Table Of Content

Journal of Materials Processing Technology 177 (2006) 713-715 www.elsevier.com locate jmatprotec Author Index of Volume 177 Abe, Y., 417 Castellucci, M., 626 Forcellese, A., 323, 373 Adeyemi, M.B., 608 Ceretti, E., 409, 672 Foster, A.D., 497 Agnew, S.R., 483 Cerro, I., 404 Franchitti, S., 95 Ahmadimehr, B., 179 Chamekh, A., 307 Fratini, L., 340, 344, 364 Ajiboye, J.S., 608 Chang, C.-C., 138 Frolish, M.F., 36 Alexandrov, S., 159 Chastel, Y., 202 Fuentes, G.G., 644 Allwood, J.M., 630 Chatti, S., 2 Fujimoto, H., 676 Almeida, B.P.P., 183 Chen, C.-F., 104 Fujimoto, K., 639 Alves, M.L., 183 Chen, D.-C., 104 Fujiwara, T., 534 Ambrogio, G., 413 Chen, F.-K., 142, 146 Fukaura, K., 356 Amouei, A.M., 274 Chen, J., 72, 382 Anahid, M., 53 Cheng, H.-Y., 98, 138 Gabrielli, F., 323, 373 Andrade Pires, F.M., 278 Cleary, P.W., 41 Gahbiche, A., 307 Aoki, L., 649 Contorno, D., 364 Gelin, J.C., 348, 352, 433, 697 Arana, J., 404 Contri, C., 672 Ghiotti, A., 396 Asakawa, M., 534, 570, 704 César de Sa, J.M.A., 278 Giardini, C., 409, 672 Astapov, V.Y., 274 Giraud-Moreau, L., 224 Attanasio, A., 409 Danckert, J., 426, 692 Giuliano, G., 95 Aubin, J.-L., 188 Date, P-P., 81, 439 Glisic, D., 386 Avelar-Batista, J.C., 644 de Santi Jr., N., 300 Gontarz, A., 214, 228, 550 de Souza Neto, E.A., 300 Gonzalez, C., 175, 304 Bakhshi-Jooybari, M., 596, 612 Dean, T.A., 497, 530 Gorji, A., 596, 612 Banaszek, G., 238, 582 Degischer, H.P., 473 Gracio, J.J., 377 Barcellona, A., 340 Deltombe, R., 505 Gronostajski, Z., 448 Barriére, T., 352 Desai, $.G., 439 Gu, R., 197 Bartnicki, J., 167 Deshmukh, P., 87 Gu, R.J., 192 Bate, P.S., 91 Diaz de Cerio, M.J., 644 Guo, L., 634 Bay, N., 509 Di Lorenzo, R., 315 Bednarek, S., 210 Dodok, R., 386 Ha, J., 41 Beerwald, C., 266 Donati, L., 344 Hale, P., 461 BelHadjSalah, H., 307 Dover, S., 91 Hama, T., 676 Berski, S., 582 Downes, A., 319 Hamada, T., 570 Beynon, J.H., 36 Du, R., 84 Hambli, R., 287, 307 Blicharski, M., 555 Dubar, L., 505 Han, J., 233 Blum, H., 270 Dubar, M., 505 Harada, Y., 356 Boillat, E., 348 Dubois, A., 505 Hartley, P., 1, 319, 617 Boman, R., 621 Dyja, H., 493, 566, 582 Hashimoto, S.-I., 390 Bouchard, P.-O., 202 He, Z., 680 Boudeau, N., 348, 433 Edwards, L., 311 Heo, S.C., 653, 658 Brooks, J.W., 311 El-Wahabi, M., 469 Higgs, C.F., 87 Broomhead, P., 331 Endelt, B., 426 Hirt, G., 360 Brosius, A., 401 Engel, U., 206 Hodgson, P.D., 456 Bruni, C., 323, 373 English, M., 626 Hong, S.H., 134 Bruschi, S., 396 Ewers, R., 401 Hosseini, A.H., 261 Buffa, G., 340, 344 Hosseini Mehraban, S.E., 274 Bui, Q.V., 621 Farhat-Nia, F., 525 Hosseinipour, S.J., 596 Farrugia, D.C.J., 486, 497, 513 Hotta, M., 639 Cabrera, J.M., 469 Farzin, M., 287 Housden, J., 644 Caillet, N., 202 Fatehi-Sichani, F., 478 Hoya, N., 570 Cairney, J., 639 Fereshteh-Saniee, F., 261, 478 Hsiao, Y.-H., 150 Camacho, A.M., 304 Ferreira, J.A., 377 Hsu, H.-H., 150 Carrino, L., 95 Filice, L., 364, 413 Hsu, Y.-C., 154 Elsevier B.V. doi: 10. 1016/S0924-0 13 6(06 OS80-2 714 Author Index of Volume 177 Huang, L., 197 Lodej, B., 188 Pater, Z., 167, 214, 550 Huang, M.N., 114 Long, H., 591 Perfilov, V., 218 Huang, T.-B., 142 Lou, X.Y., 483 Petrov, P., 218 Huang, Y., 84 Lovell, M., 87, 539, 545 Phelan, P., 701 Huart, S., 505 Lu, C., 233 Pietrzyk, M., 1, 296 Luksza, J., 555 Polt, P., 282 lizuka, T., 368 Ponthot, J.P., 621 Ingarao, G., 315 Maciol, P., 68 Popovic, M., 386 Ishiguro, M., 444 Mahshid, R., 179 Prado, J.M., 469 Maidagan, E., 404 Prakash, M., 41 JaSkiewicz, K., 448 Majta, J., 1, 456, 461 Psyk, V., 266 Javadi, M., 247 Maki, S., 444 Putz, A., 206 Javani, H.R., 287 Makino, H., 444 Jiang, Z.Y., 121, 126, 130, 163, 233 Manninen, T., 600, 604 Qi, J., 680 Jolly, M., | Maranda, A., 582 Qin, Y., 8, 644 Jovanovic, D., 386 Marcos, M., 175 Martins, P.A.F., 49, 183 Rainforth, W.M., 36 Kajino, S., 704 Marumo, Y., 243, 251, 709 Ramsay, P., 600, 604 Kamalapurkar, R.L., 81 Mashayekhi, M., 287, 291 Ratuszek, W., 555 Kang, B.S., 653, 658 Mashhadi, M.M., 684 Richardson, A., 513 Kao, Y.-C., 98, 138 Math, M.D., 256 Ridley, N., 91 Karayel, D., 327 Matsuzaki, K., 534 Rist, M.A., 311 Kashani Zadeh, H., 684 McAllen, P.J., 701 Rivero, A., 404 Kasuga, Y., 76 McDonald, D., 513 Rodriguez, P.P., 404 Katajarinne, T., 600, 604 Merklein, M., 452 Rodriguez, R., 644 Kato, T., 417 Micari, F., 315, 364, 413 Romhanji, E., 386 Kawada, K., 539, 545 Milenin, A., 561 Rosa, P.A.R., 183 Kazanecki, J., 167 Miller, D.B., 501 Ruan, L., 243, 251 Keran, Z., 256 Minami, A., 251 Rubio, E.M., 175, 304 Khademizadeh, H., 617 Mino, T., 534 Rif, G., 282 Khoddam, S., 465 Minton, T., 336 Khoei, A.R., 53, 58 Mitsche, S., 282 Khoroshko, L.L., 274 Mobley, A., 87 Saanouni, K., 19 Khoury, I., 224 Montmitonnet, P., 188 Saboori, M., 596, 612 Kijima, H., 509 Mori, K., 63, 417 Sadlowska, H., 663 Kim, J., 653, 658 Mori, K.-L., 444 Sagrado, R.C., 368 Klaus, A., 2, 266 Morikawa, K., 639 Saiki, H., 243, 251, 709 Kleiner, M., 2, 266, 401, 587 Morooka, T., 243 Sajedinejad, A., 179 Klimmek, C., 401 Morrow, C., 539, 545 Salimi, M., 517, 525, 575 Kobayashi, H., 649 Moslemi Naeini, H., 179, 617 Salmani Tehrani, M.S., 617 Kobayashi, M., 534 Movahhedy, M.R., 525 Saniei, M., 575 Kocanda, A., 663 Mroz, S., 493, 561 Santos, A.D., 278 Kolosov, S., 348 Mukai, Y., 390 Sasada, M., 649 Kopp, R., 360 Mulyadi, M., 311 Schikorra, M., 587 Koyama, H., 639 Muramatsu, T., 390 Sebastiani, G., 401 Krahn, M., 360 Muszka, K., 456, 461 Sebastian, M.A., 175, 304 Kristensen, B.E., 692 Myllykoski, P., 422 Shahim, K., 53 Krzyzanowski, M., 36 Mynors, D.J., 331, 336, 626 Shakeri, M., 596 Kulon, J., 331 Shamloo, A., 53 Kurisu, K., 676 Nakano, S., 639 She, C.-H., 98, 138 Sheppard, T., 26 Labergére, C., 224, 697 Namoco Jr., C.S., 368 Shercliff, H.R., 501 Lafon, P., 224 Niang, K., 188 Sheu, J.-J. 109 Lan, F., 72, 382 Nielsen, K.B., 426, 692 Shizuma, O., 251 Lang, L., 692 Nikbakht, M., 58 Sidjanin, L., 256 Lechler, J., 452 Nishitake, H., 709 Simoncini, M., 323, 373 Lee, D., 534 Noorani-Azad, M., 612 Siticzak, J.. 210 Levkovitch, V., 430 Nowaczewski, J., 582 Skakun, P., 256 Li, H., 192 Skubisz, P.. 210 Li, M., 483 Ohkubo, T., 676 Skunca, M., 256 Li, Q., 539, 545 Okada, T., 570 Sleboda, T., 461 Li, T., 692 Otomo, Y., 63 Sombolestan, M., 517 Liaghat, G.H., 179 Or7kan, S.S., 327 Sommitsch, C., 282 Lin, J., 1, 72, 382, 497, 530 Song, J 2 Liu, B., 352 Palmeri, D., 340 Song, W.J., 658 Liu, G., 688 Pan, S.C., 114 Spain, E., 644 Liu, X.H., 121 Papeleux, L., 621 Stanistreet, T.F., 630 Lo, Z.Y., 84 Paszyriski, M., 68 Stebunov, S., 218 Author Index of Volume 177 Stefanik, A., 238, 493 Tsai, Y.-A., 142 Weroriski, W., 550 Stiemer, M., 270 Tsuchida, N., 356 Weroriski, W.S., 214 Stockinger, M., 473 Turetta, A., 396 Willoughby, A.M., 630 Sugimoto, K.-L., 390 Tzou, G.-Y., 114, 150, 159 Wright, R.N., 461 Sun, P., 377 Sun, Z., 634 Ueda, H., 570 Xie, H.B., 121 Sun, Z.C., 171 Uemura, T., 709 Xiong, S., 49 Sutcliffe, M.P.F., 501 Unger, J., 270 Svendsen, B., 270, 430 Urankar, S., 539, 545 Syu, S.W., 114 Urban, M., 360 Yamaguchi, K., 368 Szeliga, D., 296 Usachev, E.V., 274 Yang, C.-H., 109 Yang, H., 171, 192, 197, 634 Szota, P., 566 Utsunomiya, H., 501, 521 Yang, M., 639 Tajdari, M., 247, 274 Vahedi, K., 179 Yang, T.-S., 154 Takakura, N., 368 Vansteenkiste, G., 348 Yoon, J.W., 134 Takasu, I., 521 Vaz Jr., M., 300 Yoshimura, H., 63 Takuda, H., 676 Verran, G.O., 300 Yotsumoto, T., 709 Tang, J., 126 Yuan, S., 668, 680, 688 Tatsuda, S.1., 243 Wagner, K., 206 Yuan, W., 668 Teixeira, P., 278 Wagoner, R.H., 483 Teng, B., 688 Wang, F., 530 Zhan, M., 192, 197, 634 Thibaud, S., 433, 697 Wang, G.D., 121 Zhan, Z.H., 243 Thomas, A., 469 Wang, J., 430 Zhang, B., 91 Tieu, A.K., 121, 126, 139, 163, 233 Wang, X., 668 Zhou, T.-G., 163 Tomesani, L., 344 Warchomicka, F., 473 Zhou, X., 692 Trebacz, L., 296 Wei, D., 233 Zhu, H.T., 130 Trull, M., 513 Wei, D.B., 130 Zhu, Q., 530 Tsai, J.-W., 146 Wen, J.L., 163 Ziaei-Rad, S., 291 Materials Technology Journal of Materials Processing Technology 177 (2006) 716-729 www.elsevier.com locate jmatprotec Subject Index of Volume 177 ABAQUS 6061 aluminum alloy Research on the influence of material properties on cold ring rolling Thermo-mechanical treatment using resistance heating for processes by 3D-FE numerical simulation, 634 production of fine grained heat-treatable aluminum alloy Accumulated fluence sheets, 444 Homogeneity aspects in selective laser sintering (SLS), 348 Aluminum stamping Adaptive method Close loop control of a hydraulic press for springback analysis, 377 Investigation on determination of loading path to enhance formability Aluminum tube in tube hydroforming process using APDL, 653 An experimental investigation into the formability of hydroforming Additional shear strain layer 5A02 Al-tubes at elevated temperature, 680 Effect of “additional shear strain layer” on tensile strength and Analytical model microstructure of fine drawn wire, 704 Analysis of flash formation in continuous rotary extrusion of copper, Adhesive joint 600 Embedding of a circular plate into a thin plate by shear joining and its Anisotropy joint strength, 76 Quantitative analysis of the impact of forging operations on fatigue AFS pioperties of steel components, 202 Forming of aluminum foam sandwich panels: Numerical simulations Finite element prediction of ductile fracture in sheet metal forming and experimental tests, 364 processes, 278 Al deposited film Modeling and simulation of directional hardening in metals during Deformation analysis of Au wire bonding, 709 non-proportional loading, 430 ALE formulation APDL Application of the Arbitrary Lagrangian Eulerian formulation to the Investigation on determination of loading path to enhance formability numerical simulation of cold roll forming process, 621 in tube hydroforming process using APDL, 653 Al-Mg-Cu sheet Artificial intelligence Effect of annealing temperature on the formability of AI-Mg4.5—Cu0.5 On the use of artificial intelligence tools for fracture forecast in cold alloy sheets, 386 forming operations, 315 Alpha phase morphology Artificial neural networks Quantitative analysis of the microstructure of near B titanium alloy Inverse identification using the bulge test and artificial neural networks, during compression tests, 473 307 Aluminium alloy sheet On the use of artificial intelligence tools for fracture forecast in cold Joinability of aluminium alloy and mild steel sheets by self piercing forming operations, 315 rivet, 417 Using an artificial neural network to assist roll design in cold roll- Thermo-mechanical treatment using resistance heating for forming processes, 319 production of fine grained heat-treatable aluminum alloy Modelling of the rheological behaviour of aluminium alloys in multistep sheets, 444 hot deformation using the multiple regression analysis and artificial Aluminium alloys neural network techniques, 323 A method to produce aluminum alloy tube busbars by continuous Assembly casting-expansion extrusion, 163 TRIP steel: Plastic behaviour modelling and influence on functional Prevention of lap formation in near net shape isothermal forging behaviour, 433 technology of part of irregular shape made of aluminium alloy Assignment to CPUs A92618, 218 Parallel processing of 3D rigid-plastic finite element method using Experimental investigation of roughening of the matt surface in pack diagonal matrix, 63 rolling, 501 Asymmetrical rolling Optimized decision of the exact material modes in the simulation for Elasto-plastic finite element simulation of asymmetrical plate rolling the innovative sheet hydroforming method, 692 using an ALE approach, 525 Aluminium transfer At elevated temperature Investigation on the sliding of aluminium thin foils against PVD-coated An experimental investigation into the formability of hydroforming carbide forming-tools during micro-forming, 644 SA02 Al-tubes at elevated temperature, 680 Aluminum Austenite A new experimental procedure of evaluating the friction coefficient in Texture evolution and variations of a-phase volume fraction in elastic and plastic regions, 247 cold-rolled AISI 301 steel strip, 555 Utilisation of engineering workshop equipment for friction stir Manufacture of magnetic scaling rod with transformation-induced welding, 336 plasticity, 570 Elsevier B.V. doi: 10.1016/S0924-0 13 6(06)0058 1-4 Subject Index of Volume 177 AZ31 CAD/CAE/CAM integration Forgeability of Mg—Al—Zn magnesium alloys in hot and warm closed Development of an integrated CAD/CAE/CAM system on taper-tipped die forging, 210 thread-rolling die-plates, 98 AZ61 CAD-CAM design Forgeability of Mg—Al-Zn magnesium alloys in hot and warm closed Optimization of tool path in two points incremental forming, 409 die forging, 210 CAE Twin-roll strip casting of AZ61 magnesium alloy and improvement of A simplified column model for the automatic design of the stamping formability by structure-control rolling, 534 die structure, 109 Cap plasticity 22mnB5 The extended finite element method (X-FEM) for powder forming Investigation of the thermo-mechanical properties of hot stamping problems, 53 steels, 452 Center porosity Backward cup extrusion Application of hydrostatic integration parameter for free-forging and Quantitative evaluation of dimensional errors of formed components rolling, 521 in cold backward cup extrusion, 591 Central burst Backward extrusion Influence of geometrical conditions on central burst appearance in Experimental and numerical study of optimum die profile in backward axisymmetrical drawing processes, 304 rod extrusion, 596 Circular tube section Experimental and numerical study of energy consumption in forward Localized edge buckling in cold roll-forming of circular tube section, and backward rod extrusion, 612 617 Banitic ferrite Closed die forging Formability of Nb bearing ultra high-strength TRIP-aided sheet steels, The effects of flash allowance and bar size on forming load and metal 390 flow in closed die forging, 261 Bar size Closed loop control systems The effects of flash allowance and bar size on forming load and metal New framework for on-line feedback control of a deep-drawing flow in closed die forging, 261 operation, 426 Bending Closed-die forging workability Air bending of AZ31 magnesium alloy in warm and hot forming Forgeability of Mg—Al-Zn magnesium alloys in hot and warm closed conditions, 373 die forging, 210 Bimetal CNC machine Analysis of quality of bimetallic rod after extrusion process, 582 Theoretical and experimental analysis of the dieless incremental sheet Blank design forming process, 404 An integrated numerical technique in determining blank shape for Cockroft—Latham criterion netshape sheet metal forming, 72 The application of the inverse method for determination of slitting Blanking criterion parameter during the multi slit rolling (MSR) process, Analysis of blanking process using various damage criteria, 287 493 Bloom position Coefficient Experimental investigation of the spatial variation in viscoplastic A new experimental procedure of evaluating the friction coefficient in response of free-machining steels in hot rolling conditions, 497 elastic and plastic regions, 247 Bond rolling Coiling temperature Analysis of asymmetrical cold and hot bond rolling of unbounded Prediction of coiling temperature on run-out table of hot strip mill clad sheet under constant shear friction, 114 using data mining, 121 Bondability Cold forging Deformation analysis of Au wire bonding, 709 Improvement of tool life in cold forging by locally optimized surfaces, Bonding conditions 206 Deformation analysis of Au wire bonding, 709 Cold formability Bonding point Formability of Nb bearing ultra high-strength TRIP-aided sheet steels, Analysis of asymmetrical cold and hot bond rolling of unbounded 390 clad sheet under constant shear friction, 114 Cold ring rolling Boundary lubrication Research on the influence of material properties on cold ring rolling Development of a mixed film lubrication model in cold rolling, 575 processes by 3D-FE numerical simulation, 634 Buckling Cold roll-forming Experimental and numerical investigation of restoration behavior of Analysis of deformation behaviour of the large diameter pipe by sheet metals subjected to bulging deformation, 368 U-O bending process, 179 Bulge test Using an artificial neural network to assist roll design in cold Inverse identification using the bulge test and artificial neural roll-forming processes, 319 networks, 307 Localized edge buckling in cold roll-forming of circular tube section, Bulging 617 Experimental and numerical investigation of restoration behavior of Application of the Arbitrary Lagrangian Eulerian formulation to the sheet metals subjected to bulging deformation, 368 numerical simulation of cold roll forming process, 621 Bulging deformation Eco-efficiency of the cold roll formed product supply chain, 626 Study on the bulging deformation of the porous metal in upsetting, 154 Cold rolling Bulk forming Texture evolution and variations of a-phase volume fraction in On the use of artificial intelligence tools for fracture forecast in cold cold-rolled AISI 301 steel strip, 555 forming operations, 315 Development of a mixed film lubrication model in cold rolling, 575 Bursting failure Compact tension Investigation on determination of loading path to enhance formability Identification and validation of a ductile damage model for A533 in tube hydroforming process using APDL, 653 steel, 291 718 Subject Index of Volume 177 Composite Crack growth Simulation of welding chamber conditions for composite profile On the modelling of the interaction of materials softening and ductile extrusion, 587 damage during hot working of Alloy 80A, 282 Composite wire Analysis of blanking process using various damage criteria, 287 Experimental analysis of drawn composite wire, 701 Crack initiation Compression On the modelling of the interaction of materials softening and ductile An upper bound solution for a solid viscous cylinder subject to damage during hot working of Alloy 80A, 282 compression and twist, 159 Analysis of blanking process using various damage criteria, Forming behavior of magnesium sheet, 483 287 Compression test Identification and validation of a ductile damage model for A533 An investigation on determination of flow curves at room temperature steel, 291 and under forming conditions, 478 Crash Computer aided optimisation TRIP steel: Plastic behaviour modelling and influence on functional Numerical research and optimisation of high pressure sheet metal behaviour, 433 forming of tailor rolled blanks, 360 Critical friction Computer modeling Development of a critical friction model for cross wedge rolling hollow A physical based modeling approach for the dynamic behavior of shafts, 539 ultrafine grained structures, 456 Cross-wedge rolling Computer simulation Establishment of failure conditions for the cross-wedge rolling of hollow New framework for on-line feedback control of a deep-drawing shafts, 545 operation, 426 Cross-wedge rolling by means of one flat wedge and two shaped rolls, Conductivity 550 Characterisation of extruded magnesium profiles for electromagnetic Crown joining, 266 An approach to analyse the special rolling of thin strip, 130 Confidence limit Crystal orientation Parameter optimisation in constitutive equations for hot forging, 311 Effect of “additional shear strain layer” on tensile strength and Constitutive equation microstructure of fine drawn wire, 704 High temperature deformation of Inconel 718, 469 Crystal subdivision Constitutive model Effect of “additional shear strain layer” on tensile strength and Parameter optimisation in constitutive equations for hot forging, 311 microstructure of fine drawn wire, 704 Constitutive parameters Cylinder Variations of effective length of the hot torsion test specimen with An upper bound solution for a solid viscous cylinder subject to deformation, 465 compression and twist, 159 Contact condition Evaluation of contact conditions in hot forging of pure aluminum Damage using ultrasonic examination, 243 Virtual metal forming including the ductile damage occurrence. Contact friction Actual state of the art and main perspectives, 19 Contact friction modeling with the extended finite element method Finite element prediction of ductile fracture in sheet metal forming (X-FEM), 58 processes, 278 Contact ratio On the modelling of the interaction of materials softening and ductile Evaluation of contact conditions in hot forging of pure aluminum damage during hot working of Alloy 80A, 282 using ultrasonic examination, 243 Damage measurement Continuous expansion extrusion Identification and validation of a ductile damage model for A533 A method to produce aluminum alloy tube busbars by continuous steel, 29] casting-expansion extrusion, 163 Damage mechanics Continuous extrusion Numerical and experimental assessment of ductile fracture in tensile Analysis of flash formation in continuous rotary extrusion of copper, and compressive-dominant processes, 300 600 Data mining Continuous rotary extrusion Prediction of coiling temperature on run-out table of hot strip mill Numerical simulation of flash formation in continuous rotary extrusion using data mining, 121 of copper, 604 Deep-drawing Coordinate measuring machine Finite element analysis and formability of non-isothermal deep drawing A study on the computer-aided measuring integration system for the of AZ31B sheets, 142 sheet metal stamping die, 138 New framework for on-line feedback control of a deep-drawing Corner forming operation, 426 Analysis of thinning at the transition corner in tube hydroforming, Deformation analysis 688 Deformation analysis of Au wire bonding, 709 Correction factor Deformation history An investigation on determination of flow curves at room temperature Analysis of deformation behaviour of the large diameter pipe by and under forming conditions, 478 U-O bending process, 179 Correlations Investigation on preformed shape design to improve formability in Sensitivity analysis of quantitative fracture criterion based on the results tube hydroforming process using FEM, 658 of the SICO test, 296 Design of experiment Coulomb friction On the quantification of strain distribution in drawn sheet metal products, Energetic analysis of tube drawing processes with fixed plug by upper 439 bound method, 175 Diagonal matrix Crack Parallel processing of 3D rigid-plastic finite element method using A study on crack healing in 1045 steel, 233 diagonal matrix, 63 Subject Index of Volume 177 Die casting Electromagnetic forming processes Novel applications of smoothed particle hydrodynamics (SPH) in Multifield modeling of electromagnetic metal forming processes, 270 metal forming, 41 Electromagnetic joining Die design Characterisation of extruded magnesium profiles for electromagnetic A knowledge-based engineering design tool for metal forging, 331 joining, 266 Die diagnosis End forming of tubes A study on the computer-aided measuring integration system for the End forming of thin-walled tubes, 183 sheet metal stamping die, 138 Energy consumption Die filling Power optimization of common breaking-down sequences in shape The effects of flash allowance and bar size on forming load and metal rolling, 517 flow in closed die forging, 261 Experimental and numerical study of energy consumption in forward Die land length and backward rod extrusion, 612 Upper bound analysis of die land length in cold extrusion, 608 Enrichment function Die semiangle The extended finite element method (X-FEM) for powder forming Influence of geometrical conditions on central burst appearance in problems, 53 axisymmetrical drawing processes, 304 Environmentally friendly Die structure design automation Increasing formability in sheet metal stamping operations using A simplified column model for the automatic design of the stamping environmentally friendly lubricants, 87 die structure, 109 Eulerian Dimensional errors Elasto-plastic finite element simulation of asymmetrical plate rolling Quantitative evaluation of dimensional errors of formed components using an ALE approach, 525 in cold backward cup extrusion, 591 Experimental tests Direct extrusion Tube-hydroforming experiments on an Al 7003 extruded tube, 672 Analysis of quality of bimetallic rod after extrusion process, 582 Experimentation Directional hardening End forming of thin-walled tubes, 183 Modeling and simulation of directional hardening in metals during Experiments non-proportional loading, 430 Three dimensional thermo-mechanical simulation of the tube forming DLC coating process in Diescher’s mill, 167 Fabrication of dies in micro-scale for micro-sheet metal forming, Cross-wedge rolling by means of one flat wedge and two shaped rolls, 550 639 Extended FEM Drawing processes The extended finite element method (X-FEM) for powder forming Influence of geometrical conditions on central burst appearance in problems, 53 axisymmetrical drawing processes, 304 Contact friction modeling with the extended finite element method Drilling (X-FEM), 58 Embedding of a circular plate into a thin plate by shear joining and its Extrusion joint strength, 76 Prediction of structure during shaped extrusion and subsequent static Ductile damage recrystallisation during the solution soaking operation, 26 Identification and validation of a ductile damage model for A533 Novel applications of smoothed particle hydrodynamics (SPH) in steel, 291 metal forming, 41 Ductile fracture Solid state bonding in extrusion and FSW: Process mechanics and On the use of artificial intelligence tools for fracture forecast in cold analogies, 344 forming operations, 315 Simulation of welding chamber conditions for composite profile Dynamic recrystallisation extrusion, 587 On the modelling of the interaction of materials softening and ductile Extrusion pressure damage during hot working of Alloy 80A, 282 Upper bound analysis of die land length in cold extrusion, 608 EBSD FE analysis On the modelling of the interaction of materials softening and ductile Advanced finite element modelling of plate rolling operations, 513 damage during hot working of Alloy 80A, 282 FE model validation Effect of “additional shear strain layer” on tensile strength and Tube-hydroforming experiments on an Al 7003 extruded tube, 672 microstructure of fine drawn wire, 704 FE simulation Eccentric shaft An integrated numerical technique in determining blank shape for net- The research of forging process of eccentric part on three slide forging shape sheet metal forming, 72 press, 214 A method of constructing smooth tool surfaces for FE prediction of Eco-efficiency springback in sheet metal forming, 382 Eco-efficiency of the cold roll formed product supply chain, 626 TRIP steel: Plastic behaviour modelling and influence on functional Effective length behaviour, 433 Variations of effective length of the hot torsion test specimen with FEA deformation, 465 Virtual metal forming including the ductile damage occurrence. Elastic—plastic dynamic explicit FEM Actual state of the art and main perspectives, 19 Research on the influence of material properties on cold ring rolling FEA simulation processes by 3D-FE numerical simulation, 634 An approach to process limitations in hydroforming of X-joints as Elasto-plastic based on formability evaluation, 663 Novel applications of smoothed particle hydrodynamics (SPH) in FEM metal forming, 41 Prediction of structure during shaped extrusion and subsequent static Electrical resistivity recrystallisation during the solution soaking operation, 26 A method to produce aluminum alloy tube busbars by continuous Development of an integrated CAD/CAE/CAM system on taper-tipped casting-expansion extrusion, 163 thread-rolling die-plates, 98 720 Subject Index of Volume 177 Investigation of a slab method analysis and FEM simulation on rotating Finite element simulation compression forming of ring, 150 Modelling of oxide scale surface roughness in hot metal forming, 126 Free deformation mechanism and change of forming mode in tube Numerical research and optimisation of high pressure sheet metal inversion under conical die, 171 forming of tailor rolled blanks, 360 Prevention of lap formation in near net shape isothermal forging Joinability of aluminium alloy and mild steel sheets by self piercing technology of part of irregular shape made of aluminium alloy rivet, 417 A92618, 218 Cold rolling of galvanized strips: A new approach to the evaluation of Theoretical and laboratory modelling of the closure of metallurgical zinc fines formation, 505 defects during forming of a forging, 238 Localized edge buckling in cold roll-forming of circular tube section, Forming of aluminum foam sandwich panels: Numerical simulations 617 and experimental tests, 364 Analysis of thinning at the transition corner in tube hydroforming, 688 Numerical investigation on dynamic effects during sheet metal Finite elements spinning by explicit finite-element-analysis, 401 Optimisation of the superplastic forming of aluminium alloys, 91 Theoretical and experimental analysis of the dieless incremental sheet Finite element analysis and formability of non-isothermal deep drawing forming process, 404 of AZ31B sheets, 142 Using forming simulations to improve mechanical simulation accuracy, Accelerated 3D FEM computation of the mechanical history of the 422 metal deformation in cold pilgering of tubes, 188 The application of the inverse method for determination of slitting Finite element prediction of ductile fracture in sheet metal forming criterion parameter during the multi slit rolling (MSR) process, processes, 278 493 Numerical and experimental assessment of ductile fracture in tensile Elasto-plastic finite element simulation of asymmetrical plate rolling and compressive-dominant processes, 300 using an ALE approach, 525 Inverse identification using the bulge test and artificial neural networks, Cross-wedge rolling by means of one flat wedge and two shaped rolls, 307 550 Power optimization of common breaking-down sequences in shape Numerical modelling of the metal flow and stock bending during the rolling, 517 rolling of unequal angle bar, 561 Establishment of failure conditions for the cross-wedge rolling of hollow Numerical modelling of the metal flow during the rolling process of shafts, 545 the round screw-ribbed bar in the finishing pass, 566 Application of the Arbitrary Lagrangian Eulerian formulation to the Numerical simulation of flash formation in continuous rotary extrusion numerical simulation of cold roll forming process, 621 of copper, 604 Finite-element-analysis Finite element simulation and experiment in tube hydroforming of A study of size effect in micro-forming with micro-hardness tests, unequal T shapes, 684 146 FEM analysis Study on the bulging deformation of the porous metal in upsetting, Three dimensional thermo-mechanical simulation of the tube forming 154 process in Diescher’s mill, 167 Improvement of tool life in cold forging by locally optimized surfaces, FEM simulation 206 Forming process of valve drop forging with three cavities, 228 Quantitative evaluation of dimensional errors of formed components The research of forging process of eccentric part on three slide forging in cold backward cup extrusion, 591 press, 214 Fixed inner plug Experimental and numerical investigation of restoration behavior of Energetic analysis of tube drawing processes with fixed plug by upper sheet metals subjected to bulging deformation, 368 bound method, 175 Finite elasto-viscoplasticity Flash Virtual metal forming including the ductile damage occurrence. Analysis of flash formation in continuous rotary extrusion of copper, Actual state of the art and main perspectives, 19 600 Finite Element Method Numerical simulation of flash formation in continuous rotary extrusion Application of the fully automatic 3D hp adaptive code to orthotropic of copper, 604 heat transfer in structurally graded material properties, 68 Flash allowance Modelling the free forming of superplastic Pb—Sn60 at constant pressure, The effects of flash allowance and bar size on forming load and metal 95 flow in closed die forging, 261 Modeling of aluminum alloy sheets based on new anisotropic yield Flexibility functions, 134 The design of a flexible model ring rolling machine, 630 End forming of thin-walled tubes, 183 Flow behavior Relations between numerical simulation and experiment in closed die Investigation of the thermo-mechanical properties of hot stamping forging of a gear, 256 steels, 452 Multifield modeling of electromagnetic metal forming processes, 270 Flow curves New framework for on-line feedback control of a deep-drawing Quantitative analysis of the microstructure of near B titanium alloy operation, 426 during compression tests, 473 Modelling of skinpass rolling by elasto-plastic analysis of plane strain Flow modelling upsetting, 509 Modelling of the rheological behaviour of aluminium alloys in multistep Development of a critical friction model for cross wedge rolling hollow hot deformation using the multiple regression analysis and artificial shafts, 539 neural network techniques, 323 Simulation of welding chamber conditions for composite profile Flow stress extrusion, 587 A study of size effect in micro-forming with micro-hardness tests, Study on piercing mechanism of small holes, 649 146 Formability of tube hydroforming under various loading paths, 676 Influence of sequence and simultaneous deformation on behavior of Finite element rolling simulation CuSi3.5 silicon bronze, 448 Application of hydrostatic integration parameter for free-forging and A physical based modeling approach for the dynamic behavior of rolling, 521 ultrafine grained structures, 456 Subject Index of Volume 177 721 Fluid flows Free deformation Modelling and process control for the hydroforming of metallic liners Free deformation mechanism and change of forming mode in tube used for hydrogen storage, 697 inversion under conical die, 171 Foams Free forging Forming of aluminum foam sandwich panels: Numerical simulations Theoretical and laboratory modelling of the closure of metallurgical and experimental tests, 364 defects during forming of a forging, 238 Force monitoring Free-machining steel A force measuring based strategy for failure prevention in incremental Experimental investigation of the spatial variation in viscoplastic forming, 413 response of free-machining steels in hot rolling conditions, 497 Forging Friction Novel applications of smoothed particle hydrodynamics (SPH) in A new experimental procedure of evaluating the friction coefficient in metal forming, 41 elastic and plastic regions, 247 Quantitative analysis of the impact of forging operations on fatigue An investigation on determination of flow curves at room temperature properties of steel components, 202 and under forming conditions, 478 A knowledge-based engineering design tool for metal forging, 331 Friction factor Forging load Prevention of lap formation in near net shape isothermal forging The effects of flash allowance and bar size on forming load and metal technology of part of irregular shape made of aluminium alloy flow in closed die forging, 261 A92618, 218 Formability Friction stir welding Increasing formability in sheet metal stamping operations using Utilisation of engineering workshop equipment for friction stir environmentally friendly lubricants, 87 welding, 336 Finite element analysis and formability of non-isothermal deep drawing On microstructural phenomena occurring in friction stir welding of of AZ31B sheets, 142 aluminium alloys, 340 Characterisation of extruded magnesium profiles for electromagnetic FSW joining, 266 Solid state bonding in extrusion and FSW: Process mechanics and Effect of annealing temperature on the formability of Al-Mg4.5—Cu0.5 analogies, 344 alloy sheets, 386 Investigation on preformed shape design to improve formability in Geometric parameters tube hydroforming process using FEM, 658 Towards an optimisation of forging processes using geometric param- Forming eters, 224 Forming of axisymmetric tubes under the influence of impulse-magnetic Grain refinement field and computer simulation of the process, 274 A physical based modeling approach for the dynamic behavior of TRIP steel: Plastic behaviour modelling and influence on functional ultrafine grained structures, 456 behaviour, 433 Grain size Forming limit Prediction of microstructural evolution in hot rolling, 530 Twin-roll strip casting of AZ61 magnesium alloy and improvement of Gurson damage model formability by structure-control rolling, 534 Analysis of blanking process using various damage criteria, 287 An approach to process limitations in hydroforming of X-joints as based on formability evaluation, 663 Hall—Petch relationship Forming machine The possibilities of mechanical property control in fine grained struc- Micro-forming and miniature manufacturing systems — development tures, 461 needs and perspectives, 8 Hard roller burnishing Forming mode Improvement of tool life in cold forging by locally optimized surfaces, Free deformation mechanism and change of forming mode in tube 206 inversion under conical die, 171 Hardening Forming process design Joining and shaping fit of dissimilar materials by shot peening, On the use of artificial intelligence tools for fracture forecast in cold 356 forming operations, 315 Healing Forming processes A study on crack healing in 1045 steel, 233 Parallel processing of 3D rigid-plastic finite element method using Heat treatment diagonal matrix, 63 Thermo-mechanical treatment using resistance heating for production Towards an optimisation of forging processes using geometric of fine grained heat-treatable aluminum alloy sheets, 444 parameters, 224 High cycle multiaxial fatigue Forming tool Quantitative analysis of the impact of forging operations on fatigue Investigation on the sliding of aluminium thin foils against PVD-coated properties of steel components, 202 carbide forming-tools during micro-forming, 644 High strain rate Forward extrusion A physical based modeling approach for the dynamic behavior of Experimental and numerical study of energy consumption in forward ultrafine grained structures, 456 and backward rod extrusion, 612 High strength steels Fracture Investigation of 22MnBS5 formability in hot stamping operations, 396 An approach to process limitations in hydroforming of X-joints as Investigation of the thermo-mechanical properties of hot stamping based on formability evaluation, 663 steels, 452 Fracture criteria High temperature damage Sensitivity analysis of quantitative fracture criterion based on the Prediction and avoidance of high temperature damage in long product results of the SICO test, 296 hot rolling, 486 Free cutting steels Hollow shafts Prediction and avoidance of high temperature damage in long product Development of a critical friction model for cross wedge rolling hollow hot rolling, 486 shafts, 539 722 Subject Index of Volume 177 Hot deformation Initial conditions Quantitative analysis of the microstructure of near B titanium alloy Using forming simulations to improve mechanical simulation accuracy, during compression tests, 473 422 Hot forging Integral shapes Evaluation of contact conditions in hot forging of pure aluminum Using an artificial neural network to assist roll design in cold roll-form- using ultrasonic examination, 243 ing processes, 319 Effects of simulation conditions on evaluation of tool temperature in Intelligent agent system hot extrusion-forging, 251 Distributed multi-agent system approach for sheet metal forming, 327 Hot forming Internal defects High temperature deformation of Inconel 718, 469 Establishment of failure conditions for the cross-wedge rolling of hollow Hot rolling shafts, 545 Oxide scale behaviour on aluminium and steel under hot working Internal high pressure forming conditions, 36 Effect of wrinkling behavior on formability and thickness distribution Experimental investigation of the spatial variation in viscoplastic in tube hydroforming, 668 response of free-machining steels in hot rolling conditions, 497 Inverse method Prediction of microstructural evolution in hot rolling, 530 The application of the inverse method for determination of slitting Numerical modelling of the metal flow during the rolling process of criterion parameter during the multi slit rolling (MSR) process, 493 the round screw-ribbed bar in the finishing pass, 566 Inverse modelling Hot stamping Optimized decision of the exact material modes in the simulation for Investigation of 22MnB5 formability in hot stamping operations, 396 the innovative sheet hydroforming method, 692 Investigation of the thermo-mechanical properties of hot stamping lon beam irradiation steels, 452 Fabrication of dies in micro-scale for micro-sheet metal forming, 639 Hot strip mill Isothermal forming Prediction of coiling temperature on run-out table of hot strip mill Prevention of lap formation in near net shape isothermal forging using data mining, 121 technology of part of irregular shape made of aluminium alloy Hot torsion test A92618, 218 Variations of effective length of the hot torsion test specimen with deformation, 465 Joining hp adaptivity Joining and shaping fit of dissimilar materials by shot peening, 356 Application of the fully automatic 3D hp adaptive code to orthotropic Joinability of aluminium alloy and mild steel sheets by self piercing heat transfer in structurally graded material properties, 68 rivet, 417 Hydroforming Joint strength Numerical research and optimisation of high pressure sheet metal Embedding of a circular plate into a thin plate by shear joining and its forming of tailor rolled blanks, 360 joint strength, 76 An approach to process limitations in hydroforming of X-joints as based on formability evaluation, 663 Knowledge based system Effect of wrinkling behavior on formability and thickness distribution A knowledge-based engineering design tool for metal forging, 331 in tube hydroforming, 668 An experimental investigation into the formability of hydroforming Lagrangian 5A02 Al-tubes at elevated temperature, 680 Elasto-plastic finite element simulation of asymmetrical plate rolling Modelling and process control for the hydroforming of metallic liners using an ALE approach, 525 used for hydrogen storage, 697 Large deformation Hydrostatic integration Application of the Arbitrary Lagrangian Eulerian formulation to the Application of hydrostatic integration parameter for free-forging and numerical simulation of cold roll forming process, 621 rolling, 521 Modeling and simulation of directional hardening in metals during Hydrostatic stress non-proportional loading, 430 Influence of geometrical conditions on central burst appearance in Large diameter axisymmetrical drawing processes, 304 A new method to accurately obtain wrinkling limit diagram in NC bending process of thin-walled tube with large diameter under Identification different loading paths, 192 Inverse identification using the bulge test and artificial neural networks, Large-scale 3D simulation 307 Parallel processing of 3D rigid-plastic finite element method using Image processing diagonal matrix, 63 Close loop control of a hydraulic press for springback analysis, Laser beam 377 Manufacture of magnetic scaling rod with transformation-induced Inclusions experimental mechanical testing plasticity, 570 Prediction and avoidance of high temperature damage in long product Laser beam treating hot rolling, 486 Improvement of tool life in cold forging by locally optimized surfaces, Inconel 718 206 High temperature deformation of Inconel 718, 469 Latham and Cockcroft Incremental forming Sensitivity analysis of quantitative fracture criterion based on the Theoretical and experimental analysis of the dieless incremental sheet results of the SICO test, 296 forming process, 404 Lead A force measuring based strategy for failure prevention in incremental An investigation on determination of flow curves at room temperature forming, 413 and under forming conditions, 478 Incremental sheet metal spinning Lightweight component Numerical investigation on dynamic effects during sheet metal spinning Analysis of thinning at the transition corner in tube hydroforming, by explicit finite-element-analysis, 401 688

ebook img

Journal of Materials Processing Technology 2006: Vol 177 Index PDF

2006·4 MB·English
by  
#periodicals #sim_microfilm #pub_journal-of-materials-processing-technology
Save to my drive
Quick download
Download
Upgrade Premium
Most books are stored in the elastic cloud where traffic is expensive. For this reason, we have a limit on daily download.

Preview Journal of Materials Processing Technology 2006: Vol 177 Index

Journal of Materials Processing Technology 177 (2006) 713-715 www.elsevier.com locate jmatprotec Author Index of Volume 177 Abe, Y., 417 Castellucci, M., 626 Forcellese, A., 323, 373 Adeyemi, M.B., 608 Ceretti, E., 409, 672 Foster, A.D., 497 Agnew, S.R., 483 Cerro, I., 404 Franchitti, S., 95 Ahmadimehr, B., 179 Chamekh, A., 307 Fratini, L., 340, 344, 364 Ajiboye, J.S., 608 Chang, C.-C., 138 Frolish, M.F., 36 Alexandrov, S., 159 Chastel, Y., 202 Fuentes, G.G., 644 Allwood, J.M., 630 Chatti, S., 2 Fujimoto, H., 676 Almeida, B.P.P., 183 Chen, C.-F., 104 Fujimoto, K., 639 Alves, M.L., 183 Chen, D.-C., 104 Fujiwara, T., 534 Ambrogio, G., 413 Chen, F.-K., 142, 146 Fukaura, K., 356 Amouei, A.M., 274 Chen, J., 72, 382 Anahid, M., 53 Cheng, H.-Y., 98, 138 Gabrielli, F., 323, 373 Andrade Pires, F.M., 278 Cleary, P.W., 41 Gahbiche, A., 307 Aoki, L., 649 Contorno, D., 364 Gelin, J.C., 348, 352, 433, 697 Arana, J., 404 Contri, C., 672 Ghiotti, A., 396 Asakawa, M., 534, 570, 704 César de Sa, J.M.A., 278 Giardini, C., 409, 672 Astapov, V.Y., 274 Giraud-Moreau, L., 224 Attanasio, A., 409 Danckert, J., 426, 692 Giuliano, G., 95 Aubin, J.-L., 188 Date, P-P., 81, 439 Glisic, D., 386 Avelar-Batista, J.C., 644 de Santi Jr., N., 300 Gontarz, A., 214, 228, 550 de Souza Neto, E.A., 300 Gonzalez, C., 175, 304 Bakhshi-Jooybari, M., 596, 612 Dean, T.A., 497, 530 Gorji, A., 596, 612 Banaszek, G., 238, 582 Degischer, H.P., 473 Gracio, J.J., 377 Barcellona, A., 340 Deltombe, R., 505 Gronostajski, Z., 448 Barriére, T., 352 Desai, $.G., 439 Gu, R., 197 Bartnicki, J., 167 Deshmukh, P., 87 Gu, R.J., 192 Bate, P.S., 91 Diaz de Cerio, M.J., 644 Guo, L., 634 Bay, N., 509 Di Lorenzo, R., 315 Bednarek, S., 210 Dodok, R., 386 Ha, J., 41 Beerwald, C., 266 Donati, L., 344 Hale, P., 461 BelHadjSalah, H., 307 Dover, S., 91 Hama, T., 676 Berski, S., 582 Downes, A., 319 Hamada, T., 570 Beynon, J.H., 36 Du, R., 84 Hambli, R., 287, 307 Blicharski, M., 555 Dubar, L., 505 Han, J., 233 Blum, H., 270 Dubar, M., 505 Harada, Y., 356 Boillat, E., 348 Dubois, A., 505 Hartley, P., 1, 319, 617 Boman, R., 621 Dyja, H., 493, 566, 582 Hashimoto, S.-I., 390 Bouchard, P.-O., 202 He, Z., 680 Boudeau, N., 348, 433 Edwards, L., 311 Heo, S.C., 653, 658 Brooks, J.W., 311 El-Wahabi, M., 469 Higgs, C.F., 87 Broomhead, P., 331 Endelt, B., 426 Hirt, G., 360 Brosius, A., 401 Engel, U., 206 Hodgson, P.D., 456 Bruni, C., 323, 373 English, M., 626 Hong, S.H., 134 Bruschi, S., 396 Ewers, R., 401 Hosseini, A.H., 261 Buffa, G., 340, 344 Hosseini Mehraban, S.E., 274 Bui, Q.V., 621 Farhat-Nia, F., 525 Hosseinipour, S.J., 596 Farrugia, D.C.J., 486, 497, 513 Hotta, M., 639 Cabrera, J.M., 469 Farzin, M., 287 Housden, J., 644 Caillet, N., 202 Fatehi-Sichani, F., 478 Hoya, N., 570 Cairney, J., 639 Fereshteh-Saniee, F., 261, 478 Hsiao, Y.-H., 150 Camacho, A.M., 304 Ferreira, J.A., 377 Hsu, H.-H., 150 Carrino, L., 95 Filice, L., 364, 413 Hsu, Y.-C., 154 Elsevier B.V. doi: 10. 1016/S0924-0 13 6(06 OS80-2 714 Author Index of Volume 177 Huang, L., 197 Lodej, B., 188 Pater, Z., 167, 214, 550 Huang, M.N., 114 Long, H., 591 Perfilov, V., 218 Huang, T.-B., 142 Lou, X.Y., 483 Petrov, P., 218 Huang, Y., 84 Lovell, M., 87, 539, 545 Phelan, P., 701 Huart, S., 505 Lu, C., 233 Pietrzyk, M., 1, 296 Luksza, J., 555 Polt, P., 282 lizuka, T., 368 Ponthot, J.P., 621 Ingarao, G., 315 Maciol, P., 68 Popovic, M., 386 Ishiguro, M., 444 Mahshid, R., 179 Prado, J.M., 469 Maidagan, E., 404 Prakash, M., 41 JaSkiewicz, K., 448 Majta, J., 1, 456, 461 Psyk, V., 266 Javadi, M., 247 Maki, S., 444 Putz, A., 206 Javani, H.R., 287 Makino, H., 444 Jiang, Z.Y., 121, 126, 130, 163, 233 Manninen, T., 600, 604 Qi, J., 680 Jolly, M., | Maranda, A., 582 Qin, Y., 8, 644 Jovanovic, D., 386 Marcos, M., 175 Martins, P.A.F., 49, 183 Rainforth, W.M., 36 Kajino, S., 704 Marumo, Y., 243, 251, 709 Ramsay, P., 600, 604 Kamalapurkar, R.L., 81 Mashayekhi, M., 287, 291 Ratuszek, W., 555 Kang, B.S., 653, 658 Mashhadi, M.M., 684 Richardson, A., 513 Kao, Y.-C., 98, 138 Math, M.D., 256 Ridley, N., 91 Karayel, D., 327 Matsuzaki, K., 534 Rist, M.A., 311 Kashani Zadeh, H., 684 McAllen, P.J., 701 Rivero, A., 404 Kasuga, Y., 76 McDonald, D., 513 Rodriguez, P.P., 404 Katajarinne, T., 600, 604 Merklein, M., 452 Rodriguez, R., 644 Kato, T., 417 Micari, F., 315, 364, 413 Romhanji, E., 386 Kawada, K., 539, 545 Milenin, A., 561 Rosa, P.A.R., 183 Kazanecki, J., 167 Miller, D.B., 501 Ruan, L., 243, 251 Keran, Z., 256 Minami, A., 251 Rubio, E.M., 175, 304 Khademizadeh, H., 617 Mino, T., 534 Rif, G., 282 Khoddam, S., 465 Minton, T., 336 Khoei, A.R., 53, 58 Mitsche, S., 282 Khoroshko, L.L., 274 Mobley, A., 87 Saanouni, K., 19 Khoury, I., 224 Montmitonnet, P., 188 Saboori, M., 596, 612 Kijima, H., 509 Mori, K., 63, 417 Sadlowska, H., 663 Kim, J., 653, 658 Mori, K.-L., 444 Sagrado, R.C., 368 Klaus, A., 2, 266 Morikawa, K., 639 Saiki, H., 243, 251, 709 Kleiner, M., 2, 266, 401, 587 Morooka, T., 243 Sajedinejad, A., 179 Klimmek, C., 401 Morrow, C., 539, 545 Salimi, M., 517, 525, 575 Kobayashi, H., 649 Moslemi Naeini, H., 179, 617 Salmani Tehrani, M.S., 617 Kobayashi, M., 534 Movahhedy, M.R., 525 Saniei, M., 575 Kocanda, A., 663 Mroz, S., 493, 561 Santos, A.D., 278 Kolosov, S., 348 Mukai, Y., 390 Sasada, M., 649 Kopp, R., 360 Mulyadi, M., 311 Schikorra, M., 587 Koyama, H., 639 Muramatsu, T., 390 Sebastiani, G., 401 Krahn, M., 360 Muszka, K., 456, 461 Sebastian, M.A., 175, 304 Kristensen, B.E., 692 Myllykoski, P., 422 Shahim, K., 53 Krzyzanowski, M., 36 Mynors, D.J., 331, 336, 626 Shakeri, M., 596 Kulon, J., 331 Shamloo, A., 53 Kurisu, K., 676 Nakano, S., 639 She, C.-H., 98, 138 Sheppard, T., 26 Labergére, C., 224, 697 Namoco Jr., C.S., 368 Shercliff, H.R., 501 Lafon, P., 224 Niang, K., 188 Sheu, J.-J. 109 Lan, F., 72, 382 Nielsen, K.B., 426, 692 Shizuma, O., 251 Lang, L., 692 Nikbakht, M., 58 Sidjanin, L., 256 Lechler, J., 452 Nishitake, H., 709 Simoncini, M., 323, 373 Lee, D., 534 Noorani-Azad, M., 612 Siticzak, J.. 210 Levkovitch, V., 430 Nowaczewski, J., 582 Skakun, P., 256 Li, H., 192 Skubisz, P.. 210 Li, M., 483 Ohkubo, T., 676 Skunca, M., 256 Li, Q., 539, 545 Okada, T., 570 Sleboda, T., 461 Li, T., 692 Otomo, Y., 63 Sombolestan, M., 517 Liaghat, G.H., 179 Or7kan, S.S., 327 Sommitsch, C., 282 Lin, J., 1, 72, 382, 497, 530 Song, J 2 Liu, B., 352 Palmeri, D., 340 Song, W.J., 658 Liu, G., 688 Pan, S.C., 114 Spain, E., 644 Liu, X.H., 121 Papeleux, L., 621 Stanistreet, T.F., 630 Lo, Z.Y., 84 Paszyriski, M., 68 Stebunov, S., 218 Author Index of Volume 177 Stefanik, A., 238, 493 Tsai, Y.-A., 142 Weroriski, W., 550 Stiemer, M., 270 Tsuchida, N., 356 Weroriski, W.S., 214 Stockinger, M., 473 Turetta, A., 396 Willoughby, A.M., 630 Sugimoto, K.-L., 390 Tzou, G.-Y., 114, 150, 159 Wright, R.N., 461 Sun, P., 377 Sun, Z., 634 Ueda, H., 570 Xie, H.B., 121 Sun, Z.C., 171 Uemura, T., 709 Xiong, S., 49 Sutcliffe, M.P.F., 501 Unger, J., 270 Svendsen, B., 270, 430 Urankar, S., 539, 545 Syu, S.W., 114 Urban, M., 360 Yamaguchi, K., 368 Szeliga, D., 296 Usachev, E.V., 274 Yang, C.-H., 109 Yang, H., 171, 192, 197, 634 Szota, P., 566 Utsunomiya, H., 501, 521 Yang, M., 639 Tajdari, M., 247, 274 Vahedi, K., 179 Yang, T.-S., 154 Takakura, N., 368 Vansteenkiste, G., 348 Yoon, J.W., 134 Takasu, I., 521 Vaz Jr., M., 300 Yoshimura, H., 63 Takuda, H., 676 Verran, G.O., 300 Yotsumoto, T., 709 Tang, J., 126 Yuan, S., 668, 680, 688 Tatsuda, S.1., 243 Wagner, K., 206 Yuan, W., 668 Teixeira, P., 278 Wagoner, R.H., 483 Teng, B., 688 Wang, F., 530 Zhan, M., 192, 197, 634 Thibaud, S., 433, 697 Wang, G.D., 121 Zhan, Z.H., 243 Thomas, A., 469 Wang, J., 430 Zhang, B., 91 Tieu, A.K., 121, 126, 139, 163, 233 Wang, X., 668 Zhou, T.-G., 163 Tomesani, L., 344 Warchomicka, F., 473 Zhou, X., 692 Trebacz, L., 296 Wei, D., 233 Zhu, H.T., 130 Trull, M., 513 Wei, D.B., 130 Zhu, Q., 530 Tsai, J.-W., 146 Wen, J.L., 163 Ziaei-Rad, S., 291 Materials Technology Journal of Materials Processing Technology 177 (2006) 716-729 www.elsevier.com locate jmatprotec Subject Index of Volume 177 ABAQUS 6061 aluminum alloy Research on the influence of material properties on cold ring rolling Thermo-mechanical treatment using resistance heating for processes by 3D-FE numerical simulation, 634 production of fine grained heat-treatable aluminum alloy Accumulated fluence sheets, 444 Homogeneity aspects in selective laser sintering (SLS), 348 Aluminum stamping Adaptive method Close loop control of a hydraulic press for springback analysis, 377 Investigation on determination of loading path to enhance formability Aluminum tube in tube hydroforming process using APDL, 653 An experimental investigation into the formability of hydroforming Additional shear strain layer 5A02 Al-tubes at elevated temperature, 680 Effect of “additional shear strain layer” on tensile strength and Analytical model microstructure of fine drawn wire, 704 Analysis of flash formation in continuous rotary extrusion of copper, Adhesive joint 600 Embedding of a circular plate into a thin plate by shear joining and its Anisotropy joint strength, 76 Quantitative analysis of the impact of forging operations on fatigue AFS pioperties of steel components, 202 Forming of aluminum foam sandwich panels: Numerical simulations Finite element prediction of ductile fracture in sheet metal forming and experimental tests, 364 processes, 278 Al deposited film Modeling and simulation of directional hardening in metals during Deformation analysis of Au wire bonding, 709 non-proportional loading, 430 ALE formulation APDL Application of the Arbitrary Lagrangian Eulerian formulation to the Investigation on determination of loading path to enhance formability numerical simulation of cold roll forming process, 621 in tube hydroforming process using APDL, 653 Al-Mg-Cu sheet Artificial intelligence Effect of annealing temperature on the formability of AI-Mg4.5—Cu0.5 On the use of artificial intelligence tools for fracture forecast in cold alloy sheets, 386 forming operations, 315 Alpha phase morphology Artificial neural networks Quantitative analysis of the microstructure of near B titanium alloy Inverse identification using the bulge test and artificial neural networks, during compression tests, 473 307 Aluminium alloy sheet On the use of artificial intelligence tools for fracture forecast in cold Joinability of aluminium alloy and mild steel sheets by self piercing forming operations, 315 rivet, 417 Using an artificial neural network to assist roll design in cold roll- Thermo-mechanical treatment using resistance heating for forming processes, 319 production of fine grained heat-treatable aluminum alloy Modelling of the rheological behaviour of aluminium alloys in multistep sheets, 444 hot deformation using the multiple regression analysis and artificial Aluminium alloys neural network techniques, 323 A method to produce aluminum alloy tube busbars by continuous Assembly casting-expansion extrusion, 163 TRIP steel: Plastic behaviour modelling and influence on functional Prevention of lap formation in near net shape isothermal forging behaviour, 433 technology of part of irregular shape made of aluminium alloy Assignment to CPUs A92618, 218 Parallel processing of 3D rigid-plastic finite element method using Experimental investigation of roughening of the matt surface in pack diagonal matrix, 63 rolling, 501 Asymmetrical rolling Optimized decision of the exact material modes in the simulation for Elasto-plastic finite element simulation of asymmetrical plate rolling the innovative sheet hydroforming method, 692 using an ALE approach, 525 Aluminium transfer At elevated temperature Investigation on the sliding of aluminium thin foils against PVD-coated An experimental investigation into the formability of hydroforming carbide forming-tools during micro-forming, 644 SA02 Al-tubes at elevated temperature, 680 Aluminum Austenite A new experimental procedure of evaluating the friction coefficient in Texture evolution and variations of a-phase volume fraction in elastic and plastic regions, 247 cold-rolled AISI 301 steel strip, 555 Utilisation of engineering workshop equipment for friction stir Manufacture of magnetic scaling rod with transformation-induced welding, 336 plasticity, 570 Elsevier B.V. doi: 10.1016/S0924-0 13 6(06)0058 1-4 Subject Index of Volume 177 AZ31 CAD/CAE/CAM integration Forgeability of Mg—Al—Zn magnesium alloys in hot and warm closed Development of an integrated CAD/CAE/CAM system on taper-tipped die forging, 210 thread-rolling die-plates, 98 AZ61 CAD-CAM design Forgeability of Mg—Al-Zn magnesium alloys in hot and warm closed Optimization of tool path in two points incremental forming, 409 die forging, 210 CAE Twin-roll strip casting of AZ61 magnesium alloy and improvement of A simplified column model for the automatic design of the stamping formability by structure-control rolling, 534 die structure, 109 Cap plasticity 22mnB5 The extended finite element method (X-FEM) for powder forming Investigation of the thermo-mechanical properties of hot stamping problems, 53 steels, 452 Center porosity Backward cup extrusion Application of hydrostatic integration parameter for free-forging and Quantitative evaluation of dimensional errors of formed components rolling, 521 in cold backward cup extrusion, 591 Central burst Backward extrusion Influence of geometrical conditions on central burst appearance in Experimental and numerical study of optimum die profile in backward axisymmetrical drawing processes, 304 rod extrusion, 596 Circular tube section Experimental and numerical study of energy consumption in forward Localized edge buckling in cold roll-forming of circular tube section, and backward rod extrusion, 612 617 Banitic ferrite Closed die forging Formability of Nb bearing ultra high-strength TRIP-aided sheet steels, The effects of flash allowance and bar size on forming load and metal 390 flow in closed die forging, 261 Bar size Closed loop control systems The effects of flash allowance and bar size on forming load and metal New framework for on-line feedback control of a deep-drawing flow in closed die forging, 261 operation, 426 Bending Closed-die forging workability Air bending of AZ31 magnesium alloy in warm and hot forming Forgeability of Mg—Al-Zn magnesium alloys in hot and warm closed conditions, 373 die forging, 210 Bimetal CNC machine Analysis of quality of bimetallic rod after extrusion process, 582 Theoretical and experimental analysis of the dieless incremental sheet Blank design forming process, 404 An integrated numerical technique in determining blank shape for Cockroft—Latham criterion netshape sheet metal forming, 72 The application of the inverse method for determination of slitting Blanking criterion parameter during the multi slit rolling (MSR) process, Analysis of blanking process using various damage criteria, 287 493 Bloom position Coefficient Experimental investigation of the spatial variation in viscoplastic A new experimental procedure of evaluating the friction coefficient in response of free-machining steels in hot rolling conditions, 497 elastic and plastic regions, 247 Bond rolling Coiling temperature Analysis of asymmetrical cold and hot bond rolling of unbounded Prediction of coiling temperature on run-out table of hot strip mill clad sheet under constant shear friction, 114 using data mining, 121 Bondability Cold forging Deformation analysis of Au wire bonding, 709 Improvement of tool life in cold forging by locally optimized surfaces, Bonding conditions 206 Deformation analysis of Au wire bonding, 709 Cold formability Bonding point Formability of Nb bearing ultra high-strength TRIP-aided sheet steels, Analysis of asymmetrical cold and hot bond rolling of unbounded 390 clad sheet under constant shear friction, 114 Cold ring rolling Boundary lubrication Research on the influence of material properties on cold ring rolling Development of a mixed film lubrication model in cold rolling, 575 processes by 3D-FE numerical simulation, 634 Buckling Cold roll-forming Experimental and numerical investigation of restoration behavior of Analysis of deformation behaviour of the large diameter pipe by sheet metals subjected to bulging deformation, 368 U-O bending process, 179 Bulge test Using an artificial neural network to assist roll design in cold Inverse identification using the bulge test and artificial neural roll-forming processes, 319 networks, 307 Localized edge buckling in cold roll-forming of circular tube section, Bulging 617 Experimental and numerical investigation of restoration behavior of Application of the Arbitrary Lagrangian Eulerian formulation to the sheet metals subjected to bulging deformation, 368 numerical simulation of cold roll forming process, 621 Bulging deformation Eco-efficiency of the cold roll formed product supply chain, 626 Study on the bulging deformation of the porous metal in upsetting, 154 Cold rolling Bulk forming Texture evolution and variations of a-phase volume fraction in On the use of artificial intelligence tools for fracture forecast in cold cold-rolled AISI 301 steel strip, 555 forming operations, 315 Development of a mixed film lubrication model in cold rolling, 575 Bursting failure Compact tension Investigation on determination of loading path to enhance formability Identification and validation of a ductile damage model for A533 in tube hydroforming process using APDL, 653 steel, 291 718 Subject Index of Volume 177 Composite Crack growth Simulation of welding chamber conditions for composite profile On the modelling of the interaction of materials softening and ductile extrusion, 587 damage during hot working of Alloy 80A, 282 Composite wire Analysis of blanking process using various damage criteria, 287 Experimental analysis of drawn composite wire, 701 Crack initiation Compression On the modelling of the interaction of materials softening and ductile An upper bound solution for a solid viscous cylinder subject to damage during hot working of Alloy 80A, 282 compression and twist, 159 Analysis of blanking process using various damage criteria, Forming behavior of magnesium sheet, 483 287 Compression test Identification and validation of a ductile damage model for A533 An investigation on determination of flow curves at room temperature steel, 291 and under forming conditions, 478 Crash Computer aided optimisation TRIP steel: Plastic behaviour modelling and influence on functional Numerical research and optimisation of high pressure sheet metal behaviour, 433 forming of tailor rolled blanks, 360 Critical friction Computer modeling Development of a critical friction model for cross wedge rolling hollow A physical based modeling approach for the dynamic behavior of shafts, 539 ultrafine grained structures, 456 Cross-wedge rolling Computer simulation Establishment of failure conditions for the cross-wedge rolling of hollow New framework for on-line feedback control of a deep-drawing shafts, 545 operation, 426 Cross-wedge rolling by means of one flat wedge and two shaped rolls, Conductivity 550 Characterisation of extruded magnesium profiles for electromagnetic Crown joining, 266 An approach to analyse the special rolling of thin strip, 130 Confidence limit Crystal orientation Parameter optimisation in constitutive equations for hot forging, 311 Effect of “additional shear strain layer” on tensile strength and Constitutive equation microstructure of fine drawn wire, 704 High temperature deformation of Inconel 718, 469 Crystal subdivision Constitutive model Effect of “additional shear strain layer” on tensile strength and Parameter optimisation in constitutive equations for hot forging, 311 microstructure of fine drawn wire, 704 Constitutive parameters Cylinder Variations of effective length of the hot torsion test specimen with An upper bound solution for a solid viscous cylinder subject to deformation, 465 compression and twist, 159 Contact condition Evaluation of contact conditions in hot forging of pure aluminum Damage using ultrasonic examination, 243 Virtual metal forming including the ductile damage occurrence. Contact friction Actual state of the art and main perspectives, 19 Contact friction modeling with the extended finite element method Finite element prediction of ductile fracture in sheet metal forming (X-FEM), 58 processes, 278 Contact ratio On the modelling of the interaction of materials softening and ductile Evaluation of contact conditions in hot forging of pure aluminum damage during hot working of Alloy 80A, 282 using ultrasonic examination, 243 Damage measurement Continuous expansion extrusion Identification and validation of a ductile damage model for A533 A method to produce aluminum alloy tube busbars by continuous steel, 29] casting-expansion extrusion, 163 Damage mechanics Continuous extrusion Numerical and experimental assessment of ductile fracture in tensile Analysis of flash formation in continuous rotary extrusion of copper, and compressive-dominant processes, 300 600 Data mining Continuous rotary extrusion Prediction of coiling temperature on run-out table of hot strip mill Numerical simulation of flash formation in continuous rotary extrusion using data mining, 121 of copper, 604 Deep-drawing Coordinate measuring machine Finite element analysis and formability of non-isothermal deep drawing A study on the computer-aided measuring integration system for the of AZ31B sheets, 142 sheet metal stamping die, 138 New framework for on-line feedback control of a deep-drawing Corner forming operation, 426 Analysis of thinning at the transition corner in tube hydroforming, Deformation analysis 688 Deformation analysis of Au wire bonding, 709 Correction factor Deformation history An investigation on determination of flow curves at room temperature Analysis of deformation behaviour of the large diameter pipe by and under forming conditions, 478 U-O bending process, 179 Correlations Investigation on preformed shape design to improve formability in Sensitivity analysis of quantitative fracture criterion based on the results tube hydroforming process using FEM, 658 of the SICO test, 296 Design of experiment Coulomb friction On the quantification of strain distribution in drawn sheet metal products, Energetic analysis of tube drawing processes with fixed plug by upper 439 bound method, 175 Diagonal matrix Crack Parallel processing of 3D rigid-plastic finite element method using A study on crack healing in 1045 steel, 233 diagonal matrix, 63 Subject Index of Volume 177 Die casting Electromagnetic forming processes Novel applications of smoothed particle hydrodynamics (SPH) in Multifield modeling of electromagnetic metal forming processes, 270 metal forming, 41 Electromagnetic joining Die design Characterisation of extruded magnesium profiles for electromagnetic A knowledge-based engineering design tool for metal forging, 331 joining, 266 Die diagnosis End forming of tubes A study on the computer-aided measuring integration system for the End forming of thin-walled tubes, 183 sheet metal stamping die, 138 Energy consumption Die filling Power optimization of common breaking-down sequences in shape The effects of flash allowance and bar size on forming load and metal rolling, 517 flow in closed die forging, 261 Experimental and numerical study of energy consumption in forward Die land length and backward rod extrusion, 612 Upper bound analysis of die land length in cold extrusion, 608 Enrichment function Die semiangle The extended finite element method (X-FEM) for powder forming Influence of geometrical conditions on central burst appearance in problems, 53 axisymmetrical drawing processes, 304 Environmentally friendly Die structure design automation Increasing formability in sheet metal stamping operations using A simplified column model for the automatic design of the stamping environmentally friendly lubricants, 87 die structure, 109 Eulerian Dimensional errors Elasto-plastic finite element simulation of asymmetrical plate rolling Quantitative evaluation of dimensional errors of formed components using an ALE approach, 525 in cold backward cup extrusion, 591 Experimental tests Direct extrusion Tube-hydroforming experiments on an Al 7003 extruded tube, 672 Analysis of quality of bimetallic rod after extrusion process, 582 Experimentation Directional hardening End forming of thin-walled tubes, 183 Modeling and simulation of directional hardening in metals during Experiments non-proportional loading, 430 Three dimensional thermo-mechanical simulation of the tube forming DLC coating process in Diescher’s mill, 167 Fabrication of dies in micro-scale for micro-sheet metal forming, Cross-wedge rolling by means of one flat wedge and two shaped rolls, 550 639 Extended FEM Drawing processes The extended finite element method (X-FEM) for powder forming Influence of geometrical conditions on central burst appearance in problems, 53 axisymmetrical drawing processes, 304 Contact friction modeling with the extended finite element method Drilling (X-FEM), 58 Embedding of a circular plate into a thin plate by shear joining and its Extrusion joint strength, 76 Prediction of structure during shaped extrusion and subsequent static Ductile damage recrystallisation during the solution soaking operation, 26 Identification and validation of a ductile damage model for A533 Novel applications of smoothed particle hydrodynamics (SPH) in steel, 291 metal forming, 41 Ductile fracture Solid state bonding in extrusion and FSW: Process mechanics and On the use of artificial intelligence tools for fracture forecast in cold analogies, 344 forming operations, 315 Simulation of welding chamber conditions for composite profile Dynamic recrystallisation extrusion, 587 On the modelling of the interaction of materials softening and ductile Extrusion pressure damage during hot working of Alloy 80A, 282 Upper bound analysis of die land length in cold extrusion, 608 EBSD FE analysis On the modelling of the interaction of materials softening and ductile Advanced finite element modelling of plate rolling operations, 513 damage during hot working of Alloy 80A, 282 FE model validation Effect of “additional shear strain layer” on tensile strength and Tube-hydroforming experiments on an Al 7003 extruded tube, 672 microstructure of fine drawn wire, 704 FE simulation Eccentric shaft An integrated numerical technique in determining blank shape for net- The research of forging process of eccentric part on three slide forging shape sheet metal forming, 72 press, 214 A method of constructing smooth tool surfaces for FE prediction of Eco-efficiency springback in sheet metal forming, 382 Eco-efficiency of the cold roll formed product supply chain, 626 TRIP steel: Plastic behaviour modelling and influence on functional Effective length behaviour, 433 Variations of effective length of the hot torsion test specimen with FEA deformation, 465 Virtual metal forming including the ductile damage occurrence. Elastic—plastic dynamic explicit FEM Actual state of the art and main perspectives, 19 Research on the influence of material properties on cold ring rolling FEA simulation processes by 3D-FE numerical simulation, 634 An approach to process limitations in hydroforming of X-joints as Elasto-plastic based on formability evaluation, 663 Novel applications of smoothed particle hydrodynamics (SPH) in FEM metal forming, 41 Prediction of structure during shaped extrusion and subsequent static Electrical resistivity recrystallisation during the solution soaking operation, 26 A method to produce aluminum alloy tube busbars by continuous Development of an integrated CAD/CAE/CAM system on taper-tipped casting-expansion extrusion, 163 thread-rolling die-plates, 98 720 Subject Index of Volume 177 Investigation of a slab method analysis and FEM simulation on rotating Finite element simulation compression forming of ring, 150 Modelling of oxide scale surface roughness in hot metal forming, 126 Free deformation mechanism and change of forming mode in tube Numerical research and optimisation of high pressure sheet metal inversion under conical die, 171 forming of tailor rolled blanks, 360 Prevention of lap formation in near net shape isothermal forging Joinability of aluminium alloy and mild steel sheets by self piercing technology of part of irregular shape made of aluminium alloy rivet, 417 A92618, 218 Cold rolling of galvanized strips: A new approach to the evaluation of Theoretical and laboratory modelling of the closure of metallurgical zinc fines formation, 505 defects during forming of a forging, 238 Localized edge buckling in cold roll-forming of circular tube section, Forming of aluminum foam sandwich panels: Numerical simulations 617 and experimental tests, 364 Analysis of thinning at the transition corner in tube hydroforming, 688 Numerical investigation on dynamic effects during sheet metal Finite elements spinning by explicit finite-element-analysis, 401 Optimisation of the superplastic forming of aluminium alloys, 91 Theoretical and experimental analysis of the dieless incremental sheet Finite element analysis and formability of non-isothermal deep drawing forming process, 404 of AZ31B sheets, 142 Using forming simulations to improve mechanical simulation accuracy, Accelerated 3D FEM computation of the mechanical history of the 422 metal deformation in cold pilgering of tubes, 188 The application of the inverse method for determination of slitting Finite element prediction of ductile fracture in sheet metal forming criterion parameter during the multi slit rolling (MSR) process, processes, 278 493 Numerical and experimental assessment of ductile fracture in tensile Elasto-plastic finite element simulation of asymmetrical plate rolling and compressive-dominant processes, 300 using an ALE approach, 525 Inverse identification using the bulge test and artificial neural networks, Cross-wedge rolling by means of one flat wedge and two shaped rolls, 307 550 Power optimization of common breaking-down sequences in shape Numerical modelling of the metal flow and stock bending during the rolling, 517 rolling of unequal angle bar, 561 Establishment of failure conditions for the cross-wedge rolling of hollow Numerical modelling of the metal flow during the rolling process of shafts, 545 the round screw-ribbed bar in the finishing pass, 566 Application of the Arbitrary Lagrangian Eulerian formulation to the Numerical simulation of flash formation in continuous rotary extrusion numerical simulation of cold roll forming process, 621 of copper, 604 Finite-element-analysis Finite element simulation and experiment in tube hydroforming of A study of size effect in micro-forming with micro-hardness tests, unequal T shapes, 684 146 FEM analysis Study on the bulging deformation of the porous metal in upsetting, Three dimensional thermo-mechanical simulation of the tube forming 154 process in Diescher’s mill, 167 Improvement of tool life in cold forging by locally optimized surfaces, FEM simulation 206 Forming process of valve drop forging with three cavities, 228 Quantitative evaluation of dimensional errors of formed components The research of forging process of eccentric part on three slide forging in cold backward cup extrusion, 591 press, 214 Fixed inner plug Experimental and numerical investigation of restoration behavior of Energetic analysis of tube drawing processes with fixed plug by upper sheet metals subjected to bulging deformation, 368 bound method, 175 Finite elasto-viscoplasticity Flash Virtual metal forming including the ductile damage occurrence. Analysis of flash formation in continuous rotary extrusion of copper, Actual state of the art and main perspectives, 19 600 Finite Element Method Numerical simulation of flash formation in continuous rotary extrusion Application of the fully automatic 3D hp adaptive code to orthotropic of copper, 604 heat transfer in structurally graded material properties, 68 Flash allowance Modelling the free forming of superplastic Pb—Sn60 at constant pressure, The effects of flash allowance and bar size on forming load and metal 95 flow in closed die forging, 261 Modeling of aluminum alloy sheets based on new anisotropic yield Flexibility functions, 134 The design of a flexible model ring rolling machine, 630 End forming of thin-walled tubes, 183 Flow behavior Relations between numerical simulation and experiment in closed die Investigation of the thermo-mechanical properties of hot stamping forging of a gear, 256 steels, 452 Multifield modeling of electromagnetic metal forming processes, 270 Flow curves New framework for on-line feedback control of a deep-drawing Quantitative analysis of the microstructure of near B titanium alloy operation, 426 during compression tests, 473 Modelling of skinpass rolling by elasto-plastic analysis of plane strain Flow modelling upsetting, 509 Modelling of the rheological behaviour of aluminium alloys in multistep Development of a critical friction model for cross wedge rolling hollow hot deformation using the multiple regression analysis and artificial shafts, 539 neural network techniques, 323 Simulation of welding chamber conditions for composite profile Flow stress extrusion, 587 A study of size effect in micro-forming with micro-hardness tests, Study on piercing mechanism of small holes, 649 146 Formability of tube hydroforming under various loading paths, 676 Influence of sequence and simultaneous deformation on behavior of Finite element rolling simulation CuSi3.5 silicon bronze, 448 Application of hydrostatic integration parameter for free-forging and A physical based modeling approach for the dynamic behavior of rolling, 521 ultrafine grained structures, 456 Subject Index of Volume 177 721 Fluid flows Free deformation Modelling and process control for the hydroforming of metallic liners Free deformation mechanism and change of forming mode in tube used for hydrogen storage, 697 inversion under conical die, 171 Foams Free forging Forming of aluminum foam sandwich panels: Numerical simulations Theoretical and laboratory modelling of the closure of metallurgical and experimental tests, 364 defects during forming of a forging, 238 Force monitoring Free-machining steel A force measuring based strategy for failure prevention in incremental Experimental investigation of the spatial variation in viscoplastic forming, 413 response of free-machining steels in hot rolling conditions, 497 Forging Friction Novel applications of smoothed particle hydrodynamics (SPH) in A new experimental procedure of evaluating the friction coefficient in metal forming, 41 elastic and plastic regions, 247 Quantitative analysis of the impact of forging operations on fatigue An investigation on determination of flow curves at room temperature properties of steel components, 202 and under forming conditions, 478 A knowledge-based engineering design tool for metal forging, 331 Friction factor Forging load Prevention of lap formation in near net shape isothermal forging The effects of flash allowance and bar size on forming load and metal technology of part of irregular shape made of aluminium alloy flow in closed die forging, 261 A92618, 218 Formability Friction stir welding Increasing formability in sheet metal stamping operations using Utilisation of engineering workshop equipment for friction stir environmentally friendly lubricants, 87 welding, 336 Finite element analysis and formability of non-isothermal deep drawing On microstructural phenomena occurring in friction stir welding of of AZ31B sheets, 142 aluminium alloys, 340 Characterisation of extruded magnesium profiles for electromagnetic FSW joining, 266 Solid state bonding in extrusion and FSW: Process mechanics and Effect of annealing temperature on the formability of Al-Mg4.5—Cu0.5 analogies, 344 alloy sheets, 386 Investigation on preformed shape design to improve formability in Geometric parameters tube hydroforming process using FEM, 658 Towards an optimisation of forging processes using geometric param- Forming eters, 224 Forming of axisymmetric tubes under the influence of impulse-magnetic Grain refinement field and computer simulation of the process, 274 A physical based modeling approach for the dynamic behavior of TRIP steel: Plastic behaviour modelling and influence on functional ultrafine grained structures, 456 behaviour, 433 Grain size Forming limit Prediction of microstructural evolution in hot rolling, 530 Twin-roll strip casting of AZ61 magnesium alloy and improvement of Gurson damage model formability by structure-control rolling, 534 Analysis of blanking process using various damage criteria, 287 An approach to process limitations in hydroforming of X-joints as based on formability evaluation, 663 Hall—Petch relationship Forming machine The possibilities of mechanical property control in fine grained struc- Micro-forming and miniature manufacturing systems — development tures, 461 needs and perspectives, 8 Hard roller burnishing Forming mode Improvement of tool life in cold forging by locally optimized surfaces, Free deformation mechanism and change of forming mode in tube 206 inversion under conical die, 171 Hardening Forming process design Joining and shaping fit of dissimilar materials by shot peening, On the use of artificial intelligence tools for fracture forecast in cold 356 forming operations, 315 Healing Forming processes A study on crack healing in 1045 steel, 233 Parallel processing of 3D rigid-plastic finite element method using Heat treatment diagonal matrix, 63 Thermo-mechanical treatment using resistance heating for production Towards an optimisation of forging processes using geometric of fine grained heat-treatable aluminum alloy sheets, 444 parameters, 224 High cycle multiaxial fatigue Forming tool Quantitative analysis of the impact of forging operations on fatigue Investigation on the sliding of aluminium thin foils against PVD-coated properties of steel components, 202 carbide forming-tools during micro-forming, 644 High strain rate Forward extrusion A physical based modeling approach for the dynamic behavior of Experimental and numerical study of energy consumption in forward ultrafine grained structures, 456 and backward rod extrusion, 612 High strength steels Fracture Investigation of 22MnBS5 formability in hot stamping operations, 396 An approach to process limitations in hydroforming of X-joints as Investigation of the thermo-mechanical properties of hot stamping based on formability evaluation, 663 steels, 452 Fracture criteria High temperature damage Sensitivity analysis of quantitative fracture criterion based on the Prediction and avoidance of high temperature damage in long product results of the SICO test, 296 hot rolling, 486 Free cutting steels Hollow shafts Prediction and avoidance of high temperature damage in long product Development of a critical friction model for cross wedge rolling hollow hot rolling, 486 shafts, 539 722 Subject Index of Volume 177 Hot deformation Initial conditions Quantitative analysis of the microstructure of near B titanium alloy Using forming simulations to improve mechanical simulation accuracy, during compression tests, 473 422 Hot forging Integral shapes Evaluation of contact conditions in hot forging of pure aluminum Using an artificial neural network to assist roll design in cold roll-form- using ultrasonic examination, 243 ing processes, 319 Effects of simulation conditions on evaluation of tool temperature in Intelligent agent system hot extrusion-forging, 251 Distributed multi-agent system approach for sheet metal forming, 327 Hot forming Internal defects High temperature deformation of Inconel 718, 469 Establishment of failure conditions for the cross-wedge rolling of hollow Hot rolling shafts, 545 Oxide scale behaviour on aluminium and steel under hot working Internal high pressure forming conditions, 36 Effect of wrinkling behavior on formability and thickness distribution Experimental investigation of the spatial variation in viscoplastic in tube hydroforming, 668 response of free-machining steels in hot rolling conditions, 497 Inverse method Prediction of microstructural evolution in hot rolling, 530 The application of the inverse method for determination of slitting Numerical modelling of the metal flow during the rolling process of criterion parameter during the multi slit rolling (MSR) process, 493 the round screw-ribbed bar in the finishing pass, 566 Inverse modelling Hot stamping Optimized decision of the exact material modes in the simulation for Investigation of 22MnB5 formability in hot stamping operations, 396 the innovative sheet hydroforming method, 692 Investigation of the thermo-mechanical properties of hot stamping lon beam irradiation steels, 452 Fabrication of dies in micro-scale for micro-sheet metal forming, 639 Hot strip mill Isothermal forming Prediction of coiling temperature on run-out table of hot strip mill Prevention of lap formation in near net shape isothermal forging using data mining, 121 technology of part of irregular shape made of aluminium alloy Hot torsion test A92618, 218 Variations of effective length of the hot torsion test specimen with deformation, 465 Joining hp adaptivity Joining and shaping fit of dissimilar materials by shot peening, 356 Application of the fully automatic 3D hp adaptive code to orthotropic Joinability of aluminium alloy and mild steel sheets by self piercing heat transfer in structurally graded material properties, 68 rivet, 417 Hydroforming Joint strength Numerical research and optimisation of high pressure sheet metal Embedding of a circular plate into a thin plate by shear joining and its forming of tailor rolled blanks, 360 joint strength, 76 An approach to process limitations in hydroforming of X-joints as based on formability evaluation, 663 Knowledge based system Effect of wrinkling behavior on formability and thickness distribution A knowledge-based engineering design tool for metal forging, 331 in tube hydroforming, 668 An experimental investigation into the formability of hydroforming Lagrangian 5A02 Al-tubes at elevated temperature, 680 Elasto-plastic finite element simulation of asymmetrical plate rolling Modelling and process control for the hydroforming of metallic liners using an ALE approach, 525 used for hydrogen storage, 697 Large deformation Hydrostatic integration Application of the Arbitrary Lagrangian Eulerian formulation to the Application of hydrostatic integration parameter for free-forging and numerical simulation of cold roll forming process, 621 rolling, 521 Modeling and simulation of directional hardening in metals during Hydrostatic stress non-proportional loading, 430 Influence of geometrical conditions on central burst appearance in Large diameter axisymmetrical drawing processes, 304 A new method to accurately obtain wrinkling limit diagram in NC bending process of thin-walled tube with large diameter under Identification different loading paths, 192 Inverse identification using the bulge test and artificial neural networks, Large-scale 3D simulation 307 Parallel processing of 3D rigid-plastic finite element method using Image processing diagonal matrix, 63 Close loop control of a hydraulic press for springback analysis, Laser beam 377 Manufacture of magnetic scaling rod with transformation-induced Inclusions experimental mechanical testing plasticity, 570 Prediction and avoidance of high temperature damage in long product Laser beam treating hot rolling, 486 Improvement of tool life in cold forging by locally optimized surfaces, Inconel 718 206 High temperature deformation of Inconel 718, 469 Latham and Cockcroft Incremental forming Sensitivity analysis of quantitative fracture criterion based on the Theoretical and experimental analysis of the dieless incremental sheet results of the SICO test, 296 forming process, 404 Lead A force measuring based strategy for failure prevention in incremental An investigation on determination of flow curves at room temperature forming, 413 and under forming conditions, 478 Incremental sheet metal spinning Lightweight component Numerical investigation on dynamic effects during sheet metal spinning Analysis of thinning at the transition corner in tube hydroforming, by explicit finite-element-analysis, 401 688

See more

The list of books you might like

Upgrade Premium
Most books are stored in the elastic cloud where traffic is expensive. For this reason, we have a limit on daily download.
DMCA & Copyright: Dear all, most of the website is community built, users are uploading hundred of books everyday, which makes really hard for us to identify copyrighted material, please contact us if you want any material removed.
Copyright @ PDFdrive.to, 2022 | We love our users