G240WB GPON ONU User Manual 7368 ISAM ONT G-240W-B Product Guide Alcatel-Lucent ...

113 Pages·2015·2.45 MB·English

R05.01.01 | December 2014 | 3FE-56678-AAAA-TCZZA | Edition 01

Alcatel-Lucent 7368

INTELLIGENT SERVICES ACCESS MANAGER ONT
G-2 40W-B P R ODUC T GU IDE

Alcatel-Lucent Proprietary
This document contains proprietary information of Alcatel-Lucent and is not to be disclosed
or used except in accordance with applicable agreements.
Copyright 2014 © Alcatel-Lucent. All rights reserved.
R05.01.01 | December 2014 | 3FE-56678-AAAA-TCZZA | Edition 01

Alcatel-Lucent assumes no responsibility for the accuracy of the information presented, which is
subject to change without notice.
Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All
other trademarks are the property of their respective owners.

Copyright 2014 Alcatel-Lucent.
All rights reserved.

Disclaimers

Alcatel-Lucent products are intended for commercial uses. Without the appropriate network design
engineering, they must not be sold, licensed or otherwise distributed for use in any hazardous
environments requiring fail-safe performance, such as in the operation of nuclear facilities, aircraft
navigation or communication systems, air traffic control, direct life-support machines, or weapons
systems, in which the failure of products could lead directly to death, personal injury, or severe physical
or environmental damage. The customer hereby agrees that the use, sale, license or other distribution
of the products for any such application without the prior written consent of Alcatel-Lucent, shall be at
the customer's sole risk. The customer hereby agrees to defend and hold Alcatel-Lucent harmless from
any claims for loss, cost, damage, expense or liability that may arise out of or in connection with the
use, sale, license or other distribution of the products in such applications.

This document may contain information regarding the use and installation of non-Alcatel-Lucent
products. Please note that this information is provided as a courtesy to assist you. While Alcatel-Lucent
tries to ensure that this information accurately reflects information provided by the supplier, please refer
to the materials provided with any non-Alcatel-Lucent product and contact the supplier for
confirmation. Alcatel-Lucent assumes no responsibility or liability for incorrect or incomplete
information provided about non-Alcatel-Lucent products.

However, this does not constitute a representation or warranty. The warranties provided for
Alcatel-Lucent products, if any, are set forth in contractual documentation entered into by
Alcatel-Lucent and its customers.

This document was originally written in English. If there is any conflict or inconsistency between the
English version and any other version of a document, the English version shall prevail.

When printed by Alcatel-Lucent, this document is printed on recycled paper.
R05.01.01 | December 2014 | 3FE-56678-AAAA-TCZZA | Edition 01

Preface

This preface provides general information about the documentation set for optical
network terminals (ONTs).

Scope

This documentation set provides information about safety, features and
functionality, ordering, hardware installation and maintenance, and software
installation procedures for the current release.

Audience

This documentation set is intended for planners, administrators, operators, and
maintenance personnel involved in installing, upgrading, or maintaining the ONTs.

Required knowledge

The reader must be familiar with general telecommunications principles.

Acronyms and initialisms

The expansions and optional descriptions of most acronyms and initialisms appear
in the glossary.

Alcatel-Lucent 7368 ISAM ONT iii
Edition 01
G-240W-B Product Guide
R05.01.01 | December 2014 | 3FE-56678-AAAA-TCZZA | Edition 01

Preface

Assistance and ordering phone numbers

Alcatel-Lucent provides global technical support through regional call centers.
Phone numbers for the regional call centers are available at the following URL:
http://www.alcatel-lucent.com/myaccess.

For ordering information, contact your Alcatel-Lucent sales representative.

Alcatel-Lucent quality processes

Alcatel-Lucent’s ONT manufacturing, testing, and inspecting practices are in
compliance with GR-1252-CORE and TL 9000 requirements. These requirements
are documented in the Operations Quality Plan 8BD-00023-4204-QRZZA, the
Alcatel North American Quality Manual 8BD-00001-0000-QRZZA, and the
Wireline Network Quality Manual 8AB-83179-0001-QRAAA.

The quality plans and practices adequately ensure that technical requirements and
customer end-point requirements are met. The customer or its representatives may
be allowed to perform on-site quality surveillance audits, as agreed upon during
contract negotiations.

Safety information

For safety information, see the appropriate safety guidelines chapter.

Documents

Documents are available using ALED or OLCS.

Procedure 1 To download a ZIP file package of the customer
documentation

1 Navigate to http://www.alcatel-lucent.com/myaccess and enter your user name
and password. If you are a new user and require access to this service, please
contact your Alcatel-Lucent sales representative.

2 From the Technical Content for drop-down menu, choose the product.

3 Click on Downloads: Electronic Delivery.

4 Choose Documentation from the drop-down menu and click Next.

5 Select the image from the drop-down menu and click Next.

6 Follow the on-screen directions to download the file.

iv Alcatel-Lucent 7368 ISAM ONT
Edition 01
G-240W-B Product Guide
R05.01.01 | December 2014 | 3FE-56678-AAAA-TCZZA | Edition 01
Preface

Procedure 2 To access individual documents

Individual PDFs of customer documents are also accessible through the Alcatel-Lucent
Customer Support website.

1 Navigate to http://www.alcatel-lucent.com/myaccess and enter your user name
and password. If you are a new user and require access to this service, please
contact your Alcatel-Lucent sales representative.

2 From the Technical Content for drop-down menu, choose the product.

3 Click on Manuals and Guides to display a list of customer documents by title and
part number. You can filter this list using the Release drop-down menu.

4 Click on the PDF to open or save the file.

Special information

The following are examples of how special information is presented in this
document.

Danger — Danger indicates that the described activity or situation
may result in serious personal injury or death; for example, high
voltage or electric shock hazards.
Danger indique que l'activité ou la situation décrite
peuvent entraîner des blessures corporelles graves ou mortelles;
par exemple, haute tension ou de risques d'électrocution.

Warning — Warning indicates that the described activity or situation
may, or will, cause equipment damage or serious performance
problems.
Warning indique que l'activité ou la situation décrite ne
peut, ou la volonté, des dommages matériels de cause ou de graves
problèmes de performance

Caution — Caution indicates that the described activity or situation
may, or will, cause service interruption.
Caution indique que l'activité ou la situation décrite
peut, ou la volonté, le service de la cause interruption.

Note — A note provides information that is, or may be, of special
interest.
Une note fournit des informations qui est, ou peut être,
d'un intérêt particulier.

Procedures with options or substeps

When there are options in a procedure, they are identified by letters. When there are
required substeps in a procedure, they are identified by roman numerals.
R05.01.01 | December 2014 | 3FE-56678-AAAA-TCZZA | Edition 01
Preface

Procedure 3 Example of options in a procedure

At step 1, you can choose option a or b. At step 2, you must do what the step indicates.

1 This step offers two options. You must choose one of the following:

a This is one option.

b This is another option.

2 You must perform this step.

Procedure 4 Example of required substeps in a procedure

At step 1, you must perform a series of substeps within a step. At step 2, you must do
what the step indicates.

1 This step has a series of substeps that you must perform to complete the step. You
must perform the following substeps:

i This is the first substep.

ii This is the second substep.

iii This is the third substep.

2 You must perform this step.

Multiple PDF document search

You can use Adobe Reader Release 6.0 and later to search multiple PDF files for a
common term. Adobe Reader displays the results in a single display panel. The
results are grouped by PDF file, and you can expand the entry for each file.

Note — The PDF files in which you search must be in the same
folder.
Les fichiers PDF dans lequel vous recherchez doivent
être dans le même dossier

Procedure 5 To search multiple PDF files for a common term

1 Open Adobe Acrobat Reader.

2 Choose Edit→Search from the Acrobat Reader main menu. The Search PDF panel
appears.

3 Enter the search criteria.

vi Alcatel-Lucent 7368 ISAM ONT
Edition 01
R05.01.01 | December 2014 | 3FE-56678-AAAA-TCZZA | Edition 01
Preface

4 Click on the All PDF Documents In radio button.

5 Select the folder in which to search using the drop-down menu.

6 Click on the Search button.

Acrobat Reader displays the search results. You can expand the entries for each
document by clicking on the + symbol.

Alcatel-Lucent 7368 ISAM ONT vii
Edition 01
G-240W-B Product Guide
R05.01.01 | December 2014 | 3FE-56678-AAAA-TCZZA | Edition 01

ETSI ONT safety guidelines

This chapter provides information about the mandatory regulations that govern the
installation and operation of the optical network terminals (ONTs).

Safety instructions

This section describes the safety instructions that are provided in the ONT customer
documentation and on the equipment.

Safety instruction boxes

The safety instruction boxes are provided in the ONT customer documentation.
Observe the instructions to meet safety requirements.

The following is an example of the Danger box.

Danger — Possibility of personal injury.
Possibilité de blessures.

The Danger box indicates that the described activity or situation may pose a threat to
personal safety. It calls attention to a situation or procedure which, if not correctly
performed or adhered to, may result in death or serious physical harm.

Do not proceed beyond a Danger box until the indicated conditions are fully
understood and met.

The following is an example of the Warning box.

Warning 1 — Possibility of equipment damage.
Possibilité de dommages matériels.

Warning 2 — Possibility of data loss.
Possibilité de perte de données.
R05.01.01 | December 2014 | 3FE-56678-AAAA-TCZZA | Edition 01

ETSI ONT safety guidelines

The Warning box indicates that the described activity or situation may, or will, cause
equipment damage, loss of data, or serious performance problems. It identifies a
possible equipment-damaging situation or provides essential information to avoid
the degradation of system operations or data.

Do not proceed beyond a warning until the indicated conditions are fully understood
and met.

The following is an example of the Caution box.

Caution 1 — Possibility of service interruption.
Possibilité d'interruption de service.

Caution 2 — Service interruption.
Interruption de service

The Caution box indicates that the described activity or situation may, or will, cause
service interruption.

Do not proceed beyond a caution until the indicated conditions are fully understood
and met.

The following is an example of the Note box.

Note — Information of special interest.
L'information d'intérêt spécial.

The Note box provides information that assists the personnel working with ONTs. It
does not provide safety-related instructions.

Safety-related labels

The ONT equipment is labeled with the specific safety instructions and compliance
information that is related to a variant of the ONT. Observe the instructions on the
safety labels.

Table 1 provides sample safety labels on the ONT equipment.

Table 1 Safety labels

Description Label text
ESD warning Caution: This assembly contains an electrostatic sensitive device.
Laser classification Class 1 laser product
PSE marking These power supplies are Japan PSE certified and compliant with
Japan VCCI emissions standards.

Figure 1 shows the PSE certification.

x Alcatel-Lucent 7368 ISAM ONT
R05.01.01 | December 2014 | 3FE-56678-AAAA-TCZZA | Edition 01
ETSI ONT safety guidelines

Figure 1 PSE certification

This is a Class B product based on the standard of the Voluntary Control Council for Interference
from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in
a domestic environment, it may cause radio interference. Install and use the equipment according
Warning to the instruction manual.

19841

Safety standards compliance

This section describes the ONT compliance with the European safety standards.

EMC, EMI, and ESD compliance

The ONT equipment complies with the following EMC, EMI, and ESD
requirements:

• EN 300-386 V1.3.2 (2003-05): Electromagnetic Compatibility and Radio
Spectrum Matters (ERM): Telecommunications Network Equipment;
Electromagnetic Compatibility (EMC) requirements; Electrostatic Discharge
(ESD) requirements
• EN 55022 (1998): Class B, Information Technology Equipment, Radio
Disturbance Characteristics, limits and methods of measurement
• EN 55024 (1998): Information Technology Equipment, Immunity
Characteristics, limits and methods of measurement
• European Council Directive 2004/108/EC
• EN 300-386 V1.4.1: 2008
• EN 55022:2006 Class B (ONTs)
• EN EN 61000-3-2:2006
• EN EN 61000-3-3:2008
• IEC 61000-4-2:2001
• IEC 61000-4-3:2006
• IEC 61000-4-4:2004
• IEC 61000-4-5:2005
• IEC 61000-4-6:2003/A1:2004/A2:2006
• IEC 61000-4-11:2004

Equipment safety standard compliance

The ONT equipment complies with the requirements of EN 60950-1, Safety of
Information Technology Equipment for use in a restricted location (per R-269).

Alcatel-Lucent 7368 ISAM ONT xi
Edition 01
G-240W-B Product Guide