10.0 fire protection & fire fighting works technical specifications

1643 Pages·2016·16 MB·English

SOUTH ASIAN UNIVERSITY
Akbar Bhawan, Chanakyapuri, New Delhi
Construction of South Asian University Campus at Maidan Garhi, New Delhi. Package-
III: (i) Admini stration Building (ii) Library Building (iii) Institute of South Asian Studies
and Interdisciplinary Research (iv) Faculty of Law and Humanities (v) Faculty of
Physics, Chemistry, Maths and I.T. (vi) Faculty of Art & Design and Convention Centre
(vii) Utility Building: Including Basements, Superstructu res, Interior Finishes, Internal
Water Supply, Sanitary Installations, Drainage, Internal Electrical Installations , HVAC,
Lifts, Fire Fighting System, Low Voltage System ; PA System, Solar Water Heating
System etc. External Site Development and Infrastructu re; Roads, Street Light ing,
Sewerage, Storm Water Drainage, STP, WTP, Water Supply, HT & LT Power
Distribut ion, Electrical Substation, Chiller Plant, Pump House, D.G. Sets, Rainwater
Harvesting, Hardscaping etc.
Percentage Rate Tender for Works
PART A
Technical / Eligibility Bid
Notice Inviting Tender, Eligibility Criteria,
General Conditions of Contract
PART B
Special Conditions and Particular
Specifications and Tender Drawings
PART C
Financial Bid
September 2016

SOUTH ASIAN UNIVERSITY TENDER PACKAGE III
N I T
N.I.T. No. : 09/NIT/SAU-9A/2016
Name of work : Construction of South Asian University Campus at Maidan Garhi, New Delhi.
Package-III: (i) Administration Building (ii) Library Building (iii) Institute of South Asian Studies and
Interdisciplinary Research (iv) Faculty of Law and Humanities (v) Faculty of Physics, Chemistry,
Maths and I.T. (vi) Faculty of Art & Design and Convention Centre (vii) Utility Building: Including
Basements, Superstructures, Interior Finishes, Internal Water Supply, Sanitary Installations,
Drainage, Internal Electrical Installations, HVAC, Lifts, Fire Fighting System, Low Voltage System
; PA System, Solar Water Heating System etc. External Site Development and Infrastructure;
Roads, Street Lighting, Sewerage, Storm Water Drainage, STP, WTP, Water Supply, HT & LT
Power Distribution, Electrical Substation, Chiller Plant, Pump House, D.G. Sets, Rainwater
Harvesting, Hardscaping etc.
Estimated Cost : Rs. 638,89,18,337/-
Earnest Money Rs 6,48,90,000/-
Performance Guarantee 5% of tendered value.
Security Deposit 2.5% of tendered value.
Time For Completion 36 Months
Certified that this NIT contains Part-A from Page 1 to Page 69. & Part-B from Page 1 to Page
1087 and Part-C from Page 1 to Page 481 and Part-D CPWD GCC2014 with modifications and
corrections up to date of uploading the tender by SAU.
Prepared By Vetted By :
PA: PMC:
PART-A 1
REVISION-01
SOUTH ASIAN UNIVERSITY TENDER PACKAGE III
1.0 TABLE OF CONTENTS
S.No. Description Page No.
1.0 Table of Contents 2
2.0 Notice Inviting E - Tender (Press Notification) 8
3.0 PART A : TECHNICAL / ELIGIBILITY BID 9
3.1 Information & instructions for Bidders for E-Tendering Forming Part of 10
Bid Document & to be Posted on Website
3.2 List of documents to be filled in by the Tenderers 14
3.3 Notice Inviting E-Tender - NIT Form CPWD-6 15
3.4 Form of Earnest Money Deposit (Bank Guarantee Bond) 20
3.5 Integrity Pact From SAU 21
3.6 Integrity Pact From Contractor 22
3.7 Integrity Agreement ( Format ) 23
3.8 SAU Contract Agreement ( Format ) 27
3.9 Form of Supplementary Agreement 30
4.0 ELIGIBILITY CRITERIA 32
4.1 Section-I : Brief Particulars of the work 33
4.2 Section- II : Guidelines for Bidders 36
4.3 Section – III : Information regarding Eligibility criterion 40
4.3.1 Letter of Transmittal 40
4.3.2 FORM ‘A’ : Financial Information 41
4.3.3 FORM ‘B’ : Form of Bankers’ Solvency Certificate from a Scheduled 42
Bank
4.3.4 FORM ‘C’ : Details of all works of similar nature completed during the 43
last seven years
4.3.5 FORM ‘D’ : Projects under execution and awarded 44
4.3.6 FORM ‘E’ : Performance Report of Works to be considered for Eligibility 45
4.3.7 FORM ‘F’ : Structure & Organization of the firm/ bidder 46
4.3.8 FORM ‘G’ : Details of Technical & Administrative personnel to be 48
deployed on the work
4.3.9 FORM ‘H’ : Details of construction equipment likely to be used in 49
carrying out the work
5.0 PERCENTAGE RATE TENDER AND CONTRACT FOR WORKS 52
(CPWD-7)
5.1 Letter of Acceptance 54
5.2 Proforma of Schedules : A to F 55
5.3 Annexure I - Equipment for Testing of Materials & Concrete at Site 64
Laboratory
5.4 Annexure II - Plant and Equipment required to be Owned / Taken on 67
lease by the Contractor
5.5 Annexure III - Recovery Rates for Quantities beyond Permissible 68
Variation
5.6 Annexure IV – Deployment Schedule 69
6.0 PART- B : SPECIAL CONDITIONS AND PARTICULAR TECHNICAL 1
6.1 SSpPeEcCiaIFl CICoAnTdiItOioNnSs – General 2
6.2 Special Conditions For Green Building 24
PART-A 2
REVISION-01
SOUTH ASIAN UNIVERSITY TENDER PACKAGE III
S.No. Description Page No.
6.3 Conditions To Be Adhered To As Per Environmental Clearance 29
Obtained From Dpcc For Sau Project
7.0 CIVIL WORKS 31
7.1 Additional Conditions And Particular Specifications For Structural 32
Steel Works
7.2 Additional Conditions And Particular Specifications For 42
Reinforcement Steel
7.3 Additional Conditions And Particular Specifications For Cement 44
7.4 Additional Conditions And Particular Specifications For R.C.C. 46
Work (Design Mix Concrete )
7.5 Additional Conditions And Particular Specifications For Flooring 52
, Wall Lining / Veneer Works
7.6 Additional Conditions And Particular Specifications For Civil 54
Finishes Work
7.7 Additional Conditions And Particular Specifications For Water 55
Proofing Works
7.8 Technical Specifications For Precast Concrete 60
7.9 Technical Specifications For Polyurathene Protected Flooring 62
System
7.10 Technicial Specifications For External Silane Siloxaine Protection 65
Coating For Natural Stones
7.11 Technical Specifications For Hollow Metal Fire Doors As Per Bs/Is 66
Standard
7.12 Technical Specifications For Hollow Metal General Purpose Doors 70
As Per Bs/Is Standard
7.13 Technical Specifications For Pigmented Glass Reinforced Concrete 73
Jaali
7.14 Technical Specifications For Compact Laminate Toilet Cubicles 74
7.15 Technical Specifications For Aluminium Glazing And Door And 76
Windows Works
7.16 Technical Specifications For Structural Glazing 83
7.17 Technical Specifications For Motorized Rolling Shutters 91
7.18 Technical Specifications For Zinc Titanium Standing Seam Roofing 93
System
7.19 Technical Specifications For False Ceilings 97
7.20 Technical Specifications For Double Skin Drywall Partitions 106
7.21 Technical Specifications For Three Winged Manual Revolving Door 109
7.22 Guarantee To Be Executed By Contractor For Removal Of Defects 111
After Completion Of Work
7.23 Guarantee To Be Executed By Contractor For Structural Glazing 112
And Other Related Works
7.24 LIST OF APPROVED MAKES – CIVIL WORKS 114
8.0 SPECIAL CONDITIONS OF CONTRACT FOR E & M WORKS 119
8.1 General 122
8.2 Site Location And Conditions 122

8.3 Scope Of Work 129

8.4 Project Execution And Management 129
8.5 Associated Civil Works 129

PART-A 3
REVISION-01
SOUTH ASIAN UNIVERSITY TENDER PACKAGE III
S.No. Description Page No.
8.6 Safety Barriers And Construction Safety 129

8.7 Use Of Civil Contractor's Established/ Available Facilities At Site By 130
Specialist and Services Contractors/Nominated Sub-Contractors
8.8 Reference Points 130

8.9 Reference Drawings 130

8.10 Samples And Catalogues & List Of Approved Makes: 131
8.11 Shop Drawings: 131

8.12 “As Built" Drawings 132

8.13 Manufacturers 132
8.14 Rating 133

8.15 Inspection And Testing 133
8.16 Testing, Balancing And Commissioning 133
8.17 Performance Guarantee 134
8.18 Quiet Operation And Vibration Isolation 134
8.19 Uptime Guarantee 135
8.20 Instruction / Maintenance Manual 135

8.21 Completion Certificate 135

8.22 Guarantee 135

8.23 Maintenance And Training Of Personnel 135

8.24 Time For Completion 136

8.25 Measurements 136

8.26 Contractor’s Personnel At Site 137

8.27 Site Acceptance Test (SAT) 138

8.28 Handing Over Procedure 138

8.29 Compliance Of Various Rules And Regulations During execution of 138
HVAC Works & Other Works in Line with Green Building Norms as
per GRIHA
8.30 Maintenance During Defect Liability Period 139

8.31 Operation And Maintenance 139

9.0 PLUMBING / SANITARY WORKS TECHNICAL SPECIFICATIONS 144
9.1 Applicable Codes And Standards 145
9.2 Materials And Workmanship 149
9.3 Sanitary Fixtures & C.P. Fittings 152
9.4 D.I. Pipe For Domestic & Flushing Water Supply For External 157
Works
9.5 Hdpe Pipe For Irrigation Water Supply 163
9.6 Gi Pipes & Fittings (Heavy Class) For Water Supply 171
9.7 Valves & Submersible Pumps 181
9.8 UPVC Pipes & Fittings For Waste & Rain Water Pipes 190

PART-A 4
REVISION-01
SOUTH ASIAN UNIVERSITY TENDER PACKAGE III
S.No. Description Page No.
9.9 High Density Polyethylene (HDPE) Piping Work For Effluent 192
Discharge:
9.10 Solar Hot Water System 297
9.11 Pumps And Water Treatment Plant 201
9.12 Sewerage Treatment Plant 232
9.13 LIST OF APPROVED MAKE LIST FOR PLUMBING & 237
SANITARY WORKS
10.0 FIRE PROTECTION AND FIRE FIGHTING WORKS 242
TECHNICAL SPECIFICATIONS
10.1 Scope Of Work: 243
10.2 Pipe Work 245
10.3 Air Vessel 248
10.4 Air Cushion Tank 248
10.5 Fire Brigade Connection 248
10.6 System Drainage 248
10.7 Valve Chambers 248
10.8 Valves 249
10.9 Painting 250
10.10 Excavation 250
10.11 Fire Hydrants 250
10.12 Sprinkler System 252
10.13 Fire Pumps And Allied Equipments 254
10.14 Commissioning & Guarantee 260
10.15 Check List For Commissioning 263
10.16 Electrical Installation: 264
10.17 Hand Appliances 272
10.18 Water Curtain System For Fire-fighting 273
10.19 NOVEC 1230 Clean Agent Gas Flooding System 277
10.20 Technical Data (To Be Filled By Bidders) 279
10.21 Annexure I - Applicable Codes, Standards And Publications 283
10.22 Annexure II - Sheet For Listing Deviations 287
10.23 LIST OF APPROVED MAKES - FIRE PROTECTION AND 289
FIREFIGHTING WORKS
11.0 ELECTRICAL & LV WORKS TECHNICAL SPECIFICATIONS 293
11.1 Internal Wiring 294

11.2 Switches, Receptacles (Modular) & Lighting Fixtures 296
11.3 Lighting Fixtures & Accessories 297
11.4 Distribution Boards And Panels 302

11.5 Earthing System 314
11.6 Lightning Protection System 321
11.7 1.1 KV Grade Cables And Cable Trays 324
11.8 Elevator Works 331
11.9 External Lighting Poles & High Masts 368
PART-A 5
REVISION-01
SOUTH ASIAN UNIVERSITY TENDER PACKAGE III
S.No. Description Page No.
11.10 UPS 373
11.11 Bus Duct (Sandwiched Type) 384
11.12 Cabling For Voice System 386
11.13 Cabling For Data System 392
11.14 Fire Detection Alarm And PA System 401
11.15 IP Based CCTV System 431
11.16 Access Control System 441
11.17 Boom Barrier System 459
11.18 (A) Power Transformer 66 KV/11 KV – Oil Type 462
11.18 (B) Distribution Transformer 11 KV/0.415 KV - Oil Type 474
11.19 66KV GIS Switchgears (SF6 Gas Insulated Metal Enclosed) 485
11.20 11 KV HT Switchgears 508
11.21 Compact Substation With Oil Type Transformer 512
11.22 HT Cable (UE) 525
11.23 IGBT Based Integrated Hybrid Power Factor Correction System 527
11.24 Diesel Generators 531
11.25 SCADA 553
11.26 Energy And Power Management System Specifications 574
11.27 Nitrogen Gas Based Transformer/Reactor Explosion Prevention 589
And Fire Extinguishing System
11.28 Testing 596
11.29 Applicable Standards 599
11.30 APPROVED MAKES OF MATERIALS FOR ELECTRICAL & 605
LV WORKS
12.0 HVAC WORKS TECHNICAL SPECIFICATIONS 614
12.1 General 615
12.2 Applicable Codes and Standards 618
12.3 Heating Ventilation & air-Conditioning 621
12.4 Cooling Towers 634
12.5 Factory Built Air Handling Units (AHU), Fan Coil Units (FCU), 639
Variable Refrigerant System (VRV), Heat Recovery Units & Air
Cooled Split Units
12.6 Circulating Water Pumps 653
12.7 Dual Fluid Precision Air Conditioning 656
12.8 Ducting 662
12.9 Mechanical Ventilation System 671
12.10 Central Heating System 676
12.11 Controls 680
12.12 Water Plumbing Work 688
12.13 Insulation Work 697
12.14 Electrical Work 702
12.15 Inspection, Testing And Commissioning 720
12.16 Annexure I - Terminology 727

PART-A 6
REVISION-01
SOUTH ASIAN UNIVERSITY TENDER PACKAGE III
S.No. Description Page No.
12.17 Annexure II - Schedule Of Technical Data 732
12.18 Annexure III - Testing And Measurement Notes 741
12.19 Annexure IV - Maintenance 743
12.20 Annexure V - DDR For AD1- Administration Building 748
12.21 Annexure VI - DDR For L1- Library Building 775
12.22 Annexure VII - DDR For AC4- Faculty Of Law & Humanity 798
12.23 Annexure VIII - DDR For AC3- Faculty Of Maths, Physics, 823
Chemistry, IT
12.24 Annexure IX - DDR For AC9- South Asian Studies 848
12.25 Annexure X - DDR For External Development 871
12.26 Annexure XI - DDR For U1 - Utility Building 879
12.27 Annexure XII - DDR For AC1 & C1 - Faculty of Art & Design and 920
Convention Centre
12.28 LIST OF APPROVED MAKES HVAC WORKS 962
13.0 BUILDING MANAGEMENT SYSTEM (BMS) WORKS TECHNICAL 965
SPECIFICATIONS
13.1 General 966
13.2 Document Structure 976
13.3 Technical Specifications 983
13.4 Annexure I - I/O Summary 1032
13.5 Annexure II – DDR for BMS Works 1056
13.6 LIST OF APPROVED MAKES – BMS WORKS 1078
14.0 TENDER DRAWINGS 1080
14.1 List Of Tender Drawings 1081
15.0 PART-C - SCHEDULE OF QUANTITIES 1-481

PART-A 7
REVISION-01
SOUTH ASIAN UNIVERSITY TENDER PACKAGE III

SOUTH ASIAN UNIVERSITY
Akbar Bhawan, Chanakyapuri, New Delhi-110021

2.0 NOTICE INVITING E-TENDER ( Press Notification )

Registrar, South Asian University ( SAU ), on behalf of the President, SAU, Delhi invites
online percentage rate bids from eligible firms/contractors in two bid system for the following
work: –

NIT NO: 09/NIT/SAU-9A/2016

Name of work:- Construction of South Asian University Campus at Maidan Garhi, New Delhi.
Package-III: (i) Administration Building (ii) Library Building (iii) Institute of South Asian Studies
and Interdisciplinary Research (iv) Faculty of Law and Humanities (v) Faculty of Physics,
Chemistry, Maths and I.T. (vi) Faculty of Art & Design and Convention Centre (vii) Utility
Building: Including Basements, Superstructures, Interior Finishes, Internal Water Supply,
Sanitary Installations, Drainage, Internal Electrical Installations, HVAC, Lifts, Fire Fighting
System, Low Voltage System ; PA System, Solar Water Heating System etc. External Site
Development and Infrastructure; Roads, Street Lighting, Sewerage, Storm Water Drainage,
STP, WTP, Water Supply, HT & LT Power Distribution, Electrical Substation, Chiller Plant,
Pump House, D.G. Sets, Rainwater Harvesting, Hardscaping etc.

Estimated Cost Rs. 638,89,18,337/-
Earnest Money Rs 6,48,90,000/-
Time for Completion 36 Months
Last Date and Time for Submission of Bids 4th November 2016 (3:00 PM)

For detailed NIT/ Tender Documents/ Details / downloads and for any other correction/
amendments/ modification / extension till the last date of submission of bids, please visit
websites: www.sau.int or www.eprocure.gov.in or www.tenderwizard.com/SAU

Tender submissions can only be made through online mode at www.tenderwizard.com/SAU

Registrar

PART-A 8
REVISION-01