4th International Symposium on High Temperature Metallurgical Processing

702 Pages·2013·31.508 MB·English

by  Tao Jiang,Jiann-Yang Hwang,Phillip J. Mackey, et al.John Wiley & Sons, Inc.|Wiley||Wiley-TMSAdult NonfictionTechnologyLanguage(s): EnglishOn sale date: 01.03.2013Street date: 21.02.2013Preview

4th International
Symposium on
High-Temperature
Metallurgical
Processing
TIMIS2013
nd
142 Annual Meeting & Exhibition
Check out these new proceedings volumes from the TMS2013
Annual Meeting, available from publisher John Wiley & Sons:
4th International Symposium on
High-Temperature Metallurgical Processing
Characterization of Minerals, Metals, and Materials 2013
Energy Technology 2013
EPD Congress 2013
Friction Stir Welding and Processing VII
Light Metals 2013
Magnesium Technology 2013
Materials Processing Fundamentals
Ni-Co2013
REWAS 2013 (CD)
Supplemental Proceedings
To purchase any of these books, visit www.wiley.com.
TMS members: Log in to the Members Only area of
www.tms.org and learn how to get your discount
on these and other books offered by Wiley.
4th International
Symposium on
High-Temperature
Metallurgical
Processing
Proceedings of a symposium sponsored by
the Pyrometallurgy Committee and
the Energy Committee of
the Extraction and Processing Division of
TMS (The Minerals, Metals & Materials Society)
Held during the
TMS 2013 Annual Meeting & Exhibition
San Antonio, Texas, USA
March 3-7, 2013
Edited by
Tao Jiang
Jiann-Yang Hwang
Phillip J. Mackey
Onuralp Yucel
Guifeng Zhou
WILEY TIMS
A John Wiley & Sons, Inc., Publication
Copyright © 2013 by The Minerals, Metals & Materials Society.
All rights reserved.
Published by John Wiley & Sons, Inc., Hoboken, New Jersey.
Published simultaneously in Canada.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form
or by any means, electronic, mechanical, photocopying, recording, scanning, or otherwise, except as
permitted under Section 107 or 108 of the 1976 United States Copyright Act, without either the prior
written permission of The Minerals, Metals, & Materials Society, or authorization through payment of
the appropriate per-copy fee to the Copyright Clearance Center, Inc., 222 Rosewood Drive, Danvers,
MA 01923, [phone], fax [phone], or on the web at www.copyright.com. Requests to
the Publisher for permission should be addressed to the Permissions Department, John Wiley & Sons,
Inc., Ill River Street, Hoboken, NJ 07030, [phone], fax [phone], or online at http://
www.wiley.com/go/permission.
Limit of Liability/Disclaimer of Warranty: While the publisher and author have used their best efforts
in preparing this book, they make no representations or warranties with respect to the accuracy or
completeness of the contents of this book and specifically disclaim any implied warranties of mer-
chantability or fitness for a particular purpose. No warranty may be created or extended by sales rep-
resentatives or written sales materials. The advice and strategies contained herein may not be suitable
for your situation. You should consult with a professional where appropriate. Neither the publisher nor
author shall be liable for any loss of profit or any other commercial damages, including but not limited
to special, incidental, consequential, or other damages.
Wiley also publishes books in a variety of electronic formats. Some content that appears in print may
not be available in electronic formats. For more information about Wiley products, visit the web site
at www.wiley.com. For general information on other Wiley products and services or for technical sup-
port, please contact the Wiley Customer Care Department within the United States at [phone],
outside the United States at [phone] or fax [phone].
Library of Congress Cataloging-in-Publication Data is available.
ISBN 978-1-11860-569-1
Printed in the United States of America.
10 987654321
WILEY TIMS
A John Wiley & Sons, Inc., Publication
TABLE OF CONTENTS
4th International Symposium on High-
Temperature Metallurgical Processing
Preface xiii
About the Editors xv
High Efficiency New Metallurgical Technology
A New Copper Smelting Technology - Bottom Blown Oxygen Furnace
Developed at Dongying Fangyuan Nonferrous Metals 3
B. Zhao, Z. Cui, and Z. Wang
A Novel Vacuum Aluminothermic Reduction Lithium Process 11
Y. Di, Z. Wang, S. Tao, andN. Feng
Study on Double-Layered Pellet Roasting of Sulfur and Arsenic-Bearing
Gold Concentrate 19
T. Jiang, X. Li, J. Ge, L. Cui, Q. Li, and Y. Yang
Preparation of M00 from Ammonium Tetramolybdate in Microwave
3
Fields 27
J. Li, L. Zhang, G Chen, J. Peng, B. Liu, and H. Xia
Looping Sulfide Oxidation™ Process for Anode Copper Production 37
L. Shekhter, C. Anderson, D. Gribbin, E. Cankaya-Yalcin,
J. Lessard, and L. McHugh
Direct Redaction of TI-V Magnetite Via ITmk3 Technology 45
N. Panishev, B. Dubrovsky, A. Starikov, E. Redin, andE. Knyazev
Research and Industrial Application of Oxygen-rich Side-blow Bath
Smelting Technology 49
L. Chen, W. Bin, T. Yang, W. Liu, and S. Bin
Thermal Plasma Torches for Metallurgical Applications 57
L. Rao, F. Rivard, and P. Carabin
v
Research on Removal of Potassium and Sodium by Pre-reduction Sintering 67
Q. Li, Z. Jing, Y. Yang, T. Jiang, G Li, andX. Chen
Fundamental Research of Metallurgical Process
Reaction Mechanisms and Product Morphologies on Gaseous Reduction of
Metal Compounds - Extractive Metallurgy Meets Materials Science 77
P. Hayes
Research on the Slag Phase Type of Vanadium-Titanium Magnetite in
Pre-Reduction-Electric Furnace Smelting 87
Y. Guo, M. Tang, T. Jiang, L. Qing, and J. Zhou
Density of CaO-5%MgO-Al 0 -Si0 Slag with Low Silica 95
2 3 2
J. Li, T. Zeng, J. Xu, C. Jie, J. Zhang, and K. Chou
Study on Magnetic Roasting Kinetic of Oolitic Hematite 103
Y. Guo, L. Qing, T. Jiang, L. Yang, S. Liu, M. Tang, X. Song,
andJ. Zhou
Basic Research on External Desulfurization of Hot Iron by Dolomite Ill
X. Ren, T. Zhang, Y. Liu, Z. Dou, and G Lv
Iron-Carbon Nuggets Coalescence: Influence of Slag's Liquidus
Temperatures 117
A. Nogueira, C. Takano, M. Mourào, and A. Pillihuaman
Effect of Mixed Charge of Ore and Lump Coal on the Softening-Melting
Property of the Burden 125
H. Guo, G Yang, J. Zhang, J. Shao, Y. Fu, and D. Wan
Effects of Oxygen Content and Roasting Temperature on the Sintering
Mineralization Properties of Different Iron Ores 131
X. Mao, Z. You, Y. Zhang, Z. Fan, and T. Jiang
Analysis on Wear Mechanism of Refractories Used in Hot Air Pipeline for
Large Scale Blast Furnaces 139
G Xu, X. Chen, X. Huang, W. Xiang, and H Zhang
VI
Alloy and Materials Preparation I
Hot Workability of M42 Tool Steel Additionally Alloyed with Co and Mo ....147
M. Tercelj, G Kugler, M. Fazarinc, and I. Perm
Effects of Crystallization of Mould Fluxes on Property of Liquid Slag Film
and Its Impact onPeritectic Steel Slab Continuous Casting 155
X. Long, S. He, L. Zhu, T. Wu, and Q. Wang
Hot Ductility of Nb-V Containing Microalloyed Steel during Solidification...163
Y. Sun, Y. Zeng, andK. Cai
Co-Cr-Mo Alloys Production by Self Propagating High Temperature
Synthesis 171
O. Okur, M. Alkan, and O. Yiicel
High-Temperature Oxidation and Corrosion Behaviors of Ni-Fe-Cr Alloy
for Inert Anode Materials in Aluminum Electrolysis 177
J. Xue, L. Feng, G Ndong, J. Zhu, and Q. Liu
Production of Molybdenum Containing Iron Based Alloys via
Metallothermic Processes 185
D. Kirgöz, M. Alkan, and O. Yiicel
Electrical Resistance of TiB -C/C Function Gradient Materials for Aluminum
2
Reduction Cathodes 191
J. Zhu, J. Xue, and B. Li
Experimental Study of Phosphorus Distribution Between Slag and Metal
during Duplex Dephosphorus Converter Processing 199
X. Qiu, B. Xie, L. Jiang, X. Zhang, J. Diao, and H. Li
The Effect of Aluminum Addition to the ESR Process Slag on IN718
Superalloy Characteristics 207
A. Sheikhhosseini, and S. Abbasi
Alloy and Materials Preparation II
Production of Fe-Based Alloys by Metall othermic Reduction of Mill Scales
from Continuous Casting Processes 219
M. Bugdayci, M. Alkan, and O. Yiicel
Study of Heat Flux in CSP Continuous Casting Mold 227
W. Yang, X. Wang, L. Zhang, D. Yang, andX. Liu
vn
The Effect of Thermomechanical Ageing of Aluminium-Copper Alloy
(MATLAB Approach) 239
A. Amos, G Akeem, F. Emmanuel, O. Ajibade, and O. Oladayo
Research on Inclusions in CuCr Alloy Prepared by Thermit Reduction 247
Z. Dou, T. Zhang, G Shi, Y. Du, L. Niu, G Lv, Y. Liu, and J. He
Copper-Based Multi-Component Alloys by Vacuum Distillation to Separate
Copper Enriched Lead, Silver and Other Valuable Metals Research 255
H. Xiong, B. Yang, D. Liu, B. Xu, X. Chen, and Y. Deng
An Overview of Research on Au & Ag Recovery in Copper Smelter 265
Y. Shi, and Z. Ye
The Analysis of Orthogonal Experiment Method of Carbon-Coated
LiNi/3Mn Co/302 via Microwave-pyrolysis Method 277
1 1/3 1
Y. Han, Z. Zhang, L. Zhang, J. Peng, and M. Fu
Comparative Study on the Metal Aluminum Produced from Alumina by
Carbothermic Reduction and Carbothermic-Chlorination 287
Q. Yu, B. Yang, Y. Deng, F. Wang, H Xiong, and M. Chen
Continuously Synthesis and Performance of Cathode Material
LiNi/Co/Mn/02 for Lithium Ion Batteries 293
13 13 13
M. Fu, L. Zhang, Z. Zhang, J. Peng, Y. Han, and J. Du
Tensile Mechanical Properties and Brittle Effect of Austempered Cr-Mo Alloy
Steel 299
C Chen, F. Hung, T. Lui, and L. Chen
Roasting, Reduction and Smelting
Cost Benefits of EAF Bottom Purging Systems Due to Metallurgical
Improvements 309
M. Kirschen, A. Hanna, andK. Zettl
Researches on Reduction Roasting of Low-Grade Manganese Oxide Ores
Using Biomass Charcoal asReductant 317
Y. Zhang, D. Duan, Z. You, G Li, X. Fan, and T. Jiang
Reduction Behavior of Pellets Balled with Bentonite 325
T. Jiang, G Han, Y. Huang, G Li, and Y. Zhang
vin