Blueprints to build a modified Amish Shed Library

13 Pages·2014·0.15 MB·English

Hinges aren't shown,
use 2 self closing hinges.
A
Protect with shingles,
metal or another
appropriate material.
A stop block may be
needed inside to prevent
stress on the door and hinges.
DETAIL A
Paint or stain
SCALE 1 : 8
exterior to protect
fromweather
Drawn By: Adam Plavinskis
Title:
Little free library
One inch: Date:
12/2/2014
Scale: Page:
1:24 1 of 13
5 4 3 2 1
16.250
14.750
Drawn By: Adam Plavinskis
Title:
little free library (bottom)
.625
One inch: Date:
12/2/2014
Scale: Page:
1:4 2 of 13
5 4 3 2 1
15.000
6.340°
21.625
Drawn By: Adam Plavinskis
Title:
little free library (back)
.625
One inch: Date:
12/2/2014
Scale: Page:
1:4 3 of 13
5 4 3 2 1
.625
14.841
23.194 21.556
6.340°
Drawn By: Adam Plavinskis
Title:
little free library (side)
14.750
One inch: Date:
12/2/2014
Scale: Page:
1:4 4 of 13
5 4 3 2 1
.625
.629
1 : 1 scale
15.000
1.569 1.569 1.500
6.340°
.625
Drawn By: Adam Plavinskis
Title:
little free library (front)
One inch: Date:
12/2/2014
Scale: Page:
1:4 5 of 13
5 4 3 2 1
19.250
.625
96.340°
20.123
20.000
83.660°
Drawn By: Adam Plavinskis
Title:
little free library (top)
One inch: Date:
12/2/2014
Scale: Page:
1:4 6 of 13
5 4 3 2 1
15.000
12.000
.625
Drawn By: Adam Plavinskis
The shelf is attached 12" above the inside
floor of the library. This results in a shelf
Title:
that is 12" on the bottom and one that is
little free library (shelf)
9" on the top. It can be secured with dowels
or screwed in from the outside.
One inch: Date:
12/2/2014
Scale: Page:
1:4 7 of 13
5 4 3 2 1
20.878
1.875
83.660°
20.000 96.340°
This is the trim for the roof of
the library. It's made of 3/8" by
1 1/2" stock and mitred on the
corners. It's drawn here as a single
component but in reality it would be
individual pieces attached with
wood glue and brads.
20.750
Drawn By: Adam Plavinskis
.375
Title:
little free library (roof trim)
20.000
One inch: Date:
12/2/2014
Scale: Page:
1:6 8 of 13
5 4 3 2 1
1.250 1.250
1.250
23.889 23.750
17.500 1.250 22.250 22.111
6.340°
15.000
13.500
1.250
16.000
This is the trim for the body of
the library. It's made of 5/8" by
1 1/4" stock and mitred on the
corners. The bottom edge trim
is on 3 sides only as the door
takes up the 4th side. It's drawn
here as a single component but
in reality it would be individual pieces
attached with wood glue and brads.
.625
.625 .625
Drawn By: Adam Plavinskis
Title:
little free library (corner trim)
One inch: Date:
12/2/2014
Scale: Page:
1:8 9 of 13
5 4 3 2 1
R.250 TYP
12.000
2.000 TYP
1.000
19.250
22.250
.188
11.125
15.000
Rabbet for
glass window
1/8" deep
Drawn By: Adam Plavinskis
Title:
.625 little free library (door)
One inch: Date:
12/2/2014
Scale: Page:
1:6 10 of 13
5 4 3 2 1