Table Of Content

5150 KEYBOARDS & KEYPADS 5150 CHERRY ELECTRICAL PRODUCTS 3600 Sunset Ave., Waukegan, IL 60087 708/360-3500 • FAX 708/360-3566 GSO-1600 & GSO-lS00 GSO-1600 GSO-lS00 mM Compatible Keyboard with Built-In Bar Code Compact, 101 Key, mM Compatible Keyboard with Reader. For PC, XT, AT,andPS/2-Systems. Separate Numeric Keypad. For PC, XT, AT and PS/2 Systems. • Input port for bar code stylus, laser scanning gun, or slot reader. • Fits into 19 inch rack (less than 16 inches wide). • Barcodes are automatically identified and differentiated • 101 keysforPC*. XT*, AT*, and PSI2* systems as well (all resolutions). as ffiM* terminals. • 103 keys (2 keys forprograrnroing mode) conforming to • Switch selection ofPC*, XT*, AT *, and PS/2 * modes. ASCU international key layout per DIN 66003/66303. LED's indicate the mode selected. • Superior Cherry MX keyswitches with' 'Gold • Superior Cherry MX keyswitches with "Gold Crosspoint" contacts help eliminate input errors. Crosspoint" contacts help eliminate input errors. GSO-1307 DEC VT- 220 Layout with • Includes housing and cable. IBM* Compatibility • Rugged construction. • "Deep Dish" for home keys FandJ with dimple on key • 105 keys using superior Cherry MX keyswitches with 5 for touch typing. "Gold Crosspoint" contacts to eliminate input errors. • Mane finished, 2-shot molded keycaps are wear resistant • High reliability: and easy to clean. Keycaps colors are: beige/grey (code MCBF = I x 10' operations. U9), white/grey (code L9). MTBF = 80,000 hours. • Materials conform to UL 94. MCBF (each keymodule) > 50 x 10" operations. • Separate cu rsor pad. • Ergonomic, low profile design with "cylindrical style" • Full N -key rollover. key layout for easy operation. • Autorepeat; delay tirneand rate are programmable from • Full-travel (4mm) key switches. the system. GSO-2100 IBM Compatible Keyboard with • High reliability: 23 Programmable Function Keys. MCBF = I x 10' operations MTBF = SO ,000 hours. For PC, XT, AT, and PS/2 Systems. MCBF (each keyswitch) > 50 x 10' operations. • 123 keys - 23 function keys can be programmed with up • Rugged construction. to a total of 2K characters and "locked" with switch • Ergonomic, low profile design with "cylindrical style" located on underside of keyboard. key layout for easy operation. • Programmable function keys can be labeled with • "Deep Dish" for home keys F and J with dimple on key appropriate legends. 5 for touch typing. • Non-volatile memory retains function programming. • Mane finished, 2-shot molded keycaps are wear resistant • Synchronous data format. and easy to clean. Keycap colors are: beige/grey (code • Full travel (4mm) Cherry MX keymodules with "Gold U9). white/grey (code L9). Crosspoint" contacts help eliminate input errors. • Materials conform to UL 94. • System download capability. • Full N-key rollover. GSl-3000 FTSC Full Travel Membrane • Ergonomic. low profile design. Heightofthird key row is 1.18" (3Omm) (flat keyboard position). Angle of Switch Technology with inclination is 6.2 0. Ergonomic Housing. • Includes housing and cable. • Rugged construction. ·101 keys forPC*, XT*, AT*, and PSI2*systemsaswell • Full-travel (4mm) key switches. as ffiM* terminals. • Malle finished, 2-shot molded keycaps are wear resistant • Switch selection ofPC*, XT*, AT* ,and PS/2 * modes and easy to clean. Keycap colors are: beige/grey (cede LED's indicate the mode selected. U9), white/grey (code L9). • Materials conform to UL 94. • High reliability: MCBF = I x 10' operations. • ffiM* overlays fit housing. MTBF = 80,000 hours. *ffiM, PC, XT, AT and PS/2 are trademarks of MCBF (each key module) > 50 x 10" operations. International Business Machines Corporation. MX Keyswitch • "Gold Crosspoint" contacts ensure the MS Keyswitch • "Gold Crosspoint" contacts ensure the highest standards of reliability - even during highest standards of reliability - even during high speed or repeated actuation. high speed or repeated actuation. • Full travel (4mm) operation yet fits into • Extremely low profile with 2.5mm travel. modern low profile keyboard designs. • Choice of linear and tactile feel. • Meets all current ergonomic standards for • Single pole or double pole switching. word processing and dalll entry applications. • Low cost keyboard assembly - keyswitches mount directly to circuit board. • Range of actuation choices. • Low contact resistance with choice uf contact Momentary. Linear feel. materials to suit electrical requirements. Alternate. Tactile feel. • Two standard keycap heights-6mrn and • Keyswitches can be snapped into a frame or 12mrn. Special key caps are also available. mounted directly onto the printed circuit • Angled stems available for "stepped" board. keyboard design. • Optional LED indicator. 8·1802 For manufacturers' sales offices, see yellow pages EEM 1991