Advances in Acoustics and Vibration II: Proceedings of the Second International Conference on Acoustics and Vibration (ICAV2018), March 19-21, 2018, Hammamet, Tunisia

335 Pages·2019·40.011 MB·English

by  Tahar Fakhfakh, Chafik Karra, Slim Bouaziz, Fakher Chaari, Mohamed Haddar

Applied Condition Monitoring
Tahar Fakhfakh · Chafik Karra 
Slim Bouaziz · Fakher Chaari 
Editors
Mohamed Haddar
Advances in
Acoustics and
Vibration II
Proceedings of the Second International
Conference on Acoustics and Vibration
(ICAV2018), March 19–21, 2018,
Hammamet, Tunisia
Applied Condition Monitoring
Volume 13
Series editors
Mohamed Haddar, National School of Engineers of Sfax, Tunisia
Walter Bartelmus, Wrocław University of Technology, Poland
Fakher Chaari, National School of Engineers of Sfax, Tunisia
e-mail: [email protected]
Radoslaw Zimroz, Wrocław University of Technology, Poland
The book series Applied Condition Monitoring publishes the latest research and
developmentsinthefieldofconditionmonitoring,withaspecialfocusonindustrial
applications. It covers both theoretical and experimental approaches, as well as a
range of monitoring conditioning techniques and new trends and challenges in the
field. Topics of interest include, but are not limited to: vibration measurement and
analysis;infrared thermography;oilanalysisandtribology;acoustic emissionsand
ultrasonics;andmotorcurrentanalysis.Bookspublishedintheseriesdealwithroot
cause analysis, failure and degradation scenarios, proactive and predictive
techniques, and many other aspects related to condition monitoring. Applications
concern different industrial sectors: automotive engineering, power engineering,
civil engineering, geoengineering, bioengineering, etc. The series publishes
monographs, edited books, and selected conference proceedings, as well as
textbooks for advanced students.
More information about this series at http://www.springer.com/series/13418
fi
Tahar Fakhfakh Cha k Karra
(cid:129)
Slim Bouaziz Fakher Chaari
(cid:129)
Mohamed Haddar
Editors
Advances in Acoustics
and Vibration II
Proceedings of the Second International Conference
on Acoustics and Vibration (ICAV2018),
–
March 19 21, 2018, Hammamet, Tunisia
123
Editors
Tahar Fakhfakh Fakher Chaari
National School ofEngineers of Sfax National School ofEngineers of Sfax
Sfax, Tunisia Sfax, Tunisia
Chafik Karra MohamedHaddar
SfaxPreparatory Engineering Institute National School ofEngineers of Sfax
Sfax, Tunisia Sfax, Tunisia
Slim Bouaziz
Faculty of Sciences ofSfax
Sfax, Tunisia
ISSN 2363-698X ISSN 2363-6998 (electronic)
AppliedCondition Monitoring
ISBN978-3-319-94615-3 ISBN978-3-319-94616-0 (eBook)
https://doi.org/10.1007/978-3-319-94616-0
LibraryofCongressControlNumber:2016944485
©SpringerNatureSwitzerlandAG2019
Thisworkissubjecttocopyright.AllrightsarereservedbythePublisher,whetherthewholeorpart
of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations,
recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission
orinformationstorageandretrieval,electronicadaptation,computersoftware,orbysimilarordissimilar
methodologynowknownorhereafterdeveloped.
The use of general descriptive names, registered names, trademarks, service marks, etc. in this
publicationdoesnotimply,evenintheabsenceofaspecificstatement,thatsuchnamesareexemptfrom
therelevantprotectivelawsandregulationsandthereforefreeforgeneraluse.
The publisher, the authors and the editors are safe to assume that the advice and information in this
book are believed to be true and accurate at the date of publication. Neither the publisher nor the
authorsortheeditorsgiveawarranty,expressorimplied,withrespecttothematerialcontainedhereinor
for any errors or omissions that may have been made. The publisher remains neutral with regard to
jurisdictionalclaimsinpublishedmapsandinstitutionalaffiliations.
ThisSpringerimprintispublishedbytheregisteredcompanySpringerNatureSwitzerlandAG
Theregisteredcompanyaddressis:Gewerbestrasse11,6330Cham,Switzerland
Preface
The Second International Conference on Acoustics and Vibration (ICAV’2018)
was held at Hammamet, Tunisia, from 19 to 21 March 2018. ICAV’2018 aims to
collect the broadest range of high-level contributions, covering theoretical and
practical case studies in all the fields of acoustics and vibration. After a successful
firsteditionin2016publishedunderACMbookseries,theTunisianAssociationof
Industrial Acoustics and Vibration which is the organizer of this conference con-
tinuestopromotecommunicationandcollaborationbetweeninternationalandlocal
communitiesinvolvedinthefieldsofacousticsandvibration.Thebookcontains33
chapters issued from the presentation done by eminent scientists which were
rigourously peer reviewed. About 100 attendees discussed several topics such as:
(cid:129) Dynamics and vibration of structures and machinery,
(cid:129) Fault diagnosis and prognosis,
(cid:129) Fluid–structure interaction and vibroacoustics,
(cid:129) Nonlinear dynamics,
(cid:129) Modelling and simulation,
(cid:129) Computational vibroacoustics/numerical techniques,
(cid:129) Material behaviour in dynamics.
According to the several topics discussed during the conference, the book
is divided into four parts.
Part 1—Dynamics and fault detection of machinery
Part 2—Multiphysics system dynamics
Part 3—Structure dynamics and fluid–structure interaction
Part 4—Material behaviour in dynamic systems
v
vi Preface
We would like to thank the organizing committee, scientific committee and all
participants coming from Tunisia, Algeria, France, Saudi Arabia, Spain and
Portugal. Thanks to Springer for continuous support of ICAV2018.
March 2018 Tahar Fakhfakh
Chafik Karra
Slim Bouaziz
Fakher Chaari
Mohamed Haddar
Contents
Dynamics and Fault Detection of Machinery
L-Kurtosis and Improved Complete Ensemble EMD in Early
Fault Detection Under Variable Load and Speed. . . . . . . . . . . . . . . . . . 3
Hafida Mahgoun, Fakher Chaari, Ahmed Felkaoui,
and Mohamed Haddar
Dynamic Behavior of Back to Back Planetary Gear in Presence
of Pitting Defects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Ayoub Mbarek, Alfonso Fernandez Del Rincon, Ahmed Hammami,
Miguel Iglesias, Fakher Chaari, Fernando Viadero Rueda,
and Mohamed Haddar
Losses in Thrust Ball Bearings Lubricated with Axle Gear Oils . . . . . . 23
Maroua Hammami, Mohamed Slim Abbes, Ramiro Martins,
Jorge H. O. Seabra, and Mohamed Haddar
Dynamic Behavior and Stability of a Flexible Rotor . . . . . . . . . . . . . . . 37
Abdelouahab Rezaiguia, Oussama Zerti, Salah Guenfoud,
and Debra F. Laefer
Operational Modal Analysis for a Half Vehicle Model. . . . . . . . . . . . . . 51
Dorra Ben Hassen, Mariem Miladi, Mohamed Slim Abbes,
S. Caglar Baslamisli, Fakher Chaari, and Mohamed Haddar
Detecting Sound Hard Cracks in Isotropic Inhomogeneities. . . . . . . . . . 61
Lorenzo Audibert, Lucas Chesnel, Houssem Haddar, and Kevish Napal
On the Research of Extra Characteristic Frequencies
in a Planetary Gearbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Oussama Graja, Bacem Zghal, Kajetan Dziedziech, Fakher Chaari,
Adam Jablonski, Tomasz Barszcz, and Mohamed Haddar
vii
viii Contents
Mutiphysics Systems Dynamics
Analytical Based Approach for Vibration Analysis in Modelica:
Application to the Bridge Crane System . . . . . . . . . . . . . . . . . . . . . . . . 83
Ghazoi Hamza, Moncef Hammadi, Maher Barkallah, Jean-Yves Choley,
Alain Riviere, Jamel Louati, and Mohamed Haddar
Dynamic Relaxation Coordination Based Collaborative
Optimization for Optimal Design of Multi-physics Systems . . . . . . . . . . 92
Hamda Chagraoui and Mohamed Soula
Electro-Mechanical System Control Based on Observers . . . . . . . . . . . . 101
Syrine Derbel, Nabih Feki, Jean Pierre Barbot, Florentina Nicolau,
Mohamed Slim Abbes, and Mohamed Haddar
The Design and Modeling of an Optimized Mechatronic System
Using a Set Based Concurrent Engineering . . . . . . . . . . . . . . . . . . . . . . 111
Randa Ammar, Moncef Hammadi, Jean-Yves Choley, Maher Barkallah,
Jamel Louati, and Mohamed Haddar
Vibration Energy Localization from Nonlinear Quasi-Periodic
Coupled Magnets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Zakaria Zergoune, Najib Kacem, and Noureddine Bouhaddi
A Numerical Parametric Analysis for the Distribution of Fins
Using Phase Change Material (PCM). . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Ahmed Guerine and Abdelkhalak El Hami
Sensitivity Analysis of Frequency Response Functions for Load
Resistance of Piezoelectric Energy Harvesters . . . . . . . . . . . . . . . . . . . . 136
Rabie Aloui, Walid Larbi, and Mnaouar Chouchane
Effect of Harmonic Excitation on PCB and Component Assembly. . . . . 149
Ayda Halouani, Mariem Miladi Chaabane, Mohamed Haddar,
and Abel Cherouat
Structures Dynamics and Fluid-Structure Interaction
Alternative Design Strategy for Water-Hammer Control
in Pressurized-Pipe Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
Mohamed Fersi and Ali Triki
Parametric Study on the Efficiency of an Inverse Energetic
Approach to Identify the Boundary Acoustic Sources . . . . . . . . . . . . . . 166
Ahmed Samet, Mohamed Amine Ben Souf, Olivier Bareille,
Tahar Fakhfakh, Mohamed Ichchou, and Mohamed Haddar
Statistical Investigations of Uncertainty Impact on Experiment-Based
Identification of a Honeycomb Sandwich Beam . . . . . . . . . . . . . . . . . . . 176
Ramzi Lajili, Khaoula Chikhaoui, and Mohamed Lamjed Bouazizi
Contents ix
Characterization of the Mechanical and Vibration Behavior of Flax
Composites with an Interleaved Natural Viscoelastic Layer. . . . . . . . . . 186
Daoud Hajer, El Mahi Abderrahim, Rebiere Jean-Luc,
Taktak Mohamed, and Haddar Mohamed
Experimental and Numerical Analysis of Sound Transmission
Loss Through Double Glazing Windows . . . . . . . . . . . . . . . . . . . . . . . . 195
Chaima Soussi, Walid Larbi, and Jean-François Deü
Efficient Cultural Algorithm for Structural Damage Detection
Problem Based on Modal Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
Najeh Ben Guedria and Hichem Hassine
Reverse Engineering Techniques for Investigating
the Vibro-Acoustics of Historical Bells . . . . . . . . . . . . . . . . . . . . . . . . . . 218
Vincent Debut, Miguel Carvalho, Filipe Soares, and José Antunes
Experimental Investigation of Normal/Lateral Excitation Direction
Influence on the Dynamic Characteristics of Metal Mesh Isolator . . . . . 227
Fares Mezghani, Alfonso Fernandez Del Rincon,
Mohamed Amine Ben Souf, Pablo Garcia Fernandez, Fakher Chaari,
Fernando Viadero Rueda, and Mohamed Haddar
Water-Hammer Control in an Actual Branched Cast Iron Network
by Means of Polymeric Pipes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235
LamjedHadjTaieb,MedAmineGuidara,NouraBettaieb,SamiElAoud,
and Ezzeddine Hadj Taieb
Materials Behavior in Dynamic Systems
Reliability Based Design Optimization of Shape Memory Alloy. . . . . . . 247
Fatma Abid, Abdelkhalak El Hami, Tarek Merzouki, Hassen Trabelsi,
Lassaad Walha, and Mohamed Haddar
Relaxation of Residual Stresses Induced by Ultrasonic Shot
Peening Due to Cyclic Loading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257
Sondess Manchoul, Raoutha Seddik, Rabii Ben Sghaier,
and Raouf Fathallah
Finite Element Modeling of Shot Peening Process . . . . . . . . . . . . . . . . . 266
Raoudha Seddik, Akram Atig, Rabii Ben Sghaier, and Raouf Fathallah
Predicting the A356-T6 Cast Aluminum Alloy’s High-Cycle
Fatigue Life with Finite Elements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276
Amal Ben Ahmed, Mohamed Iben Houria, and Raouf Fathallah
Tensile Fatigue Behavior of Carbon-Flax/Epoxy Hybrid Composites. . . 284
Mariem Ben Ameur, Abderrahim El Mahi, Jean-Luc Rebiere,
Moez Beyaoui, Moez Abdennadher, and Mohamed Haddar