Advanced composite materials and manufacturing engineering : selected, peer reviewed papers from the 2012 International Conference on Advanced Composite Materials and Manufacturing Engineering (CMME2012) October 13-14, 2012, Beijing, China

421 Pages·2012·48.3 MB·English

by  B Xu

Advanced Composite
Materials
and
Manufacturing
Engineering
Edited by
B. Xu
H.Y. Li
Advanced Composite Materials
and Manufacturing Engineering
Selected, peer reviewed papers from the
2012 International Conference on
Advanced Composite Materials and Manufacturing Engineering
(CMME2012),
October 13-14, 2012, Beijing, China
Edited by
B. Xu and H.Y. Li
Copyright  2012 Trans Tech Publications Ltd, Switzerland

All rights reserved. No part of the contents of this publication may be reproduced or
transmitted in any form or by any means without the written permission of the
publisher.

Trans Tech Publications Ltd
Kreuzstrasse 10
CH-8635 Durnten-Zurich
Switzerland
http://www.ttp.net

Volume 583 of
Advanced Materials Research
ISSN print 1022-6680
ISSN cd 1022-6680
ISSN web 1662-8985

Full text available online at http://www.scientific.net

Distributed worldwide by and in the Americas by
Trans Tech Publications Ltd Trans Tech Publications Inc.
Kreuzstrasse 10 PO Box 699, May Street
CH-8635 Durnten-Zurich Enfield, NH 03748
Switzerland USA
Phone: [phone]
Fax: [phone] Fax: [phone]
e-mail: [email protected] e-mail: [email protected]
Preface

2012 International conference on Advanced Composite Materials and Manufacturing
Engineering (CMME2012) is a conference focusing its center on Advanced Composite Materials
and Manufacturing Engineering. The objective of the conference is to provide a forum for different
researchers in different fields especially in Material field to exchange their different findings. The
researchers are from different countries and in different professionals. The conference will bring all
the researchers from all around the world together to share their new findings, thus to promote
academic exchanging.

All the papers accepted had been passed the strict peer-review course before their publication by
TTP. Here, we should show our sincere thanks to all authors for their high-quality papers and their
careful presentations in the conference. At the same time, all reviewers should be thanked too for
their careful work. In addition, all sponsors and all team members of TTP should be especially
thanked too for their hard work and careful edition on CMME2012.

It's the joint efforts of all different parts that they makes our conference be successful.

The Organizing Committee of CMME2012
Committees:
Honorary chair:
S.L. Xue,Maryland University of America
Fitch Chen,Zhongshan University

Organizing Chairs:
X.H Zhan,Nanjing university of Aeronautics
David Yang,Wuhan University of Technology

Organizing Committee:
Z.P. Lv,Huazhong university of science and technology
Q. Huang,Huazhong university of science and technology
Helen Li,Yangtze university
Sara He,Wuhan textile university
Jack Ma,Wuhan textile university
George Liu,Huaxia college Wuhan Polytechnic University
Hanley Wang,Wuchang University of Technology
Diana Yu,Huazhong university of science and technology
Anna Tian,Wuchang University of Technology
Fitch Chen,Zhongshan University
David Bai,Nanjing university of technology
Y. Li,South China normal university
Harry Song,Guangzhou University

Sponsors:
Wuhan institute of technology,China
Beijing Material Research Center,China
International Material Research Society,Hong Kong
Table of Contents
Preface, Committees and Sponsors
Chapter 1: Advanced Composite Materials and Composite Properties of
Materials
Preparation and Properties of Magnesium-Aluminum Matrix Composites Reinforced with
Silicon Carbon Particles
T.W. Zhou, X.R. Liu, R.L. Zhang and Z.Z. Su 3
Research on Synthesis and Performance of Solvent-Free Aluminum-Plastic Composite
Polyurethane Adhesive
Q. Wang, G.X. Chen, S.L. Chen, J.L. Tai and Q.F. Chen 9
Synthesis of Attapulgite Fiber-Aerogel Composite and its Oil Absorption Capacity under
Low Temperature
D.X. Cheng, H.N. Ying, H.C. Jin and Y.L. Zhang 14
Synthesis of AlN Nanowires and Characterization with Properties of Composite Materials
L.H. Shen and N. Wang 18
Mechanical Properties of Functionalized Carbon Nanotube as Reinforcements
C.C. Ling, Q.Z. Xue and X.Y. Zhou 22
Microstructure and Tribological Properties of Self-Lubricating Graphite/Ni60 Composite
Coatings Prepared by Laser Cladding
J.X. Yang, Z.C. Wang, X.H. Miao and X.B. Wang 27
Processing and Mechanical Properties of Starch and PVA Composite Reinforced by MCC
W.Y. Liu, K. Tan, Y.G. Huang, Y. Chen, X.G. Li, J.H. Yang, P. Jiang and Y.J. Liu 32
The Electrical Resistivity of B C Modified Phenol-Formaldehyde Resin Matrix Composite
4
Materials Pyrolyzed at Different Temperatures
H.Y. Jiang, J.G. Wang, S.Q. Wu and W.L. Zhang 36
Packaging Properties of Composite Film Made up of Polylactic Acid (PLA) and Triacetin
W.L. Zhang, H.Y. Jiang, W. Weng, R.M. Wu and Q.L. Liu 40
Preparation and Treatment for Oral Ulcer of Quercetin and the Drug-Loaded Chitosan
Composite Material
L. Guo, Z.Y. Zhao, J. Bai and S.Y. Han 44
The Wood Composite Materials of Table Tennis Bat and Batting Techniques
Z.H. Wang, R.J. Yuan and X.B. Fan 49
Study of Heat-Resistant Cotton Stalk Bast Fibers Reinforced Polylactic Acid Composites
Z. Wu, C.Y. Wei, Y.Z. Cui, L.H. Lv and X. Wang 53
Vibration Characteristics Analysis of Aeroengine Composite Blade
Q. Yang, K.Q. Fang and C. Shao 57
Study on the Preparation and Properties of Nano-SiC/MC Nylon 6 Composites
B.F. Huang, J.J. Wang, H.X. Liang and Z.Y. Li 62
Properties of Phase Functions for Biological Materials with Properties of Composite
Materials and their High-Order Parameters
X.J. Zhang, Y. Li and W. Yang 66
Research on the Flame-Retardant Property of Continuous Basalt Fiber Based on Basic
Properties of Advanced Composite Materials
S.S. Jia, L.H. Yang and R.H. Wu 71
Electrochemical Analysis and Applications of New Carbon Materials with Properties of
Composite Materials
X. Hua, G.J. Shen and Y. Du 75
Study on Glass Forming Ability for the Nd Co Al Alloys
60-x 15+x 25
Y.J. Tang, H. Xu, X.H. Tan, H. Man and Q. Bai 82
CeO /TiO Nanotubes Composites: Synthesis, Characterization, and Photocatalytic
2 2
Properties
H.B. Li, X.Y. Li, Y.D. Song, S.G. Chen, Y. Wang, C.Y. Sui and C. Jiang 86
b Advanced Composite Materials and Manufacturing Engineering
Composite Materials and Bone Tissue Engineering in Sports Injury
Z.Y. Xia, J.Y. Hou and K. Li 91
Genotoxicity Assessment of Advanced Composite Material – Silicone Gel-Filled Breast
Implant after Radiation Sterilization
W. Liu, Y. Yang and Q.F. Liu 95
A Study for Damage Mode of Composite Aircraft Structure with Advanced Composite
Materials
Y. Gao, N. Li and B. Liu 100
Reaction Kinetics and Optical Storage Characters of a New Diarylethene Materials with
Composite Properties
S.Q. Cui, Y.H. Yang and S.Z. Pu 105
Study on Composite Properties of a Novel Unsymmetrical Diarylethene with Benzene Unit
W.W. Geng, S.Q. Cui and S.Z. Pu 109
Synthesis and Application of a New Diarylethene with Composite Properties for
Polarization Holographic Recording
S.H. He, G. Liu and S.Q. Cui 113
Photochromic Composite Properties and Application in Optical Memory of a Diarylethene
with Benzofuran Unit
S.H. Jing, S.Q. Cui and S.Z. Pu 117
Study on Advanced Composite Synthesis of a New Photochromic Diarylethene Materials
with Bearing Thiophene Units
H. Li, Y.M. Tu and G. Liu 121
Synthesis, Photochromism and Optical Recording Properties of a Diarylethene Materials
Bearing an Isoxazole Unit
X.T. Li, H. Li and G. Liu 125
Study on Photochromic and Optical Storage Composite Properties of a Novel Diarylethene
Bearing Isoxazole Unit
X. Li, W.J. Liu and G. Liu 130
Study on Composite Photochromic Properties of New Diarylethenes Bearing Naphthyl
Rings
P.P. Ren and S.Z. Pu 134
Study on Composite Synthesis and Properties of a Novel Diarylethene Material Bearing
Nitrile Group
Z.P. Tong, S.Q. Cui and S.Z. Pu 138
Study on Strengthening Glued-Laminated Timber with Aramid Cords and Properties of
Composite Materials
M. Rajczyk and D. Jończyk 142
Impact of Glass Sheets Rigidity on Loads Interaction in an Insulating Glass Unit with
Properties of Composite Materials
Z. Respondek and M. Rajczyk 146
The Effects of Fiber Volume Fraction on the Experiment Modal Behavior of 45°/-45°
Carbon Fiber Plain Woven Fabric/Epoxy Resin Composites
Q. Liu, X.Y. Pei and J.L. Li 150
Concrete Composite Properties with Modified Sodium Bentonite in Material Application
Engineering
J. Rajczyk and B. Langier 154
The Structures and Electronic Properties of Composite Material (La Al ) O from First-
x 1-X 2 3
Principles Study
H.Y. Yan, Y.R. Guo and Q.G. Song 158
Preparation of Composite Iron Oxides via Hydrothermal Process
J.Z. Huo 162
Application of ANSYS in Electric Field Distribution of Ti-Al Layered Composite Materials
S.G. Zhou and P.X. Zhu 167
Preparation and Performance Evaluation of the Analgesic and Anti-Inflammatory Effects
of Chitosan Composite Materials
L. Guo, Z.Y. Zhao, J. Bai, S.Y. Han and X. Zhao 171
Mold Electromagnetic Stirring for Horizontal Continuous Casting of CuCrZr Alloys with
Composite Properties
H.Q. Li, Z.W. Hu, D.W. Deng, C.J. Xiang, Z.P. Chen and X. Zhang 175
B. Xu and H.Y. Li c
Experimental Research on the Low Velocity Impact Damage of CCF300/QY8911 Composite
Laminates
H.M. Hong, M. Li, J.Y. Zhang and Y.N. Zhang 179
The Effect of Corner Form on Thermal Transport of Z-Shaped Graphene Nanojunctions
with Composite Properties of Crystal
Z.G. Bao and H.Q. Yang 183
Study on Composite Optics Properties of FeCl ·4H O Crystal in Material Engineering
2 2
F. Miao and Y. Huang 187
Study of Glass Composite Structure Displacement Stressed by Atmospheric Factors
Z. Respondek and M. Rajczyk 191
Production of Composite Glass with Increased Mechanical Properties
Z. Respondek 195
Fabrication and Luminescence Properties of Y O :Eu3+/AAO Composite
2 3
S.W. Li and S.G. Ju 199
Compressive Strength of CCF300/QY8911 Composite Laminates with LVI Damage
H.M. Hong, M. Li, J.Y. Zhang and Y.N. Zhang 203
Knittability of Basalt Fiber Weft-Knitted Fabrics for Composite Reinforcement Based on
Properties of Advanced Composite Materials
Q.M. Wang, X. Yang, J. Gao and P.F. Song 207
Performance of Chloride Binding by Aluminate Hydrates in Cement-Based Composite
Materials
M.F. Gou and X.M. Guan 211
Effect of Ti(C,N) Content on Microstructure and Mechanical Properties of Ti(C,N)/Fe
Composites
R.F. Wang, Z.P. Sun, L.Y. Zou and G.J. Zhang 215
Effect of VC Content on Microstructure and Mechanical Properties of VC/Fe-Based
Composites
R.F. Wang, Z.P. Sun, G.J. Zhang and L.Y. Zou 219
Synthesis and Performance of LiNi Mn O as Cathodes for Li-Ion Batteries with the
0.45 0.55 2
Composite Properties of Materials
L.Z. Zhao, X.K. Chang, C.F. Wu and J.C. Zhang 223
Study of Flame-Retardant Cotton Stalk Bast Fibers Reinforced Polylactic Acid Composites
Z. Wu, C.Y. Wei, Y.Z. Cui, L.H. Lv and X. Wang 228
The Soleplate Materials and Performance of Table Tennis Bat with the Composite
Properties of Materials in Material Engineering
W.M. Sun, S.Q. Zhang and S.R. Hao 232
Synthesis and Characterization of Caged Phosphate Microparticles Coated with Melamine
Resin Based on Composite Properties of Materials
X.M. Fang, Y.Q. Xu and T. Ding 236
Crawling Pipeline of Pink-and-White Research and Design with Composite Properties of
Materials
H.P. Liu and E.B. Peng 240
Study on Scavenging Free Radical Activity with Polysaccharides Materials in Chuanxiong
Based on Composite Properties of Biomaterials
Y.G. Bi and C.C. Liu 244
Chapter 2: Materials and Mechanics Study in Manufacturing
Engineering
Study on the Formability and Friction of Hot Forging Process of a Spur Gear Shaft for
Manufacturing Engineering
G.C. Wang, B.H. Hao, F.X. Pei and T. Wang 251
The Study on Application of Artificial Board Materials in Musical Instrument-
Manufacturing Engineering
H.Y. Zhang 255
Study on Tool Wear of Indexable Coating Inserts for Turning Inconel 718
Z.F. Liu, L. Peng and Z.D. Lv 259
d Advanced Composite Materials and Manufacturing Engineering
Mechanical Properties of Composites with Embedded FBG Sensors in Manufacturing
Engineering
W.J. Wang, H. Song, W. Guo and N. Sheng 263
Microstructures and Properties of Al-Cu-Si Brazing Foils by Melt-Spun Processing
W.Y. Yu, W.J. Lu and N.R. Li 268
Structural and Magnetic Properties of Different Temperature Sintering La-Substituted
Barium Ferrite
J. Li, H.W. Zhang, Y.X. Li, Q. Li and Y.B. Ma 272
Numerical Simulation of Sheet Metal without Burr in the Process of Blanking Based on
DEFORM for Manufacturing Engineering
S.T. Fan and Y. Wu 276
The Research on D107 Electrode Repairment of Weld Surface Defects of Steel Sphere in
Material Engineering
D.M. Zhao and X.P. Liu 281
The Study on Solid Superacid Synthesis of K12A with Manufacturing Equipment
D.M. Zhao and X.P. Liu 285
Research on Electrochemical Micro-Machining in Manufacturing Engineering by Using
Hollow Structure Cathode to Improve Current Stability
J. Wu, H. Wang, X.L. Zhao, G.F. Ding, Y. Huang and D. Zhang 289
Dynamic Property Analysis of Mini Wind Generator for Manufacturing Engineering by
FEM Analysis Based on Plastic Properties of Structure Materials
S.F. Wang 293
Study on the Effect of Slenderized Wool on Knitting Performance in Manufacturing
Engineering
S.S. Jia, L.H. Yang and H.X. Bai 297
Power Spinning Study of Thin-Walled 5A06 Aluminum Alloy Cylinder with Longitudinal
and Hoop Inner Ribs for Manufacturing Engineering
H.Q. Xu, M.Z. Li, L.L. Li, R. Zhang, D.L. Wang, W. Liang and Y.J. Shen 301
Microstructure Evolution of a HSLA Offshore Steel with Cooling Rates
Y.T. Chen, K.G. Zhang and J.H. Cheng 306
Synthesis and Properties Study of a New Perfluorocyclopentenes Bearing Naphthyl Unit for
Manufacturing Engineering
H.C. Ding, C.H. Zheng and G. Liu 310
Study on Improved Grinding Process of Sapphire with LED Substrate Material in
Manufacturing Engineering
H. Zhou, X.M. Xu, Z.G. Zhuo, Y. Zang, L.X. Xu and H. Feng 314
Dynamic Compressive Properties of Vulcanized Rubber Material from a Split Hopkinson
Pressure Bar Experiment in Rubber Manufacturing
P. Ye, C.H. Wu and Z.F. Liu 318
The Applied Research of New Type Fiber Material on the Manufacture of Sports
Equipment
Z. Wang, M.M. Sun and D. Li 322
Molecular Dynamics Simulation of Thermodynamic Properties for Al-Si Alloys in Material
Manufacturing Engineering
L.F. Li and X.F. Zhang 326
Chapter 3: Material Engineering and Material Application Engineering
Nanosecond Excimer Laser Ablation (W,Ti)C-Co Cemented Carbide
J.X. Yang, X.H. Miao, Z.C. Wang and X.B. Wang 333
Effects of Oxalic Acid and Sodium Chloride on the Superhydrophobic Surface on
Aluminum Alloy by Anodizing and PP-Coating
W.Y. Liu, Y.T. Luo, L.Y. Sun, R.M. Wu, H.Y. Jiang and Y.J. Liu 338
Facile Preparation of the Superhydrophobic Surface on Aluminum Alloy by PP-Coating
W.Y. Liu, L.Y. Sun, Y.T. Luo, R.M. Wu, H.Y. Jiang and Y.J. Liu 342
Bacteriostasis of a Super-Hydrophobic Micro-Porous Aluminum Surface by a Facile
Preparation Method
R.M. Wu, H.Y. Jiang, W.Y. Liu, J. Deng, Z.Q. Yuan, Q.L. Liu and H. Chen 346