Advances in Materials Sciences, Energy and Environmental Engineering: Proceedings of the International Conference on Materials Science, Energy ... MSETEE 2016, Zhuhai, China, May 28-29, 2016

473 Pages·2016·13.218 MB·English

by  Aragona Patty, Zhou Peijiang

ADVANCES IN MATERIALS SCIENCE, ENERGY TECHNOLOGY
AND ENVIRONMENTAL ENGINEERING
MMSSEETTEEEE__BBooookk..iinnddbb ii 1100//1133//22001166 1111::3366::0088 AAMM
MMSSEETTEEEE__BBooookk..iinnddbb iiii 1100//1133//22001166 1111::3366::0088 AAMM
PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE, ENERGY
TECHNOLOGY AND ENVIRONMENTAL ENGINEERING (MSETEE 2016), ZHUHAI, CHINA,
28–29 MAY 2016
Advances in Materials Science, Energy
Technology and Environmental
Engineering
Editors
Aragona Patty
Institute of Applied Industrial Technology Division, Portland Community College,
Portland, OR, USA
Peijiang Zhou
School of Resource and Environmental Sciences, Wuhan University, Hubei, China
MMSSEETTEEEE__BBooookk..iinnddbb iiiiii 1100//1133//22001166 1111::3366::0088 AAMM
CRC Press/Balkema is an imprint of the Taylor & Francis Group, an informa business
© 2017 Taylor & Francis Group, London, UK
Typeset by V Publishing Solutions Pvt Ltd., Chennai, India
All rights reserved. No part of this publication or the information contained herein may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
by photocopying, recording or otherwise, without written prior permission from the publisher.
Although all care is taken to ensure integrity and the quality of this publication and the information
herein, no responsibility is assumed by the publishers nor the author for any damage to the property or
persons as a result of operation or use of this publication and/or the information contained herein.
Published by: CRC Press/Balkema
P.O. Box 11320, 2301 EH Leiden, The Netherlands
e-mail: [email protected]
www.crcpress.com – www.taylorandfrancis.com
ISBN: 978-1-138-19668-1 (Hbk)
ISBN: 978-1-315-22704-7 (eBook)
MMSSEETTEEEE__BBooookk..iinnddbb iivv 1100//1133//22001166 1111::3366::0088 AAMM
Advances in Materials Science, Energy Technology
and Environmental Engineering – Patty & Zhou (Eds)
© 2017 Taylor & Francis Group, London, ISBN 978-1-138-19668-1
Table of contents
Preface xi
Organizing committees xiii
Electrical and electronic engineering
Research on the friction vibration feature extraction based on the norm-coupling method
in a running-in process 3
T. Liu, G.B. Li & H.J. Wei
Fault diagnosis of a converter transformer based on the FOA-LSSVM 9
Y. Sun, Q. Long, G. Lv, D.K. Huang, Y. Li & Y.P. Fan
Study of the milling experiment and cutting parameter optimization of HT250 13
Y.L. Wang, S. Li, Y. Zhang & S.Z. Li
Light exoskeleton for civil use: A pragmatic carrying assistive apparatus 17
P.Z. Zhu & F.L. Han
Screw extruder control system design and simulation using MATLAB 27
Y.L. Gao, L. Wang & J.L. Zheng
Study on the optimizing design of a screw extruder system 31
Y.L. Gao, L. Wang & J.L. Zheng
Constant speed control system of a test-bed for a hydraulic energy recovery turbine 35
G.Q. Yang
Isolated RS485 communication interface for the metal working fluids
monitoring system 41
T. Škulavík & K. Gerulová
Theoretical modeling and simulation analysis of ultra-precision turning
of ZnSe crystals 47
S.P. Li, Y. Zhang, Q.M. Xie & W.Q. Zhang
Site-preference effects in proton conductors of BaCe Eu O 55
1-X X 3-δ
J.X. Wang, L.F. Lai, J.W. Jian & F.A. Li
Parameter analysis of the spiral generator of rotary stream for sand reclamation equipment
based on FLUENT 59
W.L. Lu, S. Li & Q. Chen
Designing of an adjustment device for a semi-feeding peanut picking roller 63
X.R. Lv, X.L. Lv, X.Q. Zhang & W. Wang
Research on an intelligent algorithm diagnosis system 67
B.M. Chen, X.P. Fan, X.R. Li, H.W. Zhou & Z.M. Zhou
Image restoration based on structure and texture decomposition 71
Q. Zhang, M.F. Shen & B. Li
Preparing the FE model update of a rolling stock car body under servicing conditions based
on profile plate equivalence 77
X.J. Deng, Q. Li & Y.J. Zhao
v
MMSSEETTEEEE__BBooookk..iinnddbb vv 1100//1133//22001166 1111::3366::0088 AAMM
Description of the spatial effect of ground motion on multi-support excitation 83
B.C. Yu & J.S. Wang
Study on the development process of a vehicle chassis 87
L.X. Jing, L.G. Wu, F. Li & M.H. Liu
Study on the thermal expansion coefficient of athermalization infrared lens’ thermal
compensation element 93
F. Zhu, Y. Zhang & Z.W. Wang
Study on the dynamics of the electronic equipment in a self-propelled artillery system 99
J. Gao, B. Li, S.X. Wang, Q. Wang & S. Li
Bending testing apparatus with a welding plate 103
C.J. Li, H. Zhao, H.R. Wang, S.J. Su & J.T. Liu
An inexact smoothing Newton algorithm for NCP based on a new smoothing
approximation function 107
C.L. Shang, Z.Y. Tian & L. Liu
Research on measuring method for the groove parameters of the shaft washer of steering bearing 113
Z.Z. He, J.H. Wu & X.N. Lu
A self-adaptive density re-initialization method for SPH techniques 119
S. Chai, G.P. Miao & Y. Yang
Design and analysis of an EDM machine tool 125
Y. Li & S.F. Wang
Plasma etching fabrication and graphene lubrication of IRBRR based on a multi-wafer MEMS 131
H. Liu, Y.J. Cheng & S.S. Wang
Research on the real-time scheduling strategy of a sensor layer node in CPS 137
B.H. Zhou, L.M. Liu & L.B. Xu
Fault early warning of a wind turbine pitch system based on the least square method 141
J.P. Yang, W.Y. Yao & J.M. Wang
Research on the swirling flow effect of the combustor–turbine interaction on vane film cooling 145
S. Liu & H. Yin
Adsorption isotherms of aliphatic-based superplasticizer in CFBC ash-Portland cement paste 157
J.X. Liu, L.T. Ma, H.Y. Wang, J.W. Liu, J.Y. Yan & Y.Y. Wang
Energy science and environmental engineering
Situation division for the high-temperature zone based on the utility function 163
X.F. Ma
Network security risk assessment model based on temperature 167
Y.P. Jiang, C.C. Cao, X. Mei & H. Guo
Influencing factors analysis of the testing system for the fire detection and fire alarm system 173
T.T. Wang
Study on differential games for discrete-time stochastic control systems with Markov jump
and multiplicative noise 177
Y.L. Liu, M. Li & S.M. Ge
A testifying method for the instructing efficiency of information security courses
with statistical probability models 185
X.M. Jia
Influence of the shear retention factor on the fracture behavior of fiber reinforced concrete 189
X.Y. Zhang & D. Wang
Study on primary recrystallisation annealing of 3% Si low temperature nitriding HiB steel 193
J.W. Gao, G. Zhao, G. Tang, Y. Xu & T. Xiong
vi
MMSSEETTEEEE__BBooookk..iinnddbb vvii 1100//1133//22001166 1111::3366::0088 AAMM
Research and application of e-waste resourcing LCSA model 197
Q.L. Han & C.X. Zhu
Influence of particle size on seepage of water and sediment in fractured rock 203
Y. Liu, X. Zhang, J. Bai, X.L. Cai & Z.H. Si
Establishment of an evaluation system of “green level” of scale inhibitors for water
treatment 209
L. Zhu, N. Wang & L.M. Sun
Effects of leaf area and biomass on different seasons for individual eucalyptus trees 213
X.P. Cheng, L.Q. Dong & S.H. Wang
Study on the coal seam gas migration law with numerical simulation under the condition
of extraction 217
G. Xu & C. Liu
Effect of rotational excitation on the reaction Li + DF(v = 0, j = 0 – 5) 223
X.F. Yue
Thermal simulation and analysis of high-power white LED light 227
Y.Z. Zhang, C.X. Li, Y. Wang & L.L. Ran
Optimization of the blending process for ABS/PMMA/EMA via response
surface methodology 231
J. Ding, Z.M. Yue, J. Sun & J. Gao
Enhanced synchronous treatment of wastewater and solid pollution by hydrolysis
acidification technology 239
Y.Y. Zhang & J.H. Cui
An evaluation model of soft foundation treatment based on the analytic hierarchy process
and gray theory 243
Y.L. Liu, X. Fu, X.L. Liu & L.G. Bai
Research on biotrickling filters for wastewater and odor treatment 247
J.H. Cui & Y.Y. Zhang
Diffraction imaging based on the plane-wave record 251
X. Kong, Y. Teng, X. Zhang & Y.Y. Shi
Screening of fosfomycin-degrading bacteria and its practical application in the CASS 257
S.Y. Liu, L.F. Zhao & W.C. Zhao
Regulations on low sulfur and revisions of marine fuel oil Standard GB/T 17411-2012 261
S. Ye & W.W. Feng
Flexible nanoimprint mold based on a commercial SEBS thermoplastic elastomer 265
H.T. Chen, D. Trefilov, Y.S. Cui, C.S. Yuan, H.X. Ge, X. Hu & B. Cui
Construction of an urban water source management system and application of phenol
paroxysmal pollution 271
X.L. Meng, X.Q. Ye, L. Zhang & J.H. Qu
Harvesting of microalgae Chlorella pyrenoidosa cultivated in municipal wastewater
by electroflocculation 275
R.J. Tu, W.B. Jin, S.F. Han & W. Jiang
Economic and environmental benefit analysis of energy performance contracting
for a solar hot water system in Chinese universities 281
H.T. Yuan, K. Yang, X.T. Yan, Q. Li, H. Guo, T. Mwamulima & C.S. Peng
Enhancement of the lipid production of Scenedesmus obliquus cultivated in municipal
wastewater by light optimization outdoors 287
S.F. Han, W.B. Jin, R.J. Tu & X.Y. Wang
High Cu sedimentation locations in the Jiaozhou Bay 291
D.F. Yang, H.Z. He, F.Y. Wang, S.X. Zhu & M. Wang
vii
MMSSEETTEEEE__BBooookk..iinnddbb vviiii 1100//1133//22001166 1111::3366::0088 AAMM
Seasonal variations of Pb sources in the Jiaozhou Bay during 1979–1983 295
D.F. Yang, D.F. Yang, Y.J. Zhang, X.C. Qu & Y. Chen
Spatial-temporal variations of Pb sources in the Jiaozhou Bay during 1979–1983 299
D.F. Yang, Y.J. Zhang, X.C. Qu, D.F. Yang & Y. Chen
Materials science and materials processing
Study on the surface roughness prediction model of TC4 titanium alloy 305
M.M. Hu, Y. Zhang & S.W. Yuan
Observation of a nickel aluminum bronze corrosion morphology 311
Z.H. Chen, X.F. Sun & Y.L. Huang
Effect of deposition conditions on electrical properties of NiCr thin film 315
L.F. Lai, J.X. Wang & Y.N. Qiu
Research on the cutting deformation of TC4 titanium alloy with simulation
and experimental 319
F. Kang, C.K. Hu, J. Lin, X.S. Xia & Y.B. Wang
Assessment of zirconium species distributions in Zr-F-H aqueous solution based
on thermodynamics 323
D.W. Mi & C.Z. Yang
Performance of piperazine-urea-N-(2-hydroxyethyl) piperazine ternary system
on simultaneous desulfurization and denitration 327
M. Jin, G.X. Yu & P. Lu
The antioxidant activitives and application of miracle fruit leaves 333
Y.-G. Liu, X.-M. Zhang, F.-Y. Ma & Q. Fu
Comparison of the determination methods for total flavonoids in Manilkara zapota leaves 337
H.F. Chen, Q. Fu, X.M. Zhang, Y.G. Liu & F.Y. Ma
Classification and progress of emergency cutting technology based on energetic materials 341
W.-T. Xin, Y.-H. Liu, L.-M. Sun & X.-M. Cui
Studies on the HPLC fingerprint of a methanolic extract of Schisandra chinensis 347
J. Bai
Effect of rosemary extracts on the antimicrobial activity and quality of minced pork
during refrigerated storage 351
Y.F. Wang, H. Wang, E.B. Hua, Z.O. Sun, H.L. Wang & H. Wang
Research advances in sorghum awn traits 361
C.M. Bai, C.G. Tao, X.C. Lu, Y.F. Liu & L.J. Zhang
Experimental study on the mechanical behavior of strain hardening cementitious composites
using local ingredients 365
Z.H. Li, W.K. Chen, X. Zhou & F.Q. Chen
Characteristics of red pitaya wine fermented by different yeast strains 371
J.W. Yin, Y.J. Li, S.J. Li, X.F. Wang, X. Gong, Y.Y. Liu, L.J. Lin & J.H. Li
Effect of translation energy on the reaction N(2D) + D(v = 0, j = 0) 375
2
X.F. Yue
Adsorption properties of modified powdered activated carbon on salicylic
acid wastewater 379
X. Tan, B. Liu, W. Hong, G.F. Chang & X.F. Zou
Product remanufacturability evaluation based on the theory of LCC 383
Q.L. Han & B. Hu
Structure-dependent mechanical property of carbon nanotube fibers 389
J.D. Zhu
viii
MMSSEETTEEEE__BBooookk..iinnddbb vviiiiii 1100//1133//22001166 1111::3366::0088 AAMM
In-situ DRIFTS study on photocatalytic reduction of CO over CuO-P25 composites 393
2 2
C.Y. Yan, W.T. Yi, J. Xiong & J. Ma
Influence of TiO on drag reduction and shear degradation resistance of polyolefin in diesel 397
2
X.D. Dai, H.R. Liu, Y.Z. Zhang & J.M. Li
Adsorption of aqueous heavy metal ions by a poly(m-phenylenediamine)/attapulgite composite 401
Y.B. Ding, J.J. Wang & Y.C. Xu
Effect of Mg content on the microstructure and properties of a Zn-Al-Mg alloy 405
X.D. Hao, C.F. Yue, S.M. Jiang, Q.F. Zhang, Y.N. Bai & L.J. Li
Beam manipulation by a slit film structure containing metal/dielectric composite materials 409
K. Zhang & Z.J. Wang
Discussion on the mineralogical characteristics and formation causes of Lizhu iron polymetallic
ore deposits in Zhejiang Province 413
D.L. Jia, Y.F. Feng, W.Y. Zhang, X.F. Yao, Y.S. Li & Z.H. Zhang
Effects of biochar pyrolysis temperature on its characteristics and heavy metal adsorption 419
L.F. Zhao, Q.S. Liu, S.Y. Liu, W.C. Zhao, H.M. Li & B. Han
A hierarchical analysis of performances of powder extinguishing agents 423
S. Wang
The exploration and control methods of mine dust particles 427
Z.T. Xu, J.Y. Wang & M.X. Han
Comprehensive treatment of wastewater derived from enzymatic preparation of l-methionine 431
Y. Mei, C. Hu & J. Zhang
Synthesis of an ESA/AMPS copolymer and evaluation of its scale inhibition performance 435
Z.F. Liu, Y.L. Xu, L.H. Zhang, H.H. Li & Y.H. Gao
Research on a new polyepoxysuccinic acid copolymer 439
Y.L. Xu, Z.F. Liu, L.H. Zhang, H.H. Li & Y.H. Gao
High-performance and low-cost SERS substrate on a flexible plastic sheet 443
Q. Zhang, L. Liu & H.X. Ge
Studies on novel multiferroic materials 449
D.Y. Wei
Theoretical analysis of the separation of water load magnetic particles in a high-gradient
magnetic field 453
Z.M. Zhu, J.X. Cheng, Y.P. Wu, C.N. Wang, F.T. Zhao, W.W. Wen & J.X. Cheng
Author index 457
ix
MMSSEETTEEEE__BBooookk..iinnddbb iixx 1100//1133//22001166 1111::3366::0088 AAMM