Table Of Content

Chemical Engineering Journal Chemical Engineering Journal 73 (1999) 265 Author Index of Volume 73 Abu Al-Rub, F. 37, 71 Cilliers, J.J. 52 Jiang, W.B. 137 Riazi, M.R. 161 Al-Enezi, G.A. 161 Cogo, E. Jumah, R. 37, 71 Rivas, FJ. 143 Al-Roumi, Y. 173 Coste, C. Rodriguez Ruvalcaba, J.R. 61 Al-Shannag, M. 71 Kazi, Md.S.N. 247 Albet, J. 23 Dai, Y.Y. 137 Kolaczkowski, S.T. Scott, K. 101, 217, 229 Alper, E. 67 Duffy, G.G. 247 Shannag, M. 37 Argyropoulos, P. 217, 229 Laufenberg, G. 113 Simeonov, E. 255 Azapagic, A. 1 El-Dessouky, H.T. 173 Lee, S.C. 43 Stephenson, T. 131 Ettouney, H.M. 173 Lee, W.K. 43 Banat, F.A. 37, 71 Lee, Y.-L. 77 Taama, W. 101 Bavbek, O. 67 Field, R.W. 113 Lipnizki, F. 113 Taama, W.M. 217, 229 Beltran, FJ. 143 Fourel, L. 93 Lu, ¥.€. 137 Tan, R.B.H. 29 Bernis, A. 93 Frachon, M. 53 Luo, G.S. 137 Ten, P.-K. 113 Boldo, P. 93 Fredrik Ahlstrém-Silversand, Tsibranska, I. 255 Bouhamra, W. 67 A. 205 Malmary, G. 23 Brindle, K. 131 McLurgh, D.B. 143 Ulf Ingemar Odenbrand, C. 205 Gonthier, Y. 93 Minchev, A. 255 Caussat, B. 61 Gonze, E. 93 Molinier, J. 23 Wijn, E.F. 191 Chang, J.H. 43 Wolborska, A. 85 Chen, L.-H. 77 Hémati et J.P. Couderc, M. 61 Pankhania, M. 131 Chen, X.D. 247 Hari, M. 29 Plucinski, P. 143 Zhu, S.L. 137 Cheng, H. 101 Hausmanns, S. 113 1385-8947/99/$ — see front matter © 1999 Elsevier Science S.A. All rights reserved. PIT: $1385-8947(99)00079-0 Chemical Engineering Journal ELSEVIE Chemical Engineering Journal 73 (1999) 267-270 Subject Index of Volume 73 2-Amino-2-methy]-1,3-propandiol Circulatory flows Reaction mechanism and kinetics of aqueous solutions of 2-amino-2- Mixing in circulating flows, 29 methyl-1,3-propandiol and carbon dioxide, 67 Completely mixed reactor Absorption Membrane aeration bioreactors for wastewater treatment: completely Weir flow and liquid height on sieve and valve trays mixed and plug-flow operation, 131 Activated carbon Crude oil External film control of the fixed bed adsorption, 85 Modelling of the rate of oil spill disappearance from seawater for Airlift system Kuwaiti crude and its products, 161 Mixing in circulating flows, 29 CVD Azeotropes Extension du procédé de dépdot de silicium par CVD en lit fluidisé a des On the effect of inert gases in breaking the formic acid—water azeotrope conditions opératoires peu conventionnelles: dépdts sur poudres by gas-gap membrane distillation, 37 poreuses et/ou sous pression réduite, 61 Azeotropic separation Application of Stefan—Maxwell approach to azeotropic separation by Diffusing species membrane distillation, 71 Application of Stefan—Maxwell approach to azeotropic separation by membrane distillation, 71 BATNEEC Diffusion Life cycle assessment and its application to process selection, design On the effect of inert gases in breaking the formic acid—water azeotrope and optimisation, | by gas-gap membrane distillation, 37 Biodegradability Dilute solution Wastewater pretreatment with ultrasonic irradiation to reduce toxicity, 93 Two-phase electrophoresis separation of dyestuffs from dilute solution, Biofilm 137 Membrane aeration bioreactors for wastewater treatment: completely Direct methanol fuel cell mixed and plug-flow operation, 131 Pressure drop modelling for liquid feed direct methanol fuel cells . Part Bioreactor 1. Model development, 217 Membrane aeration bioreactors for wastewater treatment: completely Pressure drop modelling for liquid feed direct methanol fuel cells Part II. mixed and plug-flow operation, 131 Model based parametric analysis, 229 BPEO Dissolution Life cycle assessment and its application to process selection, design Modelling of the rate of oil spill disappearance from seawater for and optimisation, | Kuwaiti crude and its products, 161 Break-through curve Distillation External film controi of the fixed bed adsorption, 85 Weir flow and liquid height on sieve and valve trays, 191 Brine recycle Drag reduction Multi-stage flash desalination: present and future outlook, 173 Heat transfer in the drag reducing regime of wood pulp fibre suspen- Bubbleless membrane oxygenation sions, 247 Membrane aeration bioreactors for wastewater treatment: completely Dyestuffs mixed and plug-flow operation, 131 Two-phase electrophoresis separation of dyestuffs from dilute solution, Bypass 137 A general model for hydrocyclone partition curves, 53 Dynamic surface effects The effects of a surfactant on the mass transfer in spray-tower extraction Calming zone column, 77 Weir flow and liquid height on sieve and valve trays, 191 Carbon dioxide Electrocatalytic Reaction mechanism and kinetics of aqueous solutions of 2-amino-2- Towards an electrochemical process for recovering sulphur dioxide, 101 methyl-1,3-propandiol and carbon dioxide, 67 Electrochemical Catalysts Towards an electrochemical process for recovering sulphur dioxide, Wet air oxidation: a review of process technologies and aspects in 101 reactor design, 143 Electrophoresis Catalytic combustion Two-phase electrophoresis separation of dyestuffs from dilute solution, Modelling catalytic combustion of carbon monoxide and hydrocarbons 137 over catalytically active wire meshes, 205 Emulsification energy Cellulose protector Effects of preparation variables of enzyme-encapsulating water-in-oil Effect of reaction medium on ozone mass transfer and applications to emulsion on enzymatic reaction conversion and emulsion stability in pulp bleaching, 23 an enzyme-—emulsion—liquid—membrane reactor, 43 1385-8947/99/$ — see front matter © 1999 Elsevier Science S.A. All rights reserved. PIT: $1385-8947(99)00080-7 268 Subject Index of Volume 73/Chemical Engineering Journal 73 (1999) 267-270 Emulsifying agent concentration Life cycle assessment Effects of preparation variables of enzyme-encapsulating water-in-oil Life cycle assessment and its application to process selection, design emulsion on enzymatic reaction conversion and emulsion stability in and optimisation, | an enzyme—emulsion—liquid—membrane reactor, 43 Liquid height Emulsion drop size Weir flow and liquid height on sieve and valve trays, 191 Effects of preparation variables of enzyme-encapsulating water-in-oil emulsion on enzymatic reaction conversion and emulsion stability in Mass transfer coefficient an enzyme-—emulsion-liquid—membrane reactor, 43 The effects of a surfactant on the mass transfer in spray-tower extraction Enzyme-emulsion—liquid—membrane column, 77 Effects of preparation variables of enzyme-encapsulating water-in-oil Mass transfer in adsorption emulsion on enzymatic reaction conversion and emulsion stability in External film control of the fixed bed adsorption, 85 an enzyme-emulsion-liquid—membrane reactor, 43 Mass transfer Evaporation Wet air oxidation: a review of process technologies and aspects in Modelling of the rate of oil spill disappearance from seawater for reactor design, 143 Kuwaiti crude and its products, 161 Mathematical model External loop Modelling of the rate of oil spill disappearance from seawater for Mixing in circulating flows, 29 Kuwaiti crude and its products, 161 Extraction kinetics Membrane distillation Solid—liquid extraction from plants — experimental kinetics and mod- Application of Stefan—Maxwell approach to azeotropic separation by elling, 253 membrane distillation, 71 Extraction On the effect of inert gases in breaking the formic acid—water azeotrope The effects of a surfactant on the mass transfer in spray-tower extraction by gas-gap membrane distillation, 37 column, 77 Mixing Mixing in circulating flows, 29 Fibre suspensions Model Heat transfer in the drag reducing regime of wood pulp fibre suspen- Towards an electrochemical process for recovering sulphur dioxide, 101 sions, 247 Modeling and simulation Fibres Multi-stage flash desalination: present and future outlook, 173 Heat transfer in the drag reducing regime of wood pulp fibre suspen- Modelling sions, 247 Modelling catalytic combustion of carbon monoxide and hydrocarbons Fixed bed adsorption over catalytically active wire meshes, 205 External film control of the fixed bed adsorption, 85 Pressure drop modelling for liquid feed direct methanol fuel cells Part II. Flocculation Model based parametric analysis, 229 Heat transfer in the drag reducing regime of wood pulp fibre suspen- Solid—liquid extraction from plants — experimental kinetics and mod- sions, 247 elling, 255 Fluidization Module design Extension du procédé de dépdt de silicium par CVD en lit fluidisé 4 des Organophilic pervaporation: prospects and performance, 113 conditions opératoires peu conventionnelles: dépdts sur poudres Monolith poreuses et/ou sous pression réduite, 61 Modelling catalytic combustion of carbon monoxide and hydrocarbons Formic acid over catalytically active wire meshes, 205 On the effect of inert gases in breaking the formic acid—water azeotrope Multi-objective optimisation by gas-gap membrane distillation, 37 Life cycle assessment and its application to process selection, design and optimisation, | Heat transfer coefficient Multi-stage flashing Heat transfer in the drag reducing regime of wood pulp fibre suspen- Multi-stage flash desalination: present and future outlook, 173 sions, 247 Heat transfer Oil spill Heat transfer in the drag reducing regime of wood pulp fibre suspen- Modelling of the rate of oil spill disappearance from seawater for sions, 247 Kuwaiti crude and its products, 161 Hindered amine Oxidation recycling Reaction mechanism and kinetics of aqueous solutions of 2-amino-2- Towards an electrochemical process for recovering sulphur dioxide, 101 methyl-1,3-propandiol and carbon dioxide, 67 Ozonation process Hollow fibres Effect of reaction medium on ozone mass transfer and applications to Membrane aeration bioreactors for wastewater treatment: completely pulp bleaching, 23 mixed and plug-flow operation, 131 Ozone Hydrocyclones Effect of reaction medium on ozone mass transfer and applications to A general model for hydrocyclone partition curves, 53 pulp bleaching, 23 Interfacial area The effects of a surfactant on the mass transfer in spray-tower extraction Partition curve column, 77 A general model for hydrocyclone partition curves, 53 Pellets Kinetics Modelling catalytic combustion of carbon monoxide and hydrocarbons Reaction mechanism and kinetics of aqueous solutions of 2-amino-2- over catalytically active wire meshes, 205 methyl-1,3-propandiol and carbon dioxide, 67 Pentachlorophenol Wet air oxidation: a review of process technologies and aspects in Wastewater pretreatment with ultrasonic irradiation to reduce toxicity, reactor design, 143 93 Subject Index of Volume 7723/ Chemical Engineering Journal 73 (1999) 267-270 Period of the bed protection Single-stage flashing External film control of the fixed bed adsorption, 85 Multi-stage flash desalination: present and future outlook, 173 Pervaporation Solid—liquid extraction Organophilic pervaporation: prospects and performance, 113 Solid-liquid extraction from plants — experimental kinetics and mod- Petroleum products elling, 255 Modelling of the rate of oil spill disappearance from seawater for Spray Kuwaiti crude and its products, 161 Weir flow and liquid height on sieve and valve trays, 191 Plate Stacks Towards an electrochemical process for recovering sulphur dioxide, 101 Pressure drop modelling for liquid feed direct methanol fuel cells . Part Plug flow reactor 1. Model development, 217 Membrane aeration bioreactors for wastewater treatment: completely Pressure drop modelling for liquid feed direct methanol fuel cells Part II. mixed and plug-flow operation, 131 Model based parametric analysis, 229 Polarization effects Stefan—Maxwell Application of Stefan—Maxwell approach to azeotropic separation by On the effect of inert gases in breaking the formic acid—water azeotrope membrane distillation, 71 by gas-gap membrane distillation, 37 Porous powders Stopped-flow Extension du procédé de dépot de silicium par CVD en lit fluidisé a des Reaction mechanism and kinetics of aqueous solutions of 2-amino-2- conditions opératoires peu conventionnelles: dép6ts sur poudres methyl-1,3-propandiol and carbon dioxide, 67 poreuses et/ou sous pression réduite, 61 Sulphur dioxide Pressure drop modelling Towards an electrochemical process for recovering sulphur dioxide, Pressure drop modelling for liquid feed direct methanol fuel cells . Part 101 1. Model development, 217 Surfactant Pressure drop The effects of a surfactant on the mass transfer in spray-tower extraction Pressure drop modelling for liquid feed direct methanol fuel cells Part II. column, 77 Model based parametric analysis, 229 System analysis Process design Life cycle assessment and its application to process selection, design Life cycle assessment and its application to process selection, design and optimisation, | and optimisation, | Organophilic pervaporation: prospects and performance, 113 Thermal spraying Process technology Modelling catalytic combustion of carbon monoxide and hydrocarbons Wet air oxidation: a review of process technologies and aspects in over catalytically active wire meshes, 205 reactor design, 143 Toxicity Pseudocomponents Wastewater pretreatment with ultrasonic irradiation to reduce toxicity, Modeiling of the rate of oil spill disappearance from seawater for 93 Kuwaiti crude and its products, 161 Tracer studies Pulp bleaching Mixing in circulating flows, 29 Effect of reaction medium on ozone mass transfer and applications to Two-phase flow pulp bleaching, 23 Pressure drop modelling for liquid feed direct methanol fuel cells. Part Pure oxygen 1. Model development, 217 Membrane aeration bioreactors for wastewater treatment: completely Pressure drop modelling for liquid feed direct methanol fuel cells Part II. mixed and plug-flow operation, 131 Model based parametric analysis, 229 Two-phase Rate of disappearance Two-phase electrophoresis separation of dyestuffs from dilute solution, Modelling of the rate of oil spill disappearance from seawater for 137 Kuwaiti crude and its products, 161 Reactor design Towards an electrochemical process for recovering sulphur dioxide, 101 Ultrasound Reduced pressure Wastewater pretreatment with ultrasonic irradiation to reduce toxicity, Extension du procédé de dépdt de silicium par CVD en lit fluidisé 4 des 93 conditions opératoires peu conventionnelles: dépots sur poudres poreuses et/ou sous pression réduite, 61 Valve tray Regime Weir flow and liquid height on sieve and valve trays, 191 Weir flow and liquid height on sieve and valve trays, 191 Viscoelastic suspensions Heat transfer in the drag reducing regime of wood pulp fibre suspen- Sedimentation sions, 247 Modelling of the rate of oil spill disappearance from seawater for Kuwaiti crude and its products, 161 Sieve tray Waste minimisation Weir flow and liquid height on sieve and valve trays, 191 Life cycle assessment and its application to process selection, design Silane and optimisation, | Extension du procédé de dépot de silicium par CVD en lit fluidisé a des Wastewater treatment conditions opératoires peu conventionnelles: dép6ts sur poudres Membrane aeration bioreactors for wastewater treatment: completely poreuses et/ou sous pression réduite, 61 mixed and plug-flow operation, 131 Silicon Wastewater pretreatment with ultrasonic irradiation to reduce toxicity, Extension du procédé de dépét de silicium par CVD en lit fluidisé a des 93 conditions opératoires peu conventionnelles: dépdts sur poudres Wastewater poreuses et/ou sous pression réduite, 61 Organophilic pervaporation: prospects and performance, 113 270 Subject Index of Volume 73/Chemical Engineering Journal 73 (1999) 267-270 Water desalination Wet air oxidation: a review of process technologies and aspects in Multi-stage flash desalination: present and future outlook, reactor design, 143 Water-to-oil volume ratio Wire mesh Effects of preparation variables of enzyme-encapsulating water-in-oil Modelling catalytic combustion of carbon monoxide and hydrocarbons emulsion on enzymatic reaction conversion and emulsion stability in over catalytically active wire meshes, 205 an enzyme-emulsion-—liquid—-membrane reactor, 43 Wood pulp Weir Heat transfer in the drag reducing regime of wood pulp fibre suspen- Weir flow and liquid height on sieve and valve trays, 191 sions, 247 Wet air oxidation