Advances and Trends in Engineering Sciences and Technologies II: Proceedings of the 2nd International Conference on Engineering Sciences and ... Tatranské Matliare, Slovak Republic PDF
Preview Advances and Trends in Engineering Sciences and Technologies II: Proceedings of the 2nd International Conference on Engineering Sciences and ... Tatranské Matliare, Slovak Republic
ADVANCES AND TRENDS IN ENGINEERING SCIENCES AND TECHNOLOGIES II PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON ENGINEERING SCIENCES AND TECHNOLOGIES, HIGH TATRAS MOUNTAINS, TATRANSKÉ MATLIARE, SLOVAK REPUBLIC, 29 JUNE – 1 JULY 2016 Advances and Trends in Engineering Sciences and Technologies II Editors Mohamad Al Ali & Peter Platko Institute of Structural Engineering, Faculty of Civil Engineering, Technical University of Košice, Košice, Slovakia CRC Press/Balkema is an imprint of the Taylor & Francis Group, an informa business © 2017 Taylor & Francis Group, London, UK Typeset by V Publishing Solutions Pvt Ltd., Chennai, India Printed and bound in the UK and the US All rights reserved. No part of this publication or the information contained herein may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, by photocopying, recording or otherwise, without written prior permission from the publisher. Although all care is taken to ensure integrity and the quality of this publication and the information herein, no responsibility is assumed by the publishers nor the author for any damage to the property or persons as a result of operation or use of this publication and/or the information contained herein. Published by: CRC Press/Balkema P.O. Box 11320, 2301 EH Leiden, The Netherlands e-mail: [email protected] www.crcpress.com – www.taylorandfrancis.com ISBN: 978-1-138-03224-8 (Hbk) ISBN: 978-1-315-39382-7 (eBook) Advances and Trends in Engineering Sciences and Technologies II – Al Ali & Platko (Eds) © 2017 Taylor & Francis Group, ISBN 978-1-138-03224-8 Table of contents Preface xiii Committees xv Part A: Computer simulation and modeling, Mechanics and dynamics, and Reliability and durability of structures Drift design approach for steel tall buildings according to Eurocode 3 3 C. Amaddeo, K. Taskin & T. Orhan Weldability estimation of steels for hot work by the CCT diagrams 9 D. Arsić, V. Lazić, R.R. Nikolić & B. Hadzima Resistance of flat slabs by different applications of concentrated load 15 T. Augustín & Ľ. Fillo Parameters of various timber-concrete composite connection systems 21 V. Bajzecerová & J. Kanócz Plastic resistance of IPE-section to interaction of bending internal forces M , y,Ed V and torsion internal forces B , T and T 27 z,Ed Ed ω,Ed t,Ed I.J. Baláž, Mi. Kováč, T.J. Živner & Y.P. Koleková Plastic resistance of H-section to interaction of bending moment M and y,Ed bimoment B 33 Ed I.J. Baláž, Mi. Kováč, T.J. Živner & Y.P. Koleková Experimental investigations of glass plates 39 Ľ. Balcierák, J. Brodniansky Sr., T. Klas, V. Duchoň, J. Brodniansky & O. Katona The reliability of slender concrete columns subjected to a loss of stability 45 V. Benko, T. Gúcky & A. Valašík The cracking of prestressed girders influenced by decreased bond of tendons 51 V. Borzovič, K. Gajdošová, M. Pecník & J. Laco EUGLI imperfection method for columns with varying cross-sectional parameters – numerical solution 57 J. Brodniansky, Ľ. Balcierák, V. Duchoň & O. Katona Analysis of passive and active Levy cable dome 63 P. Cauner & V. Urban Application of system identification on a steel footbridge across the Little Danube River 69 M. Fábry, R. Ároch & I. Lipták v Non-linear analysis of concrete slender columns 75 Ľ. Fillo, V. Knapcová & M. Čuhák Numerical solution for rotational stiffness of RHS tubular joints 81 M. Garifullin, N. Vatin, T. Jokinen & M. Heinisuo Overall imperfection method for beam-columns 87 G. Hajdú & F. Papp Punching resistance of column basis 93 J. Halvonik, J. Hanzel & L. Majtánová Identifying the causes of failure using Bayesian networks 99 M. Holický Risk-based target reliability 105 M. Holický Experimental analysis of a composite steel-concrete slab 111 A. Hrušovská & Š. Gramblička Reduction of computational operations in the DOProC method 117 P. Janas, M. Krejsa & V. Krejsa Optimum design of a cellular shell structure of a belt-conveyor bridge 123 K. Jármai & J. Farkas Analysis of stress inside the sandwich composite structure 129 D. Jiroutová Resistance of timber structures exposed to fire 135 Z. Kamenická & M. Botló Local buckling of rectangular steel tubes filled with concrete 141 R. Kanishchev & V. Kvočák Experimental study of a four-point bending test on CLT deep beams 147 O. Katona, T. Klas, V. Duchoň, J. Brodniansky, Ľ. Balcierák & J. Sandanus Aerodynamic analysis and improvements of a solar car 153 V. Kiricci, A.O. Celik, C. Insel & E. Guner Evaluation of fibre-reinforced polymer perfobond rib shear connector resistance tests 159 L. Kolpaský & P. Ryjáček In plane buckling of frames with laced built-up members 165 Mi. Kováč, Zs. Vaník & M. Magura Contact model of the fibre-matrix debonding coupling the interface damage and friction 171 J. Kšiňan & R. Vodička Strain of elements reinforced by GFRP at elevated temperatures 177 Š. Kušnír & S. Priganc Design and realization of composite timber-concrete beams 183 V. Kvočák & M. Al Ali An investigation of glued connections with acrylate adhesives 187 K. Machalická, M. Vokáč & M. Eliášová The maximum punching shear resistance of flat slabs 193 L. Majtánová, J. Hanzel & J. Halvonik vi Verification of experiment of vacuum loading on slab 201 J. Melcher, M. Karmazinova, J. Krsik & J. Krivakova Constitutive equations for selected rheological models in linear viscoelasticity 207 M. Minárová & J. Sumec Simulation modeling in pipeline safety assessment 213 L.V. Muravyeva Analysis of secondary effects due to prestressing at continuous concrete beams at ultimate limit state 219 P. Pazma, J. Halvonik & V. Borzovič Adaptive tensegrity module: Description of an adaptation process 225 P. Platko & S. Kmeť Dynamic identification of composite beam pedestrian bridges 231 G. Poprawa, M. Salamak & P. Klikowicz Evaluation’s methods of the seismic stability of buildings and structures in the Gaza Strip 237 D. Rashid, E.S. Kolosov, N.B. Kolosova & T.N. Soldatenko Verification of reinforced concrete slab model using MSC Patran/Marc 243 V.A. Smirnov Searching for optimally corrected shape of a chosen tensegrity system 249 M. Spisak & S. Kmeť Composite timber-concrete floor of a family house 255 L. Surovec & M. Slivanský Experimental investigation of the effects of tensile force on the characteristics of turbulence downstream of a novel active grid 261 N. Szaszák, P. Bencs & Sz. Szabó Crack initiation in concrete specimens based on alkali-activated binders 267 H. Šimonová, L. Topolář, I. Havlíková, I. Rozsypalová, B. Kucharczyková, Z. Keršner & V. Bílek Jr. A finite element algorithm of cables on pulleys 273 H. Štekbauer & I. Němec Modeling of the airflow in the small-scale model of ventilated air channel 279 L. Tazky & A. Sedlakova Reduction of ceiling vibrations by stiffness modification of a load-bearing structure 285 M. Tomko, R. Soltys & I. Demjan The acoustic non-destructive methods and their application to stress situation construction materials 291 L. Topolář, L. Pazdera, K. Timčaková & D. Štefková University BIM distance learning course for secondary school students 297 K. Usanova & N. Vatin The numerical analysis of deteriorated steel elements reinforced with CFRP 303 J. Vůjtěch, P. Ryjáček & M. Vovesný Basic features of aggregate-matrix-interface fracture of concrete: Pilot modelling 309 M. Vyhlídal, H. Šimonová, V. Veselý, Z. Keršner, J. Klusák & L. Malíková vii Part B: B uildings and structures, Construction technology and management, Environmental engineering, Heating, ventilation and air condition, Materials and technologies, and Water supply and drainage Diagnostics to determine the cause of occurrence of cracks on ETICS 317 N. Antošová, M. Ďubek & M. Petro Verification of the technology choice repairs ETICS 323 N. Antošová, M. Ďubek & M. Petro Technical measurement of the green roof in a winter season 329 R. Baláž & S. Tóth Assessment of ground water infiltration to the basement garage spaces 335 R. Baláž & S. Tóth Monitoring the effectiveness of sorbent materials for removing selected metals from water 341 R. Biela, T. Kučera & J. Konečný Technology of waterproofing membranes based on mPVC for flat roof 347 M. Božík, M. Ivanko, A. Mečiar & M. Petro Importance of aerodynamic quantification in the determination of heat losses in buildings 353 I. Bullová New methods of optimizing building maintenance 359 Z. Cúciková, M. Hanko, V. Somorová & R. Matúšek The inclusion of a water feature to the interior and its impact on internal microclimate 365 K. Čákyová & Z. Vranayová A human induced landslide in the centre of a town 371 W. Dąbrowki, M. Zielina & J. Bąk Implementing effective Supply Chain Management (SCM) strategies 377 N. Daneshjo, M. Kravec, A.A. Samer & J. Krivosudská Detecting fibers in the cross sections of steel fiber-reinforced concrete 383 M. Ďubek, P. Makýš, M. Petro & P. Briatka Waste water treatment in North Moravia and Silesia, from the past to the present 389 T. Dvorský, V. Václavík & P. Hluštík Model house with modifiable disposition 395 J. Gašparík, J. Piatka, P. Šimko, M. Šmotlák & P. Orosi Optimizing method of building machine group selection implemented into soil processes with software support 401 J. Gašparík, S. Szalayová, Z. Hulínová, L. Paulovičová & V. Laco Spatio-temporal analysis of soil properties for the eastern border of the European Union 407 E. Glowienka, K. Michalowska & A. Pekala Use of the program SWMM to simulate rainfall runoff from urbanized areas 413 P. Hluštík, M. Úterský, V. Václavík & T. Dvorský Causes and impacts of dropping water consumption on a wastewater treatment plant 419 P. Hluštík, V. Václavík & T. Dvorský Effectiveness of costs incurred for labor protection 425 Z. Hulínová, T. Funtík, J. Madová & A. Bisták viii Fiber optic temperature measurement of mass concrete at an early age – case study 433 N. Humar, D. Zupan & A. Kryžanowski The effect of distance and noise barrier at the dispersion of pollutants in the vicinity of roads 441 D. Jandacka & D. Durcanska The effective use of renewable energy in the design of construction equipment 447 E. Jankovichová, M. Nguyen Tien & S. Hajduchová Properties of autoclaved aerated concretes produced with different types of fibers 453 C. Karakurt & Ö. Korkmaz Selected problems of temperature conditions in the interior of large area of single store halls 459 J. Katunská, D. Katunský & S. Tóth The efficiency of green roofs to mitigate urban heat island effect in Rio de Janeiro 465 S. Konasova Thermal mass of building construction versus operative temperature 471 K. Kovacova & M. Kovac Effect of admixtures on probabilistic indexes of concrete quality with consideration of environmental impact 477 S. Koval, M.J. Ciak & N. Ciak The possible areas to use 3D printers in building constructions 483 B. Kovářová Knowledge database of modern methods of construction 489 M. Kozlovska, D. Mackova & M. Spisakova Impact of construction activities on GDP in the Czech Republic and its regions 495 L. Kozumplíková, J. Korytárová & B. Puchýř Wooden structures: Traditional and yet forgotten 501 I.H. Krčmář Microorganisms growing on insulated façades 507 M. Kubečková, V. Kučeriková & D. Kubečková Changes in housing demands and their influence on overall user comfort for a block of flats in the Czech Republic 513 D. Kuta, J. Ceselsky & M. Zubkova Contactless method of measuring displacement in the study of brick prisms 519 D. Łątka & M. Tekieli Evaluating adhesion of weatherproofing sealant joints: Price vs. quality 525 P. Liška, B. Nečasová & J. Šlanhof Vertical distribution of compact air jets in the hall of an ice arena 531 E.A. Loktionova, D.Y. Malyshevsky, D.I. Schemelinin & D.D. Zaborova Theoretical and methodological principles of impact assessment of strategic documents on environment and health 537 M. Majerník, N. Daneshjo & G. Sančiová Modelling of integrated impact assessments of development strategies 543 M. Majerník, G. Sančiová, N. Daneshjo & J. Krivosudská ix
The list of books you might like
