Appita Journal 1999: Vol 52 Index

5 Pages·1999·1.8 MB·English

Appita €Conferene
12th Fundamental research symposium series, each session will start with a review send a 1000 word abstract to Program
17 - 21 September 2001 paper presented by a leading scientist from Secretary, James Brander, for consideration
Oxford, United Kingdom around the world. Speakers at this symposium by the program committee, by 30 September
include Prof. J-C Roux, Prof. A Blanco, Prof.
2000. The address for abstracts is Arjo
The title for the twelfth fundamental research B Norman, Dr W Sampson, Dr M Karlsson,
symposium, to be held at Keble College Oxford Dr P Gane, Dr R Crotogino and Dr M Waller. Wiggins R&D Ltd, Butler's Court, Wattleton
in September 2001, will be The Science of Papers are now being sought to complement Road, Beaconsfield, Bucks, HP9 1RT:
Papermaking. As at earlier symposia in this these review papers. Potential authors should E-mail [email protected]
Programs
Under the title /mproving process efficiency addition points and flow rates are really set up to the degree of involvement. Mills interested
through the selection of polymers and control or not. This program provides evaluation of in joining, receive a presentation from the
of additions, Pira International has launched a the available sensor and polymer technologies program leaders before deciding on the extent,
research program to help newsprint and fine and guidance in selecting the technologies if any, of their involvement. Cost savings
paper mills improve productivity by upgrading that suit the process. Participation may be resulting from participation can be expected in
measurement and control of their wet-end at two levels, core or full program. Core the areas of drainage, machine speed, breaks,
chemistry. Running for twelve months the participation is for mills that want to share paper quality, polymer costs and losses to
program started in September 1999 with nine the knowledge and understanding that comes effluent etc.
European and North American mills from the program without the need to include Full details can be obtained from
participating but mills can join at any time. their own process. Full program participation Dr Basha Nazir at Pira International, Randalls
Polymers and trash fixatives play a vital involves practical work with their own system Rd. Leatherhead, Surrey, KT22 7RU, United
role in determining the productivity of a paper eg furnish evaluation. The cost of core Kingdom. Tel: [phone]
machine but with current technology it is participation is USD8 900 (AUD 13 900) while Fax: [phone] or
difficult to know whether the best chemicals, full program participation is costed according E-mail [email protected]
of Specie! Articles—Volume a4
1998 Appita L.R. Benjamin Medal An integrated approach to high yield high quality eucalypt wood
fibre: conventional breeding, biotechnology and clonal forestry
1998 Oertel Nadebaum Distinguished Service Award
Winding force — a universal tool in new winding technology
Open Letter from Appita President, Dr Bob Allison
ISO 9000:2000 — It’s not just your computer system that will
Odour assessment at the Tasman kraft mill
PAGE LOG VSI CONN ANE eos ccccccetacencdlatpeaoasveteg iueasd nseassednuaeeeeeee s 260
Precision winder alignment leads to increased productivity
Implications of carbon accounting methods for harvested wood
High speed full CD profile measurement and control for the products in New Zealand
SMS MERA UIMD WUE GINGo os .55a<s:c2casacsshschasatsapnsvssdenscaccoshenvccscsedeovasesscasce 18 Financial Report
Growing eucalypt for high-quality papermaking fibres Mill optimisation programs
Options and implications of the study for odour emissions study Kraft mill lime kiln — a greenhouse gas emitter? ............c cece 339
at Tasman
Strategies for implementing FIRESS
The role of the black liquor recovery boiler in the closure
Sustainable energy report
of chemical cycles in the pulp mill
Enzymatic processing for pulp and paper manufacture —
Measurement and control of noise at a paper mill site a review
Appita L.R. Benjamin Fiftieth Anniversary Scholarship Report
Appita Journal Vol. 52 No. 6
Appita €Conferene
12th Fundamental research symposium series, each session will start with a review send a 1000 word abstract to Program
17 - 21 September 2001 paper presented by a leading scientist from Secretary, James Brander, for consideration
Oxford, United Kingdom around the world. Speakers at this symposium by the program committee, by 30 September
include Prof. J-C Roux, Prof. A Blanco, Prof.
2000. The address for abstracts is Arjo
The title for the twelfth fundamental research B Norman, Dr W Sampson, Dr M Karlsson,
symposium, to be held at Keble College Oxford Dr P Gane, Dr R Crotogino and Dr M Waller. Wiggins R&D Ltd, Butler's Court, Wattleton
in September 2001, will be The Science of Papers are now being sought to complement Road, Beaconsfield, Bucks, HP9 1RT:
Papermaking. As at earlier symposia in this these review papers. Potential authors should E-mail [email protected]
Programs
Under the title /mproving process efficiency addition points and flow rates are really set up to the degree of involvement. Mills interested
through the selection of polymers and control or not. This program provides evaluation of in joining, receive a presentation from the
of additions, Pira International has launched a the available sensor and polymer technologies program leaders before deciding on the extent,
research program to help newsprint and fine and guidance in selecting the technologies if any, of their involvement. Cost savings
paper mills improve productivity by upgrading that suit the process. Participation may be resulting from participation can be expected in
measurement and control of their wet-end at two levels, core or full program. Core the areas of drainage, machine speed, breaks,
chemistry. Running for twelve months the participation is for mills that want to share paper quality, polymer costs and losses to
program started in September 1999 with nine the knowledge and understanding that comes effluent etc.
European and North American mills from the program without the need to include Full details can be obtained from
participating but mills can join at any time. their own process. Full program participation Dr Basha Nazir at Pira International, Randalls
Polymers and trash fixatives play a vital involves practical work with their own system Rd. Leatherhead, Surrey, KT22 7RU, United
role in determining the productivity of a paper eg furnish evaluation. The cost of core Kingdom. Tel: [phone]
machine but with current technology it is participation is USD8 900 (AUD 13 900) while Fax: [phone] or
difficult to know whether the best chemicals, full program participation is costed according E-mail [email protected]
of Specie! Articles—Volume a4
1998 Appita L.R. Benjamin Medal An integrated approach to high yield high quality eucalypt wood
fibre: conventional breeding, biotechnology and clonal forestry
1998 Oertel Nadebaum Distinguished Service Award
Winding force — a universal tool in new winding technology
Open Letter from Appita President, Dr Bob Allison
ISO 9000:2000 — It’s not just your computer system that will
Odour assessment at the Tasman kraft mill
PAGE LOG VSI CONN ANE eos ccccccetacencdlatpeaoasveteg iueasd nseassednuaeeeeeee s 260
Precision winder alignment leads to increased productivity
Implications of carbon accounting methods for harvested wood
High speed full CD profile measurement and control for the products in New Zealand
SMS MERA UIMD WUE GINGo os .55a<s:c2casacsshschasatsapnsvssdenscaccoshenvccscsedeovasesscasce 18 Financial Report
Growing eucalypt for high-quality papermaking fibres Mill optimisation programs
Options and implications of the study for odour emissions study Kraft mill lime kiln — a greenhouse gas emitter? ............c cece 339
at Tasman
Strategies for implementing FIRESS
The role of the black liquor recovery boiler in the closure
Sustainable energy report
of chemical cycles in the pulp mill
Enzymatic processing for pulp and paper manufacture —
Measurement and control of noise at a paper mill site a review
Appita L.R. Benjamin Fiftieth Anniversary Scholarship Report
Appita Journal Vol. 52 No. 6
of Authors—Volume 52 Appita
Allison, Robert, W., Timonen, Olli, McGrouther, Kim, G. and Evtuguin, Dmitry — see Silvestre, Armando J.D.
Suckling, lan, D. —- Hexenuronic acid in kraft pulps from
Ferguson, lan, S. and Johnston, Robert, E. — Fibre supply models
radiata pine
for the Australian and New Zealand paper industry
Almeida, José M. — see Colodette, Jorge L.
Furtado, Fernanda P. — see Silvestre, Armando J.D.
Argyropoulos, Dimitris S. — Colodette, Jorge L. Gibbons, Stuart — see Xido, Huining
Batchelor, Warren J. — see Conn, Andrew B. Gielen, Gerty J. — see Wang, Hailong
Batchelor, Warren J. — see Wu, Ziqi Gomide, José L. — see Colodette, Jorge L.
Belino, Edito — see Neto, Carlos Pascoal Gonzales, Enrique — see Law, Kwei-Nam
Blackwell, Bridget G. — see Wang, Hailong Gureyev, Timur, E. and Evans, Robert — A new method for
Bourdelin, Michael — see Rao, Rhitu rapid measurement of vessel-free density distribution
Bremford, David, J. and Miiller-Steinhagen, Hans, M. — in hardwoods
Multiple-effect evaporator performance for black liquor — Hanninen, Elisa — see Koskiniemi, Juha
Part Ill: The effects of fouling on evaporator performance Helmer, Richard, J.N., Covey, Geoffrey, H. and Lai, Lester, C.-Y. -
Burwood, Richard — see Tarnopolskaya, Tanya Laboratory study of co-axial stock mixing
Cavaleiro, José A.S. — see Silvestre, Armando J.D. Hughes, Murray — see Evans, Robert
Clark, Noel, B., Read, Stephen, M. and Vinden, Peter - Jensen, Anthony, A.C. — see Richardson, John D.
Effects of drought and salinity on wood and kraft pulps Jiang, Chongjun — see Tarnopolskaya, Tanya
from young plantation eucalypts
Johansson, Bjorn and Strom, Goran —
Clark, Noel, B. and Rawlins, William, H.M. — Prospects for Floatability of model offset ink
pulpwood from the Murray Darling Basin
Jones, Trevor, G. and Richardson, John, D. — Relationships
Colodette, Jorge, L., Gomide, José, L., Argyropoulos, Dimitris, S., between wood and chemimechanical pulping properties
Robles, Yoni, A.M., Almeida, José, M., Mehiman, Stewart, K of New Zealand grown Eucalyptus nitens trees
and deBrito, Ana, G.H. — Effect of pulping processes on
Johnston, Robert E. — see Ferguson, lan S.
bleachability with ECF, Z-ECF and TCF bleaching
Johnston, Robert E. — see Wu, Zigi
Conn, Andrew, B. and Batchelor, Warren, J. — Conversion of an
Judd, Maurice L. — see Wang, Hailong
Instron to mechanical testing of single fibres
Kibbiewhite, R. Paul and McKenzie, Chris, J. — Kraft fibre property
Cordeiro, Darrell — see Tarnopolskaya, Tanya
variation among 29 trees of 15 year old Eucalpytus fastigata
Corson, Stuart, R. — Tree and fibre selection for optimal TMP
and comparison with £. nitens
Kibbiewhite, R. Paul and Wong, Ken, K.Y. — Modification
Covey, Geoffrey, H, Creasy, Dennis, E., Elliot, Ashley, D and Phan,
of a commercial radiata pine kraft pulp using carbohydrate
Hung, Q. — Crystallization of sodium carbonate from green
degrading enzymes
liquor by cooling
Kibblewhite, R. Paul — Designer fibres for improved papers through
Covey, Geoffrey H. — see Helmer, Richard J.N.
exploiting genetic variation in wood microstructure
Creasy, Dennis E. — see Covey, Geoffrey H.
Kibblewhite, R. Paul — see Evans, Robert
deBrito, Ana G.H. — see Colodette, Jorge L.
Kibblewhite, R. Paul — see Riddell, Mark J.C.
Duarte, Armando C. — see Silvestre, Armando J.D.
Koskiniemi, Juha, Vakkilainen, Esa, Paju, Raimo and Hanninen, Elisa —
Duggirala, Prasad, Y. — Evaluation of surfactant technology Removal of chlorides from chemical circulation in the kraft pulp
for bleachable and high yield hardwood kraft pulps
Elliot, Ashley D. — see Covey, Geoffrey, H. Lai, Lester C.-Y. — see Helmer, Richard J.N.
Evans, Robert, Kibblewhite, R. Paul and Lausberg, Marco - Laine, Janne — see Luukko, Kari
Relationships between wood and pulp properties of
Lausberg, Marco — see Evans, Robert
twenty-five 13 year old radiata pine trees
Law, Kwei-Nam, Valade, Jacques, L. and Gonzales, Enrique -
Evans, Robert — A variance approach to the X-ray diffractometric
Response of jack pine chemimechanical pulp to PFI mill
estimation of microfibril angle in wood
beating
Evans, Robert, Hughes, Murray and Menz, David — Microfibril
Lloyd, Mike, D. and Norman, Bo — Use of stepped vanes to
angle variation by scanning X-ray diffractometry
alter headbox turbulence levels during stratified forming
Evans, Robert — see Gureyev, Timur E. of woodfree paper
Evans, Robert — see Nyakuengama, John G. Luukko, Kari, Laine, Janne and Pere, Jaakko — Chemical
Evtuguin, Dmitry — see Neto, Carlos Pascoal characterization of different mechanical pulp fines
November 1999
Appita of Authors—Volume $2
Mansfield, Shawn, D., Wong, Ken, K.Y. and Richardson, John, D. - Silvestre, Armando, J.D., Pereira, Claudia, C.L., Neto, Carlos Pascoal,
Improvements in mechanical pulp processing with proteinase Evtuguin, Dmitry, V., Duarte, Armando, C., Cavaleiro, José, A.S.
treatments... ryee a ee 436 and Furtado, Fernanda, P. — Chemical composition of pitch
Matheson, C. - see Nyakuengama, John G. deposits from an ECF Eucalyptus globulus bleached kraft pulp
McGrouther, Kim G. — see Allison, Robert W. mill: its relationship with wood extractives and additives in
Mehiman, Stewart K. — see Colodette, Jorge L. process streams
Menz, David — see Evans, Robert Silvestre, Armando J.D. — see Neto, Carlos Pascoal
Michell, Anthony J. — see O'Neill, Philippa Spencer, D. — see Nyakuengama, John G.
McKenzie, Chris J. — Kibblewhite, R. Paul Stenius, Per — see Rao, Rhitu
Mohiddin, Sayyad — see O'Neill, Philippa Strom, Goran — see Johansson, Bjérn
Morgan, Dexter, G. — Linerboard fines — effects and composition.....441
Stuthridge, Trevor R. — see Wang, Hailong
Muller-Steinhagen, Hans M. — see Bremford, David J.
Suckling, lan D. — see Allison, Robert W.
Neto, Carlos Pascoal, Belino, Edito, Evtuguin, Dmitry and
Sun, Yan Ping — Kraft bleach plant ECF conversion: Comparison
Silvestre, Armando, J.D. — Total fractionation and analysis
of sequences involving enzymes, chlorine dioxide, oxygen and
of organic components of industrial Eucalyptus globulus
kraft black liquor hydrogen peroxide
Neto, Carlos Pascoal — see Silvestre, Armando J.D. Tarnopolskaya, Tanya, Burwood, Richard, Cordeiro, Darrell
Norman, Bo — see Lloyd, Mike D. and Jiang, Chongjun — Modelling of water removal by
vacuum suction
Nyakuengama, John, G., Evans, Robert, Matheson, C.,
Spencer, D. and Vinden, Peter - Wood quality and Timonen, Olli — see Allison, Robert W.
quantitative genetics of Pinus radiata D. Don: fibre traits
Tomer, Mark D. — see Wang, Hailong
and wood density
Vakkilainen, Esa — see Koskiniemi, Juha
O'Neill, Philippa, Mohiddin, Sayyad and Michel, Anthony, J. -
Valade, Jacques L. — see Law, Kwei-Nam
Exploring data for relationships between wood, fibre and
USA CEC2E (1 ng 358 Vinden, Peter — see Clark, Noel B.
Orccotoma, José Antonio, Paris, Jean and Perrier, Michel — Vinden, Peter — see Nyakuengama, John G.
Dynamic analysis of fibrous material and dissolved solids
Waller, Andrew — see Richardson, John D.
distribution in the wet-end of a newsprint mill
Wallis, Adrian, FA. and Wearne, Ross, H. — Analysis of resin
Ovenden, Cherie — see Xiao, Huining
in eucalypt woods and pulps
Paju, Raimo — see Koskiniemi, Juha
Wang, Hailong, Gielen, Gerty, J., Judd, Maurice, L., Stuthridge,
Paris, Jean — see Orccotoma, José Antonio
Trevor, R., Blackwell, Bridget, G., Tomer, Mark, D. and Pearce,
Parker, lan — see Xu, Li
Stephen, H. — Treatment efficiency of land application for
Pearce, Stephen H. — see Wang, Hailong
thermomechanical pulp mill effluent constitutents
Pere, Jaakko — see Luukko, Kari
Wearne, Ross H. — see Wallis, Adrian F.A.
Pereira, Claudia C.L. — see Silvestre, Armando J.D.
Wiseman, Nicholas — see Xiao, Huining
Perrier, Michel — see Orccotoma, José Antonio
Wong, Ken K.Y. — see Kibblewhite, R. Paul
Phan, Hung Q. — see Covey, Geoffrey, H.
Wong, Ken K.Y. — see Mansfield, Shawn D.
Rao, Rhitu, Bourdelin, Michael and Stenius, Per —
The influence of surfactant structure on ink detachment Wu, Zigu, Batchelor, Warren, J. and Johnston, Robert, E. —
Rawlins, Williams H.M. — see Clark, Noel B. Development of an impedance method to measure the
moisture content of a wet paper web
Read, Stephen M. — see Clark, Noel B.
Richardson, John D., Waller, Andrew and Jensen, Anthony, A.C. - Xiao, Huining, Gibbons, Stuart, Ovenden, Cherie and Wiseman,
Developing pressurized refiner mechanical pulping for the Nicholas — Clay retention induced by poly (ethylene oxide)
Tasman pulp and paper mill with various cofactors
Richardson, John D. — see Jones, Trevor G. Xu, Eric, C. — Properties and papermaking potential of alkaline
Richardson, John D. — see Mansfield, Shawn D. peroxide mechanical pulp from Acacia mangium
Riddell, Mark, J.C. and Kibblewhite, R. Paul — Variation in test Xu, Li and Parker, lan — Correction of fluorescence attenuation
results for kraft pulp wood chip evaluations with depth in fibre and paper images collected by confocal
Robles, Yoni A.M. — see Colodette, Jorge L. laser Scanning microscopy
478