Chemical Engineering Research & Design: Transactions of the Institution of Chemical Engineers. Part A 1993: Vol 71 Index

7 Pages·1993·2.2 MB·English

INDEX TO VOLUME 71 (PART A) 1993
AUTHORS AND PAPERS D
Danesh, A., Tohidi, B., Burgess, R.W. and Todd, A.C., Benzene
A
can form gas hydrates
Abbas, A., Sawyer, P.E. and Yue, P.L., Integrated design and
Davidson, J.F. (see Brinkert, J.)
control of a continuous stirred tank reactor
Davidson, J.F. (see Hailu, L.)
Adam, P. (see Lede, J.)
Davies, G.A. (see Feord, D.)
Adewusi, V.A. and Ogunsola, A.O., Optimal formulation of
Davies, T.W. (see Keene, F.W.)
caustic systems for emulsion transportation and dehydration
de Groot, J.L.B. (see Hughes, M.A.)
of heavy oil
Dennison, G. (see Summerfield, I.R.)
Aguirre, P.A. (see Scenna, N.J.)
Deter, M. and Gerrard, A.M., Some new heuristics for separa-
Akay, G. and Wakeman, R.J., Ultrafiltration and microfiltra-
ting multicomponent mixtures in a single continuous distilla-
tion of surfactant dispersions — an evaluation of published
tion column
research
Douglas, P.L., Garg, M.K., Linders, J.G. and Mallick, S.K., A
Aktar, S. (see Stratford, P.)
new algorithm for selection of separation technologies
Al-Shamali, O. and Greaves, M., In situ combustion (ISC)
Draeger, N.M. (see Chang, Y.K.)
processes: enhanced oil recovery using horizontal wells
Dudley, L.Y. (see Stratford, P.)
Alvarez, D. (see Fuertes, A.B.)
Duxbury, J. (see Summerfield, I.R.)
Amundson, N.R. and Aris, R., Reaction of a continuous mixture
Dyakowsk, T. (see McKee, S.L.)
in a bubbling fluidized bed
Dyster, K.N., Koutsakos, E., Jaworski, Z. and Nienow, A.W.,
Andrew, S.P.S., The comprehension of relative magnitude in
An LDA study of the radial discharge velocities generated by
complex systems
a Rushton turbine: Newtonian fluids, Re> =5
Aris, R. (see Amundson, N.R.)
Arrowsmith, A. (see Gillham, A.R.) E
Ashton, N. (see Gillham, A.R.) Elderton, E.J. (see Gillham, A.R.)
Atherton, J.H., Methods for study of reaction mechanisms in Ellis, D.I., Heggs, P.J. and Lawrie, M.G., The removal of Freon
liquid/liquid and liquid/solid reaction systems and their rele- 12 from air using pressure swing adsorption
vance to the development of fine chemical processes Ettouney, H.M., Shaban, H.I. and Nayfeh, L.J., Theoretical
Azzopardi, B.J., T junctions as phase separators for gas liquid analysis of high and low temperature shift converters
flows: possibilities and problems F
B Fagerstolt, K. (see Salmi, T.)
Bahu, R.E. (see Langrish, T.A.G.) Feord, D., Wilcock, E. and Davies, G.A., A stochastic model to
Baldi, G. (see Vanni, M.) describe the operation of knitted mesh mist eliminators,
Banares-Alcantara, R. (see Lababidi, A.M.S.) computation of separation efficiency
Barker, A.J. (see Carr, DJ.) Fernandez, M.L., Higgins, J.S. and Richardson, $.M., When
Beckers, H.L., Industrial R&D and competition rheology interacts with thermodynamics in polymer blends
Bell, T.A. (see McKee, S.L.) Fitzgerald, M.K. (see Luo, J.Y.)
Benson, R.S. and Ponton, J.W., Process miniaturisation Freitas dos Santos, L.M. and Livingston, A.G., Novel bio-
route to total environmental acceptability? reactors for destruction of volatile organic compounds
Bermingham, C. (see McNally, G.M.) Fuertes, A.B., Alvarez, D., Rubiera, F., Pis, J.J. and Marban, G.,
Blackburn, S. and Béhm, H., The influence of powder packing Simultaneous calcination and sintering model for limestone
on paste behaviour particles decomposition
Bohm, H. (see Blackburn, S.) Fuertes, A.B., Marban, G. and Rubiera, F., Kinetics of thermal
Bridgwater, J., Broadbent, C.J. and Parker, D.J., Study of the decomposition of limestone particles in a fluidized bed
influence of blade speed on the performance of a powder reactor
mixer using positron emission particle tracking G
Brinkert, J. and Davidson, J.F., Particle jets in fluidised beds Garg, M, K. (see Douglas, P.L.)
Brinn, M.W., Payne, M.P. and Walsh, P.T., Neural network Gerrard, A.M. (see Deter, M.)
prediction of mutagenicity using structure-property relation- Ghadiri, M., Seville, J.P.K. and Clift, R., Fluidised bed filtration
ships of gases at high temperatures
Broadbent, C.J. (see Bridgwater, J.) Gibbons, D.B. (see Keene, F.W.)
Burgess, R.W. (see Danesh, A.) Gillham, A.R., Elderton, E.J., Arrowsmith, A. and Ashton, N.,
A comparison of CO, stripping performance between plastic
c.
pall rings and Mellapak
Calabrese, R.V. (see Pacek, P.)
Gladden, L.F., Nuclear magnetic resonance studies of porous
Carberry, J.J., Our indebtedness to Bernard of Clairvaux and
media
John Davidson
Gladden, L.F. (see Chiaranussati, P.)
Cardoso, S.S.S. (see Guedes de Carvalho, J.R.F.)
Gomis, V., A dynamic model for the settling rate data for
Carr, D.J. and Barker, A.J., Compressive properties of carbon
dispersions subjected to modulated DC voltages
fibre reinforced plastics
Carter, G.M. (see Wakeman, R.J.) Gosman, A.D. (see Luo, J.Y.)
Greaves, M. (see Al-Shamali, O.)
Chang, Y.K., McCreath, G.E., Draeger, N.M. and Chase, H.A.,
Griffiths, R.W. (see Chiaranussati, P.)
Novel technologies for direct extraction of proteins
Guedes de Carvalho, J.R.F., Cardoso, S.S.S. and Teixeira, J.A.S.,
Chase, H.A. (see Chang, Y.K.)
Axial mixing in slug flow. The use of injected air to reduce
Chen, J.R., Richardson, S.M. and Saville, G., A simplified
Taylor dispersion in a flowing liquid
numerical method for transient two-phase pipe flow
Chiaranussati, P., Gladden L.F., Griffiths, R.W., Jackson, S.D. H
and Webb, G., The influence of processing on deactivation Hailu, L., Plaka, F., Clift, R. and Davidson, J.F., Measurement
and hydrogen spillover phenomena pon silicas and silica- of gas flow through a two-dimensional bubble in a fluidised
supported metal catalysts bed
Clift, R. (see Ghadiri, M.) Hawes, C. (see Stratford, P.)
Clift, R. (see Hailu, L.) Heggs, PJ. (see Ellis, D.1.)
Cooper, A.C.G. (see Himsworth, J.R.) Henshall, J.L. (see Wakeman, R.J.)
Crawshaw, J.P., Paterson, W.R. and Scott, D.M., Gas residence Higgins, J.S. (see Fernendez, M.L.)
time distribution studies of fixed, moving and frozen beds of Himsworth, J.R. and Cooper, A.C.G., Supercharged heat ex-
spheres changer networks
Cumming, I.W. (see Nassehi, V.) Holdich, R.G. (see Nassehi, V.)
Trans IChemE, Vol. 71, Part A, November 1993
688 INDEX TO VOLUME 71 (PART A) 1993
Holdsworth, M.L., Studies in the direct smelting of zinc Moore, I.P.T. (see Walker, K.J.)
Hughes, M.A. and de Groot, J.L.B., A PET recycling process Murphy, W.R. (see McNally, G.M.}
Hunt, H.E.M., The mechanical strength of ceramic honeycomb Myska, J. (see Svec, J.)
monoliths as determined by simple experiments
N
Hutchinson, C.A. (see Langrish, T.A.G.)
Nassehi, V., Holdich, R.G. and Cumming, I.W., Comparison of
I experimental and numerical rheological data of non-New-
Issa, R.I. (see Luo, J.Y.) tonian suspensions
Nayfeh, L.J. (see Ettouney, H.M.)
J
Nedderman, R.M. (see Verghese, T.M.)
Jackson, S.D. (see Chiaranussati, P.) Needs, R.J. (see Mehta, A.)
Jameson, G.J., Bubbles in motion Ng, B.H. (see Tan, T.C.)
Jaworski, Z. (see Dyster, K.N.) Nienow, A.W. (see Dyster, K.N.)
Jeday, M.R., Labidi, J., and Le Goff, P., A heat transformer for
Nienow, A.W. (see Pacek, P.)
upgrading the waste heat of an industrial sulphuric acid
plant O
Jenkins, D.P., Diesel power generation without carbon dioxide Oakley, D.E. (see Langrish, T.A.G.)
emissions Obot, N.T., The frictional law of corresponding staies: its origin
Joshi, J.B. (see Mishra, V.P.) and applications
Ogunsola, A.O. (see Adewusi, V.A.)
K
Omidkhah Nasrin, M. (see Smith, R.) 467,
Katsanevakis, A.N. (see Smith, J.M.)
Ong, C.L. (see Tan, T.C.)
Keene, F.W., Davies, T.W. and Gibbons, D.B., Flow distribu-
tion on the shellside of a shell and tube heat exchanger P
Keey, R.B. (see Langrish, T.A.G.) Paatero, E. (see Salmi, T.)
King, D.W. (see Zuiderweg, F.J.) Pacek, A.W., Moore, I.P.T., Calabrese, R.V. and Nienow, A.W.,
Knights, A.J. (see Williams, R.) Evolution of drop size distributions and average drop dia-
Kolaczkowski, S.T. (see Worth, D.J.) meter in liquid-liquid dispersions before and after phase
Koutsakos, E. (see Dyster, K.N.) inversion
Kunesh, J.F. (see Zuiderweg, F.J.) Padley, P.J. (see Williams, R.)
Pandit, A.B., An impeller with flinging blades
L
Panja, N.C. and Phaneswara Rao, D., Power input measure-
Lababidi, A.M.S. and Banares-Aicantara, R., An integrated
ment from temperature rise data in mechanically agitated
graphical user interface for a chemical engineering design sup-
port system contactors
Parker, D.J. (see Bridgwater, J.)
Labayru, R. (see White, D.A.)
Paterson, W.R. (see Crawshaw, J.P.)
Labidi, J. (see Jeday, M.R.)
Payne, M.P. (see Brinn, M.W.)
Laing, D.M. (see Ponton, J.W.)
Phaneswara Rao, D. (see Panja, N.C.)
Langrish, T.A.G., Oakley, D.E., Keey, R.B., Bahu, R.E. and
Phillips, C., Development and design of the thermal oxide
Hutchinson, C.A., Time-dependent flow patterns in spray
reprocessing plant at Sellafield
dryers
Pis, J.J. (see Fuertes, A.B.)
Law, C.S.R., Webb, C. and Williams, R.A., Kinetic studies on
Plaka, F. (see Hailu, L.)
glucoamylase wuth maltodextrin as substrate
Ponton, J.W. and Laing, D.M., A hierarchical approach to the
Lawrie, M.G. (see Ellis, D.1.)
design of process control systems
Lede, J.. Adam, P., Marcant, S. and Villermaux, J.. A new
Ponton, J.W. (see Benson, R.S.)
method for studying reaction of solid particles sprayed by a
gas jet on to a hot surface R
Le Goff, P. (see Jeday, M.R.) Reed, I.M. (see Stratford, P.)
Lestak, F. and Smith, R., The control of dividing wall Reuben, B. (see Stratford, P.)
column Richardson, S.M. (see Chen, J.R.)
Levenspiel, O., Anomaly hunters Richardson, S.M. (see Fernandez, M.L.)
Linders, J.G. (see Douglas, P.L.) Rubiera, F. (see Fuertes, A.B.) 69,
Linnhoff, P., Pinch analysis — A state-of-the-art review
S
Livingston, A.G. (see Freitos dos Santos, L.M.)
Luo, J.Y., Gosman, A.D., Issa, R.I., Middleton, J.C., Fitzgerald, Salmi, T., Paatero, E. and Fagerstolt, K., Optimal degree of
M.K., Fullflow field computation of mixing in baffled stirred backmixing in autocatalytic reactions. A case study: Chlorina-
vessels tion of dodecanoic acid
Saville, G. (see Chen, J.R.)
M Sawyer, P.E. (see Abbas, A.)
McCreath, G.E. (see Chang, Y.K.) Scenna, N.J. and Aguirre, P.A., A thermodynamic methodology
McKee, S.L., Williams, R.A.. Dyakowsk, T. and Bell, T.A., for process synthesis and its application to dual-purpose
Industrial application of electrical tomography to conveying desalination plants: extraction vs back pressure turbines
processes Schliinder, E.-U., Microwave drying of ceramic spheres and
Mackley, M.R., Smith, K.B. and Wise, N.P., The mixing and cylinders
separation of particle suspensions using oscillatory flow in Scott, D.M. (see Crawshaw, J.P.)
baffled tubes Seville, J.P.K. (see Ghadiri, M.)
McNally, G.M., Bermingham, C. and Murphy, W.R., Optimiza- Shaban, H.I. (see Ettouney, H.M.)
tion of performance characteristics of LDPE/LLDPE blends Sharma, M.M., Some novel aspects of multiphase reactions and
in blown film extrusion reactors
Mallick, S.K. (see Douglas, P.L.) Smith, J.M. and Katsanevakis, A.N., Impeller power demand in
Mann, R., Developments in chemical reaction engineering: mechanically agitated boiling systems
Issues relating to particle pore structures and porous mater- Smith, K.B. (see Mackley, M.R.)
ials Smith, R. and Omidkhah Nasrin, Smith, M., Trade-offs and
Marban, G. (see Fuertes, A.B.) interactions in reaction and separation systems. Part 1: Re-
Marcant, S. (see Lede, J.) actors with no selectivity losses 467
Mehta, A. and Needs, R.J., Friction in vibrated powders Smith, M., Trade-offs and interactions in reaction and separa-
mechanism for memory tion systems. Part 2: Reactors with selectivity losses 474
Middleton, J.C. (see Luo, J.Y.) Smith, R. (see Lestak, F.) 307
Mishra, V.P. and Joshi, J.B., Flow generated by a disk turbine: Spence, A. (see Worth, D.J.) 331
Part III: Effect of impeller diameter, impeller location and Stratford, P., Dudley, L.Y., Aktar, S., Hawes, C., Reuben, B. and
comparison with other radial flow turbines Reed, I.M., Coatings for the prevention of fouling of micro-
Moore, I.P.T. (see Pacek, P.) filtration membranes 327
Trans IChemE, Vol. 71, Part A, November 1993
INDEX TO VOLUME 71 (PART A) 1993
Stubbing, T_J., Airless drying: Its invention, method and applica- anomalies
tions Anomaly hunters,
Summerfield, I.R., Duxbury, J. and Dennison, G., Membrane applied catalysis
development for the separation of H2 and CO2: screening artificial intelligence
tests Aspects of submerged combustion as a heat exchange method,
Svec, J. and MySka, J., A note to the Richardson-Zaki fluidizing Williams, R., Padley, P.J. and Knights, A.J.
and settling velocity equations autocatalysis
Sweeney, J. and Ward, I.M., Measurement and modelling of the axial dispersion model
multiaxial drawing of PVC
B
1
baffled tubes
Tan, T.C. and Ng, B.H., Effect of mixed dissolved solutes on the ball milling
vapour liquid equilibrium of the ethanol-water system: pre- batch drying
diction and experimental verification benzene
Tan, T.C. and Ong, C.L., Wilson and NRTL correlations of the Benzene can form gas hydrates, Danesh, A., Tohidi, B., Burgess,
vapour liquid equilibria or binary solvent mixture for all R.W. and Todd, A.C.
pressure and temperature conditions Beverloo
Tarleton, E.S. and Wakeman, R.J., Understanding flux decline biaxial
in crossflow microfiltration. Part 1: effects of particles and boiling systems
pore size bubble columns
Teixeira, J.A.S. (see Guedes de Carvalho, J.R.F.) bubbles
Todd, A.C. (see Danesh, A.) Bubbles in motion, Jameson, G.J.
Tohidi, B. (see Danesh, A.) bubbling regime
Vv
Cc
Vanni, M. and Baldi, G., Equilibrium and kinetic analysis of calcination
the extraction of propanoic acid from water to isobu- catalysis
tanol catalyst activity-yield
Veasey, T.J. (see Walker, K:J.) catalyst formation
Verghese, T.M. and Nedderman, R.M.., A theoretical prediction ceramic
of the discharge rate from conical hoppers in both the mass channelling
flow and core flow regimes characterisation
Villermaux, J., Basic chemical engineering research. Where are chemical engineering design
we going? chemical reaction engineering
Villermaux, J. (see Lede, J.) chlorination of carboxylic acids
coalescence
W Coatings for the prevention of fouling of microfiltration mem-
Wakeman, R.J., Henshall, J.L. and Carter, G.M., Solution
branes, Stratford, P., Dudley, L.Y., Aktar, S., Hawes, C.,
environment effects on the hardness and toughness of calcite Reuben, B. and Reed, I.M.
during grinding
CO conversion
Wakeman, R.J. (see Akay, G.)
compactivity
Wakeman, R.J. (see Tarleton, E.S.)
Comparison of CO, stripping performance between plastic pall
Walker, K.J., Veasey, T.J. and Moore, I.P.T., A parametric
rings and Mellapak, A, Gillham, A.R., Elderton, E., Arrow-
evaluation of the hydrocyclone separation of drilling mud
smith, A. and Ashton, N.
from drilled rock chippings
Comparison of experimental and numerical rheological data of
Walsh, P.T. (see Brinn, M.W.) non-Newtonian suspensions, Nassehi, V., Holdich, R.G. and
Ward, I.M. (see Sweeney, J.)
Cumming, I.W.
Webb, C. (see Law, C.S.R.) competition
Webb, G. (see Chiaranussati, P.) Comprehension of relative magnitude in complex systems,
White, D.A. and Labayru, R., Modelling and optimisation of
The,
reverse dialysis plant Compressive properties of carbon fibre reinforced plastics, Carr,
Whitelaw, J.H. (see Yianneskis, M.)
D.J. and Barker, A.J.
Wilcock, E. (see Feord, D.)
computer aided process design
Williams, R., Padley, P.J. and Knights, A.J., Aspects of sub-
continuous drying
merged combustion as a heat exchange method
continuous mixtures
Williams, R.A. (see Law, C.S.R.) Control of dividing wall column, The, Lestak, F. and Smith, R.
Williams, R.A. (see McKee, S.L.)
core flow
Wise, N.P. (see Mackley, M.R.) correlation
Worth, D.J., Kolaczkowski, S.T. and Spence, A., Modelling
cost
channel interaction in a catalytic monolith reactor
crop growth
Y D
Yianneskis, M. and Whitelaw, J.H., On the structure of the Damkohler number
trailing vortices around Rushton turbine blades
Davidson bubble
Yue, P.L. (see Abbas, A.)
Davidson number
Z deactivation
Zuiderweg, F.J., Kunesh, J.G. and King, D.W., A model for the dehydroxylation
calculation of the effect of maldistribution on the efficiency of desalination and power
a packed column design and control
design method
design support system
TITLES AND KEYWORDS
Development and design of the thermal oxide reprocessing plant
A at Sellafield, Phillips, C.
absorption Developments in chemical reaction engineering: Issues relating
activated carbon beds to particle pore structures and porous materials, Mann, R.
adsorption dielectric properties of pourous media
advanced control Diesel power generation without carbon dioxide emissions,
agitated contactor Jenkins, D.P.
Airless drying: Its invention, method and applications, Stub- diffusion
bing, T.J. diffusion with reaction
alumina dimensions
Trans IChemE, Vol. 71, Part A, November 1993
690 INDEX TO VOLUME 71 (PART A) 1993
dinosaurs 629 H
discharge rates 637 hardness
disc turbine 563 heat
dispersion 85 heat and power
distillation , 203 heat transfer
drag 444 heat transformer
drying 622 Heat transformer for upgrading the waste heat of an industrial
drying rates 622 sulphuric acid plant, A, Jeday, M.R., Labidi, J. and Le Goff, P.
dust 371 heuristics
Dynamic model for the settling rate data for dispersions sub- Hierarchical approach to the design of process control systems,
jected to modulated dc voltages, A, Gomis, V. 85 A, Ponton, J.W. and Laing, D.M.
hierarchical design
E high temperatures
electrostatic 85 high temperature shift converter
energy-conservation honeycomb
energy-savings hoppers
environment hot gases
equation of state hot-wire anemometers
Equilibrium and kinetic analysis of the extraction of propanoic hydraulic efficiency
acid from water to isobutanol, Vanni, M. and Baldi, G. hydrodynamic model
equipment hyperelastic
Evolution of drop size distributions and average drop diameter
I
in liquid-liquid dispersions before and after phase inversion,
Pacek, P., Moore, I.P.T., Calabrese, R.V. and Nienow, A.W. impeller
exergy Impeller with flinging blades, An, Pandit, A.B.
expert systems Impeller power demand in mechanically agitated boiling sys-
tems, Smith, J.M. and Katsanevakis, A.N.
extraction
extrusion impinging jet
Industrial application of electrical tomography to conveying
b processes, McKee, S.L., Williams, R.A.. Dyakowsk, T. and
falling velocity Bell, T.A.
film Industrial R&D and competition, Beckers, H.L.
filtration industrial research
fine chemicals Influence of powder packing on paste behaviour, The, Black-
finite element burn, S. and Bohm, H.
fixed bed Influence of processing on deactivation and hydrogen spillover
flinging blades phenomena on silicas and silica-supported metal catalysts,
flotation The, Chiaranussati, P., Gladden, L.F., Griffiths, R.W., Jack-
Flow distribution on the shellside of a shell and tube heat son, §.D. and Webb, G.
exchanger, Keene, F.W., Davies, T.W. and Gibbons, D.B In situ combustion (ISC) processes: enhanced oil recovery using
Flow generated by a disk turbine : Part III: Effect of impeller horizontal wells, Al-Shamali, O. and Greaves, M.
diameter, impeller location and comparison with other radial integrated design
flow turbines, Mishra, V.P. and Joshi, J.B. Integrated design and control of a continuous stirred tank
flow number reactor, Abbas, A., Sawyer, P.E. and Yue, P.L.
flow patterns 355, Integrated graphical used interface for a chemical engineering
fluidised bed filter design support system, An, Lababidi, A.M.S. and Banares-
Fluidised bed filtration of gases at high temperatures, Ghadiri, Alcantara, R.
M., Seville, J.P.K. and Clift, R. intensification
fluidization 212, 618, interfacial turbulence
fluidized bed reactor J
fluidized beds 382, 611, Jameson cell
fouling K
fouling of membranes Kihara parameters
freon 12, kinetics in human cell
friction Kinetics of thermal decomposition of limestone particles in a flu-
frictional law idized bed reactor, Fuertes, A.B., Marban, G. and Rubiera, F.
Frictional law of corresponding states: its origin and applica- Kinetic studies on glucoamylase with maltodextrin as substrate,
tions, The, Obot, N.T. Law, C.S.R., Webb, C. and Williams, R.A.
Friction in vibrated powders a mechanism for memory, K-L model
Mehta, A. and Needs, R.J.
L
frozen bed
laser anemometry
Full flow field computation of mixing in baffled stirred vessels,
laser-Doppler velocimetry
Luo, J.Y., Gosman, A.D., Issa, R.I., Middleton, J.C. and
layer deposition
Fitzgerald, M.K
LDA 11
G LDA measurements 563
gas hydrates LDA study of the radial discharge velocities generated by a
gas-liquid Rushton turbine: Newtonian fluids, Re = 5, An, Dyster, K.N.,
gas-liquid contactor Koutsakos, E., Jaworski, Z. and Nienow, A.W. 11
gas-liquid reactions light scattering 239
gas/liquid separators limestone 421
Gas residence time distribution studies of fixed, moving and limestone decomposition 69
frozen beds of spheres, limit particle size 361
gel formation liquid-liquid reactions 595
glue removal liquid/liquid systems 119
granular bed filter low-frequency oscillations 355
granular materials low temperature shift converter 189
granular structure M
graphical user interface maldistribution 643
grinding managing research 523
Trans IChemE, Vol. 71, Part A, November 1993
INDEX TO VOLUME 71 (PART A) 1993
mass flow 637 blends in blown film extrusion, McNally, G.M., Bermingham,
mass transfer 119 C. and Murphy, W.R.
mathematical models of; fluidized bed 611 optimise performance
Measurement of gas flow through a two-dimensional bubble in oriented polymer
a fluidised bed, Hailu, L., Plaka, F., Clift, R. and Davidson, oscillatory flow
LF. Our indebtedness to Bernard of Clairvaux and John Davidson,
Measurement and modelling of the multiaxial drawing of PVC, Carberry, J.J.
Sweeney, J. and Ward, I.M.
mechanically agitated contactors
Mechanical strength of ceramic honeycomb monoliths as de- Pp
termined by simple experiments, The, Hunt, H.E.M packing
mechanics Parametric evaluation of the hydrocyclone separation of drilling
Membrane development for the separation of H2 and CO2: mud from drilled rock chippings, A, Walker, K.J., Veasey, T.J.
screening tests, Summerfield, I.R., Duxbury, J. and Dennison, and Moore. I.P.T.
G. particle fracture
membranes Particle jets in fluidised beds, Brinkert, J. and Davidson, J.F.
memory effects particles
Methods for study of reaction mechansms in liquid/liquid and particle suspensions
liquid/solid reaction systems and their relevance to the devel- partition
opment of fine chemical processes, Atherton, J.H. paste
microfiltration 399, PET recycling process, A, Hughes, M.A. and de Groot, J.L.B.
microphases phase maldistribution
microwave drying phase separators
Microwave drying of ceramic spheres and cylinders, Schliinder, Pinch analysis A state-of-the-art review, Linnhoff, B.
E.-U. pinch technology
minerals plutonium
miscibility polmer blands
mist eliminators polyethylene
mixing 3, 24, polyethylene terephthalate
Mixing and separation of particle suspensions using oscillatory polyvinylchloride
flow in baffled tubes, Mackley, M.R., Smith, K.B. and Wise, pore size distribution
N.P. pore structure
model porous-media
modelling positron
Modelling channel interaction in a catalytic monolith reactor, powders 245, 250,
Worth, D.J., Kolaczkowski, S.T. and Spence, A. power
Modelling and optimisation of reverse dialysis plant, White, power demand
D.A. and Labayru, R. power input
modulus Power input measurement from temperature rise data in
moisture distribution mechanically agitated contactors, Panja, N.C. and Phanes-
moving bed wara Rao, D.
multiobjective optimisation power optimisation
multiphase flow power recovery network
multistage dialysis plant prediction of outlet condition
pressure swing adsorption
N process control
Neural network prediction of mutagenicity using structure- process design
property relationships, Brinn, M.W., Payne, M.P. and Walsh, process development
P.T. process integration 77,
New algorithm for selection of separation technologies, Doug- process layout
las, P.L., Garg, M.K., Linders, J.G. and Mallick, S.K. Process miniaturisation a route to total environmental
New method for studying reaction of solid particles sprayed by acceptability? Benson, R.J. and Ponton, J.W.
a gas jet on to a hot surface, A, Lede, J., Adam, P., Marcant, process optimisation
S. and Villermaux, J. process synthesis 479,
Newtonian fluids properties
NMR pulsed column
non-Newtonian pumping effectiveness
Note to the Richardson-Zaki fluidizing and settling velocity
equations, A, Svec, J. and MySka, J.
Novel bioreactors for destruction of volatile organic com- R
pounds, Freitas dos Santos, L.M. and Livingston, A.G. R&D
Novel technologies for direct extraction of proteins, Chang, radial flow turbines
Y.K., McCreath, G.E., Draeger, N.M. and Chase, H.A. Reaction of a continuous mixture in a bubbling fluidized bed,
NRTL Amundson, N.R. and Aris, R.
nuclear fuel reaction-diffusion-decay
Nuclear magnetic resonance studies of porous media, Gladden, reaction mechanism
LF. reaction systems
nucleate boiling reactor design
numerical simulation recycle reactor
recycling
O relaxation phenomena
Ogden model Removal of Freon
oil and gas transmission from air using pressure swing adsorption, The, Ellis, D.1., Heggs,
On the structure of the trailing vortices around Rushton turbine P.J. and Lawrie, M.G.
blades, Yianneskis, M. and Whitelaw, J.H. reprocessing
Optimal degree of backmixing in autocatalytic reactions. A case residence time distribution
study: Chlorination of Dodecanoic acid, Salmi, T., Paatero, rheology
E. and Fagerstolt, K. 531 Richardson-Zaki equation
optimisation 467, 474 Rushton impeller
Optimisation of performance characteristics of LDPE/LLDPE Rushton turbine
Trans IChemE, Vol. 71, Part A, November 1993
692 INDEX TO VOLUME 71 (PART A) 1993
S two-phase
savings — energy two-phase flow
selectivity
U
separation
ultrafiltration
separation efficiencies
Ultrafiltration and microfiltration of surfactant dispersions
separation systems
an evaluation of published research, Akay, G. and Wakeman,
separation technology
RJ.
separator sequencing
Understanding flux decline in crossflow microfiltration. Part 1:
shear
effects of particles and pore size, Tarleton, E.S. and Wakeman,
shrinkage
R.J.
silica
uniform kinetics
simple junctions
Simplified numerical method for transient two-phase pipe flow, university research
unsteady flows
A, Chen, J.R., Richardson, S.M. and Saville, G.
uranium
Simultaneous calcination and sintering model for limestone
particles decomposition, Fuertes, A.B., Alvarez, D., Rubeira, Vv
F., Pis, J.J. and Marban, G. vapour liquid equilibrium
sintering vibration
slurry flow viscous effects
sodium bicarbonate Ww
solidification
Solution environment efects on the hardness and toughness of wastewaters
calcite during grinding, Wakeman, R.J., Henshall, J.L. and When rheology interacts with thermodynamics in polymer
Carter, G.M. blends, Fernandez, M.L., Higgins, J.S. and Richardson, S.M.
solvent extraction Wilson
solvents Wilson and NRTL cotrrelations of the vapour liquid equilibria
Some new heuristics for separating multicomponent mixtures of binary solvent mixture for all pressure and temperature
in a single continuous distillation column, Deter, M. and conditions, Tan, T.C. and Ong, C.L.
Gerrard, A.M. Z
Some novel aspects of multiphase reactions and reactors zeolites
spillover
spray dryers BOOKS REVIEWED
stirred reactors Advanced ceramics processing and technology, Volume 1.
Stochastic model to describe the operation of knitted mesh mist J.G.P. Binner (ed) (Noyes). Reviewed by S. Blackburn
eliminators, computation of separation efficiency, A, Feord, Bubbles, drops and particles in non-Newtonian fluids. R.P.
D., Wilcock, E. and Davies, G.A. Chhabra (CRC Press). Reviewed by S.M. Richardson
strength 223, Chemical synthesis of advanced ceramic materials. D. Segal.
Studies in the direct smelting of zinc, Holdsworth, M.L. (Cambridge University Press). Reviewed by S. Blackburn
Study of the influence of blade speed on the performance of a Colloidal dispersions. W.B. Russel, D.A. Saville and W.R.
powder mixer using positron emission particle tracking Showalter (Cambridge University Press). Reviewed by L.V.
sulphuric acid plant Woodcock
Supercharged heat exchanger networks, Himsworth, J.R. and Crystal growth from melts: applications to growth of groups |
Cooper, A.C.G. and 2 crystals. B.N. Roy (Wiley and Sons). Reviewed by J.
supercharger Garside
superheated steam Dictionary of chemical engineering English/French/German
surfactants Spanish. A.L. Lyderson and I. Dahle (Wiley and Sons).
suspensions Reviewed by J.F. Richardson
synthesis Extraction of natural products using near critical solvents.
T M.B. King and T.R. Bott (eds) (Blackie Academic and
temperature Professional). Reviewed by D.L. Pyle
textural development Glossary of corrosion-related terms used in science and
Theoretical analysis of high and low temperature shift con- industry, A.M.A. Vukasovich (ed) (Mark S. Vukasovitch).
verters, Ettouney, H.M., Shaban, H.I. and Nayfeh, L.J. Reviewed by J. Scully
Theoretical prediction of the discharge rate from conical hop- Heat exchange engineering. Volume 2 Compact Heat Exchan-
pers in both the mass flow and core flow regimes, gers: Techniques of size reduction. E.A. Foumeny and PJ.
thermally activated Heggs (eds) (Ellis-Horwood). Reviewed by V.V. Wadekar
Thermodynamic methodology for process synthesis and its Modelling phase equilibria. Thermodynamic and _ practical
application to dual-purpose desalination plants: extraction vs tools. S. Malanowski and A. Anderko (Wiley and Sons).
back pressure turbines, A, Scenna, N.J. and Aguirre, P.A. Reviewed by A. Fredenslund
thermopile Principles of electrochemistry 2nd edition. J. Koryta, J. Dvorak
three phase reactions and L. Kavan (J. Wiley and Sons). Reviewed by K. Scoit
Time-dependent flow patterns in spray dryers, Langrish, T.A.G., Principles of flow in disperse systems. O. Molerus (Chapman
Oakley, D.E., Keey, R.B., Bahu, R.E. and Hutchinson, C.A. and Hall). Reviewed by R.J. Wakeman
T junctions as phase separators for gas liquid flows: possibilities Transport processes in bubbles, drops and particles. R.P.
and problems, Azzopardi, B.J. Chhabra and D. De Kee (Hemisphere Publishing Corpora-
toughness tion). Reviewed by M.J. Slater
Trade-offs and interactions in reaction and separation systems.
Part 1: Reactors with no selectivity losses, Smith, R. and CORRESPONDENCE
Omidkhah Nasrin, M. From Dr P.J. Foster: Reply by Professor Ir.L.A. De Ridder
Trade-offs and interactions in reaction and separation systems. From Dr N. Epstein: Reply by Drs J.P. Crawshaw, W.R.
Part 2: Reactors and selectivity losses, Smith, R. and Omid- Paterson and D.M. Scott
khah Nasrin, M.
trailing vortices REGULAR FEATURES
training Contents of the Canadian Journal of Chemical Engineering 100, 219,
transport 352, 463,
turbine impellers 575, 684
turbulence Doctorates in Chemical Engineering 1991-92 101
turbulent flow List of referees 685
Trans IChemE, Vol. 71, Part A, November 1993
Sa
ar