Table Of Content

CEMENTanp Pergamon CONC RETE RESEARCH Index to Volume 29 (1999) 2019—2035 Index to Volume 29 1999 Volume 29, Number 1 January EDITORIAL D.M. Roy: Editorial PAPERS V. Lilkov, E. Dimitrova, and S. Gaidardzhiev: Microscopic and laser granulometric analysis of hydrating cement suspensions |. Teoreanu and G. Guslicov: Mechanisms and effects of additives from the dihydroxy-compound class on Portland cement grinding R. Yang, C.D. Lawrence, C.J. Lynsdale, and J.H. Sharp: Delayed ettringite formation in heat-cured Portland cement mortars P.-V. Viachou and J.-M. Piau: Physicochemical study of the hydration process of an oil well cement slurry before setting Q. Yu, K. Sawayama, S. Sugita, M. Shoya, and Y. Isojima: The reaction between rice husk ash and Ca(OH), solution and the nature of its product Q. Yang: Inner relative humidity and degree of saturation in high-performance concrete stored in water or salt solution for 2 years 1.W. Hamilton and N.M. Sammes: Encapsulation of steel foundry bag house dusts in cement mortar G. Renaudin, M. Francois, and O Evrard: Order and disorder in the lamellar hydrated tetracalcium monocarboaluminate compound S.P. Jiang, B.-G. Kim, and P.-C. Aitcin: Importance of adequate soluble alkali content to ensure cement/superplasticizer compatibility V.G. Papadakis: Experimental investigation and theoretical modeling of silica fume activity in concrete J. Monzo, J. Paya, M.V. Borrachero, and E. Peris-Mora: Mechanical behavior of mortars containing sewage sludge ash (SSA) and Portland cements with different tricalcium aluminate content A. Saccani and V. Magnaghi: Durability of epoxy resin-based materials for the repair of damaged cementitious composites J.-Y. Park and B. Batchelor: Prediction of chemical speciation in stabilized/solidified wastes using a general chemical equilibrium model II: Doped waste contaminants in cement porewaters S. Martinez-Ramirez: Influence of SO, deposition on cement mortar hydration T. Bakharev, J.G. Sanjayan, and Y.-B. Cheng: Alkali activation of Australian slag cements 0008-8846/99/$ — see front matter © 2000 Elsevier Science Ltd. All rights reserved. 2020 Index to Volume 29 (1999) 2019-2035 G.K.D. Pushpalal, T. Kobayashi, T. Kawano, and N. Maeda: The processing, properties, and applications of calcium aluminate-phenol resin composite K.O. Kjellsen and E.H. Atlassi: Pore structure of cement silica fume systems: 133 Presence of hollow-shell pores G. De Schutter: Hydration and temperature development of concrete made with 143 blast-furnace slag cement NEWS ITEMS 151 OBITUARY 155 1999 Volume 29, Number 2 February SPECIAL ISSUE Papers Presented at the Materials Research Society Symposium on Advances in Materials for Cementitious Composites Boston, Massachusetts, December 1-3, 1997 EDITORIAL M. Silsbee: Symposium on “Advances in Materials for Cementitious Composites,” The Materials Research Society, December 1-3, 1997 PAPERS S. Song, H.M. Jennings: Pore solution chemistry of alkali-activated ground granulated blast-furnace slag J. Péra, J. Ambroise, M. Chabannet: Properties of blast-furnace slags containing high amounts of manganese M. Andac, F.P. Glasser: Long-term leaching mechanisms of Portland cement-stabilized municipal solid waste fly ash in carbonated water A. Gadayev, B. Kodess: By-product materials in cement clinker manufacturing S.B. Park, E.S. Yoon, B.I. Lee: Effects of processing and materials variations on mechanical properties of lightweight cement composites P.J. Kim, H.C. Wu, Z. Lin, V.C. Li, B. deLhoneux, S.A.S. Akers: Micromechanics-based durability study of cellulose cement in flexure E. Salmon, M. Ausloos, N. Vandewalle: Water invasion, freezing, and thawing in cementitious materials S.-S. Hong, G.-G. Lim, B.-K. Lee, B.-J. Lee, J.-S. Rho: Mechanical strength enhancement of lower hydraulicity cementitious solid wastes using anhydrite and pozzolanic materials G.-G. Lim, S.-S. Hong, D.-S. Kim, B.-J. Lee, J.-S. Rho: Slump loss control of cement paste by adding polycarboxylic type slump-releasing dispersant C.Y. Rha, C.E. Kim, C.S. Lee, K.I. Kim, S.K. Lee: Preparation and characterization of absorbent polymer-cement composites Index to Volume 29 (1999} 2019-2035 B. Mu, Z. Li, S.N.C. Chui, J. Peng: Cementitious composite manufactured by extrusion technique D. Sohn, D.L. Johnson: Microwave curing effects.on the 28-day strength of cementitious materials D.M. Roy: Alkali-activated cements: Opportunities and challenges S.D. Chen, C.H. Hwang, K.C. Hsu: The effects of sulphonated phenolic resins on the properties of concrete S. Rols, J. Ambroise, J. Péra: Effects of different viscosity agents on the properties of self-leveling concrete A. Schwartzentruber, J.-P. Bournazel, J.-N. Gacel: Hydraulic concrete as a deep-drawing tool of sheet steel K.K. Aligizaki, P.D. Cady: Air content and size distribution of air voids in hardened cement pastes using the section-analysis method M.R. de Rooij, J.M.J.M. Bijen, G. Frens: Active thin sections to study syneresis R.A. Livingston, M. Manghnani, M. Prasad: Characterization of Portland cement concrete microstructure using the scanning acoustic microscope NEWS ITEMS Volume 29, Number 3 PAPERS A. Hauser, U. Eggenberger, and T. Mumenthaler: Fly ash from cellulose industry as secondary raw material in autoclaved aerated concrete J.O. Odigure: Grindability of cement clinker from raw mix containing metallic particles M. Singh and M. Garg: Cementitious binder from fly ash and other industrial wastes L. Li, A.A. Sagueés, and N. Poor: In situ leaching investigation of pH and nitrite concentration in concrete pore solution M.M. Reda, N.G. Shrive, and J.E. Gillott: Microstructural investigation of innovative UHPC H.S. Abdelgader: How to design concrete produced by a two-stage concreting method A. Bouguerra, H. Sallée, F. de Barquin, R.M. Dheilly, and M. Quéneudec: Isothermal moisture properties of wood-cementitious composites P. Yan, W. Yang, X. Qin, and Y. You: Microstructure and properties of the binder of fly ash-fluorogypsum-Portland Cement N.K. Katyal, R. Parkash, S.C. Ahluwalia, and G. Samuel: Influence of titania on the formation of tricalcium silicate J.-Y. Park and B. Batchelor: Prediction of chemical speciation in stabilized/solidified wastes using a general chemical equilibrium model: Part |. Chemical representation of cementitious binders Index to Volume 29 (1999) 2019-2035 M. Mouret, A. Bascoul, and G. Escadeillas: Microstructural features of concrete in relation to initial temperature—SEM and ESEM characterization W.J. McCarter, G. Starrs, and T.M. Chrisp: Immittance spectra for Portland cement/fly ash-based binders during early hydration Q. Yang and X. Wu: Factors influencing properties of phosphate cement-based binder for rapid repair of concrete S. Tandon and K.T. Faber: Effects of loading rate on the fracture of cementitious materials J.-H. Kim, R.E. Robertson, and A.E. Naaman: Structure and properties of poly(vinyl alcohol)-modified mortar and concrete COMMUNICATIONS C. Andrade, M. Castellote, C. Alonso, and C. Gonzalez: Relation between colourimetric chloride penetration depth and charge passed in migration tests of the type of standard ASTM C1202-91 H. Yan, W. Sun, and H. Chen: The effect of silica fume and steel fiber on the dynamic mechanical performance of high-strength concrete Y. Wang and D.D.L. Chung: Effect of embedded steel on the compressive damage behavior of cement mortar B. Singh, A.J. Majumdar, and K. Quillin: Properties of BRECEM: Ten-year results Z.-Q. Shi and D.D.L. Chung: Carbon fiber-reinforced concrete for traffic monitoring and weighing in motion M. Poznic, R. GabrovSek, and M. Novic: lon chromatography determination of chloride and sulphate in cement S. Wen and D.D.L. Chung: Piezoresistivity in continuous carbon fiber cement-matrix composite Y. Xu and D.D.L. Chung: Improving the workability and strength of silica fume concrete by using silane-treated silica fume F.G. Collins and J.G. Sanjayan: Workability and mechanical properties of alkali activated slag concrete F. Collins and J.G. Sanjayan: Effects of ultra-fine materials on workability and strength of concrete containing alkali-activated slag as the binder NEWS ITEMS Volume 29, Number 4 PAPERS Y. Fan, S. Yin, Z. Wen, J. Zhong: Activation of fly ash and its effects on cement properties P. Sandberg: Studies of chloride binding in concrete exposed in a marine environment Index to Volume 29 (1999) 2019-2035 S. Bagosi, L.J. Csetenyi: Immobilization of caesium-loaded ion exchange resins in zeolite-cement blends M.D.A. Thomas, P.B. Bamforth: Modelling chloride diffusion in concrete: Effect of fly ash and slag H.A. Toutanji, Z. Bayasi: Effect of curing procedures on properties of silica fume concrete K. Fukuda, H. Taguchi: Hydration of «’,- and B-dicalcium silicates with identical concentration of phosphorus oxide P. Navi, C. Pignat: Three-dimensional characterization of the pore structure of a simulated cement paste S.R. Hillier, C.M. Sangha, B.A. Plunkett, P.J. Walden: Long-term leaching of toxic trace metals from Portland cement concrete G. Calloni, P. D'Antona, N. Moroni: A new rheological approach helps formulation of gas impermeable cement slurries F.A. Rodrigues, P.J.M. Monteiro, G. Sposito: The alkali-silica reaction: The surface charge density of silica and its effect on expansive pressure M. Tokyay: Effect of chemical composition of clinker on grinding energy requirement F. Akoz, F. Turker, S. Koral, N. Yuzer: Effects of raised temperature of sulfate solutions on the sulfate resistance of mortars with and without silica fume D. Stephan, H. Maleki, D. Knofel, B. Eber, R. Hardtl: Influence of Cr, Ni, and Zn on the properties of pure clinker phases: Part |. C,S I. Tanaka, N. Suzuki, Y. Ono, M. Koishi: A comparison of the fluidity of spherical cement with that of broad cement and a study of the properties of fresh concrete using spherical cement A. Castel, R. Francois, G. Arliguie: Effect of loading on carbonation penetration in reinforced concrete elements O.M. Jensen , P.F. Hansen: Influence of temperature on autogenous deformation and relative humidity change in hardening cement paste A. Loukili, A. Khelidj, P. Richard: Hydration kinetics, change of relative humidity, and autogenous shrinkage of ultra-high-strength concrete K.O. Ampadu, K. Torii, M. Kawamura: Beneficial effect of fly ash on chloride diffusivity of hardened cement paste T. Sebok, O. Straenel: Relationships between the properties of ligninsulphonates and parameters of modified samples with cement binders. Part Il. Study of relationships between molar parameters of ligninsulphonates and characteristics of the samples tested COMMUNICATIONS S. Chatterji: Evidence of variable diffusivity of ions in saturated cementitious materials |.A. Altun: Influence of heating rate on the burning of cement clinker M.S. Morsy: Effect of temperature on electrical conductivity of blended cement pastes 2024 Index to Volume 29 (1999) 2019-2035 F. Collins, J.G. Sanjayan: Strength and shrinkage properties of 607 alkali-activated slag concrete containing porous coarse aggregate K. Kohno, T. Okamoto, Y. Isikawa, T. Sibata, H. Mori: Effects of artificial 611 lightweight aggregate on autogenous shrinkage of concrete D.P. Bentz, C.J. Haecker: An argument for using coarse cements in high-performance concretes H.B. Basri, M.A. Mannan, M.F.M. Zain: Concrete using waste oil palm shells as aggregate J.l. Escalante, G. Mendoza, H. Mancha, J. Lopez, G. Vargas: Pozzolanic properties of a geothermal silica waste material S. Chatterji: Aspects of the freezing process in a porous material—water system: Part 1. Freezing and the properties of water and ice L. Jiang, Y. Guan: Pore structure and its effect on strength of high-volume fly ash paste NEWS ITEMS 1999 Volume 29, Number 5 H. Biricik, F. Akoz, I. Berktay, A.N. Tulgar: Study of pozzolanic properties of wheat straw ash G.V. Strand, A.B. Tveit, N.R. Gjerdet: Marginal ridge strength of tunnel-prepared teeth restored with various adhesive filling materials D. Stephan, H. Maleki, D. Knofel, B. Eber, R. Hardtl: Influence of Cr, Ni, and Zn on the properties of pure clinker phases: Part Il. C,A and C,AF F. Collins, J.G. Sanjayan: Strength and shrinkage properties of alkali-activated slag concrete placed into a large column R.K. Dhir, P.C. Hewlett, T.D. Dyer: Chemical profiles of cement pastes exposed to a chloride solution spray S.R. Kaniraj, V.G. Havanagi: Compressive strength of cement stabilized 673 fly ash-soil mixtures A.R. Landa-Canovas, S. Hansen: Transmission electron microscopic study 679 of ferrite in sulfate-resisting Portland cement clinker W. Prince, R. Péerami, M. Espagne: Mechanisms involved in the accelerated 687 test of chloride permeability C.M. De O. Madivate: Theoretical energy requirement for burning clinker 695 A.M. Grabiec: Contribution to the knowledge of melamine superplasticizer 699 effect on some characteristics of concrete after long periods of hardening J.-K. Kim, Y.-¥. Kim: Fatigue crack growth of high-strength concrete in 705 wedge-splitting test F. Skvara, V. Sevéik: Influence of high temperature on gypsum-free 713 Portland cement materials M. Benzaazoua, J. Ouellet, S. Servant, P. Newman, R. Verburg: Cementitious 719 backfill with high sulfur content: Physical, chemical, and mineralogical characterization Index to Volume 29 (1999) 2019-2035 J. Garcia Iglesias, M. Menéndez Alvarez, J. Egocheaga Rodriguez: Influence of gypsum’s mineralogical characteristics on its grinding behaviour applied to cement fabrication I. Odler, J. Colan-Subauste: Investigations on cement expansion associated with ettringite formation P.R. Blankenhorn, M.R. Silsbee, B.D. Blankenhorn, M. DiCola, K. Kessler: Temperature and moisture effects on selected properties of wood fiber-cement composites K. Erdogdu, M. Tokyay, P. Turker: Comparison of intergrinding and separate grinding for the production of natural pozzolan and GBFS-incorporated blended cements R.S. Santos, F.A. Rodrigues, N. Segre, I. Joekes: Macro-defect free cements: Influence of poly(vinyl alcohol), cement type, and silica fume M. Jolin, D. Beaupre, S. Mindess: Tests to characterise properties of fresh dry-mix shotcrete COMMUNICATIONS T. Seb6k, M. VondruSka, S. Vankova: Gypsum-free cements as binders of suspensions for injections R.S. lyer, B. Stanmore: The effect of water absorption and the role of fines on the yield stress of dense fly ash slurries M. Sun, Z. Li, Q@. Mao, D. Shen: A study on thermal self-monitoring of carbon fiber reinforced concrete Y. Xu, D.D.L. Chung: Carbon fiber reinforced cement improved by using silane-treated carbon fibers N. Menek, Z. Heren: Analysis of triethanolamine in white cement pastes by voltammetric methods S. Chatterji: Aspects of freezing process in porous material-water system: Part 2. Freezing and properties of frozen porous materials M.F. Mohd Zain, K.M. Yusof, Y. Matsufuji: The influence of medium temperature environments on the water permeability of high performance mortar NOTE W.G. Hime, B. Mather: “Sulfate attack,” or is it? DISCUSSIONS G.M. Idorn: A discussion of the paper “Effect of aggregate particle size and composition on expansion of mortar bars due to delayed ettringite formation” by P.E. Grattan-Bellew, J.J. Beaudoin, and V.-G. Vallée P.E. Grattan-Bellew, J.J. Beaudoin, V.-G. Vallée: Reply to discussion of the paper “Effect of aggregate particle size and composition on expansion of mortar bars due to delayed ettringite formation” J. Bensted: A discussion of the paper “Determination of grinding aids in Portland cement by pyrolysis-gas chromatography-mass spectrometry” by A.A. Jeknavorian, E.F. Barry, and F. Serafin A.A. Jeknavorian: Reply to discussion of the paper “Determination of grinding aids in Portland cement by pyrolysis-gas chromatography-mass spectrometry” NEWS ITEMS Index to Volume 29 (1999) 2019-2035 1999 Volume 29, Number 6 PAPERS X.F. Gao, Y. Lo, C.M. Tam, C.Y. Chung: Analysis of the infrared spectrum and microstructure of hardened cement paste M. Sari, E. Prat, J.-F. Labastire: High strength self-compacting concrete: Original solutions associating organic and inorganic admixtures J. Zelicé, R. Krstulovic, E. Tkalcec, P. Krolo: Durability of the hydrated limestone-silica fume Portland cement mortars under sulphate attack A. Boddy, E. Bentz, M.D.A. Thomas, R.D. Hooton: An overview and sensitivity study of a multimechanistic chloride transport model G. Li, Y. Zhao, S.-S. Pang: Four-phase sphere modeling of effective bulk modulus of concrete R. Morlat, P. Godard, Y. Bomal, G. Orange: Dynamic mechanical thermoanalysis of latexes in cement paste B. Trunk, G. Schober, A.K. Helbling, F.H. Wittmann: Fracture mechanics parameters of autoclaved aerated concrete F.P. Glasser, A. Kindness, S.A. Stronach: Stability and solubility relationships in AFm phases: Part |. Chloride, sulfate and hydroxide E.-E. Toumbakari, D. Van Gemert, T.P. Tassios, N. Tenoutasse: Effect of mixing procedure on injectability of cementitious grouts F.R. Foulkes, P. McGrath: A rapid cyclic voltammetric method for studying cement factors affecting the corrosion of reinforced concrete C.R. Cheeseman, S. Asavapisit: Effect of calcium chloride on the hydration and leaching of lead-retarded cement M.A. Climent, E. Viqueira, G. de Vera, M.M. Lopez-Atalaya: Analysis of acid-soluble chloride in cement, mortar, and concrete by potentiometric titration without filtration steps A.A. Jeknavorian, E.F. Barry: Determination of durability-enhancing admixtures in concrete by thermal desorption and pyrolysis gas chromatography-mass spectrometry J. Schulze: Influence of water-cement ratio and cement content on the properties of polymer-modified mortars M.G. Alexander, B.J. Magee: Durability performance of concrete containing condensed silica fume M.Z. Fan, P.W. Bonfield, J.M. Dinwoodie, M.C. Breese: Dimensional instability of cement-bonded particleboard: Mechanisms of deformation of CBPB R.A. Cook, K.C. Hover: Mercury porosimetry of hardened cement pastes M.I. Sanchez de Rojas, J. Rivera, M. Frias: Influence of the microsilica state on pozzolanic reaction rate COMMUNICATIONS X. Pu: Investigation on pozzolanic effect of mineral additives in cement and concrete by specific strength index Index to Volume 29 (1999) 2019-2035 J.-T. Ding, P.-Y. Yan, S.-L. Liu, J.-Q. Zhu: Extreme vertices design of concrete with combined mineral admixtures S. Wen, D.D.L. Chung: Carbon fiber-reinforced cement as a thermistor DISCUSSIONS J. Bensted: A discussion of the paper “Use of cactus in mortars and concrete” by S. Chandra, L. Eklund, and R.R. Villarreal S. Chandra, L. Eklund, R.R. Villarreal: Reply to discussion of the paper “Use of cactus in mortars and concrete” NEWS ITEMS 1999 Volume 29, Number 7 PAPERS W.A. Tasong, S. Wild, R.J.D. Tilley: Mechanisms by which ground granulated blastfurnace slag prevents sulphate attack of lime-stabilised kaolinite A. Demirbas, A. Aslan: Evaluation of lignite combustion residues as cement additives M.C. Nataraja, N. Dhang, A.P. Gupta: Statistical variations in impact resistance of steel fiber-reinforced concrete subjected to drop weight test A. Palomo, M.T. Blanco-Varela, M.L. Granizo, F. Puertas, T. Vazquez, M.W. Grutzeck: Chemical stability of cementitious materials based on metakaolin H. Motzet, H. Pollmann: Synthesis and characterisation of sulfite-containing AFm phases in the system CaOQ-Al,0,-SO,-H2O S. Hu, Y. Li: Research on the hydration, hardening mechanism, and microstructure of high performance expansive concrete W.A. Tasong, C.J. Lynsdale, J.C. Cripps: Aggregate-cement paste interface: Part |. Influence of aggregate geochemistry G. Chanvillard: Modeling the pullout of wire-drawn steel fibers F. Schmidt-Dohl, F.S. Rostasy: A model for the calculation of combined chemical reactions and transport processes and its application to the corrosion of mineral-building materials: Part |. Simulation model F. Schmidt-Dohl, F.S. Rostasy: A model for the calculation of combined chemical reactions and transport processes and its application to the corrosion of mineral-building materials: Part Il. Experimental verification X.H. Guo, F. Tin-Loi, H. Li: Determination of quasibrittle fracture law for cohesive crack models J.I. Alvarez, A. Martin, P.J. Garcia Casado, I. Navarro, A. Zornoza: Methodology and validation of a hot hydrochloric acid attack for the characterization of ancient mortars S. Austin, P. Robins, Y. Pan: Shear bond testing of concrete repairs M.A. Pindado, A. Aguado, A. Josa: Fatigue behavior of polymer-modified porous concretes Index to Volume 29 (1999) 2019-2035 L. Zheng, J.J. Beaudoin: An assessment of the relative permeability of cement systems using AC impedance techniques Md.M. Rahman, S. Nagasaki, S. Tanaka: A model for dissolution of CaO-SiO,-H,O gel at Ca/Si > 1 S.M. Clark, G.R. Morrison, W.D. Shi: The use of scanning transmission X-ray microscopy for the real-time study of cement hydration COMMUNICATIONS X. Wu, H. Zhu, X. Hou, H. Li: Study on steel slag and fly ash composite Portland cement Y. Xu, D.D.L. Chung: Effect of carbon fibers on the vibration-reduction ability of cement M. Shi, Z. Chen, J. Sun: Determination of chloride diffusivity in concrete by AC impedance spectroscopy Y. Xu, D.D.L. Chung: Increasing the specific heat of cement paste by admixture surface treatments BOOK REVIEWS NEWS ITEMS 1999 Volume 29, Number 8 SPECIAL ISSUE Papers Presented at the Engineering Foundation International Conference on Advances in Cement and Concrete Banff, Alberta, Canada, 5—10 July 1998 EDITORIAL R.D. Hooton, M.D.A. Thomas, S.P. Shah: Symposium on “Advances in Cement and Concrete,” The Engineering Foundation, July 5-10, 1998 PAPERS 1.G. Richardson: The nature of C-S-H in hardened cements G.W. Scherer: Structure and properties of gels S. Hanehara, K. Yamada: Interaction between cement and chemical admixture from the point of cement hydration, absorption behaviour of admixture, and paste rheology P.W. Brown: Hydration behavior of calcium phosphates is analogous to hydration behavior of calcium silicates H.F.W. Taylor: Distribution of sulfate between phases in Portland cement clinkers S. Diamond: Aspects of concrete porosity revisited J.G.S. van Jaarsveld, J.S.J. van Deventer: The effect of metal contaminants on the formation and properties of waste-based geopolymers