Bearing Capacity of Roads, Railways and Airfields, Two Volume Set: Proceedings of the 8th International Conference (BCR2A'09), June 29 - July 2 2009, Unversity of Illinois at Urbana - Champaign, Champaign, Illinois, USA

1542 Pages·2009·54.3 MB·English

by  Tutumluer

BEARING CAPACITY OF ROADS, RAILWAYS AND AIRFIELDS

PROCEEDINGS OF THE 8TH INTERNATIONAL CONFERENCE ON THE BEARING
CAPACITY OF ROADS, RAILWAYS AND AIRFIELDS, CHAMPAIGN, ILLINOIS, USA,
JUNE 29–JULY 2, 2009
Bearing Capacity of Roads,
Railways and Airfields
Editors
Erol Tutumluer & Imad L. Al-Qadi
Department of Civil and Environmental Engineering,
University of Illinois at Urbana-Champaign, Urbana, Illinois, USA
VOLUME I
CRC Press/Balkema is an imprint of the Taylor & Francis Group, an informa business
© 2009 Taylor & Francis Group, London, UK
Typeset by Vikatan Publishing Solutions (P) Ltd., Chennai, India
Printed and bound in the USA by Edwards Brothers, Inc, Lillington, NC
All rights reserved. No part of this publication or the information contained herein may be
reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic,
mechanical, by photocopying, recording or otherwise, without written prior permission from the
publisher.
Although all care is taken to ensure integrity and the quality of this publication and the informa-
tion herein, no responsibility is assumed by the publishers nor the author for any damage to the
property or persons as a result of operation or use of this publication and/or the information
contained herein.
Published by: CRC Press/Balkema
P.O. Box 447, 2300 AK Leiden, The Netherlands
e-mail: [email protected]
www.crcpress.com – www.taylorandfrancis.co.uk – www.balkema.nl
ISBN: 978-0-415-87199-0 (set of 2 volumes + CD-ROM)
ISBN: 978-0-415-80432-5 (vol 1)
ISBN: 978-0-415-87200-3 (vol 2)
ISBN: 978-0-203-86528-6 (ebook)
Bearing Capacity of Roads, Railways and Airfields – Tutumluer & Al-Qadi (eds)
© 2009 Taylor & Francis Group, London, ISBN 978-0-415-87199-0
Table of contents
Preface XV
E. Tutumluer & I.L. Al-Qadi
Organization XVII
VOLUME I
Keynote presentations
Recent and landmark improvements in performance characterization
of unbound aggregate bases and subbases and sublayers comprised
of Chemically Stabilized Materials (CSMs) 3
D.N. Little
The performance of rail track incorporating the effects of ballast breakage,
confining pressure and geosynthetic reinforcement 5
B. Indraratna, S. Nimbalkar & D. Christie
Airport pavement design for the 21st century 25
S.K. Agrawal
Subgrade soils
Improving subgrade strength and pavement performance by chemical
treating subgrade soils 29
N. Bandara & M.J. Grazioli
Study of dry sludge stabilization from Water Treatment Plant (WTP)
in Taiaçupeba to use as compacted soil in earthwork ditches 37
R.M. Fortes, J.V. Merighi, D.R. Pauli, M.A.L. Barros, M.H. de Carvalho,
N.C. Menetti, Á.S. Barbosa, F.V. Ribeiro & B.B. Bento
Alternatives to heavy test rolling for cohesive subgrade assessment 45
D.J. White, P.K.R. Vennapusa, H.H. Gieselman, L. Johanson & J. Siekmeier
A comparative subgrade evaluation using CBR, vane shear, light weight
deflectometer, and resilient modulus tests 57
N. Garg, A. Larkin & H. Brar
Stabilization of clays using liquid enzymes 65
Y. Yilmaz, A.G. Gungor & C. Avsar
The effect of moisture hysteresis on resilient modulus of subgrade soils 71
C. Khoury & N. Khoury
Dynamic properties of a full weathering granite subgrade and other
pavement materials studied by model tests 79
J. Zou, Z. Li & X. Cao
V
The use of geofiber and synthetic fluid for stabilizing marginal soils 89
K. Hazirbaba & B. Connor
Subgrade modification—practitioner’s experience 97
T. McCleary
“Baku Bayil Yard Site” soil improvement geotechnical works 107
E. Guler, A. Gure & E. Cetin
Resilient characteristics of bottom ash 117
H.H. Titi, A.R. Coenen & M.B. Elias
Precision triaxial equipment for the evaluation of the elastic behavior of soils 125
N. Araújo & A. Gomes Correia
Granular materials
A performance study of different curing materials applied to soil-Portland
cement base course cure 137
R.M. Fortes & J.V. Merighi
Pavement base unbound granular materials gradation optimization 145
J.P. Bilodeau, G. Doré & P. Pierre
Influence of the macroscopic cohesion on the 3D FE modeling of a flexible
pavement rut depth 155
F. Allou, C. Petit, C. Chazallon & P. Hornych
Effect of grading and moisture on the deformation properties of unbound
granular aggregates 167
L.U. Mathisen
IDOT test loop: Evaluating the field performance of various dense graded aggregates 179
G. Heckel
Analytical evaluation of unbound granular layers in regard to permanent deformation 187
L.A.T. Brito, A.R. Dawson & P.J. Kolisoja
Processed Portuguese steel slag—A new geomaterial 197
A. Gomes Correia, S.M. Reis Ferreira, A.J. Roque & A. Cavalheiro
Resilient modulus of hydraulically bound road base materials with high
volume waste dust 205
H. Al Nageim & P. Visulios
Characterizing natural and recycled granular materials for (sub)base layers
of roads by cyclic triaxial testing 215
C. Grégoire, B. Dethy, J. Detry & A. Gomes Correia
Resilient modulus of unbound base material containing extra waste
Stancombe limestone dust 225
B. Saghafi & H. Al Nageim
Characterizing aggregate permanent deformation behavior based on types
and amounts of fines 237
D. Mishra, E. Tutumluer, J. Kern & A. Butt
Asphalt mixtures
Use of polymer modified binders to reduce rutting in Nordic asphalt pavements 249
B.O. Lerfald, J. Aurstad & N.S. Uthus
VI
Contribution of asphalt mix components to permanent deformation resistance 259
P.M. Muraya, A.A.A. Molenaar & M.F.C. van de Ven
A new rutting evaluation indicator for asphalt mixtures 269
K. Su, L. Sun, Y. Hachiya & R. Maekawa
Evaluation of different predictive dynamic modulus models of asphalt
mixtures used in Argentina 275
F.O. Martínez & S.M. Angelone
Development of wear resistant pavements using polymer modified binders 285
R.G. Saba, L.J. Bakløkk, J. Aksnes & B.O. Lerfald
Permanent deformation evaluation of Idaho Superpave mixes using
the gyratory stability 295
F. Bayomy, A. Abu Abdo & M.J. Santi
Prediction of the dynamic modulus of Superpave mixes 305
A. Abu Abdo, F. Bayomy, R. Nielsen, T. Weaver, S.J. Jung & M.J. Santi
Laboratory evaluation of warm mix asphalt using Sasobit® 315
S.W. Goh, Y. Liu & Z. You
Dynamic modulus prediction of asphalt concrete using three tensile tests 321
S. Adhikari & Z. You
Assessing low temperature properties of asphalt materials by means of static
testing techniques 327
M. Wistuba, K. Mollenhauer & K. Metzker
Ageing of stone mastic asphalt and evaluation of cracking resistance 339
S. Büchler, K. Mollenhauer, M. Wistuba & P. Renken
Fatigue resistance of hot mix asphalt at low temperatures—Is there a way to reduce
the test efforts? 349
K. Mollenhauer & M. Wistuba
Hot mix asphalt produced from marble waste 359
C. Gurer, H. Akbulut & A. Yildiz
Discrete element analysis of aggregate variability, blending, and fracture
in asphalt mixture 367
E. Masad, E. Mahmoud & S. Nazarian
Multidirectional behavior of bituminous mixture 377
P. Clec’h, C. Sauzéat & H. Di Benedetto
Design of pavements containing foamed bitumen recycled layers 387
M. Losa, R. Bacci, A. Terrosi Axerio & P. Leandri
Long-term study on asphalt mixture segregation in Connecticut: Preliminary
results on use of MTV 397
D.J. Nener-Plante & A. Zofka
In-situ measurement techniques and developments
Development of the UK highways agency traffic speed deflectometer 409
B. Ferne, P. Langdale, N. Round & R. Fairclough
Implementation of a network-level falling weight deflectometer survey
of Virginia’s interstate system 419
B.K. Diefenderfer, T. Chowdhury & R.A. Shekharan
VII
Application of FBG strain sensors in the measurement of three-directional
strains within asphalt pavement 427
D. Zejiao, T. Yiqiu, C. Fengchen & L. Hao
3D visualization model of road surface 435
X. Li, S. Ma & X. Hou
Three years of high speed deflectograph measurements of the Danish state
road network 443
S. Baltzer
A method for benefiting pavement quality assurance measures related
to roughness condition surveys 451
C. Plati & A. Loizos
Structural roadway assessment with frequency response function 459
J.-M. Simonin, D. Lièvre & J.-C. Dargenton
Deflection measurement: The need of a continuous and full view approach 467
J.-M. Simonin, L.-M. Cottineau, V. Muzet, C. Heinkele & Y. Guillard
Modeling & methods of functional testing
Laboratory characterization of half-warm mix asphalts with high recycling rate
by means of the factorial experiment design approach 479
F. Olard, E. Beduneau, D. Bonneau, S. Dupriet & N. Seignez
Viability of the use of construction and demolition debris in hot mix asphalt 487
I. Pérez, M. Toledano & J. Gallego
Thermal stresses of asphalt pavement with temperature-dependent
modulus of elasticity 495
Y. Zhong & L.Geng
Rigid pavement reinforcement: Modeling of structural behavior 503
P. Domingos, M.L. Antunes & J.M.C. Neves
Development and testing of low noise pavements in Norway 513
J. Aksnes, R.G. Saba & T. Berge
Roughness progression models by regression and artificial neural
network techniques 521
E. Taddesse & H. Mork
Joint modeling for JPCP: Successes and pending problems 531
E.H. Guo
Mechanistic modelling of potential interlayer slip at base sub-base level 543
E. Horak, J.W. Maina, S.E. Emery & B. Walker
PFC2D simulation research on vibrating compaction test of soil and rock
aggregate mixture 551
X. Jia, H. Chai, Z. Yan & Y. Zheng
Axi-symmetric analyses of vertically inhomogeneous elastic multilayered systems 561
J.W. Maina, Y. Ozawa & K. Matsui
Models to estimate k subgrade reaction modulus values based on deflection
basin parameters 571
C.Y. Suzuki, C.R.G. Santos, S. Ferri, F.M. Lopes, R.T.G. Cruz & A.M. Azevedo
VIII
Application of gray theory in settlement forecast of rock-fill
highway embankment 581
X. Wang, W. Qin, M.C. Wang & Z. Wang
FEM analysis of the bearing plate deflection tests on rubblized concrete pavement 589
Y. Liu, Y. Sheng & L. Wang
Data mining applied to compaction of geomaterials 597
R. Marques, A. Gomes Correia & P. Cortez
Finite element analyses of pavement materials at or near failure: A constant
bulk modulus approach 607
C. Gonzalez & S. Jersey
Use of 3-dimensional discrete element model to examine aggregate layer
particle movement due to load wander 619
P.R. Donovan, E. Tutumluer & H. Huang
Backcalculation analyses of deflection measurements
Backcalculation of the stiffnesses of cement treated base courses using
artificial intelligence 633
M. Miradi, A.A.A. Molenaar, M.F.C. van de Ven & S. Molenaar
Bearing capacity assessment of recycled asphalt pavements 643
V. Papavasiliou & A. Loizos
Dynamic analysis of non-destructive tests 653
W.T. van Bijsterveld & R.L. Álvarez Loranca
Automated pavement thickness evaluation for FWD backcalculation 661
K.R. Maser, L.A. McGrath, B.C. Miller, H. Ceylan & G. Sanati
Analysis of FWD data and characterization of airfield pavement materials
in New Mexico 669
M.U. Ahmed, R. Bisht & R.A. Tarefder
SOFTSYS for backcalculation of full-depth asphalt pavement layer moduli 679
O. Pekcan, E. Tutumluer & J. Ghaboussi
Deterministic-empirical backcalculation of LWD deflection basins 689
R.N. Stubstad, H.C. Korsgaard, K. Olsen & J.P. Pedersen
New and/or innovative techniques in compaction & construction
Long-term in-situ measurements of concrete culverts with high fills 697
J. Vaslestad, G.Y. Yesuf & T.H. Johansen
Research and applications of new pavement structure based on large stone
porous asphalt mixture 707
B. Yufeng, W. Songgen & G. Huber
Fiber-reinforced concrete pavement design and material requirements 717
A. Bordelon & J.R. Roesler
Using falling weight deflectometer data for new construction interactive design 729
C.A. Lenngren
Appraisal of density-based field compaction control test validity 739
J. Sadrekarimi & S. Seyyedi
IX