Table Of Content

MiCOM P145 Feeder Management Relay Software Version 0310 Hardware Suffix J Relay Menu Database P145/EN GC/A11 Note: The technical manual for this device gives instructions for its installation, commissioning, and operation. However, the manual cannot cover all conceivable circumstances or include detailed information on all topics. In the event of questions or specific problems, do not take any action without proper authorization. Contact the appropriate AREVA technical sales office and request the necessary information. Any agreements, commitments, and legal relationships and any obligations on the part of AREVA including settlements of warranties, result solely from the applicable purchase contract, which is not affected by the contents of the technical manual. This device MUST NOT be modified. If any modification is made without the express permission of AREVA, it will invalidate the warranty, and may render the product unsafe. The AREVA logo and any alternative version thereof are trademarks and service marks of AREVA. MiCOM is a registered trademark of AREVA. All trade names or trademarks mentioned herein whether registered or not, are the property of their owners. This manual is provided for informational use only and is subject to change without notice. © 2006, AREVA. All rights reserved. Relay Menu Database P145/EN GC/A11 MiCOM P145 RELAY MENU DATABASE Date: 2nd June 2006 Hardware Suffix: J Software Version: 31 Connection Diagrams: 10P145xx (xx = 01 to 07) P145/EN GC/A11 Relay Menu Database MiCOM P145 MiCOM P145 Feeder Management Relays Relay Menu Database This version of the Relay Menu Database is specific to the following models: Model Number Software Number P145------0310J P145------0310 Relay Menu Database P145/EN GC/A11 MiCOM P145 Page 1 of 172 RELAY MENU DATABASE This Relay Menu Database is split into several sections, these are as follows: • Menu Database for Courier, User Interface and MODBUS • Menu Datatype Definition • Event Data for Courier, User Interface and MODBUS • IEC60870-5-103 Interoperability Guide • Internal Digital Signals • DNP3.0 Device Profile Document • Default Programmable Logic Menu database This database defines the structure of the relay menu for the courier interface, the front panel user interface and the MODBUS interface. This includes all of the relay settings and measurements. Datatypes for MODBUS and indexed strings for Courier and the user interface are cross-referenced to the Menu Datatype Definition section (using a G Number). For all settable cells the setting limits and default value are also defined within this database. Note: The following labels are used within the database. Label Description Value V1 Main VT Rating 1 (100/110V) V2 Checksynch VT Rating 1 (100/110V) V3 NVD VT Rating 1 (100/110V) Ι1 Phase CT Rating 1 or 5 (Setting 0A08) Ι2 Earth Fault CT Rating 1 or 5 (Setting 0A0A) Ι3 Sensitive CT Rating 1 or 5 (Setting 0A0C) Ι4 Mutual CT Rating 1 or 5 (Setting 0A0E) Menu datatype definition This table defines the datatypes used for MODBUS (the datatypes for the Courier and user interface are defined within the Menu Database itself using the standard Courier Datatypes). This section also defines the indexed string setting options for all interfaces. The datatypes defined within this section are cross-referenced to from the menu database using a G number. Event data This section specifies all the event information that can be produced by the relay. It details exactly how each event will be presented via the Courier, User and MODBUS interfaces. IEC60870-5-103 interoperability guide This table fully defines the operation of the IEC60870-5-103 (VDEW) interface for the relay it should be read in conjunction with the relevant section of the Communications section of this manual (P145/EN CT). P145/EN GC/A11 Relay Menu Database Page 2 of 172 MiCOM P145 Internal digital signals This table defines all of the relay internal digital signals (opto inputs, output contacts and protection inputs and outputs). A relay may have up to 512 internal signals each referenced by a numeric index as shown in this table. This numeric index is used to select a signal for the commissioning monitor port. It is also used to explicitly define protection events produced by the relay (see the Event Data section). DNP3.0 device profile document This table defines all of the objects, functions and/or qualifiers supported. References Introduction (P145/EN IT): User Interface operation and connections to the relay Communications (P145/EN CT): Overview of communication interfaces Courier User Guide R6512 Modicon MODBUS Protocol Reference Guide PI-MBUS-300 Rev E IEC60870-5-103 Telecontrol Equipment and Systems - Transmission Protocols - Companion Standard for the informative interface of Protection Equipment. Relay Menu Database P145/EN GC/A11 MiCOM P145 Page 3/172 Courier Text UI CColouRrioewr Data Type Strings MSOtDaBrtUS AEddnrdess DMaOtaDbBaUsSe Default Setting Cell Type Min Max Step PaLsesvweolrd MPo1d4e5l Comment SYSTEM DATA 00 00 * Language 00 01 Indexed String G19 G19 English Setting 0 3 1 2 * Setting applies only to interface being used Password 00 02 ASCII Password (4 chars) G20 40001 40002 G20 AAAA Setting 65 90 1 0 * Setting applies only to interface being used Binary Flag (8 bits) Sys Fn Links 00 03 G95 40003 G95 0 Setting 1 1 1 2 * Indexed String Description 00 04 ASCII Text (16 chars) 40004 40011 G3 MiCOM P145 Setting 32 163 1 2 Plant Reference 00 05 ASCII Text (16 chars) 40012 40019 G3 MiCOM Setting 32 163 1 2 * Software version 0300J only (name change) Model Number 00 06 ASCII Text (16 chars) 30020 30035 G3 Model Number Data * Firmware Number 00 07 ASCII Text (16 chars) G4 Firmware Number Data Serial Number 00 08 ASCII Text (7 chars) 30044 30051 G3 Serial Number Data * Frequency 00 09 Unsigned Integer (16 bits) 40020 G1 50 Setting 50 60 10 2 * Comms Level 00 0A Unsigned Integer (16 bits) 1 Data * Build = Courier Relay Address 00 0B Unsigned Integer (16 bits) 255 Setting 0 255 1 1 * Rear port address available via LCD Build = MODBUS Relay Address 00 0B Unsigned Integer (16 bits) 1 Setting 1 247 1 1 * Rear port address available via LCD Build = IEC60870-5-103 Relay Address 00 0B Unsigned Integer (16 bits) 1 Setting 0 254 1 1 * Rear port address available via LCD Build = DNP3.0 Relay Address 00 0B Unsigned Integer (16 bits) 1 Setting 0 65534 1 1 * Rear port address available via LCD N/A Binary Flag (16 bits) 30001 G26 Data * MODBUS only (Relay status) Plant Status 00 0C Binary Flag (16 bits) G4 30002 G4 Data * Control Status 00 0D Binary Flag (16 bits) G5 30004 G5 Data * Active Group 00 0E Unsigned Integer (16 bits) 30006 G1 Data * CB Trip/Close 00 10 Indexed String G55 No Operation Command 0 2 1 1 * Visible to LCD+Front Port CB Trip/Close N/A 00 10 Indexed String G55 40021 G55 No Operation Command 0 2 1 1 * Visible to Rear Port Software Ref. 1 00 11 ASCII Text (16 chars) 30052 30059 G3 Data * Software Ref. 2 00 12 ASCII Text (16 chars) G3 Data * Software Ref. 3 00 13 ASCII Text (16 chars) G3 Data Software Ref. 4 00 14 ASCII Text (16 chars) G3 Data Binary Flag (32 bits) Opto I/P Status 00 20 G8 30007 G8 Data * Indexed String Binary Flag (32 bits) Relay O/P Status 00 21 G9 30008 30009 G9 Data * Indexed String Binary Flag (32 bits) Alarm Status 1 00 22 G96-1 30011 30012 G96-1 Data * Indexed String Binary Flag (32 bits) MODBUS: For more than 16 optos use Opto I/P Status 00 30 G27 30725 30726 G27 Data * Indexed String DDB63-32 via registers 30725 - 30726 Binary Flag (32 bits) Relay O/P Status 00 40 G27 30723 30724 G27 Data * Indexed String Binary Flag (32 bits) Alarm Status 1 00 50 G96-1 30011 30012 G96-1 Data * Indexed String Binary Flag (32 bits) Alarm Status 2 00 51 G96-2 30013 30014 G96-2 Data * Indexed String Binary Flag (32 bits) Alarm Status 3 00 51 G96-3 30015 30016 G96-3 Data * Indexed String Access Level 00 D0 Unsigned Integer (16 bits) G1 30010 G1 Data * Relay Menu Database P145/EN GC/A11 MiCOM P145 Page 4/172 Courier Text UI CColouRrioewr Data Type Strings MSOtDaBrtUS AEddnrdess DMaOtaDbBaUsSe Default Setting Cell Type Min Max Step PaLsesvweolrd MPo1d4e5l Comment Password Control 00 D1 Unsigned Integer (16 bits) G22 40022 G22 2 Setting 0 2 1 2 * Password Level 1 00 D2 ASCII Password (4 chars) G20 40023 40024 G20 AAAA Setting 65 90 1 1 * Password Level 2 00 D3 ASCII Password (4 chars) G20 40025 40026 G20 AAAA Setting 65 90 1 2 * VIEW RECORDS 01 00 * 30100 G1 No of event records stored 30101 G1 No of fault records stored 30102 G1 No of maintenance records stored Select Event Max value is oldest record 01 01 Unsigned Integer (16 bits) 40100 G1 0 Setting 0 249 1 0 * [0...n] n is last event record Menu Cell Ref N/A 01 02 Cell Reference 30107 G13 (From Record) Data * Indicates type of event. See event sheet Time & Date 01 03 IEC870 Date & Time 30103 30106 G12 (From Record) Data * Event Text 01 04 ASCII Text (32 chars) Data * See Event sheet Event Value 01 05 Unsigned Integer (32 bits) 30108 30109 G27 Data * Note DTL depends on event type Select Event Allows Fault Record to be selected 01 06 Unsigned Integer (16 bits) 40101 G1 0 Setting 0 4 1 0 * [0...n] n is last fault record MODBUS change address 30110 G1 Data * Alarm 30011, Relay 30723, Opto 30725 30111 G1 Data * Status of current 16 ddb elements 30112 G1 Data * Additional data present Started Phase N/A Data * A B C N A/B/C/N Visible if Start A/B/C/N Tripped Phase N/A Data * A B C N A/B/C/N Visible if Trip A/B/C/N Overcurrent N/A Data * Start I> 1234 1/2/3/4 Visible if Start I>1/2/3/4 Overcurrent N/A Data * Trip I> 1234 1/2/3/4 Visible if Trip I>1/2/3/4 Neg Seq O/C N/A Data * I2>Start Trip in software versions 0200G & Start I2> 1234 0210G Neg Seq O/C N/A Data * Software version 0300J only Trip I2> 1234 Software version 0300J only Broken Conductor N/A Data * Trip Earth Fault 1 N/A Data * Start IN1> 1234 1/2/3/4 visible if Start IN1>1/2/3/4 Earth Fault 1 N/A Data * Trip IN1> 1234 1/2/3/4 visible if Trip IN1>1/2/3/4 Earth Fault 2 N/A Data * Start IN2> 1234 1/2/3/4 visible if Start IN2>1/2/3/4 Earth Fault 2 N/A Data * Trip IN2> 1234 1/2/3/4 visible if Trip IN2>1/2/3/4 Sensitive E/F N/A Data * Start ISEF> 1234 1/2/3/4 visible if Start ISEF>1/2/3/4 Sensitive E/F N/A Data * Trip ISEF> 1234 1/2/3/4 visible if Trip ISEF>1/2/3/4 Relay Menu Database P145/EN GC/A11 MiCOM P145 Page 5/172 Courier Text UI CColouRrioewr Data Type Strings MSOtDaBrtUS AEddnrdess DMaOtaDbBaUsSe Default Setting Cell Type Min Max Step PaLsesvweolrd MPo1d4e5l Comment Restricted E/F N/A Data * Trip IREF> Residual O/V NVD N/A Data * Start VN> 1 2 1/2 visible if Start VN>1/2 Residual O/V NVD N/A Data * Trip VN> 1 2 1/2 visible if Trip VN>1/2 Thermal Overload N/A Data * Alarm Trip Neg Seq O/V N/A Data * V2> Start Trip U/Voltage Start N/A Data * V< 1 2 AB BC CA 1/2/AB/BC/CA visible if Start V<1/2 U/Voltage Trip N/A Data * V< 1 2 AB BC CA 1/2/AB/BC/CA visible if Trip V<1/2 O/Voltage Start N/A Data * V> 1 2 AB BC CA 1/2/AB/BC/CA visible if Start V>1/2 O/Voltage Trip N/A Data * V> 1 2 AB BC CA 1/2/AB/BC/CA visible if Trip V>1/2 Underfrequency N/A Data * Start F< 1234 1/2/3/4 visible if Start F<1/2/3/4 Underfrequency N/A Data * Trip F< 1234 1/2/3/4 visible if Trip F<1/2/3/4 Overfrequency N/A Data * Start F> 1 2 1/2 visible if Start F>1/2 Overfrequency N/A Data * Trip F> 1 2 1/2 visible if Trip F>1/2 df/dt Protection N/A Data * Software versions 0210G and 0300J only Start df/dt>1234 df/dt Protection N/A Data * Software versions 0210G and 0300J only Trip df/dt>1234 Overadmittance N/A Data * YN> Start Trip Visible if Start YN> / Trip YN> Overconductance N/A Data * GN> Start Trip Visible if Start GN> / Trip GN> Oversusceptance N/A Data * BN> Start Trip Visible if Start BN> / Trip BN> Breaker Fail N/A Data * CB Fail 1 2 1/2 visible if CB Fail 1/2 Supervision N/A Data * VTS/CTS/VCO/CLP visible if VTS CTS VCO CLP Alarm VTS/CTS/VCO/CLP A/R State N/A Data * Trip 1 2 3 4 5 1/2/3/4 visible if SC:Count 1/2/3/4 Faulted Phase N/A 01 07 Binary Flag (8 bits) G16 30113 G16 Data * Started phases + tripped phases Binary Flag (32 bits) Start Elements 1 N/A 01 08 G84 30114 30115 G84 Data * Started main elements Indexed String Binary Flag (32 bits) Start Elements 2 N/A 01 09 G107 30116 30117 G107 Data * Started secondary elements Indexed String Relay Menu Database P145/EN GC/A11 MiCOM P145 Page 6/172 Courier Text UI CColouRrioewr Data Type Strings MSOtDaBrtUS AEddnrdess DMaOtaDbBaUsSe Default Setting Cell Type Min Max Step PaLsesvweolrd MPo1d4e5l Comment Binary Flag (32 bits) Trip Elements 1 N/A 01 0A G85 30118 30119 G85 Data * Tripped main elements Indexed String Binary Flag (32 bits) Trip Elements 2 N/A 01 0B G86 30120 30121 G86 Data * Tripped secondary elements Indexed String Binary Flag (32 bits) Fault Alarms N/A 01 0C G87 30122 30123 G87 Data * Faullt Alarms/Warnings Indexed String Fault Time 01 0D IEC870 Date & Time 30124 30127 G12 Data * Fault Record Time Stamp Active Group 01 0E Unsigned Integer (16 bits) 30128 G1 Data * System Frequency 01 0F Courier Number (frequency) 30129 G30 Data * Fault Duration 01 10 Courier Number (time) 30130 30131 G24 Data * CB Operate Time 01 11 Courier Number (time) 30132 G25 Data * Relay Trip Time 01 12 Courier Number (time) 30133 30134 G24 Data * Fault Location 01 13 Courier Number (metres) 30135 30136 G125 Data * Fault Location 01 14 Courier Number (miles) 30137 30138 G125 Data * Fault Location 01 15 Courier Number (impedance) 30139 30140 G125 Data * Fault Location 01 16 Courier Number (percentage) 30141 30142 G125 Data * IA 01 17 Courier Number (current) 30143 30144 G24 Data * IB 01 18 Courier Number (current) 30145 30146 G24 Data * IC 01 19 Courier Number (current) 30147 30148 G24 Data * VAB 01 1A Courier Number (voltage) 30149 30150 G24 Data * VBC 01 1B Courier Number (voltage) 30151 30152 G24 Data * VCA 01 1C Courier Number (voltage) 30153 30154 G24 Data * IN Measured 01 1D Courier Number (current) 30155 30156 G24 Data * IN Derived 01 1E Courier Number (current) 30157 30158 G24 Data * IN Sensitive 01 1F Courier Number (current) 30159 30160 G24 Data * IREF Diff 01 20 Courier Number (current) 30161 30162 G24 Data * Visible if low imp REF protection enabled IREF Bias 01 21 Courier Number (current) 30163 30164 G24 Data * Visible if low imp REF protection enabled VAN 01 22 Courier Number (voltage) 30165 30166 G24 Data * VBN 01 23 Courier Number (voltage) 30167 30168 G24 Data * VCN 01 24 Courier Number (voltage) 30169 30170 G24 Data * VN Derived 01 25 Courier Number (voltage) 30171 30172 G24 Data * Courier Number Admittance 01 26 30173 30174 G125 Data * Visible if admittance prot enabled (ISEF) (inverse ohms) Courier Number Conductance 01 27 30175 30176 G125 Data * Visible if admittance prot enabled (ISEF) (inverse ohms) Courier Number Susceptance 01 28 30177 30178 G125 Data * Visible if admittance prot enabled (ISEF) (inverse ohms) Courier Number Admittance 01 29 30179 30180 G125 Data * Visible if admittance prot enabled (IN) (inverse ohms) Courier Number Conductance 01 2A 30181 30182 G125 Data * Visible if admittance prot enabled (IN) (inverse ohms) Courier Number Susceptance 01 2B 30183 30184 G125 Data * Visible if admittance prot enabled (IN) (inverse ohms) Select Event Allows Self Test Report to be selected 01 F0 Unsigned Integer (16 bits) 40102 G1 Manual override to select a fault record Setting 0 4 1 2 * [0...n] n is last maintenance record Maint Text 01 F1 ASCII Text (32 chars) Data * Maint Type 01 F2 Unsigned Integer (32 bits) 30036 30037 G27 Data *