Advanced Materials and Structural Engineering : Proceedings of the International Conference on Advanced Materials and Engineering Structural Technology (ICAMEST 2015), April 25-26, 2015, Qingdao, China

942 Pages·2016·31.222 MB·English

by  Hu, Jong Wan

ADVANCED MATERIALS AND STRUCTURAL ENGINEERING
IICCAAMMEESSTT--FFMM..iinndddd ii 1122//77//22001155 11::0055::3333 AAMM

PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND
ENGINEERING STRUCTURAL TECHNOLOGY (ICAMEST 2015), 25–26 APRIL 2015, QINGDAO,
CHINA
Advanced Materials and Structural
Engineering
Editor
Jong Wan Hu
Incheon National University, South Korea

IICCAAMMEESSTT--FFMM..iinndddd iiiiii 1122//77//22001155 11::0055::3344 AAMM
CRC Press/Balkema is an imprint of the Taylor & Francis Group, an informa business
© 2016 Taylor & Francis Group, London, UK
Typeset by V Publishing Solutions Pvt Ltd., Chennai, India
Printed and bound in Great Britain by CPI Group (UK) Ltd, Croydon, CR0 4YY
All rights reserved. No part of this publication or the information contained herein may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
by photocopying, recording or otherwise, without written prior permission from the publisher.

Although all care is taken to ensure integrity and the quality of this publication and the information
herein, no responsibility is assumed by the publishers nor the author for any damage to the property or
persons as a result of operation or use of this publication and/or the information contained herein.
Published by: CRC Press/Balkema
P.O. Box 11320, 2301 EH Leiden, The Netherlands
e-mail: [email protected]
www.crcpress.com – www.taylorandfrancis.com
ISBN: 978-1-138-02786-2 (Hbk)
ISBN: 978-1-315-68302-7 (eBook PDF)
IICCAAMMEESSTT--FFMM..iinndddd iivv 1122//77//22001155 11::0055::3344 AAMM
Advanced Materials and Structural Engineering – Hu (Ed.)
© 2016 Taylor & Francis Group, London, ISBN 978-1-138-02786-2
Table of contents
Preface xvii
Organization xix
Advanced material and application
Production of external thread by means of enveloping with hob cutter 3
E.V. Glushko, N.T. Morozova & N.A. Glushko
Comparing between OECD member countries based on S&T innovation capacity 7
S.R. Lee & S.S. Chun
Dependence of the coercive force on the size of the core/shell nanoparticles
magnetite/titanomagnetite 13
M. Shmykova, L. Afremov & I. Iliushin
The interaction between contacting barrier materials for containment of radioactive wastes 17
H.C. Chang, C.Y. Wang & W.H. Huang
Structural and technological patterns of formation of surface nanostructured layers
TiNiZr by high-speed flame spraying 21
P.O. Rusinov & Zh.M. Blednova
Determination of a constitutive relation for damage of Al-Si-Cu alloy (ADC12) 25
Y.M. Hu, H.R. Zheng, Z.F. Li, X.Q. Jin & Y.E. Zhou
Study on phase transition of metallic materials by Specific Volume Difference Method 33
K.J. Liu, W.Y. Fu & S.L. Ning
A review on research and application development of Super Absorbent Polymer
in cement-based materials 37
W.Q. Bai, J. Lv, Q. Du & H.H. Wu
The effect of reducing agents on GO/manganese oxide composites for super-capacitors 43
F.F. Ding, N. Zhang & C. Zhang
The properties of cementitious materials in prolonged curing 47
X.T. Yu, P. Gao, X. Wang & Y.D. Liao
Dynamic tensile behavior of Flattened Brazilian Disc of TiB-BC composites 51
2 4
Y.B. Gao, W. Zhang, T.G. Tang & C.H. Yi
Dibenzothiophene adsorption on Activated Carbons and its water effect 57
Z.J. Li, S.L. Jin, S.M. Zhang, N. Jiang, X. Shao, M.L. Jin & R. Zhang
The preparation and desulfurization performance of carbon aerogels in-situ loaded
with copper for fuel oils 63
S.M. Zhang, Z.J. Li, N. Jiang, H.F. Zhang & R. Zhang
Synthesis of Ni-loaded carbon aerogels by in-situ and incipient wetness methods and their
adsorption performance for dibenzothiophene in model fuel oil 67
N. Jiang, S.L. Jin, X. Shao, H.F. Zhang, Z.J. Li, S.M. Zhang, M.L. Jin & R. Zhang
An experimental technique to investigate gas-turbine blades dry-friction dampers efficiency 71
M. Nikhamkin, N. Sazhenkov, S. Semenov & I. Semenova
v
IICCAAMMEESSTT--FFMM..iinndddd vv 1122//77//22001155 11::0055::3344 AAMM
A nonlinear compressive response of polypropylene 77
H. Zheng, Y.G. Liao, K. Zhao & Z.P. Tang
Comparative investigation into the catalytic efficiency of Ni and Fe in the formation of carbon coils 81
H.J. Kim, G.H. Kang, J.K. Lee & S.H. Kim
The effect of orifice head loss coefficient on the discharge of throttled surge tank 87
S. Palikhe & J.X. Zhou
Effect of an enclosed cage structure on the chain characteristics of TSP-POSS/PU
hybrid composites 93
R. Pan, L.L. Wang & Y. Liu
The preparation, characterization and properties of LaO/TPU nano-composites 99
2 3
C.F. Wang & R.P. Jia
Analysis on the thermal decomposition process for the preparation of cobalt-doped zinc
oxide from oxalate 103
J.W. Li & S.X. Guo
Compensating the shrinkage and expansive stress of CaO-based Expansive Additives
treated by thermoplastic polyacrylic esters 107
R. Wang, W. Xu, Q. Tian & J.Y. Jiang
Effect of the pH level of the electrolyte on the photocatalytic performance
of TiO nanotubes 111
2
C.S. Chen, S.Z. Yi & C. Wang
Forming limit prediction of 5182-O aluminum alloy sheet using finite
element analysis 115
R. Kurihara, S. Nishida, H. Kamiyama & R. Okushima
Fabricating polymer films on a super-hydrophobic surface by the blow film method 119
Y. Ma, J.L. Zhao, K. Li, J.J. Zhang, C.M. Kang, H.Z. Zhang & X.Y. Zhang
Microelectrode-based sensor for detecting viability and activity of cells 123
X. Zhu
Impact of the microstructure and texture on the elastic modulus in an electron
beam-welded near-α titanium alloy joint 127
X.Z. Li, S.B. Hu & J.Z. Xiao
Considering air compressibility in analyzing gap pressure in the partially porous
aerostatic journal bearing 131
T.Y. Huang, S.Y. Hsu & B.Z. Wang
Structural and optical studies of thermally evaporated NiPc thin films 139
V. Mekla & C. Saributr
Effect of carbon content on the properties of LiFePO/C synthesized by hydrothermal
4
stripping technique 143
G.Q. Wan, P.F. Bai, J. Liu, X.M. Zu, L. Chen & X.Y. Wang
Optimization of ultrasound-assisted extraction conditions for active substances
with anti-tyrosinase activity from tomatoes 147
J. Han & G.M. Gong
Purification and properties of nitrite reductase from lactobacillus plantarum 151
Y. Zhou & G.M. Gong
The influence of on semi-flexible airport pavement material working performance by porosity 157
B. Yang, X. Weng, J. Liu, L. Jiang, J. Zhang, P. Liu & X. Wen
Electrochemical detection of baicalin at a carbon nanosphere-modified electrode 163
Z.F. Wang, L. Shi, G.Z. Gou, A.P. Fan, C. Xu & L. Zhang
Pt/C catalyst for methanol electro-oxidation and oxygen electro-reduction in DMFC 167
Z.F. Wang, L. Shi, G.Z. Gou, A.P. Fan, C. Xu & L. Zhang
vi
IICCAAMMEESSTT--FFMM..iinndddd vvii 1122//77//22001155 11::0055::3344 AAMM
Pt/C-modified Glass Carbon Electrode for the determination of Dopamine, Uric Acid
and Ascorbic Acid 171
Z.F. Wang, L. Shi, G.Z. Gou, A.P. Fan, C. Xu & L. Zhang
Electrochemical sensor based on Polyaniline-modified Graphene Nano-composites
for dopamine determination 175
L. Shi, Z.F. Wang, G.Z. Gou, Q.S. Pan, X.L. Chen & W. Liu
Electrochemical sensor for ascorbic acid based on graphene-polyaniline nano-composites 179
L. Shi, Z.F. Wang, G.Z. Gou, Q.S. Pan, X.L. Chen & W. Liu
Influence of low firing temperature on the characteristics of Positive Temperature Coefficient
of Resistance and the Ni internal electrode of multilayer Ba (Ti Nb)O ceramics 183
1.005 1-x x 3
X.X. Cheng, B.W. Li, Z.X. Zhao & X.X. Li
Effects of interstitial impurity content on the plastic deformation behavior in austenitic
steel monocrystals 187
S. Barannikova, A. Malinovsky & D. Pestsov
An experimental method of the cutting force coefficient estimation of grey cast iron FC25 193
N.T. Nguyen, M.S. Chen, S.C. Huang & Y.C. Kao
Changes in the state of stress in enclosing panels after additional thermal insulation 199
C. Radim, B. Kamil, M. Petr & L. Jana
Slag from Biomass Combustion (BCS)—chemical properties in accordance with BCS
utilization in cement concrete 205
F. Khestl, P. Mec, M. Turicová & V. Šulková
Fundamental thermo-elastic solutions for 2D hexagonal Quasicrystal 209
T. Wang
Effect of induction heating power on zinc-coating quality 213
F. Fang, Y.M. Chen & L.X. Wang
High-temperature deformation and strain measurement for aircraft materials using digital
image correlation 217
A.P. Feng, J. Liang, H. Hu & X. Guo
Material selection of auto-body plates based on simplified models 223
Y.W. Luo, A. Cui, Q. Xu & S.Z. Zhang
MFC/NFC aerogel-Ag composite and its application 229
J.H. Yan, G.B. Kang & R.M. Xu
Nanopaper with Ag composite and its application 233
J.H. Yan & R.M. Xu
Effective thermal conductivity of multiple-phase transversely isotropic material having
coupled thermal system 237
S.A. Hassan, A. Israr, H.M. Ali & W. Aslam
Using optical methods to determine high resolution Coefficient of Thermal Expansion
of materials 243
S.A. Hassan, H.M. Ali, M.A.A. Khan, W. Aslam & M.H. Ajaib
Study on the properties of W-C infiltrated strengthening layer on H13 steel surface formed
by plasma alloying 247
H.P. Zou & M.W. Chen
Petrographic and chemical assessment of siliceous limestone for cement production suitability 251
N. Bouazza, A. El Mrihi & A. Maâte
Structural and civil engineering
A study on the fatigue strength of a truck in railway applications 259
S.C. Yoon
vii
IICCAAMMEESSTT--FFMM..iinndddd vviiii 1122//2288//22001155 66::5577::0044 PPMM
A method for constructing a simplified model of wire strand cable 265
Y.M. Hu, X. Tan, B.W. Zhou & J.S. Li
Synergistic interaction of scaling and abrasion on the fly ash concretes 271
A. Nowak-Michta
Performance comparison analysis of SUP-13 Lucobit asphalt mixture 277
Y.M. Zhang, M.L. Zheng & K. Wang
Quantitative inspection of ferroconcrete damage by using ground-penetrating radar 281
C.W. Chang, C.H. Lin, C.C. Jen, C.A. Tsai, H.Y. Chien & P.S. Huang
Properties of the advanced sulfur-bituminous pavements 285
E.V. Korolev, V.A. Gladkikh & V.A. Smirnov
Application research on concrete recycled aggregate of construction waste in the road base 289
T.Z. Ming, K. Wang & G.W. Hu
Design an angle-inserting joint for steel sandwich panel 293
X.J. Wu, F.L. Meng & X.G. Meng
Green Building Development system modeling and simulation 297
J.Y. Teng, L.M. Zhang, J.B. Zhong, C.Y. Du & H.Y. Chen
Corrosion measurement of galvanic cell-type concrete sensor 301
J.A. Jeong & J.M. Ha
The analysis of air flows near the windbreak constructions on offshore structures 305
I.V. Dunichkin
Research on the construction technique for integrated control of embankment settlement due
to extending of pile platform into subgrade 309
X.Q. Wang, Y.L. Cui, S.M. Zhang, B.C. Qian & F.L. Li
Research on the construction technology of self-water stopping pit support structure
of pre-stressed pipe piles 313
X.Q. Wang, Y.L. Cui, S.M. Zhang, J. Song, M.G. Zhang & R.G. Lin
Incentive contract design of construction engineering time based on the
principal-agent model 317
L. Yan & X.J. Tang
Studying of the influence to property of road base with cement stabilized gravel
by the iron tailings sand 321
L. Hongbin & Z. Jiannan
Durability of concrete to sulfate attack under different environments 327
B.H. Osman, E. Wu, B. Ji & A. Ishag
Experimental study on particle drift velocity in single-stage double-vortex
collecting plate ESP 333
C.W. Yi, Y.N. Huang, J. Zhang, H.J. Wang & C.X. Lu
Synthesis and modification of polyurethane type track 339

X.H. Zeng, J.P. Luo & H.Q. Hu
Recognition of traffic signs using local feature multi-layer classification 343
Y. Ye & X. Hao
Detection of traffic signs based on multi-feature high credibility regions 349
Y. Ye & X. Hao
The role of cementitious materials in building materials 355
F.Q. Zhang
Time-domain buffeting analysis of suspension bridge under non-stationary
typhoon excitation 359
Y.L. Qiu, W.H. Guo & J.Q. Wang
viii
IICCAAMMEESSTT--FFMM..iinndddd vviiiiii 1122//77//22001155 11::0055::3344 AAMM
Mechanism analysis for punching shear strength of hollow flat slabs 365
K.H. Yang, S.H. Yun & S.T. Park
Establishing a Decision Support Module for bridge maintenance in Taiwan 371
N.J. Yau & H.K. Liao
Strut-and-Tie Model for shear capacity of squat shear walls 377
J.H. Mun, W.W. Kim & K.H. Yang
Abnormal vibration analysis of a metro vehicle 383
H.Q. Liu & H.Y. Dai
Structure health monitoring using the matched chaotic excitation 387
D.D. Yang, H.G. Ma & D.H. Xu
Evaluation of consulting firms for Mass Rapid Transit projects 393
N.J. Yau & C.H. Sun
Flexural behavior of hollow deck-plate slabs with simplified construction procedure 399
K.H. Yang, M.K. Kwak, S.H. Yun & S.T. Park
Diffusion model and damage development of concrete exposed to freeze-thaw cycles 405
L. Jiang, X.Z. Weng, B.H. Yang, R.Y. Zhang, J.Z. Liu & X.C. Yan
Fundamental properties of lightweight foam soil concrete using high volume
Supplementary Cementitious Materials 411
K.H. Lee & K.H. Yang
Fatigue stress–strain relationship of normal- and light-weight concrete mixtures under
axial compression 415
J.S. Mun, K.H. Yang & S.J. Shin
Performance parameters of concrete and asphalt-concrete surfaces 419
J. Rajczyk, M. Rajczyk & J. Kalinowski
Pedestrian-induced vibrations in footbridges: A Fully Synchronized Force Model 423
M.A. Toso & H.M. Gomes
Shrinkage of phosphoaluminate cement concrete 429
W.J. Long, X.W. Xu, J.G. Shi, S.F. Zhao & X.L. Fang
Road surface micro- and macrotexture evolution in relation to asphalt mix composition 433
T. Iuele
Effect of welding speed on the micro-hardness and corrosion resistance of similar
laser welded (304/304) stainless steels and dissimilar (304/A36) stainless and carbon steels 437
M.M. Tash & K.M. Gadelmola
Mechanical and industrial engineering
Reliability of detection of Glass Break in Intrusion and Hold-Up Alarm Systems 445
V. Nídlová & J. Hart
A system utility analysis of Multiple Launcher Rocket System 449
H.F. Wang, C.W. Han & C. Zhao
The influence of sintering temperature on microstructure and electrical performances
of (1-x)BCZT-xCuO lead-free ceramics 455
J.J. Jiang, P. Xu & Q.B. Liu
Effect of Li on the microstructure and electrical properties of BCZT-xLi lead-free
piezoelectric ceramics 459
L.L. Yao, X.Q. Huang & Q.B. Liu
The key controlling factors of tight sandstone reservoir of the lower Shihezi formation
in Linxing area in eastern Ordos Basin 463
D. Zhao, H. Xu, D.Z. Tang, L. Li,T.X. Yu & S.Z. Meng
ix
IICCAAMMEESSTT--FFMM..iinndddd iixx 1122//77//22001155 11::0055::3344 AAMM
Q&P process in manufacture of hollow products 467
B. Masek, K. Opatova & I. Vorel
Generalized-K (GK) distribution: An important general channel model for
mobile fading channels 473
Y. Li
Thin-layer element modeling method of aero-engine bolted joints 477
X.Y. Yao, J.J. Wang & X. Zhai
The effect of controlled cooling after hot rolling on the microstructure and mechanical
properties of LX72A 483
M. Jia & J. Liu
A finger-interaction-based LED control system 491
S.W. Jang, K.H. Seok & Y.S. Kim
Development of a SMPS system using LLC resonant converter for high efficiency LED driver 495
J.H. Ko & Y.S. Kim
Numerical test derivation of the computational formula for the composite modulus
of high-speed rail substructure composite foundation 499
H.R. Wei & G.L. Zhang
Thermal diffusivity and electrical resistivity measurements of a 30CrMnSiA rolled steel
sheet under different thermal conditions 505
W.Q. Khan & Q. Wang
Microstructure and mechanical property of TiC/Ti composite layer fabricated
by laser surface alloying 509
J.J. Dai, J.Y. Zhu, S.Y. Li, L. Zhuang, A.M. Wang & X.X. Hu
Specification of aeroelastic model design for further aerodynamic experiments 513
O.O. Egorychev & O.I. Poddaeva
An approach to view factor calculation for pool fires in the presence of wind 517
J.L. Zhao, H. Huang, M. Fu & B. Su
How construction industry safety climate affect migrant workers’ safety performance:
A structural equation model-based analysis 521
Q. Liu, Y.H. Wang, L.M. Zhang, C.Y. Du & H.Y. Chen
A study on a turbine blade riveting device design by using finite element
analysis and experiments 527
G.J. Kang & B.Y. Moon
Single-machine scheduling with past-sequence-dependent setup times and
sum-of-logarithm-processing-times-based learning considerations 531
X.G. Zhang & Q.L. Xie
A strategy for assembly using active compliant for industrial robots with F/T sensor 535
T. Zhang, B. Wang & J.J. Lin
Longitudinal contact analysis of gear pair with alignment error 541
J. Xiao, X.C. Gui, Q. Sun & Y.H. Sun
The study on mechanical properties of Carboxymethyl Chitosan hybrid PVA hydrogels 547
J.P. Luo, H.Q. Hu & X.H. Zeng
The study on mechanical properties of semi-IPN hydrogels consisting of crosslinked
PNIPA network and linear Carboxymethyl Chitosan 551
J.P. Luo, H.Q. Hu & X.H. Zeng
The study of the transmission mechanism of landslide-generated waves and the research
of the landslide surge effect on dam 555
S.L. Wu, H. Peng, J.L. Zhang, M. Li, J. Deng, G.D. Ma & Q.Q. Jiang
x
IICCAAMMEESSTT--FFMM..iinndddd xx 1122//2288//22001155 66::5577::1155 PPMM