construction of admin section, uet lahore district lahore engineer's cost estimate civil works

66 Pages·2012·0.77 MB·English

CONSTRUCTION OF ADMIN SECTION, UET LAHORE DISTRICT LAHORE
ENGINEER'S COST ESTIMATE
CIVIL WORKS
1st BI-ANNUAL-2018 (1st January-2018 to 30th June-2018) DISTRICT LAHORE
Sr.
Item No. Description of Item Unit Qty Rate Amount
No.
1 C-3/21(b) Excavation in foundation of building, bridges and other
structures, including dagbelling, dressing, refilling around
structure with excavated earth, watering and rammiing lead
'upto one chain (30 m) and lift upto 5 ft. (1.5 m) in ordinary soil.
%0Cft 40677.8 6614.80
2 C-26/42 Spraying anti-termite liquid mixed with water in the ratio of 1:40.
%Sft 20879.8 227.45
3 C-6/5(i) Cement concrete plain including placing,compacting, finishing
andcuringcomplete(includingscreeningandwashingofstone
aggregate):Ratio 1:4:8 %Cft 3075.0 17625.80
4 C-6/6 a-ii Reinforced cement concrete in slab of rafts / strip foundation,
(3) baseslabofcolumnandretainingwalls;etcandotherstructural
membersotherthanthosementionedabovenotrequiringform
work (i.e. horizental in shuttering) complete in all respects:-
Type C (nominal mix 1: 2: 4) P.Cft 9206.3 259.50
5 C-6/6 a-i Reinforced cement concrete in roof slab, beams, columns
(3) lintels, girders and other structural members laid in situ or
precast laid in position, or prestressed members cast in situ,
completeinallrespects:-TypeC(nominalmix1:2:4),Ground
floor P.Cft 4097.7 356.30
6 C-6/6 a-i Reinforced cement concrete in roof slab, beams, columns
(3)+d lintels, girders and other structural members laid in situ or
precast laid in position, or prestressed members cast in situ,
complete in all respects:- Type C (nominal mix 1: 2: 4), add
extra for First Floor. P.Cft 4396.0 379.80
7 C-6/6 a-i Reinforced cement concrete in roof slab, beams, columns
(3)+d lintels, girders and other structural members laid in situ or
precast laid in position, or prestressed members cast in situ,
complete in all respects:- Type C (nominal mix 1: 2: 4), add
extra for 2nd Floor. P.Cft 4595.2 403.30
8 C-6/6 a-i Reinforced cement concrete in roof slab, beams, columns
(2) lintels, girders and other structural members laid in situ or
precast laid in position, or prestressed members cast in situ,
completeinallrespects:-TypeB(nominalmix1:1.5:3),Under
Plinth Level P.Cft 316.7 383.85
9 C-6/6 a-i Reinforced cement concrete in roof slab, beams, columns
(2) lintels, girders and other structural members laid in situ or
precast laid in position, or prestressed members cast in situ,
complete in all respects:- Type B (nominal mix 1: 1.5: 3),
Ground Floor P.Cft 675.7 383.85
10 C-6/6 a-i Reinforced cement concrete in roof slab, beams, columns
(2)+d lintels, girders and other structural members laid in situ or
precast laid in position, or prestressed members cast in situ,
complete in all respects:- Type B (nominal mix 1: 1.5: 3), add
extra for First Floor. P.Cft 675.7 407.35
11 C-6/6 a-i Reinforced cement concrete in roof slab, beams, columns
(2)+d lintels, girders and other structural members laid in situ or
precast laid in position, or prestressed members cast in situ,
complete in all respects:- Type B (nominal mix 1: 1.5: 3), add
extra for 2nd Floor. P.Cft 651.0 430.85
12 C-6/9(c) Fabrication of mild steel reinforcement for cement concrete,
including cutting, bending, laying in position, making joints and
fastenings,includingcostofbindingwireandlabourchargesfor
binding of steel reinforcement (also includes removal of rust
from bars):- Deformed bars (Grade-60) %Kg 82066.4 11632.20
13 C-7/4(i) Pacca brick work in foundation and plinth in Cement,sand
mortar. Ratio 1:6 %Cft 2174.7 19786.45
14 C-3/15(i) Filling,watering,rammingearthunderfloors(withsurplusearth
foundation). %0Cft 13559.3 3170.65
15 C-3/15(ii)+ Filling,wateringandrammingearthunderfloorswithnewearth
C-3/17 excavated from outside,lead upto 1km ).
(a+b) %0Cft 20954.8 9385.15
16 C-7/5(i) Pacca brick work in ground floor cement, sand mortar Ratio 1:5
%Cft 3051.5 21442.05
17 C-7/5(i)
Pacca brick work in ground floor cement, sand mortar Ratio 1:4
%Cft 453 21920.85
18 C-7/5(i)+ Pacca brick work in first floor cement, sand mortar Ratio 1:5
7/6(i)
%Cft 2203.7 22246.45
19 C-7/5(i)+ Pacca brick work in first floor cement, sand mortar Ratio 1:4
7/6(i)
%Cft 709.8 22725.25
20 C-7/5(i)+ Pacca brick work in second floor cement, sand mortar Ratio 1:5
7/6(ii)
%Cft 2220.5 23229.05
21 C-7/5(i)+ Pacca brick work in second floor cement, sand mortar Ratio 1:4
7/6(ii)
%Cft 739.9 23707.85
22 C-11/11(b) Cement plaster 1:5 upto 20' (6.00 m) height:- b) ½" (13 mm)
thick %Sft 28391.5 1757.15
23 C-11/9(b) Cement plaster 1:4 upto 20' (6.00 m) height:- b) ½" (13 mm)
thick %Sft 12120.3 1831.25
24 C-11/23(a-
Distempering:- New surface:- three coats
iii) %Sft 28391.5 395.40
25 C-13/32A Providingandapplyingweathershieldpaintofapprovedquality
(a-i,ii) onexternalsurfaceofbuildingincludingpreparationofsurface,
applicationofprimercompleteinallrespect:a)newsurface:ii)
Two coat. %Sft 2876.79 2200.50
26 C-7/30
Supplying and filling sand under floor; or plugging in wells. %Cft 2881.0 1922.00
27 C-6/2 Dryrammedbrickorstoneballast,1½"to2"(40mmto50mm)
gauge.
%Cft 3191.0 4262.30
28 C-6/5(f) Cement concrete plain including placing,compacting, finishing
andcuringcomplete(includingscreeningandwashingofstone
aggregate):(f) Ratio 1: 2: 4 %Cft 1457.9 22101.80
29 C-10/15(e) Providingandlayingtoppingofcementconcrete1:2:4,including
surface finishing and dividing in panels:-(e) 2"(50 mm) thick
%Sft 1220.7 4848.45
30 C-9/5 Single layer of tiles 9"x4½"x1½" (225x113x40 mm) laid over
4"(100mm)earthand1"(25mm)mudplasterwithoutBhoosa,
groutedwithcementsand1:3ontopofRCCroofslab,provided
with 34 lbs. per %Sft. or 1.72 Kg/Sq.m bitumen coating sand
blinded.
%Sft 6176.3 6398.65
31 C-26/37(ii) Supplying and laying polythene sheet over D.P.C. under floors
and on roofs, etc.ii)500 gauge (.005" thick) P.Sft 6716.8 4.00
32 C-9/45-b ProvidingandLayingInsulationmaterialofExtrudedPolystyrene
XPS in Rigid Insulation/Foam Boardon rooforwalls,Density 32-
38Kg/M, compressive strength250-400kpa,R-value5 per inch
thickness and water obsorbtion (1%byvolume,cel lstructure
clored cell) i/c cutting and placing in position complete in all
respect.(b)1-1/2" thick
%Sft 6176.3 8093.90
33 C-25/53(b) Providing and fixing all types of glazed aluminum windows of
anodized champagne color partly fixed and party sliding using
deluxesectionofapprovedmanufacturer havingFrame ofsize
100mmx30mm using frame at bottom, attopand side leaf leaf
frame sections of 60mmx23mm at top & bottom and size
45mmx25mmatcenterandsize45mmx25mmatsides,Jalileaf
frame size 43mmx13mm i/c fine quality aluminum jali, 5mm
thick imported tinted glass with rubber gasket using approved
standardlatches,wheel,stopper,brushchannelanglejointand
hardware etc.in all respect .b)2 mm thick
P.Sft 2518.0 761.80
34 C-12/50 Providing and fixing 1½" (40mm) thick solid flush door shutter
(Approved Factory Manufactured) with commercial ply (5 mm
thick) on both sides double pressed and deodar wood lipping
1½"x3/8" (40mm x 10mm) around shutter including chromium
platedfitting,ironhingeswithaluminiumkickplate22SWGon
both sides & finger plate complete in all respect. P.Sft 216.30 365.25
35 C-12/15 a ProvidingandfixingM.S.sheethollowpressedframeofdoors,
windows, C. windows, etc. (chowkat only) of 20SWG welded
with M.S. flat 6"x 1¼" x 1/8" (150mmx30mmx3mm) M.S.
holdfast 9"x1"x1/8"(225mmx25mmx3mm) welded/screwed 4"
(100mm)longironhinges,includingfillingchowkatwithcement
sand mortar 1:8 and embedding holdfast in cement concrete
1:2:4, complete in all respects:a) single rebate
P.Sft 576.8 139.95
36 C-9/20 a Castironrainwaterdownpipefixedinposition,excludingheads
and shoes, but including painting and clamps, etc:a)
4" dia (100 mm) cast iron down pipe. Rft 104.0 218.30
37 C-9/21 Rain water down pipe cast iron head fixed in place, including
cost of clamp holdfast and painting. Each 3.0 537.35
38 C-9/22 Shoes, bends or offsets for cast iron rain water down pipe,
including fixing and painting. Each 3.0 326.00
39 C-9/15
Khuras on roof 2'x2'x6" (600 x 600 x 150 mm)
Each 3.0 496.00
40 C-25/10+ Fabricationofheavysteelwork,withangle,tees,flatironround
11 iron and sheet iron for making trusses, girders, tanks, etc.,
including cutting, drilling, revitting, handling, assembling and
fixing, including erection in position. (Steel Stairs) %kg 3161.9 13481.40
41 C-6/33(a-ii)Providingandlayingdampproofcourseofcementconcrete1:2:
4(usingcement,sandandshingle),includingbitumencoating:-
(a) with one coat bitumen and one coat polythene sheet
500gauge ii) 2" thick (50 mm) %Sft 290.26 5060.00
42 C-13/9(i) Bitumencoatingtoplasteredor cementconcrete surface:-i)20
lbs. per 100 Sft. (9.07 Kg per Sq.m) %Sft 540.55 1025.70
Total of MRS ITEMS Total
1 NSI Providing and laying structural pad for foundation made of
selected granular fill material (Mixture of 50% gravel and 50%
sand of approved quality and grade) including placing, mixing,
spreading and compaction of sub-base material to required
depth, grade to achieve 95% maximum modified AASHTO dry
density, including carriage of all material to site of work
complete in all respect as approved by the Engineer incharge.
P.Cft 9103.84
2 NSI Providing And Laying Glazed Ceramic Tiles For Flooring Size
12"X18”X3/8" Laid Over 3/4" Thick Cement Sand Mortar (1:2)
I/C Filling Joints In White Cement And Matching Pigment I/C
CuttingCharges(Masterorequivalent)CompleteInAllRespect
As Approved & Directed By The Engineer Incharge. P.Sft 911.07
3 NSI Providingandlayingglazedceramictilestexturelightforskirting
/dadosize12"x18”x3/8"laidover3/4"thickcementsandmortar
(1:2) i/c filling joints in white cement and matching pigment i/c
cuttingcharges(Masterorequivalent)completeinallrespectas
approved & directed by the engineer incharge.
P.Sft 3466.45
4 NSI Providing and laying porcelain tiles flooring 24"x24"x3/8" plain
lightcolorlaidinwhitecementandmatchingpigmentover3/4"
thick cement sand mortar (1:2) i/c filling joints in whitecement
and matching pigment complete in all respect.(Master or
equivalent).
P.Sft 14332.16
5 NSI Providing and laying porcelain tiles skarting dado 24"x24"x3/8"
plainlightcolorlaidinwhitecementandmatchingpigmentover
3/4" thick cement sand mortar (1:2) i/c filling joints in white
cement and matching pigment complete in all respect.(Master
or equivalent) P.Sft 874.22
6 NSI Providing and installing wooden HDF flooring size 8"x40" 8-
12mm thick complete in all respect as per drawings and
direction by the Engineer Incharge.
P.Sft 2795.64
7 NSI Providing And Fixing 3/4" Thick Pre-Polished Glaxy Black
Granite Full Width Area Above 2 Sft Laid In White Cement
Matching Pigment 3/4" Thick Cement Sand Mortar (1:2) I/C
FittingJointsInWhiteCement&MatchingPigment I/CMaking
GolaOnExposedEdgesCompleteInAllRespectAsApproved
By The Engineer Incharge. (Stairs) P.Sft 144.69
8 NSI Providing and laying marble of Glaxy Black Granite size
2'x4'x3/8"laidinwhitecementandmatchingpigmentover3/4"
thick cement sand mortar (1:2) i/c filling joints in whitecement
and matching pigment and chemical polishing complete in all
respect as approved & directed by the engineer incharge. P.Sft 562.60
9 NSI Providing and fixing UPVC Doors 38mm thickness i/c deluex
matching color UPVC frame matt or glossy finish having color
(white-Gray-Marble Gray-Oak Wood- Dard Oak Wood, Coffee
Wood Honey Pine Wood-Mahagony-Marry Gold-Chocolate
Brown-Honey Dew) i/c all accessories i/c mortice locks
complete in all respect as approval by the Engineer Incharge.
P.Sft 360.50
10 NSI Providing and fixing all types of glazed open able aluminum
double door partly glazed and partly fixed with aluminum
claddingsheetforprotectionagainststretcherhitcomprisingof
anodized bronze color using deluxe section of M/S Al-Cop or
PakistanCableshavingChowkatframeofsize100mmx44mm
x 2mm (D10) with leaf frame of top & bottom size 80mm x
44mm x 2mm (D33) side leaf frame 80mm x 44mm x 2mm
(D35). Center railframe 42mm x30mm x2mm (D52) partition
for fixing strips 2mm (D33). Handles full width 2mm (D38B).
corrugated aluminum strips all section of 2mm thickness i/c
8mm thick imported glass, imported hydraulic door closer,
rubber gasketusing approvedqualitystopper, angle joints and
hardware etc i/c cost of all labour & material complete in all
respect as approved by Engineer Incharge. P.Sft 630.88
11 NSI
Providing and laying tiles (rak 49-sgpinline-bl) dark grey color
forskirting/dadosize18x36"laidover3/4"thickcementsand
mortar (1:2) i/c filling joints in white cement and matching
pigmenti/ccuttingchargescompleteinallrespectasapproved
& directed by the engineer incharge. (rak or equivalent)
P.Sft 3191.2
12 NSI Providing and fixing 12 mm thick plain glass partition (ghani,
gunjorequivalent)withaluminiumframeofapprovedthickness
1.6 mm (chawla or equivalent) aluminium sections of wooden
finishi/cthecostofholdingthepartitionswithslabbeams,walls
and door closer machine, handle 18", silicone complete in all
respect as per drawing & specifications/standard as per
instruction of Engineer Incahrge. P.Sft 4149.6
13 NSI
Providingandapplyingrockwallfinish,completeinallrespectas
per drawing and instructions of engineer inccharge. P.Sft 9583.05
14 NSI Providing & Fixing M.S facade work having pipe section 6"x8"
14 swg frame, 2"x6" 16 swg & 4"x4" 16 swg pargola i/c paint
completeinallrespectasperdrawing,design&asperdirection
of engineer incharge. P.Job 1.00
15 NSI Providing and fixing 12 mm thick plain glass partition (ghani,
gunj or equivalent) with frameless 12 mm glass door having
outer frame of1.6mm almuniumsectioninwoodenfinishwith
diffuser sheet i/c the cost of holding the partitions and door
closer machine, handle 18", complete in all respect as per
drawing&specifications/standardasperinstructionofEngineer
Incahrge. P.Sft 2871.95
16 NSI Providing and fixing ply wood partition, 1/2" thick ply wood
doublesheet,2'x2'woodenframemadeof2"x2"woodenstrips,
gola at ends i/c polishing complete in all respect as per
drawings/design and instructions of engineer incharge P.Sft 2291.24
17 NSI Providing and fixing of False ceiling consisting of lamenated
GypsumBoard (onesidelaminated)of size600mmx600mm
x7.5mm over'aluminium Tee's 1"x1"sizeat2'-0"x2-0"center
to center longituidlnally and transversally &alminium angle of
size 1" x 1" at cornes/ends (concealed frame),including all
accessries such as steel hanging wire, hooks, screws,nails,
rowel plugs, Cross Joints etc. complete in all respect,and as
approved by the Engineer Incharge. P.Sft 16840.46
18 NSI ProvidingandfixingofFalseceilingofplasterofparisincluding
finishes as per drawings/design and instructions of engineer
incharge. complete in all respect
P.Sft 777.65
CONSTRUCTION OF ADMIN SECTION, UET LAHORE DISTRICT LAHORE
ENGINEER'S COST ESTIMATE
ELECTRICAL WORKS
Total
Item Unit Rate
Description Unit Qty Amount
No. (Rs.)
(Rs.)
(i) (ii) (iii) (iv) (v) (vi)
SECTION - A
DISTRIBUTION BOARDS
Supply at site, fabrication, installation, testing and commissioning of
Main Distribution Board (MDB) , made of sheet steel 14 SWG,
degreased and derusted, with 2 coats of antirust paint, 2 coats of
powdercoatedpaintofapprovedcolour,protectionclassificationIP-44,
totally enclosed indoor floor mounting cubicle type in free standing
design, with hinged door, handle including cost of all auxiliaries,
internal wiring, designation lables on MCCBS, grounding bar suitable
for system Voltage 415 V, 50 Hz, 3 Phase and neutral bus bars of
99.9% electrolytic copper, including cost of cable terminal blocks
wiringfrom breakers, brass cableglands, allaccessories completein
all respects. All incoming and outgoing breakers shall be accessible
onlybyopeningthefrontdoorhavingfurtherM.S.sheetcovergaskets
shall also be provided where necessary.
All MCCBs shall be suitable to operate without any derating at 40°C
ambienttemperatureandshallbeofonemakeonly.ThesidesofMDB
shallalsohavelouversatbottomandtoponsidesofpanelforhotair
exhaust,wiremeshetc.Thebackofthepanelshallbelockabledoor
instead of bolted and shall conform to single line diagram
C-A-01 MAIN DISTRIBUTION BOARD ( MDB )
INCOMING
01 No 400Amps TP MCCB RC-36kA with shunt trip (Adjustable)
01 Nos Digital Voltmeter scaled 0-500 Volts of appropriate sizes.
01 Nos. Voltmeter selector switch
03 Nos. Air cooled ring type Current Transformers ratio 400/5 Amps
having suitable output and accuracy for Ammeter.
01 Nos. Ammeter selector switch
01 No Digital Ammeter scaled 0-800 Amps of appropriate sizes.
06 Nos. 2 Amp fuses
03 Nos. R-Y-B indication lamps.
04 Nos insulated copper bus bars of electrolytic copper 99.9% .
01 Nos Surge Protective Device( SPD) 3P& 1N Type-1 and 40kA
rated .
01 Nos Phase failure and phase reversal relay.
01NoThermostaticallycontrolled230Volts robustexhaust fans6"/8"
dia.tobeinstalledonfrontofMDBforhotairexhaustincludingcostof
thermostatON-OFFswitcheswiremeshandallnecessaryaccessories
/ wiring, complete in all respects.
OUTGOING
01- 125 Amps TP MCB RC=18KA
Total
Item Unit Rate
Description Unit Qty Amount
No. (Rs.)
(Rs.)
06- 40 Amps TP MCCB RC=15KA
07- 80 Amps TP MCCB RC=15KA
02- 32 Amps TP MCB RC=15KA
03- 10 Amps SP MCB RC=10KA
Automatic Power Factor Improvement Plant (PFIP) to be installed
inside Main Distribution Board in the Electrical Room consisting of
capacitors, Triple pole Air Break Contactors, HRC fuse bases and
links,06stepsDigitaltypeAutomaticreactiverelaywithallnecessary
protective devices, “ON” indication lamp, Digital Power Factor R.M.,
pushbuttons,auxiliarycontactors,hand/off/autoswitch,discharging
chokes, control fuses, fuse puller. The sides of PFIP shall also have
louversatbottomandtoponexternalsidesofpanelforhotairexhaust
complete in all respect.
(6 x 12.50 KVAR ) 75KVAR
--------------------
= 75 KVAR
Brass cable glands suitable for 4 core PVC/PVC cu.cond. cable
Job 1
600/1000 V. grade as per drawings
DISTRIBUTION BOARD DB-LGF1,DB-LFF1,DB-LSF1, DB-LGF2,
C-A-02
DB-LFF2, DB-LSF2
Fabrication, supply at site, installation and commissioning of
DistributionBoards(DB)concealedtypebackboxmadeofsheetsteel
16SWGanddoorof18SWG,withflexibleearthingstraps,degreased
and de-rusted, zinc phosphated, finished with electro-static powder
coating of 15 micron thickness in approved color, panel housing to
complywithprotection class IP-54, concealed type,with hingeddoor,
lockable handle, all auxiliaries, internal wiring, designation labels on
MCCBS, earthing bar, numbering beads on the control wires, panel
suitable for system Voltage 415 V, 50 Hz, 3 Phase and neutral, bus
bars of 99.8% purity electrolytic copper, including cost of cable
termination lugs, brass cable glands for incoming & outgoing cables,
wiring from breakers, indication lamps, instruments and control all
accessories complete in all respects. All incoming and outgoing
breakers shall be accessible by opening the front door having
additional M.S. sheet cover on breakers.
Gasketsshallalsobeprovided wherenecessary. AllMCCBs shallbe
suitabletooperatewithoutanyde-ratingat40°Cambienttemperature
and shall be of one make only and not a mixture of more than one
make. Circuits layout shall conform to the single line diagrams
INCOMING
01-40 Amps TP MCCB RC=18KA
03 - 2 Amps Protection fuses.
03- R-Y-B indication lamps.
OUTGOING
06-10Amps SP MCB RC=10kA
08-16Amps SP MCB RC=10kA
10-20Amps SP MCB RC=10kA
01- 20 Amps TP MCB RC=10 KA Job 6
DISTRIBUTION BOARD DB-PGF1,DB-PFF1,DB-PSF1,DB-PGF2,DB-
C-A-03
PFF2, DB-PSF2
Description same as item no:A06 but with following components.
INCOMING
01-80 Amps TP MCCB RC=18KA
03 - 2 Amps Protection fuses.
03- R-Y-B indication lamps.
OUTGOING
16-10Amps SP MCB RC=10kA
14-16Amps SP MCB RC=10kA
Total
Item Unit Rate
Description Unit Qty Amount
No. (Rs.)
(Rs.)
10-20Amps SP MCB RC=10kA
03- 20 Amps TP MCB RC=10 KA Job 6
Sub Total Part -A Rs.
SECTION - B
LIGHT FIXTURES
Supply,installation,testingandcommissioningoffollowinglightfittings,
ceiling,recessed,wallmountedmadeofMSbody22SWGdegreased
andderustedwithwhiteenamellednonyellowingpaint.Completewith
internal wiring, Grounding terminal , complete in all respects.
C-B-01 2x28WattfluorescentlightfixturecompletewithT5lamps,Philipstype
No. 2
TMS-215/228 or equivalent.
C-B-02 1x28WattfluorescentlightfixturecompletewithT5lamps,Philipstype
No. 1
TMS-215/128 or equivalent.
C-B-03 1x18 Watt LED light fixture complete with driver and hanging
arrangements, similar to Philips type GMP118 or equivalent( FOR No. 18
WASHROOM MIRROR LIGHT).
C-B-04 1x36 Watt LED light fixture IP-65 rated, similar to Future technology
light with hanging accesories or equivalent( FOR KITCHEN AND No. 16
OFFICE LOCATIONS-SPECIFIC).
C-B-05 1x36 Watt LED light fixture complete with driver and hanging
arrangements, similar to philips type GMP- 136 or equivilent( FOR No. 2
WASHROOM MIRROR LIGHT)
C-B-06 1x5 watt LED reflector ceiling light fixture with frosted lens, complete
No. 114
with driver, ROUND model or equivalent( FOR CORRIDORES).
C-B-07 1x10wattLEDreflectorceilinglightfixturewithfrostedlens,complete
No. 22
with driver, ROUND model or equivalent( FOR WASHROOMS).
C-B-08 1x36wattLEDreflectorceilinglightfixturewithfrostedlenssize2'x2',
No. 164
complete with driver, SQUARE model or equivalent( FOR OFFICES).
C-B-09 1x18WattLEDfixture,similartoPierlitemake,140235CameaWHor
No. 12
equivalent( FOR OUTDOOR WALLS)
C-B-10 1x10WattLEDexitlight,similartoPierlitemodelStingrayST10MPor
No. 10
equivalent.
C-B-11 2X18Watt,EmergencyTwinSpotlight,Non-maintainedwith3hours
No. 7
Battery Backup or equivalent.
368
Sub Total Part -B Rs.
SECTION - C
MISCELLANEOUS FITTINGS
Supply,installation, testing &commissioning of Ceiling/ Exhaust fan.
The ceiling/exhaust fan shall comprise circular fan metallic/ plastic
body, metallic fan blades, down rod (if necessary) of suitable dia &
length, AC capacitor, internal wiring, terminals all installation &
operational accessories as per tender specifications, as per site
requirements and as directed by the Engineer.
C-C-01 56" dia ceiling fan suitable to give an air displacement of minimum
9000 Cu. ft./ min. Fan shall be made with 99% purity Copper windings. No. 1
Total
Item Unit Rate
Description Unit Qty Amount
No. (Rs.)
(Rs.)
C-C-02 24"diabracketfanwithfanbracketsandcontrollingcord.Fanshallbe
made with 99% purity Copper windings. No. 72
C-C-03 10 '' dia exhaust fan with plastic body,fan blades and louvers No. 14
C-C-04 12 '' dia exhaust fan with metallic body,fan blades and louvers No. 2
89
C-C-05 Fanhooktobeprovidedintheslabforcablepullingandinfuturefan
installation. No. 78
Sub Total Part -C Rs.
SECTION - D
WIRING IN CONCEALED CONDUITS
C-D-01 Distribution board to Switch
WiringoflightcircuitfromDistributionBoardtoswitch,withThreenos.
single core 2.5 Sqmm PVC insulated 450/750 volts grade stranded
copper conductor cables in concealed PVC conduits (conduits partly
shared) including PVC conduit, and conduit accessories etc. No. 36
C-D-02 Switch to light point & point to point wiring
Wiring from switch to light or fan point with 3 nos. single core 1.5
SqmmPVCinsulated450/750Voltsgradestrandedcopperconductor
cables in concealed PVC conduit including PVC conduit, Conduit
accessories,etc.(conduit partly shared). No. 421
C-D-03 Switch to Switch
Wiringfrom switchto switch with3nos.singlecore2.5SqmmPVC
insulated 450/750 Volts grade stranded copper conductor cables in
concealed PVC conduit including PVC conduit, Conduit
accessories,etc.(conduit partly shared). No. 82
C-D-04 Distribution board to General Purpose ( 5A/13A) socket
Wiring of circuit from Distribution Boardto5A/13A,230Voltswith3
nos. single core 4 Sqmm PVC insulated 450/750 Volts graded , 2&3
pin switched socket, stranded copper conductor cables in concealed
PVC conduit, including conduit accessories, etc(conduit partly shared) No. 188
C-D-05 Socket to Socket
Wiringfrom5Amps,2&3pinsockettosocketwith3nos.singlecore
2.5SqmmPVCinsulated450/750Voltsgradesolidorstanerdcopper
conductor cables in concealed PVC conduit including PVC
conduit,Conduit accessories, etc complete. (conduit partly shared) No. 75
C-D-06 Distribution board to 15Amps socket
Wiringof circuit from distribution boardto20A,230Volts,DPswitch
with 3 nos. single core 4 Sqmm PVC insulated 450/750 Volts grade No. 15
stranded copper conductor cables in concealed PVC conduit including
C-D-07 Distribution board to 20Amps switch for 2T A/Cs socket
Wiringof circuit from distribution boardto20A,230Volts,DPswitch
with 3 nos. single core 6 Sqmm PVC insulated 450/750 Volts grade
strandedcopperconductorcablesinconcealedPVCconduitincluding
PVCconduit,Conduitaccessories,etc(conduitpartlysharedfor2ton
A/C) (Optional) No. 1
Total
Item Unit Rate
Description Unit Qty Amount
No. (Rs.)
(Rs.)
Sub Total Part -D Rs.
SECTION-E
LT CABLES
Supplyatsite,installation,testingandcommissioningofPVCinsulated
non armoured copper conductor cable 600 / 1000 Volt grade (or
otherwise mentioned in cable description ) in prelaid conduits /
trenches to be installed as per routes shown on drawings including
costofallnecessarymaterials,connections,identificationtags,cables
lugsproperlycrimpedat both endsforthefollowingsizescompletein
allrespects.Actuallengthofcablestobeinstalledshallbepractically
measuredatsitebytheContractor,dulyauthenticatedbytheEngineer
beforeplacingtheorderwiththemanufacturer,however,approximate
lengthofcablesareshownherewith.Paymentsshallbemadeasper
actual length installed.
C-E-01 185 sq mm , 4 core PVC/PVC stranded copper conductor cable R.Mtr 6 5
C-E-02 25 sq mm , 4 core PVC/PVC stranded copper conductor cable R.Mtr 1 15
C-E-03 16 sq mm , 4 core PVC/PVC stranded copper conductor cable R.Mtr 1 25
3 Core Cable PVC/PVC
C-E-04 3 core 2.5mmsq Cu/PVC/PVC R.Mtr 3 5
Sub Total Part -E Rs.
SECTION - F
WIRING ACCESSORIES
Supplyat site,installation, testingand commissioning of thefollowing
wiring accessories, complete in all respects.
C-F-01 10Amps,250Voltsoneway,Oneganglightcontrolswitchesincluding
appropriate size concealed MS, powder coated back box. No. 15
C-F-02 10Amps,250Voltsoneway,Twoganglightcontrolswitchesincluding
appropriate size concealed MS, powder coated back box. No. 23
C-F-03 10 Amps, 250Volts one way, Three gang light control switches
including appropriate size concealed MS, powder coated back box. No. 12
C-F-04 10Amps,250Voltsoneway,Fourganglightcontrolswitchesincluding
appropriate size concealed MS, powder coated back box. No. 30
C-F-05 10Amps,250Voltsoneway,Fiveganglightcontrolswitchesincluding
appropriate size concealed MS, powder coated back box. No. 13
C-F-06 10Amps, 250Volts one way,Sixganglightcontrolswitchesincluding
appropriate size concealed MS, powder coated back box. No. 8
C-F-07 10Amps,250Voltsoneway,Eightganglightcontrolswitchesincluding
appropriate size concealed MS, powder coated back box. No. 14
C-F-08 10Amps,250Voltstwoway,oneganglightcontrolswitchesincluding
appropriate size concealed MS, powder coatedback box. No. 3
118