concrete accessories - Dayton Superior

492 Pages·2014·5.98 MB·English

ACCESSORIES T
®
S
I
L
® Concrete Construction E
C
I
R
P
Chemicals Shoring and Forming Paving
Prices Effective January 1, 2014
DAYTONSUPERIOR.COM
®
®
Policy
Minimum order:
1. There will be a $10.00 minimum order charge for all orders less than $250.00 net purchase price. Exceptions will be made for sample product orders
shipped for customer approval and special tie orders shipping direct to a dealer’s customer.
Less than full box/carton/container:
2. Pricing for all hardware items is based on full box/carton/container. Less that full containers (partial boxes) will be invoiced with a $15.00 charge for
each line item. Packaging standards can be viewed by clicking on the link by the Forming price book.
Ties
3. All made to order/special ties ordered in quantities of less than 100 pieces will be assessed a set-up charge of $25.00 for each line item. Additionally,
stocking ties ordered in quantities of less than full cartons/bundles will be assessed $25.00 per line item. Packaging standards can be viewed by click-
ing on the link by the Forming price book.
REtuRn Policy
A. Return Policy on Non-Defective Sale Items – for any sale material that a customer wishes to return to Dayton Superior for credit, the customer must first
contact Dayton Superior. It must be mutually agreed that the material can be returned and a minimum 25% restocking fee will be charged. Credit
will be issued against the customers account when Dayton Superior receives the approved return, in the original packaging and in resalable condition.
Credit will be issued in the following amounts:
i. Up to 30 days from the date of purchase – full credit less 25% restocking charge.
ii. 31-90 days from the date of purchase – full credit minus 40% restocking charge.
iii. No returns will be accepted after 90 days from date of purchase.
iv. All chemical product returns must have pre-approval and will be approved at Dayton Superior’s discretion based on remaining shelf life.
v. Configured-to-Order and Made-to-Order items are not eligible for return.
vi. Any credit amount to be issued will be reduced by handling charges necessary to repackage returned items into resalable condition.
Dayton Superior will not accept the return of merchandise without prior written authorization. Customer may initiate a return by contacting their Customer
Service Representative to obtain a return material authorization (RMA) number. The customer must prepay freight charges from the customer to a Dayton
Superior location. Returns submitted without an RMA will not be accepted. The RMA will expire 30 days from date of issue. If the material is not received
within 30 days of the RMA Acknowledgement date, the customer must begin the approval process again if they still wish to return the material.
B. Return Policy for Rental Items – Customer must notify Dayton Superior 24 hours prior to returning rental items either from their warehouse or from a
job site. A packing slip is required on all returns. Material is expected to be returned in the same condition as it was received, or additional charges may
apply. Rental charge will stop after receipt of rental items at a Dayton Superior service center. For any damaged material, the customer will be invoiced
for replacement cost at list price less standard discount or appropriate repair charge. Damaged material invoiced to the customer at list price, less
standard discount will be held at plant locations for 15 days, after which time the material will be scrapped. Cost of reasonable maintenance on rental
material will be borne by Dayton Superior. Excessive maintenance costs on rental material will be invoiced to customer. In all cases, the customer will
pay the applicable freight.
C. Returned Material – All material being returned must have been initially purchased from Dayton Superior.
D. Cancellation Policy – Verbal orders will be accepted by Dayton Superior Customer Service; however, the customer has the responsibility of checking the
order acknowledgment for accuracy. Orders can be canceled by mutual agreement between customer and Dayton Superior. Cancellation of orders can
only be accomplished by notifying the appropriate Dayton Superior location. All canceled orders already in the process of being shipped/manufactured
are subject to a cancellation charge. If the material cannot be placed in Dayton Superior inventory, the full purchase price will be charged. If the material
can be placed into Dayton Superior inventory a 15% service charge will be invoiced. If the material was in the process of being manufactured, charges
to cover Dayton Superior costs will be invoiced to the customer.
®
®
Dayton Superior Corporation (“Dayton”)
Terms and Conditions of Rental/Sale(“Terms”)
These Terms apply to all Dayton sales and rentals of products (“Product(s)”). If Dayton issues a quotation or proposal (“Quotation”) to its customer (“Customer”) that
the Customer timely accepts by issuance of a purchase orderor by acceptance of Products(or by other means acceptable to Dayton), the Quotationandthese Terms will
constitute the entire agreementbetween Dayton and Customer with respect to the Products (collectively, the “Contract”). Otherwise, the entire Contract shall consist of
Dayton’s order acknowledgement and these Terms. By issuing a purchase order against a Quotation or accepting Products, Customer expressly agrees that theseTerms
govern and that no other terms shall applyunless in writing and signed by an authorized representative of Dayton. Dayton expressly rejects any additional, inconsistent
or conflicting terms proposed by Customer. Clericalerrors are subject to correction in all cases.
1. Purchase Price or Rental Charge; Payment. Quoted prices or rental charges are firm only for orders placed against the Quotation within 30 days after it is
issued and are valid only if all items, quantities and sizes listed in the Quotation or order acknowledgement are purchased or rented and only if the Products are to be
shipped within Dayton’s normal production and shipping schedule. Orders otherwiseare subject to revised pricing. Quotation prices and rental charges do not include,
but are subject to,taxes and all other governmental charges that may be imposed at any time, including sales, use and similar taxes. Dayton shall invoice and Customer
shall pay or reimburse Dayton for any such amounts. Purchase charges shall be invoiced at the time of shipment. Customer is responsible for payment of all made-to-
order products, even if Customer cancels the order and the products do not ship. Rental charges shall be invoiced monthly, with charges beginningon the date of
shipmentand endingon the date the Products are returned to Dayton’s warehouse, as shown on shipping documents. Customer agrees to pay for a minimum of one
month’s rental, with any additional partial months being pro-rated, with each week assumed to have sevendays and each month assumed to have twenty-eightdays.
Except as expressly agreedotherwisein the Quotation or order acknowledgment, Customer shall pay each invoicewithin 30 days after the date of invoice. All
payments shall be made without set-off, deduction or counterclaim. Interest at the rate 1-1/2 % per month, or the maximum allowable by law, shall apply to balances on
invoices 31 days past dueand until paid.
2. Delivery; Risk of Loss; Inspection and Claims. Unless expressly agreed in the Contract, Dayton does not guarantee or assume any liability for failure to meet
any delivery date proposedor requestedby Customer or Dayton. In the case of paving Products, Customer shall provide Dayton with a requested delivery date at the
time of order. Prior to the order entering production, Dayton will contact Customer to verify the requested delivery date and Customer shall, by electronic mail, fax, or
letter, confirm in writing the requested delivery date. Dayton will not begin production on the order until this written confirmation is received from the Customer.
Unless otherwise agreed at the time of order, allProducts will ship FOB Dayton’s shipping point, prepaid,via Dayton’s selected carrier and Customer shall pay all
transportation charges from Dayton’s shipping point to destination, with shipping charges added to Customer’s invoice. Title and risk of loss shall pass to Customer
upon delivery to the carrier at Dayton’s shipping point. Customer shall inspect Products upon receipt at the destination and notify Dayton in writing of any shortages or
readily ascertainable damaged or defective Products within72 hours after delivery. Failure of Customer to timelynotify Dayton shall relieve Dayton of any liability.
All claims for loss or damage in transit must be made by Customer against the carrier.
3. Customer Pick-up/3rdParty Carriers. At the time of order, Customers may arrange to pick up orders when available at identifiedDayton facilities and/or
request Collect or 3rdparty billing on a Customer-specified carrier if preferred (FOB Origin). For LTL/parcel shipments requested Collector 3rdparty bill, Dayton will
make the arrangements directly with the Customer-specified carrier. For truckload shipments,the Customer may make their own arrangements or provide carrier
information for DSC to make the arrangements. The following guidelines will also apply.
a. Accessory and Chemical Products—Inthe case of Customer pick-upor Customer arranged freight, DSC will hold the ordered Productson its docks for a
maximum of five (5)business daysfrom the date of order. If the Customer/Carrier fails to pick up the ordered Products by the end of the fifth business
day, Customer agrees that either: (i) by the end of the sixth business day, Customer will instruct DSC to arrange for freight and have the freight charges
added to the Customer’s order and invoice; (ii) if the Products are not made-to-order, the order will be cancelled and Customer agrees to payDaytona
restocking fee of 25% of the value of the order, whichwill be invoiced to the customer; or (iii) if the Products are made-to-order, the order will be
cancelled, Customer shall pay Dayton the full price of the order and Dayton shall have no obligation to retain or store the Products.
b. Paving Products—In the case of Customer pick-up or Customer arranged freight, DSC will hold the ordered Products on its docks for a maximum of ten
(10) business days from the date of order. If the Customer/Carrier fails to pick up the ordered Products by the end of the tenth business day, Customer
agrees that either: (i) by the end of the eleventh business day, Customer will instruct DSC to arrange for freight and have the freight charges added to the
Customer’s order and invoice; or (ii) it will incur a $500.00 per day handling and storage charge that will be added to the Customer’s invoice until the order
is picked up or delivered.
c. Forming Products—In the case of Customer pick-up or Customer arranged freight, Customer shall provide Dayton with a requested delivery date at the
time of order. Dayton will contact Customer to verify the requested delivery date and Customer shall, by electronic mail, fax, or letter, confirm in writing
the requested delivery date. Dayton will not begin pulling the order for shipping until this written confirmation is received from the Customer. Dayton will
hold the ordered Products on its docks for a maximum of ten (10) business days from the date of order. If the Customer/Carrier fails to pick up the ordered
Products by the end of the tenth business day, Customer agrees that either: (i) by the end of the eleventh business day, Customer will instruct DSC to
arrange for freight and have the freight charges added to the Customer’s order and invoice; or (ii) it will incur a $500.00 per day handling and storage
charge that will be added to the Customer’s invoice until the order is picked up or delivered.
4. Ownershipand Useof Rental Products. Dayton shall retain title to rental Products. Customer shall have the option to purchase rental Products if and to the
extent setforth in the Contract,subject to theseTerms. Customer shall not make any alterations, additions or improvements to, and shall not deface, remove or cover
any Dayton markings on, rental Products without Dayton’s priorwritten consent. Upon request, Customer shall advise Dayton as to the exact location of rental
Productsandagrees not to move rental Products without Dayton’s prior written consent. Dayton shall have the right to enter Customer’s premises or other location of
the rental Productsat reasonable times and with reasonable notice to Customer, to inspect Daytonrental Products. Customer shall keep rental Products free and clear of
all liens, levies and encumbrances (other than those of Dayton). Customer irrevocably authorizes Dayton to execute and/or file a financing statement or other notice in
any jurisdiction with respect to the lease created by the Contract. Rental Products do not include wood of any kind,except as part of a prefabricated panel or other
prefabricated rental Product. Customer shall be responsible for unloading, cleaning, assembling and erection of rental Products. Customer shall cause rental Products
to be used only by competent operators in a safe and proper manner in compliance with all applicable laws, rules, regulations and the manufacturer’s instructions
(including maintenance) and solely for the purposes for which they are intended.
5. Limited Warranty. Dayton warrants, for a period of 60 days from the date of shipment (threeyears from the date of shipment in the case of formwork, excluding
any consumable Products included with such formwork), that Products and any associated application drawings and engineering services provided by Dayton
(“Ancillary Services”) will be free from defects in material and workmanship and, in the case of custom designed formwork, that the formwork will meet the
specifications set forth in the design drawings approved by Dayton and Customer. Any claim under this warranty must be made in writing within such warranty period.
If any Product and/or Ancillary Servicecovered by a timely claim are found to be defective, Dayton will, within a reasonable time, make any necessary repairs or
corrections or,at Dayton’s option, replace the Product. Unless pre-authorized by Dayton in writing, Dayton will not accept any charges for correcting defects or accept
®
®
the return of any Product. This warranty will not apply to any Products thathave been subjected to misuse, neglect, storage damage, misapplication, accident or any
other damage caused by any person other than Dayton, or thathave not been maintained in accordance with Dayton’s specifications. THISLIMITED WARRANTY
IS IN LIEU OF ALL OTHER WARRANTIES ASTO THE PRODUCTS AND ANCILLARY SERVICES. DAYTON MAKES NO OTHER WARRANTIES
OR GUARANTEES, EXPRESS OR IMPLIED, AND EXPRESSLY EXCLUDESANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE OROTHERWISE. THE REPAIR/REPLACEMENT REMEDIES SET FORTH IN THIS SECTION ARE CUSTOMER’S
EXCLUSIVE REMEDY FORBREACH OF WARRANTY.
6. Limitation of Liability. Dayton’s liability under anyContract and at all timeswith respect to the Products and the Ancillary Services shall in any event be
limitedtodirect damages(which express excludes lost profits, revenues, incentives and back charges)and then only to, at most,the purchase/rentalprice of the relevant
Products paid by Customer. Dayton shall have no other liability to or through Customer whatsoever, whether based on breach of contract, negligence, gross negligence,
strict liability or otherwise. IN NO EVENT SHALL DAYTON BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
(INCLUDING, WITHOUT LIMITATION, LOST PROFITS,REVENUES, LOST INCENTIVES OR BACK CHARGES) ARISING OUT OF OR IN
CONNECTION WITH THE CONTRACT, THE PRODUCTS OR THE ANCILLARY SERVICES.
7. Contingencies. Dayton shall not be responsible for delays in performance caused, directly or indirectly, by any act of God, accident, war, force of arms, fire,
elements, riot, labor dispute, strike, sabotage, civil commotion, act of terrorism, government action, transportation interruption, inability to obtain materials or labor,
Customer’s failure or delay in approving any design or other drawings or any other contingencies beyond Dayton’s reasonable control.
8. Risk of Loss and Insurance. From the date rental Products are shipped until returned to Dayton, Customer shall bear the risk of loss/damage to Products,
whether or not insured. Customer shall, at itsexpense, maintain rental Products in good repair, condition and working order, normal wear and tear excepted. In the
event of any loss/damage to rental Products, Customer shall place the same in good repair, condition and working order, or, if Customer fails to do so, shall, at Dayton’s
election, pay to Daytonthe full, un-depreciated replacement cost of theProducts plus allunpaid rent through the date of payment. Customer shall keep rental Products
insured against all risk of loss/damage by customary property and casualty insurance for the full un-depreciated replacement value (new) and shall carry public liability
insurance, both personal injury and property damage, covering the rental Products and their use. All such insurance shall name Dayton as an additional insured/loss
payee, shall provide Dayton not less than 30 days’ written notice of cancellation and shall be of atypeand form, with terms andin amounts,and with companies
reasonably satisfactory to Dayton.
9. Indemnification by Customer. Customer shall be responsible for, indemnify, defend and hold Dayton harmless from and against all liabilities, claims,
judgments, costs, damages and expenses (including reasonable attorney’s fees and expenses), including for personal injury, death, propertydamageor otherwise,arising
out ofor relating tothe use of the Productsand/orthe Ancillary Services andany other act, or omission by Customer or any subcontractor, agent, sublessee, employee,
or purchaser of or from Customer with respect to the Productsand/or the Ancillary Services, unless resulting from the gross negligence or willful misconduct of
Dayton. If Customer subleases rental Products or resells purchased Products, Customer shall include language in an agreement with its purchaser that makes these
Terms (including the limitations set forth in paragraph5)binding on Customer’s sublessee or purchaser and any subsequent purchasers of the Products, including
binding sublesseeor purchaser to these obligations of indemnification in addition to Customer.
10. Documentation; Product Data. Any specifications, plans, drawings or application recommendations furnished by Dayton to Customer (“Documentation”) are
provided only as a service to Customer to conceptually illustrate the assembly and use of Products. Such Documentation is not intended to be fully directive nor to
cover all engineering details on Products, on products or materials not furnished by Dayton, or on their interconnection. Inasmuch as Dayton does not control jobsite
assembly or procedures, grade or quality of materials, or equipment supplied by others, it is the responsibility of Customer to integrate Documentation into composite
drawings and information suitably complete for construction purposes. In the case of custom designed formwork, design drawings will be furnished by Dayton for
Customer’s approval prior to any fabrication by Dayton. Dayton shall not be responsible for any deviations, changes or alterations to the recommended assembly
details described in forming layout drawings unless such deviations, changes or alterations are illustrated in a revised design drawing provided by Dayton or are
approved in writing by Dayton. Dayton shall at all times retainownership of all Documentation and other technical data (“Product Data”) with respect to the Products
and the Ancillary Services, and unless duly authorized by Dayton, Customer shall not disclose any such Product Data to any other person. Upon Dayton’s request,
Customer promptly shall return to Dayton all copies of Product Data.
11. Default; Termination. If Customer fails to timely pay any invoiceor to perform any other obligation under the Contract, or if Dayton deems itself insecure or
determines that any rental Products are at risk of being damaged, lost or removed from Customer’s control, Customer shall pay immediately upon notice from Dayton
an amount equal to the sum of (i) any unpaid invoicesand (ii) alluninvoiced and unpaid amounts, including rental charges, through the later of the date of paymentor
the return of the Products. In such event, all rights of Customer in the rental Products shall terminate absolutely and, upon any termination(whether by expiration of the
rental period,Customer’s failure to perform any obligation under the Contract or otherwise), Dayton shall have the right, without notice or demand, totake possession
of the rental Products, wherever located, at the expense of Customer. Notwithstanding, Customer shall promptlyreturn the rental Products, at Customer’s expenseand
atDayton’s instruction,and pay for any damage to the Products, ordinary wear and tear excepted.
12. Expenses. Customer shall reimburse Dayton’sexpenses(including, but not limited to, court costs, interest and reasonable attorneys’ fees and expenses) in
collecting any amounts owed by Customer arising out of the Contract, including,but not limited to,expenses incurred by Dayton in protecting its rights under the
Contract and/or recovering and/or repairing any rental Products.
13. Compliance with Governmental Requirements. To apply, any standards or requirements of law or governmental regulations must be expresslyand specifically
set forthin writing in the Contract. Otherwise, Dayton shall have no liability or obligation to Customer with respect to the failure of the Products to comply with any
such standards or requirements.
14. Governing Law and Exclusive Jurisdiction.The Contract shall be governed by, and construed in accordance with, the laws of the State of Ohio without giving
effect to the conflict of law principles, shall be binding upon any and all successors and assigns of the parties hereto and shall not be construed in whole or in part
against any party solely because of the fact that the party drafted it. The exclusive jurisdiction for any dispute arising out of the Contract shall be in a court of
competent jurisdiction located in Montgomery County, Ohio, the parties agree topersonal jurisdiction and that all discovery, including depositions, shall be conducted
therein.
15. Miscellaneous. The Contract may not be amended exceptin writing and signed by an authorized representative of Dayton. Customer may not cancel orders
under this Contract for customized Products without Dayton’swritten consent. Customer shall not assign the Contract or sublease any rental Products without Dayton’s
prior written consent and the full release of Dayton from any obligations with respect to the Products. Any provision of the Contract that is invalid under applicable law
or court order shall not in any way invalidate or affect the remaining provisions of the Contract.
Rev.4/22/2014
-2-
Table of Contents
Categorized Listing
A 1 X FLAT TIE 21
A22 22
LIGHT WALL FORMING 1
SPREADER CLEATS 22
A2 1
A27 23
PLASTIC CONE FOR TIE 1
TURNBUCKLE FORM ALIGNER WITH BENT PLATE 23
A3 STD 2
A27M 23
SNAP TIE STANDARD - 2,250 LBS SWL 2
TURNBUCKLE FORM ALIGNER WITH STRAIGHT
A3 STD - CAN 3
PLATE 23
A3 STD (NON-STOCK) 7
A29 23
SNAP TIE STANDARD (NON-STOCK) - 2,250 LBS
SNAP TIE SHANK WRENCH 23
SWL 7
A31 24
A3 HEAVY 8
WRENCH HEAD SNAP TIE SOCKET 24
SNAP TIE HEAVY - 3,350 LBS SWL 8
A40 24
A3 HEAVY (NON-STOCK) 9
CONE REMOVAL WRENCH 24
SNAP TIE HEAVY (NON-STOCK) - 3,350 LBS 9
A43 24
A3 STAYFORM 10
FOOTING TIES 24
STAYFORM TIES - 1,875 LBS SWL 10
A44 25
A3A46 11
STAINLESS STEEL SNAP TIE 25
SNAP TIE WITH LOOP TIES COMBINATION TIES 11
A45 26
A3B1 12
BASE TIE - 1,500 LBS SWL 26
SNAP TIE WITH 1/2" COIL TIE COMBINATION 12
A46 27
A4H 13
LOOP TIES 27
HEX HEAD SNAP TIES - 2,250 LBS SWL 13
A46 (SPECIAL) 29
A4H STD (NON-STOCK) 15
A46 (NON-STOCK) 31
A4H HEAVY (NON-STOCK) 16
LOOP TIES (NON-STOCK) 31
HEX HEAD SNAP TIES - 3,350 LBS SWL 16
A46B1 35
A5 16
COMBINATION TIES 35
THREADED PULLOUT TIE - 1,875 LBS SWL 16
A46B1 (NON-STOCK) 35
A6 16
A46B1 (SPECIAL) 36
SPANDREL POINT TIE 16
A46 BENT LOOP TIES 38
A7 16
A46 BENT 39
SPANDREL HOOK TIE 16
LOOP TIES - BENT 39
A7A 17
A46 STAYFORM 43
SPANDREL PLATE TIE 17
STAYFORM TIES - 1,800 LBS SWL 43
A9 17
STAYFORM TIES ACCESSORIES 43
TIP-TO-TIP - 2,250 LBS SWL (STANDARD) OR 3,000
A48 44
LBS SWL (HEAVY) 17
GANG LOOP TIES 44
A10 17
A48 (NON-STOCK) 45
PLATE TIE - 2,250 LBS SWL (STANDARD) 17
A51 47
A13 18
WEDGE BOLT 47
METAL STRAPPING 18
A52 47
A16 18
Z TIE HOLDER 47
OMNI WEDGE 18
A53 47
A16SB 18
WALER TIE 47
SNAP BRACKET 18
A54 48
A18 18
SNAPLUGS® CONCRETE PLUGS 48
PANEL BOLT 18
A55 48
A19 19
SURE-LOCK® TIE - 2,250 LBS. 48
CORNER WASHER 19
A55 (NON-STOCK) 50
A21C 19
A56 50
CLAMP (DUCTILE EMP) 19
A21F 19 SURE-LOCK® BRACKET 50
A57 51
FLAT TIE 19
A21K 20 SURE-LOCK® STRONGBACK CLAMP 51
A58 51
TIE KEY 20
A21U 20 SURE PLUG 51
A59 52
STRAP TIE 20
A21X 21 SURE PLUG INSERTION TOOL 52
i
Table of Contents
Categorized Listing
A81 53 B14W 79
JAHN® "A" BRACKET 53 WALE BOLT ASSEMBLY 79
A82 53 B15 79
JAHN® "C" BRACKET 53 PLASTIC CONE REMOVAL WRENCH 79
A83 53 B16 80
JAHN® CORNERLOCK 53 COIL LOOP INSERT 80
A89 54 B16/B3 81
JAHN® SCAFFOLD JACK 54 COIL LOOP INSERT (SCREW-ON) 81
A90 54 B16W 81
SCAFFOLD BRACKET JACK 54 COIL LOOP INSERT WITH WASHER 81
A90W 55 B17 82
SCAFFOLD BRACKET JACK - WEST COAST 55 DOUBLE FLARED COIL LOOP INSERT 82
A93C 55 B18 83
SURE GUARD® BRACKET 55 SINGLE FLARED COIL LOOP INSERT 83
A95 56 B20 84
DAYTON BAR 56 WALE HOLDER 84
A95P 56 B21 84
A100 56 PLY LAG (FOR STEEL-PLY FORMING) 84
SPEED STEP® 56 B25 85
A110 56 HEAVY COIL HEX NUTS 85
METAL RIB 56 B27 85
B 57 COIL NUT WASHER 85
B29 85
COIL PRODUCTS AND HEAVY FORMING 57
PLASTIC CONES FOR COIL TIES 85
B1 57
B30 86
COIL TIES 57
B31 86
B1/B3 59
ROCK ANCHOR (COIL THREAD) 86
B2 63
B32 86
B2/B3 67
HANDLE COIL NUT 86
B6 68
B33 87
WELDING COIL TIE 68
DOUBLE FLARED CRISS CROSS COIL LOOP INSERT 87
B6R 68
B37 87
REBAR HOOK 68
TOGGLE COIL TIES 87
B7 69
B39 88
2 STRUT COIL INSERT (CRIMP) - B7 69
WING NUT (COIL THREAD) 88
B22 69
B40 88
4 STRUT COIL INSERT (CRIMP) - B22 69
PLASTIC SETBACK PLUG 88
B11 69
B42 88
FLAT WASHER 69
BATTER WASHER 88
B12 71
B43 89
COIL ROD 71
TRIPLE FLARED COIL LOOP 89
COIL ROD - CANADA ONLY 71
C 90
COIL ROD-ELECTRO GALVANIZED 71
COIL ROD-STAINLESS STEEL (T304) 72 BRIDGE DECK 90
B12A 72 ENGINEERING SERVICES 90
D/R THREAD BAR 72 FORM HANGERS 90
B12AD 73 C1B, C1C 90
D/R EURO THREAD BAR 73 WEDGE HANGER 90
D/R THREAD BAR ACCESSORIES 74 C2 91
B13 75
COIL HANGER SADDLE TYPE 91
COIL NUTS - RIGHT HAND THREAD 75 C3 92
B13L 75
COIL HALF HANGER 92
COIL NUTS - LEFT HAND THREAD 75 C13 92
COIL NUTS - CANADA ONLY 76
PLATE SADDLE HANGER 92
B14 76
C13A 92
COIL BOLTS 76
ALL WIRE SADDLE HANGER 92
B14A 78
C14 93
ADJUSTABLE COIL BOLT 78
CHANNEL SADDLE HANGER 93
ii
Table of Contents
Categorized Listing
C24 93 EXTRA PLASTIC COVER 115
PRES-STEEL HALF HANGER 93 C68 116
C25 95 TY-DOWN HANGER 116
ADJUSTABLE HALF HANGER 95 C89 117
C26 95 HEAVY DUTY BRIDGE OVERHANG BRACKET - 72" 117
90°, 45° AND 15° HALF HANGER 95 C89L 117
C28 96 HEAVY DUTY BRIDGE OVERHANG BRACKET - 90" 117
HAUNCH CARRIER 96 C90 117
C29 96 HEAVY C-CLAMP 117
FILLET CLIPS 96 BEAM CLIP 117
C41 97 C110C 118
COIL ROD HANGER 97 C110C - FOR CONCRETE BEAMS 118
C44 98 C110S 118
CON-BEAM HANGER 98 C110H 119
C45 99 C110H/C110TH 119
C46 100 B13/B25 119
C46H 100 COIL NUTS - C110 119
OFFSET FREE-FIT HANGER 100 C120CB 120
C46TH 101 C120P 121
TWIST TYPE OFFSET FREE-FIT HANGER 101 C121 122
C47 101 C122 122
C49 102 C123 123
BRIDGE OVERHANG BRACKET 102 C124 123
C49D 102 C127 124
BRIDGE OVERHANG BRACKET - D 102 C128 124
C49C 103 C129 125
HIGH CAPACITY BRIDGE OVERHANG BRACKET 103 COIL NUTS - C120 125
C49CD 103 C134 126
HIGH CAPACITY BRIDGE OVERHANG BRACKET - D 103 C137 126
C49JR 104
C139 127
BRIDGE OVERHANG BRACKET - JR 104
COIL NUTS - C130 127
C49W 104
D 128
BRIDGE OVERHANG BRACKET - W 104
HEAVY FORMING AND THREADED
C51 104
WALL PLATE ASSEMBLY 104 PRODUCTS 128
C52 105 D1 (NON-STOCK) 128
BRIDGE OVERHANG GUARD RAIL RECEPTACLE 105 INSIDE TIE ROD 128
C53 105 D18 132
C52P 105 D18 (NON-STOCK) 132
GUARDRAIL SPEED BRACKET ASSEMBLY 105 D18DR (NON-STOCK) 136
C54 106 D1J 137
BRIDGE OVERHANG EXTENDER 106 D1J HOOK BOLT, ROUND BEND-COIL THREAD 137
C59 106 D1J HOOK BOLT, ROUND BEND-NC THREAD 138
B.O.B. CONVERSION KITS 106 D1L 138
C59D 106 D1L HOOK BOLT, RIGHT ANGLE BEND-COIL
C60 107 THREAD 138
PRES-STEEL HANGER 107 D1LA 139
C61 111 D1LA HOOK BOLT, SPECIAL-PLAIN 139
COMBINATION BRIDGE DECK HANGER 111 D1LA HOOK BOLT, SPECIAL-GALVANIZED 139
C62 112 D1J (NON-STOCK) 139
PRES-STEEL HANGER WITH INTERLOCK 112 D1J HOOK BOLT - COIL AND NC THREAD 139
C63 113 D1L AND D1LA (NON-STOCK) 140
PRES-STEEL HOOKHANGER 113 D1L AND D1LA HOOK BOLT - COIL AND NC
C64 115 THREAD 140
D1J BOLT CLAMP 140
C65 115
D1S 141
ADJUSTABLE JOIST HANGER 115
ANCHOR BOLT SLEEVES 141
C65S 115
D2 141
iii
Table of Contents
Categorized Listing
SHE BOLT (OUTSIDE STUD ROD) - 9,000 LBS SWL 141 SURE-GUARD® REBAR PROTECTOR 152
D4 141 D50 153
HEX COUPLING NUT (NC THREADS) 141 DBR FLANGE COUPLER 153
D6 142 DBR STANDARD COUPLER 153
NUT WASHER (ACME) 142 D51 154
D9 142 DBR® SPLICE BAR 154
TAPER TIE - COIL THREAD 142 D52 154
D9A 143 DBR® SPLICE BAR, 90° BENT 154
TAPER TIE- D/R THREAD 143 D53 155
D9UHS 143 DBR® SPLICE BAR, HOOKED 155
DAYTON TAPER TIE-COIL THREAD 143 D54 155
D12 144 DBR® SPLICE BAR, DOUBLE ENDED 155
ROD CLAMP 144 D81 156
D12A 144 DBR® THREAD PROTECTOR 156
PENCIL ROD 144 D51A 156
D12F 144 DBR® FORM SAVER 156
FORM CLAMP 144 D52A 157
D14 145 DBR® FORM SAVER, 90° BENT 157
TIGHTENING WRENCH 145 D53A 157
D21 145 DBR® FORM SAVER, HOOKED 157
REBAR CLIP AND FORM SPREADER 145 D54A 158
D22 145 DBR® FORM SAVER, DOUBLE ENDED 158
D24 146 DOWEL-IN (D-I) THREAD PROTECTOR 158
ADJUSTABLE WELD ANGLE BRACKET 146 D49 158
D25 146 DBDI MAGNA-JAW 158
FITTING-UP BOLTS 146 D101 159
D26 147 DOWEL-IN (D-I) 159
FITTING-UP NUTS 147 D102 191
D27 147 DOWEL-IN (D-I), 90° BENT 191
LAG BOLTS 147 D103 191
D30 147 DOWEL-IN (D-I), HOOK 191
SHE BOLT- COIL THREAD 147 D104 191
D30A 148 DOWEL-IN (D-I), DOUBLE ENDED 191
SHE BOLT - D/R THREAD 148 D108 192
D30AS 148 DOWEL-IN (D-I), BOLT HEAD 192
SETTING SHE BOLT CONE 148 D101A 193
D30UHS 148 DOWEL-BAR (D-B) 193
ULTRA-HIGH STRENGTH SHE-BOLT 148 D102A 225
D32 149 DOWEL-BAR (D-B), 90° BENT 225
CLOSED COUPLER - COIL THREAD 149 D103A 225
D33 149 DOWEL-BAR (D-B), HOOK 225
NEOPRENE WATER-RESISTANT WASHER 149 D104A 225
D40 149 DOWEL-BAR (D-B), DOUBLE ENDED 225
HE-BOLT 149 D106 226
D42 150 DBDI WELDABLE COUPLER 226
BAG TIES 150 D108A 226
WTW 150 DOWEL-BAR (D-B), BOLT HEAD 226
PREMIUM TIE WIRE 150 D158 227
D55 151 DOWEL-IN (D-I) END ANCHOR DISC 227
METAL STRIP™ 151 D158B 227
D140 151 END ANCHOR, FORGED 227
DAYTON SHEAR RESISTANCE 151 D158C 228
D141 151 DOWEL-BAR (DB) END ANCHOR, FORGED 228
PLASTIC DSR CHAIR 151 D158D 228
PC110 152 DOWEL-BAR (DI) END ANCHOR, FORGED 228
SUPROTEK® IMPALEMENT SAFETY CAPS 152 D158E 228
PC200 152 END ANCHOR, FORGED DOUBLE 228
D48 152 D250SCA 229
iv
Table of Contents
Categorized Listing
BAR LOCK® S/CA-SERIES COUPLERS 229 TAPER-LOCK® WELDABLE COUPLER 250
D295SCA 230 D368 251
BAR LOCK® S/CA-SERIES, SPARE BOLTS 230 TAPER-LOCK® FORM SAVER 251
D260SCA 230 D370 253
BAR LOCK® S/CA-SERIES WELDABLE COUPLERS 230 TAPER-LOCK® MALE THREADED BARS 253
D220SCA 231 D380 254
BAR LOCK® S/CA-SERIES TRANSITIONAL TAPER-LOCK® BREAK AWAY THREAD
COUPLER 231 PROTECTOR 254
D250L 231 TAPER-LOCK® MALE THREAD PROTECTOR 254
BAR LOCK® L-SERIES COUPLERS 231 D382 255
D295L 232 TAPER-LOCK® THREAD PROTECTORS 255
BAR LOCK® L-SERIES SPARE BOLTS 232 D410 256
D251L 233 SLEEVE-LOCK® GROUT SLEEVE 256
BAR LOCK® L-SERIES END ANCHORS 233 D487 257
D260L 233 SLEEVE-LOCK® SEAL PLUG 257
BAR LOCK® L-SERIES WELDABLE COUPLERS 233 D490 257
D220L 234 SLEEVE-LOCK® GROUT 257
BAR LOCK® L-SERIES TRANSITIONAL COUPLER 234 D491 257
D250XL 235 SLEEVE-LOCK® FORM PLUG 257
BAR LOCK® XL-SERIES COUPLERS 235 D492 258
D295XL 236 SLEEVE-LOCK® PVC 258
BAR LOCK® XL-SERIES BOLTS 236 D493 258
D251XL 237 SLEEVE-LOCK® PORT PLUG 258
BAR LOCK® XL-SERIES END ANCHORS 237 D630 258
D260XL 237 COMPRESSION ONLY COUPLER 258
BAR LOCK® XL-SERIES WELDABLE COUPLERS 237 E 259
D220XL 237 RISER FRAMES AND SEAT BRACKETS 259
BAR LOCK® XL-SERIES TRANSITIONAL
E1 259
COUPLERS 237
RISER FRAMES, STANDARD 259
D301 238
E2 259
TAPER-LOCK® 1G THREADING MACHINE 238
RISER FRAMES 259
D302 239
E3 259
TAPER-LOCK® 1GXL THREADING MACHINE 239
RISER FRAMES 259
D303 240
E7 260
TAPER-LOCK® 2G THREADING MACHINE 240
CUT WASHER 260
D395 241
F 261
TAPER-LOCK® CHECK GAUGES 241
ANCHORS AND INSERTS 261
TAPER-LOCK® CUTTING FLUID 241
TAPER-LOCK® HEAD LUBRICATING OIL 241 F1 261
TAPER-LOCK® OIL GUN 241 SCREW ANCHORS 261
TAPER-LOCK® INSPECTION WRENCH 242 F2 261
D310 242 SCREW ANCHOR BOLTS 261
TAPER-LOCK® STANDARD COUPLER 242 F4 261
D320 243 SCREW ANCHOR SETTING BOLT 261
TAPER-LOCK® TRANSITIONAL COUPLER 243 F4T 261
D330 244 SCREW ANCHOR BOLT SETTING TEMPLATE 261
TAPER-LOCK® POSITIONAL COUPLER 244 F5 262
D340 245 THREADED INSERTS 262
TAPER-LOCK® FLANGE COUPLER 245 F7-2 262
D350 247 ASKEW HEAD BOLTS 262
TAPER-LOCK® SEISMIC END ANCHOR 247 F7-3 262
D351 248 NUTS AND CUT WASHERS 262
TAPER-LOCK® STANDARD END ANCHOR 248 F8 263
D352 250 "T" HEAD SHELF ANGLE INSERT 263
TAPER-LOCK® COLUMN CONNECTOR 250 F9 263
D358 250 HORSESHOE SHIMMING WASHER (STEEL) 263
TAPER-LOCK® FEMALE BOLT HEAD 250 F11 263
D360 250 HANGER INSERT 263
v
Table of Contents
Categorized Listing
F16 264 FERRULE INSTEAD OF A COIL 279
REGLET 264 F74 280
F37 264 THREADED PLASTIC PLUG 280
WALL PLUG 264 F105 280
F39 264 TYPE B4 CUSHION-LOCK® REGLET 280
GROUT RETENTION RING 264 G 281
F41 265 FLAT SLAB PRODUCTS 281
GUARD RAIL ANCHORS (PRE-SET ANCHORS) 265
G1 281
F42 266
PIPE HOLDER 281
LOOP FERRULE INSERT 266
G1U 281
F42W 267
SPECIAL U-SHAPED CRADLE HEAD 281
LOOP FERRULE INSERT WITH MOUNTING WASHER 267
G2 282
F43 267
SCREED CHAIR BASE 282
PLAIN FERRULE 267
G2J 282
F44 268
JOIST TYPE ADJUSTABLE SCREED BASE 282
THIN SLAB FERRULE INSERT 268
G2S 283
F45 269
SPECIAL HEIGHT SCREED BASE 283
CAP PLUG 269
G3 283
F47 269
SCREED CHAIR BASE WITH SAND PLATES 283
DOUBLE FLARED LOOP INSERT 269
G4, G4A 284
F48 270
SCREED CHAIR BASE, DRIVE TYPE 284
EYE NUT 270
G5 284
F49 270
SCREED CHAIR BASE, FREE FIT TYPE 284
EYE BOLT 270
G7 285
F49A 270
SCREED CHAIR BASE FOR STEEL DECK 285
SHOULDER EYE BOLT 270
G8 285
F50 271
FORM BRACKET 285
ROCKET / KOHLER FERRULE INSERT 271
G11 285
F52 271
SCREED STAKE 285
THIN SLAB FERRULE INSERT ("L" LEG) 271
G14 286
F53 272
HEAVY DUTY SCREED HOLDERS 286
THIN SLAB COIL INSERT ("L" LEG) 272
G15 286
F54 272
HEAVY DUTY SCREED SUPPORTS 286
DUCTILE EMBED (SAE) 272
G16 286
F54RT 272
HEAVY DUTY SCREED CHAIR BASE 286
RAIL FASTENER EMBED (RT-SAE) 272
G26 287
F56 273
STAKE PULLER 287
EXPANDED COIL INSERT 273
G27 288
F57 273
ROUND STAKES 288
F58 274
G28 289
F59 274 SCREED BRACKET 289
F60 274 G29 289
F61 275 G31 290
F62 275 DIE CAST SCREED PAD 290
FLARED THIN SLAB INSERT (FERRULE) 275 G33 290
F63 276 SCREED KEY 290
FLARED THIN SLAB INSERT (COIL THREAD) 276 G34 291
F64 277 LOAD KEY 291
FERRULE LOOP INSERT 277 G35 291
F65 278 REMOVABLE PLASTIC CAP STRIP 291
TYPE L INSERTS 278 G37 292
TYPE LF INSERTS 278 STAKE FOR SCREED KEY AND LOAD KEY 292
F65W* 279 K15 292
TYPE L INSERTS WITH MOUNTING WASHER* 279 MS STAKE, STANDARD TYPE 292
F72 279 K17 293
THREADED STEEL SETTING PLUGS 279 PS STAKE (#1/0 GA. WIRE) 293
F73 279 K18 294
vi