropy Applied 169
to Paramagnetic and Diamagnetic Materials
J. B. Allen
First Principles Study of Defect Formation in Bulk B O 181
6
J. S. Dunn, S. P. Coleman, and M. Tschopp
Modeling of Damage in an MMC with Lamellar Microstructure 189
Romana Piat, Maria Kashtalyan, and Igor Guz
Micro-Computed Tomography Image Based Thermo-Elastic 201
Properties Studies of Freeze-Cast MMC
Yuri Sinchuk, Romana Piat, and Benoit Nait-Ali
vi · Developments in Strategic Ceramic Materials II
MATERIALS FOR EXTREME ENVIRONMENTS
Densification and Phase Evolution of SHS Derived Ti AlN Active 213
2
Precursor Powders During Hot Pressing Processes
L. Chlubny, J. Lis, P. Borowiak, K. Chabior, and K. Ziele ska
Max Phase Materials for Nuclear Applications 223
K. Lambrinou1, T. Lapauw, B. Tunca, and J. Vleugels
Analysis of Dynamic Young's Modulus and Damping Behavior of 235
ZrB -SiC Composites by the Impulse Excitation Technique
2
Akhilesh Kumar Swarnakar, Songlin Ran, and Jozef Vleugels
ADVANCED CERAMIC COATINGS
Study of Effect of Hafnium Addition on Oxidation Resistance of 249
(cid:2)NiAl Coatings Prepared by an In-Situ Chemical Vapour Deposition
Method
A. D. Chandio and P. Xiao
Mass Transfer Mechanism in Mullite Under Oxygen Potential 261
Gradients at High Temperatures
S. Kitaoka, T. Matsudaira, N. Kawashima, D. Yokoe, T. Kato, and M. Takata
EMERGING TECHNOLOGIES—CARBON NANOSTRUCTURES
SnO -Reduced Graphene Oxide Nanocomposite for Ethanol 273
2
Sensing at Room Temperature
C. A. Zito and D. P. Volanti
Author Index 281
Developments in Strategic Ceramic Materials II · vii
Preface
This CESP proceedings issue contains a total of 25 contributions from select sym-
posia held during the 40th International Conference on Advanced Ceramics and
Composites (ICACC), in Daytona Beach, FL, January 24–29, 2016.
The wide range of topics in this issue were presented in the following Symposia
and Focused Sessions:
• Symposium 2—Advanced Ceramic Coatings for Structural, Environmental, and
Functional Applications
• Symposium 10—Virtual Materials (Computational) Design and Ceramic
Genome
• Symposium 12—Materials for Extreme Environments: Ultrahigh Temperature
Ceramics and Nanolaminated Ternary Carbides and Nitrides
• Focused Session 1—Geopolymers and Chemically Bonded Ceramics
• Emerging Technologies Symposium on Carbon Nanostructures
The editors wish to thank the symposium organizers for their time and efforts,
the authors and presenters for their contributions; and the reviewers for their valu-
able comments and suggestions. In addition, acknowledgments are due to the offi-
cers of the Engineering Ceramics Division of The American Ceramic Society and
the 2016 ICACC program chair, Andrew Gyekenyesi, for their support. It is the
hope that this volume becomes a useful resource for academic, governmental, and
industrial efforts.
WALTRAUDM. KRIVEN, University of Illinois at Urbana-Champaign, USA
JINGYANGWANG, Institute of Metal Research, Chinese Academy of Sciences, China
YANCHUNZHOU, Aerospace Research Institute of Material & Processing
Technology, China
DONGMINGZHU, NASA Glenn Research Center, USA
GUSTAVOCOSTA, NASA Glenn Research Center, USA
ix
Introduction
This collected proceedings consists of 104 papers that were submitted and approved
for the proceedings of the 40th International Conference on Advanced Ceramics
and Composites (ICACC), held January 24–29, 2016 in Daytona Beach, Florida.
ICACC is the most prominent international meeting in the area of advanced struc-
tural, functional, and nanoscopic ceramics, composites, and other emerging ceramic
materials and technologies. This prestigious conference has been organized by the
Engineering Ceramics Division (ECD) of The American Ceramic Society (ACerS)
since 1977. This year’s meeting continued the tradition and added a few grand cele-
brations to mark its 40th year.
The 40th ICACC hosted more than 1,100 attendees from 42 countries that gave
over 900 presentations. The topics ranged from ceramic nanomaterials to structural
reliability of ceramic components, which demonstrated the linkage between materi-
als science developments at the atomic level and macro level structural applica-
tions. Papers addressed material, model, and component development and investi-
gated the interrelations between the processing, properties, and microstructure of
ceramic materials.
The 2016 conference was organized into the following 17 symposia and 5 Focused
Sessions:
Symposium 1 Mechanical Behavior and Performance of Ceramics and
Composites
Symposium 2 Advanced Ceramic Coatings for Structural,
Environmental, and Functional Applications
Symposium 3 13th International Symposium on Solid Oxide Fuel Cells
(SOFC): Materials, Science, and Technology
Symposium 4 Armor Ceramics: Challenges and New Developments
Symposium 5 Next Generation Bioceramics and Biocomposites
Symposium 6 Advanced Materials and Technologies for Direct Thermal
Energy Conversion and Rechargeable Energy Storage
Symposium 7 10th International Symposium on Nanostructured
Materials: Functional Nanomaterials and Thin Films for
Sustainable Energy Harvesting, Environmental and Health
Applications
xi
Symposium 8 10th International Symposium on Advanced Processing &
Manufacturing Technologies for Structural &
Multifunctional Materials and Systems
Symposium 9 Porous Ceramics: Novel Developments and Applications
Symposium 10 Virtual Materials (Computational) Design and Ceramic
Genome
Symposium 11 Advanced Materials and Innovative Processing ideas for
the Production Root Technology
Symposium 12 Materials for Extreme Environments: Ultrahigh
Temperature Ceramics (UHTCs) and Nano-laminated
Ternary Carbides and Nitrides (MAX Phases)
Symposium 13 Advanced Materials for Sustainable Nuclear Fission and
Fusion Energy
Symposium 14 Crystalline Materials for Electrical, Optical and Medical
Applications
Focused Session 1 Geopolymers, Chemically Bonded Ceramics, Eco-friendly
and Sustainable Materials
Focused Session 2 Advanced Ceramic Materials and Processing for
Photonics and Energy
Focused Session 3 Materials Diagnostics and Structural Health Monitoring of
Ceramic Components and Systems
Focused Session 4 Additive Manufacturing and 3D Printing Technologies
Focused Session 5 Field Assisted Sintering and Related Phenomena at High
Temperatures
Focused Session 6 Hybrid Materials and Processing Technologies
Special Symposium 40th Jubilee Symposium: Engineered Ceramics—Current
Status and Future Prospects
Special Symposium 5th Global Young Investigators Forum
Special Symposium Emerging Technologies Symposium: Carbon
Nanostructures and 2D Materials and Composites
The proceedings papers from this conference are published in the below seven
issues of the 2016 CESP; Volume 37, Issues 2–7, as listed below.
• Mechanical Properties and Performance of Engineering Ceramics and
Composites XI, CESP Volume 37, Issue 2 (includes papers from Symposium 1)
• Advances in Solid Oxide Fuel Cells and Electronic Ceramics II, CESP Volume
37, Issue 3 (includes papers from Symposia 3 and 14)
• Advances in Ceramic Armor, Bioceramics, and Porous Materials, CESP
Volume 37, Issue 4 (includes papers from Symposia 4, 5, and 9)
• Advanced Processing and Manufacturing Technologies for Nanostructured and
Multifunctional Materials III, CESP Volume 37, Issue 5 (includes papers from
Symposia 8 and 11 and Focused Sessions 4 and 5)
• Ceramic Materials for Energy Applications VI, CESP Volume 37, Issue 6
(includes papers from Symposia 6 and 13 and Focused Session 2)
• Developments in Strategic Materials II, CESP Volume 37, Issue 7 (includes
xii · Developments in Strategic Ceramic Materials II
papers from Symposia 2, 10, 12, Focused Sessions 1, and the Special Symposia
on Carbon).
The organization of the Daytona Beach meeting and the publication of these pro-
ceedings were possible thanks to the professional staff of ACerS and the tireless
dedication of many ECD members. We would especially like to express our sincere
thanks to the symposia organizers, session chairs, presenters and conference atten-
dees, for their efforts and enthusiastic participation in the vibrant and cutting-edge
conference.
ACerS and the ECD invite you to attend the 41st International Conference on
Advanced Ceramics and Composites (http://www.ceramics.org/icacc2017) January
23-28, 2017 in Daytona Beach, Florida.
To purchase additional CESP issues as well as other ceramic publications, visit
the ACerS-Wiley Publications home page at www.wiley.com/go/ceramics.
MANABUFUKUSHIMA,National Institute of Advanced Industrial Science and
Technology (AIST), Japan
ANDREWGYEKENYESI,Ohio Aerospace Institute/NASA Glenn Research
Center, USA
Volume Editors
August 2016
Developments in Strategic Ceramic Materials II · xiii