Materials Science & Engineering A, Structural Materials: Properties, Microstructure and Processing 1992: Vol A159 Index

6 Pages·1992·1.4 MB·English

Materials Science and Engineering, A159 (1992) 285
Author Index of Volume 159
Adeva, P., 103 Huang, J. L., 127 Needleman, A., 1
Akselsen, O. M., 187 Hussain, H., 261 Nesbit, S., L9
Arsenault, R. J.,L13 Numi, I., 253
Atrens, A., 243 Janecek, M., 143 Nutt, G. L., 135
Jimenez, J. A., 103
Balik, J., 143 Jones, K. W., 275 Obara, K., 173
Banerjee, D., 73 Okada, T., L1
Banko, A., L9 Kesten, M., 35 Okumiya, M., 253
Bardal, A., 119 Kettunen, P., 167
Baskes, M. I., 1 Khan, A. Q., 261 Prangnell, P. B., 51
Bayerlein, M., 35 Khan, M. A., 261
Bennet, D., L9 King, W. E., 135 Robinson, J. M., 159
Biberger, M., 181 Koberna, M., 231 Rodriguez, P., 199
Brown, S. K., 111 Krawitz, A. D.,L13 Ruano, O. A., 103
Kulik, T., 95 Ruuskanen, P., 167
Cho, K. M., 151 Kwon, D., 151
Saimoto, S., L13
Clarke, P., L13
Latanision, R. M., 87 Shaw, M. P., 159
Craft, A., L9
Lavernia, E. J., 237 Shen, P., 267
Cristina, M. C., 103
Lee, J. C., 43 Shew, B. Y., 127
Lee, S., 151 Shi, N., L13
Davidson, M. J., 181
Lukac¢, P., 143 Siddiqui, T. N., 261
Smith, L. F., L13
Eliezer D., 237 Mandelis, A., 111 Solovioff, G., 237
Mannan, S. L., 199 Sowers, S., L9
Fiala, J., 231
Mannik, L., 111 Stobbs, W. M., 51
Filip, P., L5
Mathew, M. D., 199 Subramanian, K. N., 43
Flinn, J. E., 276
Mazanec, K., L5 Sumi, Y., 193
Meier, B., 35
Gogia, A. K., 73 Monzen, R., 193 Tanimura, S., L1
Gotoh, K., 253 Mori, T., 193 Thomas, J. P., 205, 223
Grong, @., 187 Mughrabi, H., 35 Tian-Chi, M., 111
Mukai, T., L1 Tsunekawa, Y., 253
Habiby, F., 261 Mukherjee, A. K., 181
Hanada, S., 173 Munidasa, M., 111 Wei, R. P., 205, 223
ul Haq, A., 261 Muraleedharan, K., 73 Withers, P. J., 51
Higashi, K., L1 Murayama, Y., 173 Wolf, H., 199
Hoagland, R. G., 1
Hon, Y., 267 Nakamura, T., 253 Zhang, X., 243
Hsueh, C. H., 65 Nandy, T. K., 73 Zuo, Y., 87
Materials Science and Engineering, A159 (1992) 287-290
Subject Index of Volume 159
Alloys 3oron
dynamic recrystallization of Nb;Al produced from alloy characterization of rapidly solidified ultrahigh boron steels,
powder, 173 103
environment-induced cracking of two nickel base amorphous investigation of chemical reactions in TiB,/Si,N, composite,
alloys in acidic chloride solutions, 87 127
mechanical properties of the order-disorder alloy system the influence of Cu, Nb and Ta additions on crystallization of
Pd, _,.Mn, (x=0.1-0.2), L9 Fe-Si-B-based glasses, 95
non-destructive depth profiling of laser processed Zr-2.5Nb 3oundary nodes
alloy by infrared photothermal radiometry, 111 microscopic observation of suppression of grain boundary
the effect of heat treatment and Nb content on the room sliding by boundary nodes and steps, 193
temperature tensile properties and microstructure of
Ti,AI-Nb alloys, 73
the influence of specimen geometry on the Portevin- Calzirtite
Le Chatelier effect in an Al-Mg alloy, 159 precipitation and solidification of calzirtite in liquid phase
very high strain rate superplasticity in mechanically alloyed sintered ZrO, (10.8 mol.% CaO) with TiO, additions, 267
IN9052 aluminium alloy, L1 Carbon
Aluminium hydrogen effects in (AI-Ti)-SiC particle metal matrix com-
dynamic recrystallization of Nb3Al produced from alloy posites, 237
powder, 173 wettability and interfacial reaction products in the AlSiMg—
effect of cold rolling on the tensile properties of (Al,O;)p/Al surface oxidized SiC system, 119
composites, 43 Charpy V notch
hydrogen effects in (AI-Ti)-SiC particle metal matrix com- prediction of weld metal Charpy V notch toughness, 187
posites, 237 Chloride
intermetallic phases in cold welded Al-Cu joints, 231 environment-induced cracking of two Ni base amorphous
synthesis of iron aluminide matrix in situ composites from alloys in acidic chloride solutions, 87
elemental powders by reactive low pressure plasma spray- Cold rolling
ing, 253 effect of cold rolling on the tensile properties of (Al,0;),/Al
the effect of heat treatment and Nb content on the room composites, 43
temperature tensile properties and microstructure of Cold welding
Ti,Al-Nb alloys, 73 intermetallic phases in cold welded Al-Cu joints, 231
the influence of specimen geometry on the Portevin- Composites
Le Chatelier effect in an Al-Mg alloy, 159 considerations in the use of yield asymmetries for the analysis
very high strain rate superplasticity in mechanically alloyed of internal stresses in MMCs, 51
IN9052 aluminium alloy, L1 effect of cold rolling on the tensile properties of (Al,O;),/Al
wettability and interfacial reaction products in the AlSiMg— composites, 43
surface oxidized SiC system, 119 interfacial debonding and fiber pull-out stresses of fiber-
Amorphous alloys reinforced composites
environment-induced cracking of two nickel base amorphous VIII: the energy-based debonding criterion, 65
alloys in acidic chloride solutions, 87 investigation of chemical reactions in TiB,/Si,N, composite,
Aqueous solutions 127
corrosion fatigue crack growth of steels in aqueous solutions synthesis of iron aluminide matrix in situ composites from
I: Experimental results and modeling the effects of fre- elemental powders by reactive low pressure plasma spray-
quency and temperature, 205 ing, 253
corrosion fatigue crack growth of steels in aqueous solutions Copper
II: Modeling the effects of AK, 223 intermetallic phases in cold welded Al—Cu joints, 231
Austenite the influence of Cu, Nb and Ta additions on crystallization of
improvement of the strength of a metastable austenitic stain- Fe-Si-B-based glasses, 95
less steel by cyclic deformation-induced martensitic trans- Corrosion
formation at 103 K, 35 corrosion fatigue crack growth of steels in aqueous solutions
I: Experimental results and modeling the effects of fre-
Bond strength quency and temperature, 205
comments on the bond strength measurements of Gupta and corrosion fatigue crack growth of steels in aqueous solutions
co-workers, 135 II: Modeling the effects of AK, 223
288
Crack growth prediction of matrix-particle interfacial separation in particle-
corrosion fatigue crack growth of steels in aqueous solutions strengthened materials, 151
I: Experimental results and modeling the effects of fre- wettability and interfacial reaction products in_ the
quency and temperature, 205 AISiMg-surface oxidized SiC system, 119
corrosion fatigue crack growth of steels in aqueous solutions Intermetallics
II: Modeling the effects of AK, 223 intermetallic phases in cold welded Al—Cu joints, 231
Cracking summary report: computational issues in the mechanical
environment-induced cracking of two Ni base amorphous behavior of metals and intermetallics, 1
alloys in acidic chloride solutions, 87 Iron
Creep dislocation arrangements in a-iron loaded cyclically in a
prediction of creep parameters of type 316 stainless steel constant magnetic field, 167
under service conditions using the @-projection concept, synthesis of iron aluminide matrix in situ composites from
199 elemental powders by reactive low pressure plasma spray-
Cyclic deformation ing, 253
improvement of the strength of a metastable austenitic stain- the influence of Cu, Nb and Ta additions on crystallization of
less steel by cyclic deformation-induced martensitic trans- Fe-Si-B-based glasses, 95
formation at 103 K, 35
Cyclic loading
Laser processing
dislocation arrangements in a-iron loaded cyclically in a
non-destructive depth profiling of laser processed Zr-2.5Nb
constant magnetic field, 167
alloy by infrared photothermal radiometry, 111
Debonding
Magnesium
interfacial debonding and fiber pull-out stresses of fiber-
the influence of specimen geometry on the Portevin-Le
reinforced composites
Chatelier effect in an Al-Mg alloy, 159
VIII: the energy-based debonding criterion, 65 wettability and interfacial reaction products in_ the
Depth profiling
AISiMg-surface oxidized SiC system, 119
non-destructive depth profiling of laser processed Zr-2.5Nb
Magnetic field
alloy by infrared photothermal radiometry, 111
dislocation arrangements in a-iron loaded cyclically in a
Dislocation
constant magnetic field, 167
dislocation arrangements in a-iron loaded cyclically in a
Manganese
constant magnetic field, 167
mechanical properties of the order-disorder alloy system
Dislocation glide Pd, _,Mn, (x=0.1-0.2), L9
dislocation glide and multiple slip, 143
Maraging steel
machine-induced phase transformation in a maraging steel,
261
Fatigue
corrosion fatigue crack growth of steels in aqueous solutions Martensite
improvement of the strength of a metastable austenitic stain-
I; Experimental results and modeling the effects of fre-
quency and temperature, 205 less steel by cyclic deformation-induced martensitic trans-
corrosion fatigue crack growth of steels in aqueous solutions formation at 103 K, 35
II: Modeling the effects of AK, 223 Matrix separation
Fibre reinforcement prediction of matrix—particle interfacial separation in particle-
interfacial debonding and fiber pull-out stresses of fiber- strengthened materials, 151
reinforced composites Mechanical alloying
very high strain rate superplasticity in mechanically alloyed
VIII: the energy-based debonding criterion, 65
IN9052 aluminium alloy, L1
Melt spinning
Glasses
rapid solidification characteristics in melt spinning, 243
the influence of Cu, Nb and Ta additions on crystallization of Metal matrix composites
Fe-Si-B-based glasses, 95
considerations in the use of yield asymmetries for the analysis
Grain boundary sliding
of internal stresses in MMCs, 51
microscopic observation of suppression of grain boundary
hydrogen effects in (AIl-Ti)-SiC particle metal matrix com-
sliding by boundary nodes and steps, 193
posites, 237
residual stresses in discontinuous metal matrix composites,
Heat treatment L13
the effect of heat treatment and Nb content on the room Metals
temperature tensile properties and microstructure of summary report: computational issues in the mechanical
Ti;Al-Nb alloys, 73 behavior of metals and intermetallics, 1
Hydrogen Multiple slips
hydrogen effects in (Al-Ti)-SiC particle metal matrix com- dislocation glide and multiple slip, 143
posites, 237
Nickel
Interfaces environment-induced cracking of two Ni base amorphous
interfacial debonding and fiber pull-out stresses of fiber- alloys in acidic chloride solutions, 87
reinforced composites on the evaluation of the reactive stress in TiNi shape memory
VIII: the energy-based debonding criterion, 65 alloys, L5
289
Niobium wettability and interfacial reaction products in_ the
dynamic recrystallization of Nb,Al produced from alloy AISiMg-surface oxidized SiC system, 119
powder, 173 Solidification
non-destructive depth profiling of laser processed Zr-2.5Nb precipitation and solidification of calzirtite in liquid phase
alloy by infrared photothermal radiometry, 111 sintered ZrO, (10.8 mol.% CaO) with TiO, additions, 267
stress reduction tests on Nb-1wt.%Zr at 1300 K, 181 Stainless steel
the effect of heat treatment and Nb content on the room improvement of the strength of a metastable austenitic stain-
temperature tensile properties and microstructure of less steel by cyclic deformation-induced martensitic trans-
Ti,AI-Nb alloys, 73 formation at 103 K, 35
Nitrogen prediction of creep parameters of type 316 stainless steel
investigation of chemical reactions in TiB,/Si,N, composite, under service conditions using the 6-projection concept,
127 199
Notch toughness Steel
prediction of weld metal Charpy V notch toughness, 187 corrosion fatigue crack growth of steels in aqueous solutions
I: Experimental results and modeling the effects of fre-
quency and temperature, 205
Oxygen
effect of cold rolling on the tensile properties of (Al,O;),/Al corrosion fatigue crack growth of steels in aqueous solutions
II: Modeling the effects of AK, 223
composites, 43
precipitation and solidification of calzirtite in liquid phase Steels
characterization of rapidly solidified ultrahigh boron steels,
sintered ZrO, (10.8 mol.% CaO) with TiO, additions, 267
103
Strain rate
Palladium
very high strain rate superplasticity in mechanically alloyed
mechanical properties of the order-disorder alloy system
IN9052 aluminium alloy, L1
Pd, _ .Mn, (x=0.1-0.2), L9
Stress
Particle separation
consideration in the use of yield asymmetries for the analysis
prediction of matrix—particle interfacial separation in particle-
of internal stresses in MMCs, 51
strengthened materials, 151
interfacial debonding and fiber pull-out stresses of fiber-
Particle strength
reinforced composites
prediction of matrix—particle interfacial separation in particle-
VIII: the energy-based debonding criterion, 65
strengthened materials, 151
on the evaluation of the reactive stress in TiNi shape memory
Phase transformations
alloys, L5
machine-induced phase transformation in a maraging steel,
residual stresses in discontinuous metal matrix composites,
261
L13
Photothermal radiometry
stress reduction tests on Nb-1wt.%Zr at 1300 K, 181
non-destructive depth profiling of laser processed Zr-2.5Nb
Superplasticity
alloy by infrared photothermal radiometry, 111
very high strain rate superplasticity in mechanically alloyed
Plasma spraying
IN9052 aluminium alloy, L1
synthesis of iron aluminide matrix in situ composites from
elemental powders by reactive low pressure plasma spray-
ing, 253
Tantalum
Powders
the influence of Cu, Nb and Ta additions on crystallization of
dynamic recrystallization of Nb3;Al produced from alloy
Fe-Si-B-based glasses, 95
powder, 173
Tensile properties
Precipitation
the effect of heat treatment and Nb content on the room
precipitation and solidification of calzirtite in liquid phase
temperature tensile properties and microstructure of
sintered ZrO, (10.8 mol.% CaO) with TiO, additions, 267
Ti,Al-Nb alloys, 73
Tensiles
Rapid solidification effect of cold rolling on the tensile properties of (Al,O;),/Al
characterization of rapidly solidified ultrahigh boron steels, composites, 43
103
6-projection concept
rapid solidification characteristics in melt spinning, 243 prediction of creep parameters of type 316 stainless steel
Recrystallization under service conditions using the @-projection concept,
dynamic recrystallization of Nb;Al produced from alloy 199
powder, 173 Titanium
hydrogen effects in (AI-Ti)-SiC particle metal matrix com-
Shape memory alloys posites, 237
on the evaluation of the reactive stress in TiNi shape memory investigation of chemical reactions in TiB,/Si,;N, composite,
alloys, L5 127
Silicon on the evaluation of the reactive stress in TiNi shape memory
hydrogen effects in (AIl-Ti)-SiC particle metal matrix com- alloys, L5
posites, 237 precipitation and solidification of calzirtite in liquid phase
investigation of chemical rections in TiB,/Si,N, composite, sintered ZrO, (10.8 mol.% CaO) with TiO, additions, 267
127 the effect of heat treatment and Nb content on the room
the influence of Cu, Nb and Ta additions on crystallization of temperature tensile properties and microstructure of
Fe-Si-B-based glasses, 95 Ti,Al-Nb alloys, 73
290
Type 316 stainless steel Yield asymmetries
prediction of creep parameters of type 316 stainless steel considerations in the use of yield asymmetries for the analysis
under service conditions using the @-projection concept, of internal stresses in MMCs, 51
199
Zirconium
Weld metals non-destructive depth profiling of laser processed Zr-2.5Nb
prediction of weld metal Charpy V notch toughness, 187 alloy by infrared photothermal radiometry, 111
Wettability precipitation and solidification of calzirtite in liquid phase
wettability and interfacial reaction products in the AlSiMg- sintered ZrO, (10.8 mol.% CaO) with TiO, additions, 267
surface oxidized SiC system, 119 stress reduction tests on Nb-1wt.%Zr at 1300 K, 181