chant™ accessories index chant™ accessories index

61 Pages·2013·20.86 MB·English

chant™ accessories index chant™ accessories index
Escutcheons 2 m Axial Telescopic Stays 46 l
Door Stops 5 m BP Hinges 36 l
Line Door Stops 5 m Bronze Hinges 37
Magnetic Door Stops 6 l Cabin Hooks 8 l
Hold Backs 7 m Casement Fasteners 40 m
Line Hold Backs 7 m 180º Casement Fasteners 42 l
Cabin Hooks 8 l Custom Components for Sliding Door Locks 16 l
Introduction to Flush Pulls 9 m Door Stops 5 m
Flush Pulls 10 m Drawer Pulls 54 l
VS Flush Pulls 11 l Dust Sockets 27 l
Offset Flush Pulls 12 l Escutcheons 2 m
Recessed Pulls 13 l Euro Locking Flush Pulls 50mm Backset 23 l
Sliding Door Hand Pulls 14 m Flush Pulls 11 l
Privacy Flush Pulls 15 m Flush Pulls 10 m
Custom Components for Sliding Door Locks 16 l Flush Pull Bolts 28
Locking Flush Pulls 35mm Backset 18 m Flush Pull Bolts - Aluminium Doors 29 m
Locking Flush Pulls 50mm Backset 19 m Flush Sliding Bolts 24
VS Locking Flush Pulls 35mm Backset 20 l Handrail Supports 39 m
VS Locking Flush Pulls 50mm Backset 21 l Hold Backs 7 m
VS Euro Locking Flush Pulls 35mm Backset 22 l VS Introduction to Flush Pulls 9 m
Euro Locking Flush Pulls 50mm Backset 23 l Key Insert Lock 26
Flush Sliding Bolts 24 Lift and Slide Handle 56 l
Short Flush Sliding Bolts 26 m Line Door Stops 5 m
Key Insert Lock 26 Line Hold Backs 7 m
Dust Sockets 27 l Line Shelf and Curve Shelf 52 l
Flush Pull Bolts 28 Line Toilet Roll Holder and
Flush Pull Bolts - Aluminium Doors 29 m Locking Flush Pulls 35mm Backset 18 m
VS Euro Locking Flush Bolts 30 l Locking Flush Pulls 50mm Backset 19 m
Square Bolts 32 m Magnetic Door Stops 6 l VS
Push Plates 34 Offset Flush Pulls 12 l
Pull Handle Back Plates 35 Pedestal Toilet Roll Holder 53 l
BP Hinges 36 l Privacy Flush Pulls 15 m
Bronze Hinges 37 Pull Handle Back Plates 35
Handrail Supports 39 m Pull Out Clothes Rod 50 l
Casement Fasteners 40 m Push Plates 34
180º Casement Fasteners 42 l Recessed Pulls 13 l
Tilt and Turn 43 l Retrofit Flush Pulls 55 l
Security Stays 44 m Robe & Coat Hooks 51 l
Telescopic Stays 45 m Security Stays 44 m
Axial Telescopic Stays 46 l Short Flush Sliding Bolts 26 m
Spring Catch 48 l Sliding Door Hand Pulls 14 m
Twin Bolt 49 l Spring Catch 48 l
Pull Out Clothes Rod 50 l Square Bolts 32 m
Robe & Coat Hooks 51 l Telescopic Stays 45 m
Line Shelf and Curve Shelf 52 l Tilt and Turn 43 l
Line Toilet Roll Holder and Twin Bolt 49 l
Pedestal Toilet Roll Holder 53 l VS Euro Locking Flush Bolts 30 l
Drawer Pulls 54 l VS Euro Locking Flush Pulls 35mm Backset 22 l VS
Retrofit Flush Pulls 55 l VS Locking Flush Pulls 35mm Backset 20 l
VS Locking Flush Pulls 50mm Backset 21 l
Lift and Slide Handle 56 l
A1
Escutcheons
Profile Cylinder Escutcheons
Oval Cylinder Escutcheons 3403 to 3503
3400 to 3500 Use with all profile cylinder mortise locks.
Use with Legge 990 MF Series, Lockwood 3500 Series,
Maximum door thickness
Astra mortise locks (Australasia), and Union (UK).
3403, 3443, 3453, 3473, 3493
escutcheon with 5 pin cylinder 46mm
Maximum door thickness with standard length cylinders
3403, 3443, 3453, 3473, 3493
3400, 3440, 3450, 3470, 3490 Escutcheon 56mm
escutcheon with 6 pin cylinder 54mm
3410, 3420, 3430 Escutcheon 52mm
3413, 3423, 3433, 3503
3500 Escutcheon 50mm
escutcheon with 5 pin cylinder 42mm
3413, 3423, 3433, 3503
Fastened with socket set screw on the underside.
escutcheon with 6 pin cylinder 50mm
To specify: 3400 etc., Finish.
Fastened with socket set screw on the underside.
Note: The term “spindle” below, is also termed “Tail Piece”. To specify: 3403 etc., Finish
Pull Turns 3404A to 3504A and 3405A to 3505A
Turn Escutcheons
For Legge 990 Series mortise locks.
3401 to 3501
The turn mechanism is fastened to the door with screws, Pull Turns 3404B to 3504B and 3405B to 3505B
then concealed by either a ‘screw-on’ round style cover or a For SAB and similar profile cylinder mortise locks.
socket set screw on the underside of the square style covers.
Pull Turns are fitted to the inside of entrance doors to withdraw
Key bars or recess for spindle to suit locks as detailed.
the latch bolt, when key entry is used on the outside. The turn
base is securely fastened to an adaptor plate which is fixed to
A – 6mm x 2mm bar for:
the side of the lock case prior to installation in the door.
1. Legge 990 MF Series and Lockwood 3500 Series
mortise locks. (Australasia) The Pull Turns in group 3405 to 3505 are a styling alternative
2. Baton and similar tubular deadbolts. to the previous group. The turn knob is fitted to a boss on the
B – ³⁄16” square spindle for Yale 4600, 8600 and 8700, rose base with a socket set screw.
and Schlage L Series mortise locks (USA)
Depending on the lock used, specify the spindle bar type required
C – 4.5mm square spindle These spindles have a 2mm
from the chart opposite for turn escutcheons: typically A, E or F.
D – 7.0mm square spindle flat extension bar when
Note: the 3444 to 3494 and 3445 to 3495 Pull Turns can not
E – 7.6mm square spindle ordered with Emergency
be used with the adaptor plate because of their narrow body.
F – 8.0mm square spindle Turns. Add suffix ET to order
They are fastened instead with four woodscrews to the surface of
G – 5.0mm square spindle code eg. To specify:
the door. Refer to Technical Section for an exploded view of the
H – 6.0mm square spindle 3401F/Finish/ET
fastening of the Pull Turn to the lock.
J – ³⁄16” square spindle on the diamond( ) for Accurate Locks To specify: 3404A or B etc., Spindle Type, Finish
and Baton privacy Bolts (USA)
L – 8mm square recess for chant™ Cylinder Turn Adaptor. Escutcheon Dimensions
To specify: 3401/A, B, etc./Finish Diameter or square 50mm
Line range 1 (vertical) 32mm x 50mm
Line range 2 (horizontal) 50mm x 32mm
Emergency Turn Escutcheons Line range 3 50mm x 38mm
3402 to 3502 Line range 4 60mm x 32mm
The turn mechanism is fastened to the door with screws, Line range 5 60mm x 38mm
then concealed by either a ‘screw-on’ round style cover or 3400, 3403, 3440, 3443, 3450, 3453
a socket set screw on the underside of the square style 3470, 3473, 3490, 3493
covers. Turn operated by the key bar on 3401 to 3501 Turn Cylinder escutcheon projection 7mm
Escutcheon above.
To specify: 3402 etc., Finish 3410, 3413, 3420, 3423, 3430, 3433
Cylinder escutcheon projection 9mm
3500, 3503
Emergency Turn / Indicator Escutcheons
Cylinder escutcheon projection 10mm
3402i to 3502i
The turn mechanism is fastened to the door with screws, 3401, 3411, 3421, 3431, 3441, 3451
then concealed by either a ‘screw-on’ round style cover or 3461, 3471, 3481, 3491, 3501
a socket set screw on the underside of the square style covers. Turn escutcheon projection 30mm
Turn operated by key bar on 3401 to 3501 Turn Escutcheon
3404, 3414, 3424, 3434, 3444, 3454
above. Red and green colour indicator behind the turn button
3464, 3474, 3484, 3494, 3504
shows the lock status.
Pull/Turn escutcheon projection 48mm
To specify: 3402i etc., Finish
Non-standard Escutcheons: Custom shaped escutcheons can
be produced to order.
A2
m Additions or changes to existing product ranges
l New product ranges

Side
Profile
Radius
3400 3401 3402 3402i 3403 3404 3405
Facet
3410 3411 3412 3412i 3413 3414 3415
Square
3420 3421 3422 3422i 3423 3424 3425
Pyramid
3430 3431 3432 3432i 3433 3434 3435
Line
3440 3441 3442 3442i 3443 3444 3445
Line A1
3440 - A1 3441 - A1 3442 - A1 3442i - A1 3443 - A1 3444 - A1 3445 - A1
Angle/
Rod
3450 3451 3452 3452i 3453 3454 3455
Line 2
3461 3462 3462i 3464 3465
Line 3
3470 3471 3472 3472i 3473 3474 3475
Line 4
3481 3482 3482i 3484 3485
Line 5
3490 3491 3492 3492i 3493 3494 3495 A3
3v
Cylinder Escutcheons for Round
or USA Cylinder Barrels
Radius
These escutcheons are designed to suit three types of round
cylinders. The code number suffix denotes the type of cylinder,
3406-1 3406-2 3406-3
e.g.
3601–1 1¼” Ø (32mm) x 1/” (4mm) deep recess
Facet 8
for 1¼” Ø Cylinders
3416-1 3416-2 3416-3
1¼
Square
length 4
3426-1 3426-2 3426-3 3601–2 13/” Ø (35mm) x 1/” (4mm) deep recess
8 8
for 13/” Ø Cylinders
8
Pyramid
13/8
3436-1 3436-2 3436-3
length 4
Line* 3601–3 13/” Ø (35mm) x 1/ ” (1.6mm) deep recess
8 16
for 13/” Ø Cylinders with a chamfered face
8
Angle/ 13/8
Rod
length 1.6
3456-1 3456-2 3456-3
*These escutcheons are not available as they are 32mm high
Line 2*
and will not accommodate the 35mm Ø cylinder flange.
Covered cylinder escutcheons for round or USA cylinder
barrels
Line 3
3476-1 3476-2 3476-3
Line 4*
3516-1 3516-2 closed
Line 5
3496-1 3496-2 3496-3
Motor/
Axis
A4 3506-1 3506-2 3506-3 3526-1 3526-2 closed
3v
Side
Profile
Motor/
Axis
3500 3501 3502 3502i 3503 3504 3505
Curve
3540 3541 3542 3542i 3543 3544 3545
Line
3550 3551 3552 3552i 3553 3554 3555
Square
Line
3550 - A1 3551 - A1 3552 - A1 3552i - A1 3553 - A1 3554 - A1 3555 - A1
Line 3
3560 3561 3562 3562i 3563 3564 3565
A5
Cylinder Escutcheons for Round
or USA Cylinder Barrels
Curve
These escutcheons are designed to suit three types of round
cylinders. The code number suffix denotes the type of cylinder,
3546-1 3546-2 3546-3 e.g.
3601–1 1¼” Ø (32mm) x 1/” (4mm) deep recess
8
for 1¼” Ø Cylinders
Line
1¼
3556-1 3556-2 3556-3
length 4
3601–2 13/” Ø (35mm) x 1/” (4mm) deep recess
8 8
for 13/” Ø Cylinders
8
Line 3
3566-1 3566-2 3566-3 13/8
length 4
3601–3 13/” Ø (35mm) x 1/ ” (1.6mm) deep recess
8 16
for 13/” Ø Cylinders with a chamfered face
8
13/8
length 1.6
*These escutcheons are not available as they are 32mm high
and will not accommodate the 35mm Ø cylinder flange.
A6
Bell Push
Chant™ provides two types of Bell Push, one having a luminous
concentric screen around the push button and one without the
luminous characteristics. The screen glows once the button is
3407-1 3407-2 activated providing a positive visual feedback of the bell activation.
These Bell Push are available with our range of escutcheons to
match the interior style language.
3417-1 3417-2
3427-1 3427-2 3557-1 3557-2
3437-1 3437-2
3447-1 3447-2
3457-1 3457-2
3467-1 3467-2
3477-1 3477-2
3487-1 3487-2
3497-1 3497-2
3507-1 3507-2
A7
Door Stops Line Door Stops
Wall Door Stop 3201 Bifold Door Stop 3210
Diameter at base 25mm Width 50mm
Projection 75mm Height 25.4 mm
Projection 17.5mm
The mounting collar is fastened to the
wall with an 8 gauge screw. The Door
Stop is fastened to the collar with 2 x Two mounting collars are fastened to
socket set screws. the door with two 6 gauge screws.
The Door Stop is fastened to the
collars with 2 x socket set screws.
Floor Door Stop 3202
Diameter at base 38mm
Projection 35mm Wall Door Stop 3211
Square 22mm
Fastened to the floor with 2 x
woodscrews or, 2 x 6.0 or 6.5mm Projection 75mm
countersunk masonry anchors.
The rubber insert is fastened by
The mounting collar is fastened to the
a hex cap screw from the rear.
wall with an 8 gauge screw. The Door
Stop is fastened to the collar with 2 x
socket set screws.
Floor Door Stop 3203
with 15mm Extension
Diameter at base 42mm Floor Door Stop 3212
Projection 50mm
Square 32mm
Projection 35mm
Fastened to the floor with
2 x woodscrews or, 2 x 6.0 or
6.5mm countersunk masonry anchors. Fastened to the floor with 2 x
The rubber insert is fastened by woodscrews or, 2 x 6.0 or 6.5mm
a hex cap screw from the rear. countersunk masonry anchors. The
rubber insert is fastened by a hex cap
screw from the rear.
Wall Door Stop 3205
Diameter at base 25mm
Projection 75mm Floor Door Stop 3213
Square 32mm
The mounting collar is fastened to the
wall with an 8 gauge screw. The Door Projection 50mm
Stop is fastened to the collar with 2 x
socket set screws.
Fastened to the floor with 2 x
woodscrews or, 2 x 6.0 or 6.5mm
countersunk masonry anchors.
Floor Door Stop 3206 The rubber insert is fastened by a
Diameter at base 38mm hex cap screw from the rear.
Projection 35mm
Fastened to the floor with 2 x Sliding Door Stop 3214
woodscrews or, 2 x 6.0 or 6.5mm
countersunk masonry anchors. Rectangular 15 x 32mm
The rubber insert is fastened by a hex Length 40mm
cap screw from the rear.
The mounting base is fastened to the
Floor Door Stop 3207 door with 4 x 8g screws. Door Stop
clips onto the base.
Diameter at base 38mm
Projection 50mm
Carpet Base 3219
Fastened to the floor with
2 x woodscrews or, 2 x 6.0 or Square 38mm
6.5mm countersunk masonry anchors. Height 6mm
The rubber insert is fastened by a hex
cap screw from the rear.
Fastened to a carpeted floor first then
fasten a 3212 or 3213 floor door
Carpet Base 3209 stop to it. The Carpet Base is secured
to the floor with two screws on its
Diameter 44mm centreline to keep it flat. the door stop
Height 6mm then stays perpendicular to the door.
Fastened to a carpeted floor first then
fasten a 3202, 3206 or 3207 Floor
Door Stop to it. The Carpet Base is
secured to the floor with two screws
on its centreline to keep it flat. the
door stop then stays perpendicular to
the door.
A8
Magnetic Wall Stop Magnetic Door Stops
3220
Square 32mm Chant™ magnetic door stops are unique in that they have multiple
Lenghts 70mm hold strengths. The two steel magnet discs can be rotated 180
Projection 86 or 89mm degrees to provide two different hold back strengths along with
Door stop below shown with two keeper styles providing two additional strength options.
The mounting collar is fastened to the
the magnet discs rotated to
wall with an 8 gauge screw. The Door
the round position. The magnet and discs are mounted on a spindle with flats on each
Stop is fastened to the collar with 2 x
socket set screws. The cap is fastened end. The spindle flats press against two springs in the base and
with a socket set screw on one side. the cap and align the magnet discs either way. The springs also
cushion the contact of the door and keeper onto the magnet discs.
The steel magnet discs, the plug in Keeper A and Keeper B are
Magnetic Floor Stop
Electroless Nickel Plated for a long service life outdoors.
3221
3221W One use of a magnetic door stop is as a hold back function on
(wall mount, radiused on all sides) an exterior door. Therefore, wind loadings play an important
Square 38mm role in their performance. As an example, the direct pressure
Projection 54 or 57mm exerted on a door of area, 2 square metres, from a wind at
40kph (24mph) is approximately 7kg. Air movements around
Fastened to the floor with 2 x woodscrews
or, 2 x 6.5mm countersunk masonry the door will have different effects on the hold back function.
anchors.
The cap is fastened with 2 x socket set
screws on the sides.
Projection Projection
* Door Stop Keeper/Strike
Magnetic Floor Stop
3222
Square 38mm
Height 60mm Radiused side of magnet Flat side of magnet discs
Projection 54 or 57mm discs visible, low strength visible, high strength
Fastened to the floor with 2 x woodscrews
or, 2 x 6.0 or 6.5mm countersunk
masonry anchors.
Keeper A
The cap is fastened with 2 x socket set
screws on the sides. Size 25 x 50mm
Projection 10mm
Brass or bronze body with a thin wall
Bifold Magnetic Catch in front of the steel plug. Provides more
3223 flexibility with the “Living” finishes.
Height 25mm
Width 50mm Holes for the semi-concealed fix
Projection 21mm mounting collars
Steel plug
Two magnets encased in brass blocks,
semi-concealed fixing with mounting
collars. Keeper A provides less magnetic hold back force
Projection Projection
Pro Magnet Catch 3228
Diameter 22mm
2kg pull 4kg pull
Door Jamb
8kg pull 12kg pull
Magnets * Keeper B provides greater magnetic hold back force
Keeper B
Size 19 x 50mm
Door Projection 10mm
Steel body. Finishes available: all
electroplated finishes.
To order Magnetic Door Stops, specify: (example) Semi-concealed fix mounting holes
Code Number Keeper Finish
Steel body

3221 A or B SCPV A9
Hold Backs Line Hold Backs
Hold Back 3240 Line Hold Back 3250
Installed length 80mm Installed length 80mm
The hook bar has an integral rubber
door stop and a nylon anti-rattle catch
mechanism.
The hook bar has an integral rubber
door stop and a nylon anti-rattle catch
mechanism.
Line Pedestal Hold Back
Pedestal Hold Back 3241 3251
Height 160mm Overall Height 160mm
Fastened to the floor with 4 x
Fastened to the floor with 3 x countersunk countersunk wood screws or 4 x
woodscrews or, 3 x 6.0 or 6.5mm 6.0 or 6.5mm countersunk masonry
countersunk masonry anchors. anchors.
Line Pedestal Hold Back
with Foot Release 3252
Pedestal Hold Back 3242
Overall Height 160mm
Height 160mm Fastened to the floor with 4 x
countersunk wood screws or 4 x
6.0 or 6.5mm countersunk masonry
Fastened to concrete with an M8
anchors.
masonry anchor.
Line Pedestal Hold Back
3253
Overall Height 160mm
Fastened to the concrete floor with
an M8 masonry anchor.
Masonry Anchor Fixing
and Stem for Pedestal
Hold Back
The column of the holdback fastens to
the stem with 2 x socket set screws
from the rear.
Line Pedestal Hold Back
with Foot Release 3254
Overall Height 160mm
Fastened to the concrete floor with
an M8 masonry anchor.
A10