Advances on Mechanics, Design Engineering and Manufacturing : Proceedings of the International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing (JCM 2016), 14-16 September, 2016, Catania, Italy

1208 Pages·2017·95.1 MB·English

by  Benoit Eynard

Lecture Notes in Mechanical Engineering
Benoit Eynard
Vincenzo Nigrelli
Salvatore Massimo Oliveri
Guillermo Peris-Fajarnes
Sergio Rizzuti E ditors
Advances on
Mechanics, Design
Engineering and
Manufacturing
Proceedings of the International Joint Conference
on Mechanics, Design Engineering & Advanced
Manufacturing (JCM 2016), 14–16 September,
2016, Catania, Italy
Lecture Notes in Mechanical Engineering
About this Series
Lecture Notes in Mechanical Engineering (LNME) publishes the latest
developments in Mechanical Engineering—quickly, informally and with high
quality. Original research reported in proceedings and post-proceedings represents
the core of LNME. Also considered for publication are monographs, contributed
volumes and lecture notes of exceptionally high quality and interest. Volumes
published in LNME embrace all aspects, subfields and new challenges of
mechanical engineering. Topics in the series include:
(cid:129) Engineering Design
(cid:129) Machinery and Machine Elements
(cid:129) Mechanical Structures and Stress Analysis
(cid:129) Automotive Engineering
(cid:129) Engine Technology
(cid:129) Aerospace Technology and Astronautics
(cid:129) Nanotechnology and Microengineering
(cid:129) Control, Robotics, Mechatronics
(cid:129) MEMS
(cid:129) Theoretical and Applied Mechanics
(cid:129) Dynamical Systems, Control
(cid:129) Fluid Mechanics
(cid:129) Engineering Thermodynamics, Heat and Mass Transfer
(cid:129) Manufacturing
(cid:129) Precision Engineering, Instrumentation, Measurement
(cid:129) Materials Engineering
(cid:129) Tribology and Surface Technology
More information about this series at http://www.springer.com/series/11236
Benoit Eynard Vincenzo Nigrelli
(cid:129)
Salvatore Massimo Oliveri
Guillermo Peris-Fajarnes
Sergio Rizzuti
Editors
Advances on Mechanics,
Design Engineering
and Manufacturing
Proceedings of the International Joint
Conference on Mechanics, Design
Engineering & Advanced Manufacturing
–
(JCM 2016), 14 16 September, 2016,
Catania, Italy
Organizing Scientific Associations:
AIP-PRIMECA—Ateliers Inter-établissements de
Productique—Pôles de Resources Informatiques
pour la MECAnique—France
ADM—Associazione nazionale Disegno e Metodi
dell’ingegneria industriale—Italy
INGEGRAF—Asociación Española de Ingeniería
Gráfica—Spain
123
Editors
Benoit Eynard Guillermo Peris-Fajarnes
UniversitédeTechnologie deCompiègne Universidad Politecnica deValencia
Compiègne Valencia
France Spain
Vincenzo Nigrelli SergioRizzuti
Dipartimento di IngegneriaChimica, Dipartimento di IngegneriaMeccanica,
Gestionale,Informatica, Meccanica EnergeticaeGestionale
Universitàdegli Studi diPalermo Universitàdella Calabria
Palermo Rende,Cosenza
Italy Italy
SalvatoreMassimo Oliveri
Dipartimento di IngegneriaElettrica,
Elettronica eInformatica (DIEEI)
Universitàdegli Studi diCatania
Catania
Italy
ISSN 2195-4356 ISSN 2195-4364 (electronic)
Lecture Notesin MechanicalEngineering
ISBN978-3-319-45780-2 ISBN978-3-319-45781-9 (eBook)
DOI 10.1007/978-3-319-45781-9
LibraryofCongressControlNumber:2016950391
©SpringerInternationalPublishingAG2017
Thisworkissubjecttocopyright.AllrightsarereservedbythePublisher,whetherthewholeorpart
of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations,
recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission
or information storage and retrieval, electronic adaptation, computer software, or by similar or
dissimilarmethodologynowknownorhereafterdeveloped.
The use of general descriptive names, registered names, trademarks, service marks, etc. in this
publication does not imply, even in the absence of a specific statement, that such names are exempt
fromtherelevantprotectivelawsandregulationsandthereforefreeforgeneraluse.
The publisher, the authors and the editors are safe to assume that the advice and information in this
book are believed to be true and accurate at the date of publication. Neither the publisher nor the
authors or the editors give a warranty, express or implied, with respect to the material contained
hereinorforanyerrorsoromissionsthatmayhavebeenmade.
Printedonacid-freepaper
ThisSpringerimprintispublishedbySpringerNature
TheregisteredcompanyisSpringerInternationalPublishingAG
Theregisteredcompanyaddressis:Gewerbestrasse11,6330Cham,Switzerland
Preface and Acknowledgements
The JCM Conference has arrived at its second event, following JCM 2014 held in
Toulouse(F)in2014.Thecycleofconferencesstartedin2003withbiennialeditions
organizedbyADM(DesignandMethodsofIndustrialEngineeringSociety—Italy)
and INGEGRAF (Asociación Española de Ingeniería Gráfica—Spain). In the con-
jointconferenceheldatVeniceinJune2011(IMProVe2011)alsoAIP-PRIMECA
(Ateliers Inter-établissements de Productique—Pôles de Resources Informatiques
pour laMECAnique—France) took part theevent asorganizer.
JCM 2016 has been organized by Rapid Prototyping and Geometric Modelling
Laboratory of the University of Catania (IT)—Department of Electronic, Electric
and Informatics Engineering (DIEEI).
JCM 2016 has gathered researchers, industry experts in the domain of
“Interactive and Integrated Design and Manufacturing for Innovation” to dissemi-
natetheirmajorandrecentresults,studies,implementations,toolsandtechniquesat
an international level.
The overall number of authors involved has been 404. JCM 2016 attracted
138 abstract submissions that became 135 papers. Due to a peer-review process,
123 papers have been selected and accepted for presentation at conference, as
podium or poster session. The precious reviewing work has been possible because
111 persons have been involved in the process, which has been coordinated by
24 track chairs, providing not less than two reviews per paper, for a total of
381 reviews.
The book is organized in several parts, each one corresponding to the tracks
oftheConference.Eachpartisbrieflyintroducedbythetrackchairs,thatfollowed
the review process.
Wewouldliketopersonallythankallthepeopleinvolvedinthereviewprocess
for their strong commitment and expertise demonstrated in this not easy,
time-consumingandveryimportanttask.Wewouldliketothankthepersonsofthe
v
vi PrefaceandAcknowledgements
Organizing Committee that allowed the conference to be held and in particular
Ph.D.GaetanoSequenziaforhisworkinallphasesofConferenceorganizationand
management, his support to the Program Chair during the review process and the
communication to authors, invited speakers, sponsors and so on.
Catania, Italy Salvatore Massimo Oliveri
Rende, Italy Sergio Rizzuti
Organization Committee
Conference Chair
Salvatore Massimo Oliveri, Univ. Catania
Conference Program Chair
Sergio Rizzuti, Univ. della Calabria
Conference Advisory Chairmen
Benoit Eynard, UT Compiègne
Xavier Fischer, ESTIA
Vincenzo Nigrelli, Univ. Palermo
Guillermo Peris-Fajarnes, Univ. Polit. Valencia
Scientific Committee
Angelo Oreste Andrisano, Univ. Modena e Reggio Emilia
Fabrizio Micari, Univ. Palermo
Fernando J. Aguilar, Univ. Almería
Pedro Álvarez, Univ. Oviedo
Agustín Arias, Univ. País Vasco
Sandro Barone, Univ. Pisa
Antonio Bello, Univ. Oviedo
Alain Bernard, Ecole Centrale Nantes
Jean-François Boujut, Grenoble INP
Daniel Brissaud, Grenoble INP
Fernando Brusola, Univ. Polit. Valencia
vii
viii OrganizationCommittee
Enrique Burgos, Univ. País Vasco
Gianni Caligiana, Univ. Bologna
Monica Carfagni, Univ. Firenze
Antonio Carretero, Univ. Polit. Madrid
Pierre Castagna, Univ. Nantes
Patrick Charpentier, Univ. Lorraine
Vincent Cheutet, INSA Lyon
Gianmaria Concheri, Univ. Padova
Paolo Conti, Univ. Perugia
David Corbella, Univ. Polit. Madrid
Daniel Coutellier, ENSIAME
Alain Daidié, INSA Toulouse
Jean-Yves Dantan, ENSAM Metz
Beatriz Defez, Univ. Polit. Valencia
Paolo Di Stefano, Univ. L’Aquila
Emmanuel Duc, SIGMA Clermont
Alex Duffy, Univ. Strathclyde
Francisco Xavier Espinach, Univ. Girona
Georges Fadel, Clemson Univ.
Mercedes Farjas, Univ. Polit. Madrid
Jesùs Fèlez, Univ. Polit. Madrid
Gaspar Fernández, Univ. León
Livan Fratini, Univ. Palermo
Benoît Furet, Univ. Nantes
Mikel Garmendia, Univ. País Vasco
Philippe Girard, CNRS-IMS
Samuel Gomes, UTBM
Bernard Grabot, ENI Tarbes
Peter Hehenberger, Johannes Kepler University Linz
Francisco Hernández, Univ. Polit. Cataluña
Isidro Ladrón-de-Guevara, Univ. Málaga
Antonio Lanzotti, Univ. Napoli “Federico II”
Jesús López, Univ. Pública Navarra
Ferruccio Mandorli, Polit. Delle Marche
Mª Luisa Martínez-Muneta, Univ. Polit. Madrid
Christian Mascle, Polytechnique Montréal
Chris McMahon, Univ. of Bristol
Rochdi Merzouki, Univ. Lille
Rikardo Mínguez, Univ. País Vasco
Giuseppe Monno, Polit. Bari
Paz Morer, Univ.Navarra
Javier Muniozguren, Univ. País Vasco
Frédéric Noël, Grenoble INP
César Otero, Univ. Cantabria
Manuel Paredes, INSA Toulouse
OrganizationCommittee ix
Basilio Ramos, Univ. Burgos
Didier Rémond, INSA Lyon
Caterina Rizzi, Univ. Bergamo
Louis Rivest, ETS Montréal
José Ignacio, Rojas-Sola Univ. Jaén
Lionel Roucoules, ENSAM Aix
Carlos San-Antonio, Univ. Polit. Madrid
José Miguel Sánchez, Univ. Cantabria
Jacinto Santamaría-Peña, Univ. La Rioja
Félix Sanz-Adan, Univ. La Rioja
Irene Sentana, Univ. Alicante
Sébastien Thibaud, Univ. Franche Comté
Stefano Tornincasa, Polit. Torino
Christophe Tournier, ENS Cachan
Pedro Ubieto, Univ. Zaragoza
Mercedes Valiente Lopez, Univ. Polit. de Madrid
Jozsef Vancza, MTA SZTAKI
Bernard Yannou, CentraleSupélec
Eduardo Zurita, Univ. Santiago de Compostela
Additional Reviewers
Niccolò Becattini, Polit. Milano
Giovanni Berselli, Univ. Genova
Francesco Bianconi, Univ. Perugia
Elvio Bonisoli, Polit. Torino
Yuri Borgianni, Univ. Bolzano
Fabio Bruno, Univ. Calabria
Francesca Campana, Univ. Roma “La Sapienza”
Nicola Cappetti, Univ. Salerno
Alessandro Ceruti, Univ. Bologna
Giorgio Colombo, Polit. Milano
Filippo Cucinotta, Univ. Messina
Francesca De Crescenzio, Univ. Bologna
Luigi De Napoli, Univ. Calabria
Luca Di Angelo, Univ. L'Aquila
Francesco Ferrise, Polit. Milano
Stefano Filippi, Univ. Udine
Michele Fiorentino, Polit. Bari
Daniela Francia, Univ. Bologna
Rocco Furferi, Univ. Florence
Salvatore Gerbino, Univ. Molise
Michele Germani, Polit. Marche
Lapo Governi, Univ. Firenze