005 VAR AMO Admin

36 Pages·2015·0.35 MB·English

Civil Aviation Regulations Part 5
Part 5
Approved Maintenance Organizations

Subpart A: General .............................................................................................................................. 3
5.001 Applicability ...................................................................................................................................... 3
5.003 Definitions ......................................................................................................................................... 3
5.005 Acronyms .......................................................................................................................................... 3
Subpart B: AMO Certificate ................................................................................................................. 3
5.010 Applicability ...................................................................................................................................... 3
5.013 Compliance with Certificate or Approval ....................................................................................... 3
5.015 Certificate & Operations Specifications ......................................................................................... 3
5.017 Display of AMO Certificate .............................................................................................................. 4
5.020 Privileges of the Approved Maintenance Organization ................................................................ 4
5.023 Limitations on the AMO ................................................................................................................... 4
5.025 Waiver of CAAV ................................................................................................................................ 4
Subpart C: Certification ....................................................................................................................... 5
5.030 Applicability ...................................................................................................................................... 5
5.033 Application for an AMO Certificate ................................................................................................. 5
5.035 Issuance of an AMO Certificate ...................................................................................................... 5
5.037 Duration & Renewal of Certificate .................................................................................................. 5
5.040 Ratings of the AMO .......................................................................................................................... 5
5.043 AMO Limited Ratings ....................................................................................................................... 7
Subpart D: Surveillance & On-Going Validation ............................................................................... 8
5.050 Applicability ...................................................................................................................................... 8
5.053 Inspections & Observations ............................................................................................................ 8
5.055 Continuous Qualification ................................................................................................................ 8
5.057 Maintenance Quality ........................................................................................................................ 8
5.063 Continued Validity of Approval ....................................................................................................... 8
5.065 Changes to the AMO & Certificate Amendments .......................................................................... 8
5.067 Operations Plan ............................................................................................................................... 9
5.070 Extending AMO Certificate .............................................................................................................. 9
Subpart E: Administration ................................................................................................................ 10
5.080 Applicability .................................................................................................................................... 10
5.083 Management Personnel Required for AMO Organizations ........................................................ 10
5.085 Advertising ..................................................................................................................................... 10
5.087 Maintenance Organization Procedures Manual .......................................................................... 10
5.090 Maintenance Procedures & Independent Quality Assurance System ...................................... 11
5.093 Capability List ................................................................................................................................. 11
5.095 Personnel & Training Requirements ............................................................................................ 12
Page 5-1 of 36
Civil Aviation Regulations Part 5
5.097 Record of Certifying Staff .............................................................................................................. 12
5.100 Safety Management System .......................................................................................................... 12
Subpart F: Maintenance Records .................................................................................................... 13
5.110 Applicability .................................................................................................................................... 13
5.113 General ............................................................................................................................................ 13
5.115 Recording Maintenance & Modification ....................................................................................... 13
5.117 Recording Overhauls ..................................................................................................................... 13
5.120 Recording Rebuilds ........................................................................................................................ 14
5.123 Recording Certification for Maintenance Release ....................................................................... 14
5.125 Maintenance Record Entries for Inspections .............................................................................. 14
5.127 Listing of Discrepancies ................................................................................................................ 14
Subpart G: Facilities, Equipment & Data ........................................................................................ 15
5.130 Applicability .................................................................................................................................... 15
5.133 General ............................................................................................................................................ 15
5.135 Housing & Facility Requirements ................................................................................................. 15
5.137 Equipment, Tools & Materials ....................................................................................................... 15
5.140 Airworthiness Technical Data ....................................................................................................... 16
Subpart H: AMO Operating Rules .................................................................................................... 16
5.150 Maintenance Release ..................................................................................................................... 16
5.153 Reporting of Unairworthy Conditions .......................................................................................... 16
5.155 Performance Standards ................................................................................................................. 16
APPENDICES ...................................................................................................................................... 18
Appendix 1 to 5.043: Expanded Requirements of AMO Ratings ......................................................... 18
Appendix 1 to 5.067: Scheduling of Workforce ..................................................................................... 24
Appendix 1 to 5.083: Management Responsibilities ............................................................................. 25
Appendix 1 to 5.087: Contents of Maintenance Organization Procedures Manual ............................ 26
Appendix 2 to 5.087: Regulations of Process and Procedures for Approval of Amendments and
Supplements of a Maintenance Organization Procedures Manual .................. 27
Appendix 1 to 5.090: Specific Requirements of Quality Assurance System ...................................... 27
Appendix 1 to 5.095: Training of AMO Workforce ................................................................................. 29
Appendix 1 to 5.097: Records of Certifying Staff .................................................................................. 29
Appendix 1 to 5.135: Housing and Facility Requirements ................................................................... 30
Appendix 1 to 5.137: Equipment, Tools & Material ............................................................................... 31
Appendix 1 to 5.140: Airworthiness Data ............................................................................................... 32
Appendix 1 to 5.150: Certification of Maintenance Release ................................................................. 32
Attachments ....................................................................................................................................... 34
Attachment 1 to Part 5: Summary of Amendments ............................................................................... 34
The Remainder of This Page Intentionally Left Blank
Page 5-2 of 36
Civil Aviation Regulations Part 5
SUBPART A: GENERAL
5.001 APPLICABILITY
(a) This Part prescribes the requirements of Vietnam for:
(1) Issuance of approvals to organizations for the maintenance, preventive maintenance, and
modifications of aircraft and aircraft components
(2) The certification and general operating rules for an Approved Maintenance Organization (AMO).
(b) This Part is applicable to the approved organizations and persons working for those organizations that
provide maintenance services for aircraft registered in Vietnam.
5.003 DEFINITIONS
(a) All definitions applicable to this Part are contained in Part 1 (Appendix 1 to 1.007) of these regulations.
5.005 ACRONYMS
(a) The meanings of acronyms in this Part are contained in Part 1 (Appendix 1 to 1.008) of these regulations.
SUBPART B: AMO CERTIFICATE
5.010 APPLICABILITY
(a) This subpart prescribes the requirements that are applicable to the certificate issued to an Approved
Maintenance Organisation.
5.013 COMPLIANCE WITH CERTIFICATE OR APPROVAL
(a) No person may operate a maintenance organization providing maintenance for the aircraft of other
organizations without, or in violation of, an AMO certificate and operations specifications issued under this
Part.
(b) No organization may provide maintenance for the aircraft they are authorized to operate unless they have
required approvals from the CAAV for the maintenance of those aircraft.
5.015 CERTIFICATE & OPERATIONS SPECIFICATIONS
(a) The AMO certificate will consist of two documents:
(1) A one page certificate signed by the CAAV, and
(2) A multi-page Operations Specifications signed by the Accountable Manager and the CAAV containing
the terms, conditions, and authorisations.
(b) No person may operate as a AMO without, or in violation of, a maintenance organization certificate issued
under this Part.
(c) An AMO holder may perform maintenance, preventive maintenance, or modifications on an aircraft,
airframe, aircraft engine, propeller, appliance, component, or part thereof only for which it is rating and
within the limitations placed in its specific operating limitations.
6-I:8.7.1.2 (d) The AMO certificate will contain:
(1) The certificate number specifically assigned to the AMO holder;
(2) The name and location (main place of business) of the AMO holder;
(3) The date of issue and period of validity;
(4) The ratings issued to the AMO holder; and
(5) Authority signature.
(e) The AMO Operations Specifications will contain:
(1) The certificate number specifically assigned to the AMO holder;
Page 5-3 of 36
Civil Aviation Regulations Part 5
(2) The terms of approval, including specific class or limited ratings, special approvals and limitations
issued;
(3) The date issued or revised
(4) Accountable manager and Authority signatures.
5.017 DISPLAY OF AMO CERTIFICATE
(a) The holder of an AMO certificate shall display that certificate in a place in the facilities that is normally
accessible to the public and that is not obscured.
5.020 PRIVILEGES OF THE APPROVED MAINTENANCE ORGANIZATION
(a) The AMO holder shall carry out the following tasks as permitted by and in accordance with the AMO
maintenance procedures manual:
(1) Maintain any aircraft or aircraft component for which it is rated at the location identified in the approval
certificate;
(2) Maintain any aircraft for which it is rated at any location subject to the need for such maintenance
arising from unserviceability of the aircraft;
(3) Provide maintenance services authorized by the CAAV in the AMO operations specifications for AOC
holder as identified in the maintenance procedures manual.
(4) Issue a maintenance release or a return to service in respect of sub paragraphs (a) (1), (2), and (3) of
this Section upon completion of maintenance in accordance with limitations applicable to the AMO
holder.
(b) An AMO holder may not contract out the maintenance, preventative maintenance, modification or alteration
of a complete type-certificated product, and it may not provide only approval for return to service of a
product following contract maintenance.
(c) The AMO holder may maintain or alter any article for which it is rated at a place other than the AMO
principal base, if:
(1) The function would be performed in the same manner as when performed at the AMO principal base
and in accordance with this Subpart;
(2) All necessary personnel, equipment, material, and technical and/or approved standards are available
at the place where the work is to be done; and
(3) The maintenance procedure manual of the station sets forth approved procedures governing work to
be performed at a place other than the AMO principal base.
5.023 LIMITATIONS ON THE AMO
(a) The AMO holder shall maintain an aircraft or aircraft component for which it is approved only when all
necessary housing, facilities, equipment, tools, material, approved technical data and certifying staff are
available.
5.025 WAIVER OF CAAV
(a) CAAV may, upon consideration of the circumstances of a particular maintenance organization, issue a
waiver providing relief from specified sections of this Part, provided that the CAAV finds that:
(1) The circumstances presented warrant the waiver and
(2) That a level of safety will be maintained equal to that provided by the rule from which the waiver is
sought.
(b) This waiver authority will be issued as a letter of waiver.
(c) A Letter of Waiver may be terminated or amended at any time by the CAAV.
Page 5-4 of 36
Civil Aviation Regulations Part 5
(d) A request for a waiver must contain complete statement of the circumstances and justifications for the
waiver requested, and show that a level of safety will be maintained equal to that provided by the rule from
which the waiver is sought.
(e) Each AMO holder that receives a Letter of Waiver must have a means of notifying the appropriate
management, certifying staff, and personnel of the waiver, including the extent of the waiver and when the
waiver is terminated or amended.
SUBPART C: CERTIFICATION
5.030 APPLICABILITY
(a) This Subpart prescribes the general requirements that are applicable to the certification of an approved
maintenance organisation.
(b) The issue of a maintenance organization approval shall be dependent on the organization completing initial
certification and demonstrating conformance to the requirements of this Part to the CAAV.
5.033 APPLICATION FOR AN AMO CERTIFICATE
(a) The CAAV will require an applicant for an AMO certificate to submit the following:
(1) An application in a form and manner prescribed by the CAAV;
(2) Its maintenance procedures manual in duplicate;
(3) A list of the maintenance functions to be performed for it, under contract, by another AMO;
(4) A list of all AMO certificates and ratings pertinent to those certificates issued by any contracting State
other than Vietnam; and
(5) Any additional information the CAAV requires the applicant to submit.
(b) The application for AMO approval must be sent directly or by post. The application must be original, but all
other documents may be copies.
(c) An application for the amendment of an existing AMO certificate shall be made on a form and in a manner
prescribed by the CAAV. The AMO holder shall submit the required amendments to the maintenance
procedures manual to the CAAV for approval.
5.035 ISSUANCE OF AN AMO CERTIFICATE
(a) An applicant may be issued an AMO certificate if, after investigation, the CAAV finds that the applicant:
(1) Meets the applicable regulations and standards for the holder of an AMO; and
(2) Is properly and adequately equipped for the performance of maintenance of aircraft or aircraft
component for which it seeks approval.
5.037 DURATION & RENEWAL OF CERTIFICATE
(a) A certificate or rating issued to a maintenance organization is effective for 12 calendar months unless:
(1) The maintenance organization surrenders the certificate, or
(2) The CAAV suspends or revokes the certificate.
(b) The holder of a certificate that expires or is surrendered, suspended, or revoked by the CAAV must return
the certificate and Operations Specifications to the CAAV.
5.040 RATINGS OF THE AMO
(a) The following are issued as category ratings under this Subpart:
(1) Airframe ratings. An aircraft rating on a maintenance organization certificate permits that maintenance
organization to perform maintenance, preventive maintenance, or modifications on an aircraft,
including work on the powerplant(s) of that aircraft up to, but not including, overhaul as that term
defined in Part 5 under the following classes:
Page 5-5 of 36
Civil Aviation Regulations Part 5
(i) Class 1: Aircraft (other than rotorcraft and aircraft composed primarily of composite material) of
5,700 kg maximum certificated takeoff weight or less.
(ii) Class 2: Aircraft (other than rotorcraft and aircraft composed primarily of composite material)
over 5,700 kg maximum certificated takeoff weight and up to, and including, 34,200 kg
maximum certificated takeoff weight.
(iii) Class 3: Aircraft, (other than rotorcraft and aircraft composed primarily composite material) over
34,200 kg maximum certificated takeoff weight.
(iv) Class 4: Rotorcraft (other than rotorcraft composed primarily of composite material) of 2,736 kg
maximum certificated takeoff weight or less.
(v) Class 5: Rotorcraft (other than rotorcraft composed primarily of composite material) over 2,736
kg maximum certificated takeoff weight.
(vi) Class 6: Aircraft composed primarily of composite material, of 5,700 kg maximum certificated
takeoff weight or less.
(vii) Class 7: Aircraft composed primarily of composite material, over 5,700 kg maximum
certificated takeoff weight
(2) Powerplant ratings. A powerplant rating on a maintenance organization certificate permits that
maintenance organization to perform maintenance, preventive maintenance, or modifications of
powerplants under the following classes:
(i) Class 1: Reciprocating engines.
(ii) Class 2: Turbopropeller and turboshaft engines.
(iii) Class 3: Turbojet and turbofan engines.
(3) Propeller ratings. A propeller rating on a maintenance organization certificate permits that
maintenance organization to perform maintenance, preventive maintenance, or modifications of
propellers under the following classes:
(i) Class 1: Fixed-pitch and ground-adjustable propellers.
(ii) Class 2: Variable-pitch propellers.
(4) Avionics ratings. An avionics rating on a maintenance organization certificate permits that
maintenance organization to perform maintenance, preventive maintenance, or modifications of
avionics equipment under the following ratings:
(i) Class 1: Communication equipment: Any radio transmitting equipment or receiving equipment,
or both, used in aircraft to send or receive communications, regardless of carrier frequency or
type of modulation used; including auxiliary and related aircraft interphone systems, amplifier
systems, electrical or electronic intercrew signalling devices, and similar equipment; but not
including equipment used for navigation of the aircraft or as an aid to navigation, equipment for
measuring altitude or terrain clearance, other measuring equipment operated on radio or radar
principles, or mechanical, electrical, gyroscopic, or electronic instruments that are a part of
communications avionics equipment.
(ii) Class 2: Navigational equipment: Any avionics system used in aircraft for en-route or approach
navigation, except equipment operated on radar or pulsed radio frequency principles, but not
including equipment for measuring altitude or terrain clearance or other distance equipment
operated on pulsed radio frequency principles.
(iii) Class 3: Pulsed equipment: Any aircraft electronic system operated on pulsed radio frequency
principles.
(5) Computer systems ratings. A computer systems rating on a maintenance organization certificate
permits that maintenance organization to perform maintenance, preventive maintenance, or
modifications of digital computer systems and components thereof, that have the function of receiving
external data, processing such data, and transmitting and presenting the processed data under the
following classes:
Page 5-6 of 36
Civil Aviation Regulations Part 5
(i) Class 1: Aircraft computer systems.
(ii) Class 2: Powerplant computer systems.
(iii) Class 3: Avionics computer systems.
(6) Instrument ratings. An instrument rating on a maintenance organization certificate permits that
maintenance organization to perform maintenance, preventive maintenance, or modifications of
instruments under the following classes:
(i) Class 1: Mechanical: Any diaphragm, bourdon tube, aneroid, optical, or mechanically driven
centrifugal instrument that is used on aircraft or to operate aircraft, including tachometers,
airspeed indicators, pressure gauges, drift sights, magnetic compasses, altimeters, or similar
mechanical instruments.
(ii) Class 2: Electrical: Any self-synchronous and electrical indicating instruments and systems,
including remote indicating instruments, cylinder head temperature gauges, or similar electrical
instruments.
(iii) Class 3: Gyroscopic: Any instrument or system using gyroscopic principles and motivated by air
pressure or electrical energy, including automatic pilot control units, turn and bank indicators,
directional gyros, and their parts, and gyrosyn compasses.
(iv) Class 4: Electronic: Any instruments whose operation depends on electron tubes, transistors, or
similar devices including capacitance type quantity gauges, system amplifiers, and engine
testers.
(7) Accessory ratings. An accessory rating on a maintenance organization certificate permits that
maintenance organization to perform maintenance, preventive maintenance, or modifications of
accessory equipment under the following classes:
(i) Class 1: Mechanical. The accessories that depend on friction, hydraulics, mechanical linkage,
or pneumatic pressure for operation.
(ii) Class 2: Electrical. The accessories that depend on electrical energy.
(iii) Class 3: Electronic. The accessories that depend on the use of an electron tube transistors,
lasers, fibre optics, solid-state, integrated circuits, vacuum tubes, or similar electronic controls.
(iv) Class 4: Auxiliary power units (APU’s) that may be installed on aircraft as self-contained units to
supplement the aircraft’s engines as a source of hydraulic, pneumatic, or electrical power.
(8) Specialised service ratings. A specialised service rating may be issued to a maintenance organization
to perform specific maintenance or processes. The Operations Specifications of the maintenance
organization must identify the specification used in performing that specialised service. The
specification may be:
(i) A civil or military specification that is currently used by industry and authorized by the CAAV; or
(ii) A specification developed by the maintenance organization and authorized by the CAAV.
5.043 AMO LIMITED RATINGS
(a) Whenever the CAAV finds it appropriate, it may issue a limited rating to an AMO that maintains or alters
only a particular type of airframe, powerplant, propeller, radio, instrument, or accessory, or parts thereof, or
performs only specialised maintenance requiring equipment and skills not ordinarily found in an AMO. Such
a rating may be limited to a specific model aircraft, engine, or constituent part, or to any number of parts
made by a particular manufacturer.
(b) Limited ratings are issued for:
(1) Aircraft;
(2) Airframe;
(3) Powerplants;
(4) Propellers;
(5) Avionics equipment;
Page 5-7 of 36
Civil Aviation Regulations Part 5
(6) Computer systems;
(7) Instruments;
(8) Accessories; and
(9) Any other purpose for which the CAAV finds the applicant’s request appropriate.
Note: See Appendix 1 to 5.043 for expanded information regarding ratings.
SUBPART D: SURVEILLANCE & ON-GOING VALIDATION
5.050 APPLICABILITY
(a) This subpart prescribes the general requirements that are applicable to the on-going validation of an AMO.
5.053 INSPECTIONS & OBSERVATIONS
(a) CAAV may, at any time, inspect an AMO holder’s facilities and any of its contract maintenance facilities to
determine the organisation’s compliance with this Part.
(b) Arrangements for maintenance, preventive maintenance, or modifications by a contractor must include
provisions for inspections of the contractor by the CAAV
(c) The AMO holder and personnel shall allow the authorised representative of the CAAV unrestricted access
to all locations, equipment, documents and personnel, including all maintenance in progress, in the
accomplishment of these inspections and observations.
(d) The continued validity of the original certification approval shall depend upon the AMO holder being in
compliance with the requirements of this Part.
5.055 CONTINUOUS QUALIFICATION
(a) The AMO holder shall not provide maintenance as an AMO unless its personnel, facilities, equipment and
data continuously meets the requirements and the standards specified in the organization’s maintenance
specifications.
5.057 MAINTENANCE QUALITY
(a) The AMO holder shall provide maintenance at a level of competency that is not suspect.
5.063 CONTINUED VALIDITY OF APPROVAL
(a) Unless the approval has previously been surrendered, superseded, suspended, revoked or expired by 6-I:8.7.1.3
virtue of exceeding any expiration date that may be specified in the approval certificate, the continued
validity of approval is dependent upon:
(1) The AMO remaining in compliance with this Part;
(2) CAAV being granted access to the organization’s facilities to determine continued compliance with
this regulation; and
(3) The payment of any charges prescribed by the CAAV.
(b) The holder of an AMO certificate that expires or is surrendered, suspended, or revoked, shall return it to the
CAAV.
5.065 CHANGES TO THE AMO & CERTIFICATE AMENDMENTS
(a) To enable the CAAV to determine continued compliance with this Part, the AMO holder shall provide written
notification to the CAAV either prior to, or within a time period determined by the CAAV to be as soon as
practicable after, any of the following changes:
(1) The name of the organization;
(2) Ownership;
(3) The location of the organization;
Page 5-8 of 36
Civil Aviation Regulations Part 5
(4) Additional locations of the organization
(5) The housing, facilities, equipment, tools, material, procedures, work scope and certifying staff that
could affect the AMO rating or ratings;
(6) The ratings held by the AMO holder, whether granted by the CAAV or held through an AMO
certification issued by another contracting State;
(7) The accountable manager; or
(8) The list of management personnel identified as described in the maintenance procedure manual.
(b) CAAV will amend the AMO certificate within 7 working days AMO holder notifies the CAAV of a amendment
referred to in (1), (2), (3), (4), (5), (7) and (8) of subparagraph (a) of this Section.
(c) When CAAV issues an amendment to an AMO certificate because of new ownership of the AMO, the
CAAV will assign a new certificate number to the amended AMO certificate.
(d) CAAV may prescribe, in writing, the conditions under which the AMO holder may continue to operate during
any period of implementation of the changes noted in sub paragraph (b) of this Section.
(e) Hold the AMO certificate in abeyance if the CAAV determines that approval of the AMO certificate should
be delayed; CAAV will notify the AMO holder, in writing, of the reasons for any such delay.
(f) CAAV will notify the AMO holder, in writing, of the reasons for any such delay.
5.067 OPERATIONS PLAN
(a) AMO must have a planning system of human resource, equipment, material, maintenance data and hangar
to ensure safe completion of maintenance work, in accordance with the volume and complexity level of
maintenance work.
(b) The work division and work shift organization must take into account the limited human capacity.
Note: See Appendix 1 to 5.067 for requirements for scheduling of the workforce.
(c)If there is a change of maintenance team, the relevant information must be exchanged properly
between the two teams to ensure the delivery of information related to aircraft maintenance
5.070 EXTENDING AMO CERTIFICATE
(a) An AMO holder shall apply for renewal of the certificate and ratings 30 working days preceding the expiry
date of their.
(b) Application for approval AMO certificate must include:
(1) An application in a form and manner prescribed by CAAV;
(2) Maintenance procedures manual in duplicate;
(3) A list of the maintenance functions to be performed for aircraft regiter3ed in Vietnam;
(4) Any additional information that CAAV requests.
(c) Application for renewal AMO approval certificate must be sent in person or by post to CAAV. Except that
applications must be original and other documents are copies.
(d) CAAV checks the validity of the dossier within 3 working days from the date of receipt of application; notice
in person or in writing to the applicant if the application is denied.
(e) In case that application is accepted, within 7 working days from the date of receiving the dossier, CAAV
reviews profile content, givve approval and official notification inspection plan to AMO.
(f) Within 20 days from the date of receipt, CAAV extends AMO approval certificate if the staff, housing,
records, maintenance capacity and quality of performed work meet the provisions of this Subpart, or notice
renewal refusal in writing, stating the reasons.The CAAV will renew an AMO certificate and ratings within
15 working days of receipt of application, if the CAAV determines the AMO holder’s personnel, facilities.
records, and recent maintenance ability and quality meet the requirements.
Page 5-9 of 36
Civil Aviation Regulations Part 5
SUBPART E: ADMINISTRATION
5.080 APPLICABILITY
(a) This subpart prescribes the general requirements that are applicable to the on-going administration of an
Approved Maintenance Organisation.
5.083 MANAGEMENT PERSONNEL REQUIRED FOR AMO ORGANIZATIONS
(a) The AMO holder shall have an identified accountable manager, acceptable to the CAAV, who has
corporate authority for ensuring that the organization is in compliance with the requirements for an AMO.
(b) The AMO holder shall have identified qualified personnel, with proven competency in civil aviation,
available and serving in the following positions or their equivalent:
(1) Base Maintenance Manager;
(2) Line Maintenance Manager;
(3) Workshop Manager
(4) Quality Assurance Manager. who is responsible for the promotion of safety policies.
Refer to Appendix 1 to 5.083 for the management responsibilities.
Note: "The capacity of civil aviation" means that the individual must have the technical knowledge
and management experience that CAAV-approved for the position.
(c) The CAAV may approve positions or numbers of positions, other than those listed, if the AMO holder is able
to show that it can perform the operation with the highest degree of safety under the direction of fewer or
different categories of management personnel due to the:
(1) The kind of maintenance involved;
(2) The number and types of aircraft and components maintained; and
(3) Other complexities of operation.
5.085 ADVERTISING
(a) No maintenance organization may advertise as a AMO until a maintenance organization certificate has
been issued to that facility.
(b) No AMO holder may make any statement, either in writing or orally, about itself that is false or is designed
to mislead any person.
(c) Whenever the advertising of a maintenance organization indicates that it is certificated, the advertisement
must clearly state the maintenance organization’s certificate number.
5.087 MAINTENANCE ORGANIZATION PROCEDURES MANUAL
(a) The maintenance organization shall provide for the use and guidance of maintenance personnel concerned 6-I:8.7.2.1
a procedures manual containing the contents prescribed by the CAAV.
(b) The maintenance organization shall ensure that the procedures manual is amended as necessary to keep 6-I:8.7.2.2
the information contained therein up-to-date.
(c) The Maintenance Organization Procedure Manual and any subsequent amendments thereto shall be
approved by the CAAV prior to use.
(d) The maintenance organization shall furnish this manual and all amendments promptly to all organizations :8.7.2.3
or persons accomplishing any activity for which the manual applies.
(e) The Maintenance Organization Procedures Manual shall specify the scope of work required of the AMO in
order to satisfy the relevant requirements needed for an approval of an aircraft or aircraft component for
maintenance release.
(f) The procedures manual and any other manual it identifies must:
Page 5-10 of 36