Biodegradable Polymers, Blends and Composites

748 Pages·2021·23.053 MB·English

by  Sanjay Mavinkere Rangappa (editor), Jyotishkumar Parameswaranpillai (editor), Suchart Siengchin (editor), M. Ramesh (editor)

Biodegradable Polymers,
Blends and Composites
Woodhead Publishing Series in Composites
Science and Engineering
Biodegradable Polymers,
Blends and Composites
Edited by
Sanjay Mavinkere Rangappa
Jyotishkumar Parameswaranpillai
Suchart Siengchin
M. Ramesh
Editor-in-Chief
Professor Costas Soutis
Series Editor
Professor Suresh G. Advani
Professor Leif Asp
Professor Yuris A. Dzenis
Professor Ing. Habil. Bodo Fiedler
Professor Adrian Mouritz
Professor Chun H. Wang
WoodheadPublishingisanimprintofElsevier
TheOfficers’MessBusinessCentre,RoystonRoad,Duxford,CB224QH,UnitedKingdom
50HampshireStreet,5thFloor,Cambridge,MA02139,UnitedStates
TheBoulevard,LangfordLane,Kidlington,OX51GB,UnitedKingdom
Copyright©2022ElsevierLtd.Allrightsreserved.
Nopartofthispublicationmaybereproducedortransmittedinanyformorbyanymeans,
electronicormechanical,includingphotocopying,recording,oranyinformationstorage
andretrievalsystem,withoutpermissioninwritingfromthepublisher.Detailsonhowto
seekpermission,furtherinformationaboutthePublisher’spermissionspoliciesandour
arrangementswithorganizationssuchastheCopyrightClearanceCenterandthe
CopyrightLicensingAgency,canbefoundatourwebsite:www.elsevier.com/permissions.
Thisbookandtheindividualcontributionscontainedinitareprotectedundercopyrightby
thePublisher(otherthanasmaybenotedherein).
Notices
Knowledgeandbestpracticeinthisfieldareconstantlychanging.Asnewresearchand
experiencebroadenourunderstanding,changesinresearchmethods,professional
practices,ormedicaltreatmentmaybecomenecessary.
Practitionersandresearchersmustalwaysrelyontheirownexperienceandknowledgein
evaluatingandusinganyinformation,methods,compounds,orexperimentsdescribed
herein.Inusingsuchinformationormethodstheyshouldbemindfuloftheirownsafety
andthesafetyofothers,includingpartiesforwhomtheyhaveaprofessionalresponsibility.
Tothefullestextentofthelaw,neitherthePublishernortheauthors,contributors,or
editors,assumeanyliabilityforanyinjuryand/ordamagetopersonsorpropertyasamatter
ofproductsliability,negligenceorotherwise,orfromanyuseoroperationofanymethods,
products,instructions,orideascontainedinthematerialherein.
LibraryofCongressCataloging-in-PublicationData
AcatalogrecordforthisbookisavailablefromtheLibraryofCongress
BritishLibraryCataloguing-in-PublicationData
AcataloguerecordforthisbookisavailablefromtheBritishLibrary
ISBN:978-0-12-823791-5
ForinformationonallWoodheadPublishingpublicationsvisit
ourwebsiteathttps://www.elsevier.com/books-and-journals
Publisher:MatthewDeans
AcquisitionsEditor:GwenJones
EditorialProjectManager:JoshuaMearns
ProductionProjectManager:SwapnaSrinivasan
CoverDesigner:VictoriaPearson
TypesetbyTNQTechnologies
Table of Contents
1. Introduction to biodegradable polymers
2. Natural rubber-based polymer blends, composites and
nanocomposites
3. Soy protein-based polymer blends, and composites
4. Extraction and characterization of cellulose
5. Cellulose based blends and composites
6. Chitin and chitosan-based blends and composites
7. Starch based blends and composites
8. PLA-based blends and composites
9. PHBV based blends and composites
10. PVA-based blends and composites
11. PBAT-based blends and composites
12. Hydrogel- and aerogel-based composites
13. Polyolyhydroxybutyrate (PHB)-based blends and composites
14. Active and intelligent biodegradable films and polymers
15. Biodegradable biosourced epoxy thermosets, blends, and
composites
16. Analysis and characterization of starches from alternative sources
17. Biocomposites potential for nanotechnology
18. Zein-based blends and composites
19. Biodegradable polymer blends and composites from renewable
resources
20. Electrically conductive biodegradable polymer blends and
composites
21. Biodegradable polymer blends and composites for biomedical
applications
22. Biodegradable polymer blends for tissue engineering
23. Additive manufacturing with biodegradable polymers
24. Production of biodegradable films and blends from proteins
25. Biodegradable polymer blends and composites for food-packaging
applications
26. Biodegradable polymers and green-based antimicrobial
packaging materials
Index
Contributors
V. Abinaya Department of Mechanical Engineering, PSG Institute of Technology
and Applied Research, Coimbatore, Tamil Nadu, India
Radhamanohar Aepuru Materials Engineering Division, Defence Institute of
AdvancedTechnology,Pune,Maharashtra,India;CentralInstituteofPetrochemicals
EngineeringandTechnology(CIPET):InstituteofPlasticsTechnology(IPT),Kochi,
Kerala,India;DepartamentodeIngenieríaMec(cid:1)anica,FacultaddeIngeniería,Univer-
sidad Tecnol(cid:1)ogica Metropolitana, Santiago, Chile
AnnaRafaelaCavalcanteBraga DepartmentofChemicalEngineering,Universi-
dade Federal deS~aoPaulo(UNIFESP), Diadema,Brazil
Monize Burck Department of Biosciences, Universidade Federal de S~ao Paulo
(UNIFESP), Santos, S~ao Paulo, Brazil
Jesu(cid:1)s María Frías Celayeta Dublin Institute of Technology, Environmental
Sustainability and Health Institute (EHSI), College of Sciences and Health, Dublin,
Ireland
Pijush Kanti Chattopadhyay Department of Leather Technology, Government
College of Engineering and Leather Technology (Post-Graduate), Maulana Abul
KalamAzad University ofTechnology, Kolkata, West Bengal, India
NagaSrilathaCheekuramelli CentralInstituteofPetrochemicalsEngineeringand
Technology (CIPET): Institute of Plastics Technology (IPT), Kochi, Kerala, India;
Materials Engineering Division, Defence Institute of Advanced Technology, Pune,
Maharashtra, India; Departamento de Ingeniería Mec(cid:1)anica, Facultad de Ingeniería,
Universidad Tecnol(cid:1)ogica Metropolitana, Santiago,Chile
Kraipat Cheenkachorn Department of Chemical Engineering, Faculty of
Engineering, King Mongkut’s University of Technology North Bangkok, Bangkok,
Bangkok, Thailand
Yu-Shen Cheng Department of Chemical and Materials Engineering, National
YunlinUniversity of Science andTechnology,Douliu,Yunlin, Yunlin, Taiwan
SantiChuetor DepartmentofChemicalEngineering,FacultyofEngineering,King
Mongkut’sUniversity ofTechnology NorthBangkok,Bangkok, Bangkok, Thailand
xiv Contributors
Jorge Alberto Vieira Costa College of Chemistry and Food Engineering, Federal
University ofRio Grande (FURG),Rio Grande,RS, Brazil
MousumiDeb AdvancedPolymerLaboratory,DepartmentofPolymerScienceand
Technology, Government College of Engineering and Leather Technology (Post-
Graduate), Maulana Abul Kalam Azad University of Technology, Kolkata, West
Bengal, India
B.D.S. Deeraj Department of Chemistry, Indian Institute of Space Science and
Technology,Kerala, Thiruvananthapuram, India
MarianaBuraneloEgea GoianoFederalInstituteofEducation,ScienceandTech-
nology, Rio Verde, Goi(cid:1)as, Brazil
Ant^onio Gilberto Ferreira Federal University of S~ao Carlos (UFSCar), Nuclear
Magnetic Resonance Laboratory,S~aoCarlos, Brazil
Michele Giaconia Department of Biosciences, Universidade Federal de S~ao Paulo
(UNIFESP), Santos,S~aoPaulo,Brazil
R.K. Gond Department of Mechanical Engineering, Motilal Nehru National
Institute ofTechnology,Allahabad, Prayagraj, Uttar Pradesh, India
M.K. Gupta Department of Mechanical Engineering, Motilal Nehru National
Institute ofTechnology,Allahabad, Prayagraj, Uttar Pradesh, India
Nishar Hameed Factory of the Future, Swinburne University of Technology,
Hawthorn, VIC, Australia
NamanJain DepartmentofMechanicalEngineering,MeerutInstituteofEngineer-
ing and Technology, Meerut,Uttar Pradesh,India
FarahHidayahJamaludin SchoolofBiomedicalEngineeringandHealthSciences,
FacultyofEngineering,UniversitiTeknologiMalaysia,Skudai,Johor,Malaysia
Aswathy Jayakumar School of Biosciences, Mahatma Gandhi University,
Kottayam, Kerala, India; Department of Materials and Production Engineering, The
Sirindhorn International ThaieGerman Graduate School of Engineering (TGGS),
KingMongkut’s University ofTechnologyNorthBangkok, Bangkok, Thailand
Jitha S. Jayan Department of Chemistry, School of Arts and Sciences, Amrita
Vishwa Vidyapeetham, Amritapuri,Kerala, Kollam, India
Kuruvilla Joseph DepartmentofChemistry,IndianInstitute ofSpaceScience and
Technology,Kerala, Thiruvananthapuram, India
Yong Chae Jung Institute of Advanced Composite Materials, Korea Institute of
Science and Technology (KIST),Wanju-gun, Jeonbuk, Republicof Korea
Young Nam Kim Institute of Advanced Composite Materials, Korea Institute of
Science and Technology (KIST), Wanju-gun, Jeonbuk, Republic of Korea; Depart-
ment of Chemical and Biomolecular Engineering, Yonsei University, Seodaemun-
gu, Seoul,Republic ofKorea
Contributors xv
A.V. Kiruthika Seethalakshmi Achi College for Women, Karaikudi, Tamil Nadu,
India
Sukhila Krishnan Sahrdaya College of Engineering and Technology, Department
of Applied Science and Humanities, Kodakara, Thrissur, Kerala, India
SenthilkumarKrishnasamy DepartmentofMaterialsandProductionEngineering,
TheSirindhornInternationalThaieGermanGraduateSchoolofEngineering(TGGS),
King Mongkut’sUniversity ofTechnology NorthBangkok,Bangkok, Thailand
SudheerKumar SchoolforAdvancedResearchinPetrochemicals(SARP),Labo-
ratory for Advanced Research in Polymeric Materials (LARPM), Central Institute of
Petrochemicals Engineering& Technology (CIPET), Bhubaneswar,Odisha, India
Suelen Goettems Kuntzler College of Chemistry and Food Engineering, Federal
University of Rio Grande (FURG),Rio Grande,RS, Brazil
Maria Carolina Bezerra Di-Medeiros Leal Federal University of S~ao Carlos
(UFSCar), Nuclear MagneticResonance Laboratory, S~ao Carlos,Brazil
Xiau Yeen Lee Centre for Advanced Materials, Tunku Abdul Rahman University
College (TARUC),Setapak, KualaLumpur,Malaysia
Ailton Cesar Lemes Department of Biochemical Engineering, Universidade
Federal do Rio de Janeiro (UFRJ), Technological Center, School of Chemistry, Ilha
do Fund~ao, Rio de Janeiro, Brazil; Federal University of Rio de Janeiro (UFRJ),
SchoolofChemistry,DepartmentofBiochemicalEngineering,RiodeJaneiro,Brazil
Ravi Prakash Magisetty Materials Engineering Division, Defence Institute of
AdvancedTechnology,Pune,Maharashtra,India;CentralInstituteofPetrochemicals
EngineeringandTechnology(CIPET):InstituteofPlasticsTechnology(IPT),Kochi,
Kerala,India;DepartamentodeIngenieríaMec(cid:1)anica,FacultaddeIngeniería,Univer-
sidad Tecnol(cid:1)ogica Metropolitana, Santiago, Chile
AbraMathew MaterialSciencesandTechnologyDivision,CSIR-NationalInstitute
for Interdisciplinary Science and Technology, Thiruvananthapuram,Kerala, India
SanjayMavinkereRangappa NaturalCompositeResearchGroup,Departmentof
Materials and Production Engineering, The Sirindhorn International ThaieGerman
GraduateSchoolofEngineering(TGGS),KingMongkut’sUniversityofTechnology
NorthBangkok,Bangkok, Thailand
Nyak Syazwani Nyak Mazlan Bioresource and Biorefinery Research Group,
Faculty of Science and Technology, Universiti Kebangsaan Malaysia, Bangi, Selan-
gor, Malaysia
C.D. Midhun Dominic Department of Chemistry, Sacred Heart College, Cochin,
Kerala, India
xvi Contributors
K. Madhu Mitha Department of Mechanical Engineering, PSG Institute of Tech-
nology and Applied Research, Coimbatore, Tamil Nadu,India
SmitaMohanty SchoolforAdvancedResearchinPetrochemicals(SARP),Labora-
toryforAdvancedResearchinPolymericMaterials(LARPM),CentralInstituteofPet-
rochemicalsEngineering &Technology (CIPET), Bhubaneswar,Odisha,India
Michele Greque de Morais College of Chemistry and Food Engineering, Federal
University ofRio Grande (FURG),Rio Grande,RS, Brazil
Juliana Botelho Moreira College of Chemistry and Food Engineering, Federal
University ofRio Grande (FURG),Rio Grande,RS, Brazil
Marhaini Mostapha Bioresource and Biorefinery Research Group, Faculty of
ScienceandTechnology,UniversitiKebangsaanMalaysia,Bangi,Selangor,Malaysia
DaniellaCarisaMurador DepartmentofBiosciences,UniversidadeFederaldeS~ao
Paulo(UNIFESP),Santos, S~ao Paulo, Brazil
M. Muthukrishnan Department of Mechanical Engineering, KITe
Kalaignarkarunanidhi Institute ofTechnology,Coimbatore, Tamil Nadu,India
Indu C. Nair Department of Biotechnology, Sahodaran Ayyappan Smaraka Sree
Narayana Dharma Paripalana Yogam (SAS SNDPYOGAM), Konni College,
Pathanamthitta, Kerala, India
Sanjay Kumar Nayak School for Advanced Research in Petrochemicals (SARP),
LaboratoryforAdvancedResearchinPolymericMaterials(LARPM),CentralInstitute
of Petrochemicals Engineering& Technology (CIPET),Bhubaneswar, Odisha, India
Josemar Gonçalves de Oliveira Filho S~ao Paulo State University (UNESP),
School of Pharmaceutical Sciences, Araraquara, Brazil
Jyotishkumar Parameswaranpillai Department of Bioscience, Mar Athanasios
CollegeforAdvancedStudiesThiruvalla(MACFAST),Pathanamthitta,Kerala,India
Alessandro Pegoretti University of Trento, Department of Industrial Engineering,
Trento, Italy
G.L. Praveen Wimpey Laboratories, Wimpey Building, Al Quoz, Dubai, United
Arab Emirates
E.K. Radhakrishnan School of Biosciences, Mahatma Gandhi University,
Kottayam, Kerala, India
Sabarish Radoor Department of Mechanical and Process Engineering, The
Sirindhorn International ThaieGerman Graduate School of Engineering (TGGS),
King Mongkut’s University of Technology North Bangkok, Bangkok, Thailand;
Department of Materials and Production Engineering, The Sirindhorn International
ThaieGermanGraduateSchoolofEngineering(TGGS),KingMongkut’sUniversity
of Technology North Bangkok,Bangkok, Thailand
Contributors xvii
G. Rajeshkumar Department of Mechanical Engineering, PSG Institute of
Technologyand Applied Research, Coimbatore, Tamil Nadu, India
L. Rajeshkumar Department of Mechanical Engineering, KPR Institute of
Engineering and Technology, Coimbatore, Tamilnadu,India
Abhinay Rajput Material Sciences and Technology Division, CSIR-National
Institute for Interdisciplinary Science and Technology, Thiruvananthapuram, Kerala,
India
M. Ramesh Department of Mechanical Engineering, KITeKalaignarkarunanidhi
Institute ofTechnology, Coimbatore,Tamil Nadu, India
Sergiana dos Passos Ramos Department of Biosciences, Universidade Federal de
S~ao Paulo (UNIFESP),Santos, S~ao Paulo, Brazil
Maria Luiza Rezende Ribeiro Federal University of Goi(cid:1)as (UFG), Nuclear
MagneticResonance Laboratory,Goi^ania, Brazil
Gislane Oliveira Ribeiro Federal University of Goi(cid:1)as (UFG), Nuclear Magnetic
ResonanceLaboratory, Goi^ania, Brazil
R. Ronia Richelle Department of Mechanical Engineering, PSG Institute of
Technologyand Applied Research, Coimbatore, Tamil Nadu, India
DanieleRigotti UniversityofTrento,DepartmentofIndustrialEngineering,Trento,
Italy
Haniyeh Rostamzad Fisheries Department, Faculty of Natural Resources,
University of Guilan, Sowmeh Sara, Guilan, Iran
Sushanta K. Sahoo Material Sciences and Technology Division, CSIR-National
Institute for Interdisciplinary Science and Technology, Thiruvananthapuram, Kerala,
India
Kushairi Mohd Salleh Bioresource and Biorefinery Research Group, Faculty of
ScienceandTechnology,UniversitiKebangsaanMalaysia,Bangi,Selangor,Malaysia
SathyarajSankarlal Department ofMechanicalEngineering, NationalInstitute of
Technology,Calicut, Kerala, India
Appukuttan Saritha Department of Chemistry, School of Arts and Sciences,
AmritaVishwa Vidyapeetham, Amritapuri,Kerala, Kollam, India
K.Sekar DepartmentofMechanicalEngineering,NationalInstituteofTechnology,
Calicut,Kerala, India
S. Arvindh Seshadri Department of Mechanical Engineering, PSG Institute of
Technologyand Applied Research, Coimbatore, Tamil Nadu, India